SS10PH10HM3/87A

SS10PH9, SS10PH10 www.vishay.com Vishay General Semiconductor High Current Density Surface Mount High Voltage Schottky Rectifiers FEATURES eSMP ® Series • Power pack Available • Very low profile - typical height of 1.1 mm K • Ideal for automated placement • Guardring for overvoltage protection 1 • High barrier technology, TJ = 175 °C maximum • Low leakage current 2 • Meets MSL level 1, per J-STD-020 TO-277A (SMPC) K Cathode • AEC-Q101 qualified available - Automotive ordering code: base P/NHM3 Anode 1 • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 Anode 2 PRIMARY CHARACTERISTICS TYPICAL APPLICATIONS IF(AV) 10 A VRRM 90 V, 100 V IFSM 200 A EAS 20 mJ VF at IF = 10 A 0.661 V IR 0.3 μA TJ max. 175 °C Package TO-277A (SMPC) Diode variations Single die For use in high frequency rectifier of switching mode power supplies, freewheeling diodes, DC/DC converters, or polarity protection application. MECHANICAL DATA Case: TO-277A (SMPC) Molding compound meets UL 94 V-0 flammability rating Base P/N-M3 - halogen-free, RoHS-compliant, and commercial grade Base P/NHM3 - halogen-free, RoHS-compliant, and AEC-Q101 qualified Base P/NHM3_X - halogen-free, RoHS-compliant, and AEC-Q101 qualified (“_X” denotes revision code e.g. A, B, .....) Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 M3 suffix meets JESD 201 class 2 whisker test, HM3 suffix meets JESD 201 class 2 whisker test MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL Device marking code SS10PH9 SS10PH10 10H9 10H10 90 100 UNIT V Maximum repetitive peak reverse voltage VRRM Maximum average forward rectified current (fig. 1) IF(AV) 10 A Peak forward surge current 10 ms single half sine-wave  superimposed on rated load IFSM 200 A Non-repetitive avalanche energy at IAS = 2.0 A, TJ = 25 °C EAS 20 mJ TJ, TSTG -55 to +175 °C Operating junction and storage temperature range Revision: 23-Dec-14 Document Number: 89000 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SS10PH9, SS10PH10 www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS IF = 5 A IF = 10 A Instantaneous forward voltage IF = 5 A IF = 10 A Reverse current Rated VR Typical junction capacitance 4.0 V, 1 MHz SYMBOL TA = 25 °C VF (1) TA = 125 °C TA = 25 °C IR (2) TA = 125 °C CJ TYP. MAX. 0.725 - UNIT 0.800 0.88 0.581 - 0.661 0.74 0.3 10 μA 0.3 3 mA 270 - pF V Notes (1) Pulse test: 300 μs pulse width, 1 % duty cycle (2) Pulse test: Pulse width  40 ms THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise specified) PARAMETER SYMBOL Typical thermal resistance SS10PH9 SS10PH10 RJA (1) 60 RJL 3 UNIT °C/W Note (1) Units mounted on recommended PCB 1 oz. pad layout ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PACKAGE CODE BASE QUANTITY DELIVERY MODE 0.10 86A 1500 7" diameter plastic tape and reel 13" diameter plastic tape and reel SS10PH10-M3/86A SS10PH10-M3/87A 0.10 87A 6500 SS10PH10HM3/86A (1) 0.10 86A 1500 7" diameter plastic tape and reel SS10PH10HM3/87A (1) 0.10 87A 6500 13" diameter plastic tape and reel SS10PH10HM3_A/H (1) 0.10 H 1500 7" diameter plastic tape and reel SS10PH10HM3_A/I (1) 0.10 I 6500 13" diameter plastic tape and reel Note AEC-Q101 qualified (1) RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise specified) 9.0 Resistive or Inductive Load 7.5 10 Average Power Loss (W) Average Forward Rectified Current (A) 12 8 6 4 TL measured at the Cathode Band Terminal 2 D = 0.8 D = 0.5 D = 0.3 6.0 D = 0.2 4.5 D = 1.0 D = 0.1 T 3.0 1.5 D = tp/T 0 tp 0 25 50 75 100 125 150 175 0 1 2 3 4 5 6 7 8 9 10 11 Lead Temperature (°C) Average Forward Current (A) Fig. 1 - Maximum Forward Current Derating Curve Fig. 2 - Forward Power Loss Characteristics Revision: 23-Dec-14 Document Number: 89000 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SS10PH9, SS10PH10 www.vishay.com Vishay General Semiconductor 100 Transient Thermal Impedance (°C/W) Instantaneous Forward Current (A) 100 TA = 175 °C 10 TA = 150 °C 1 TA = 125 °C 0.1 0.01 0.1 TA = 25 °C 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 Junction to Ambient 10 1 0.01 0.1 1 10 100 Instantaneous Forward Voltage (V) t - Pulse Duration (s) Fig. 3 - Typical Instantaneous Forward Characteristics Fig. 6 - Typical Transient Thermal Impedance Instantaneous Reverse Current (mA) 10 TA = 175 °C 1 TA = 150 °C 0.1 TA = 125 °C 0.01 0.001 0.0001 TA = 25 °C 0.00001 10 20 30 40 50 60 70 80 90 100 Percent of Rated Peak Reverse Voltage (%) Fig. 4 - Typical Reverse Characteristics Junction Capacitance (pF) 1000 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p 100 10 0.1 1 10 100 Reverse Voltage (V) Fig. 5 - Typical Junction Capacitance Revision: 23-Dec-14 Document Number: 89000 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SS10PH9, SS10PH10 www.vishay.com Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) TO-277A (SMPC) 0.187 (4.75) 0.175 (4.45) 0.016 (0.40) 0.006 (0.15) K 0.262 (6.65) 0.250 (6.35) 0.242 (6.15) 0.238 (6.05) 2 1 0.047 (1.20) 0.039 (1.00) 0.171 (4.35) 0.167 (4.25) 0.146 (3.70) 0.134 (3.40) Mounting Pad Layout 0.087 (2.20) 0.075 (1.90) 0.189 (4.80) MIN. 0.189 (4.80) 0.173 (4.40) 0.186 (4.72) MIN. 0.268 (6.80) 0.155 (3.94) NOM. 0.030 (0.75) NOM. 0.049 (1.24) 0.037 (0.94) 0.050 (1.27) MIN. 0.084 (2.13) NOM. 0.053 (1.35) 0.041 (1.05) 0.041 (1.04) 0.055 (1.40) MIN. Conform to JEDEC® TO-277A Revision: 23-Dec-14 Document Number: 89000 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer  ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Revision: 13-Jun-16 1 Document Number: 91000