SS2PH10HM3_A/H

SS2PH9, SS2PH10 www.vishay.com Vishay General Semiconductor High Voltage Surface Mount Schottky Barrier Rectifier High Barrier Technology for Improved High Temperature Performance FEATURES eSMP ® Series • Very low profile - typical height of 1.0 mm Available • Ideal for automated placement • Low forward voltage drop, low power losses • High efficiency • Low thermal resistance • Meets MSL level 1, per LF maximum peak of 260 °C SMP (DO-220AA) Cathode Anode J-STD-020, • AEC-Q101 qualified available - Automotive ordering code: base P/NHM3 • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 DESIGN SUPPORT TOOLS click logo to get started TYPICAL APPLICATIONS For use in high frequency inverters, freewheeling, DC/DC converters, and polarity protection applications. Models Available MECHANICAL DATA PRIMARY CHARACTERISTICS IF(AV) 2.0 A VRRM 90 V, 100 V IFSM 50 A EAS 11.25 mJ VF at IF = 1.0 A 0.62 V IR max. 1.0 μA TJ max. 175 °C Package SMP (DO-220AA) Circuit configuration Single Case: SMP (DO-220AA) Molding compound meets UL 94 V-0 flammability rating Base P/N-M3 - halogen-free, RoHS-compliant, and commercial grade Base P/NHM3 - halogen-free, RoHS-compliant, and AEC-Q101 qualified Base P/NHM3_X - halogen-free, RoHS-compliant, and AEC-Q101 qualified (“_X” denotes revision code e.g. A, B, .....) Terminals: matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 M3 suffix meets JESD 201 class 2 whisker test, HM3 suffix meets JESD 201 class 2 whisker test Polarity: color band denotes the cathode end MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL Device marking code SS2PH9 SS2PH10 29 210 UNIT Maximum repetitive peak reverse voltage VRRM Maximum average forward rectified current (fig. 1) IF(AV) 2.0 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 50 A Non-repetitive avalanche energy at TJ = 25 °C, IAS = 1.5 A, L = 10 mH EAS 11.25 mJ dV/dt 10 000 V/μs TJ, TSTG -55 to +175 °C Voltage rate of change (rated VR) Operating junction and storage temperature range 90 100 V Revision: 13-Aug-2018 Document Number: 84682 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SS2PH9, SS2PH10 www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS Maximum instantaneous forward voltage IF = 2.0 A TJ = 25 °C TJ = 125 °C TJ = 25 °C Maximum reverse current at rated VR TJ = 125 °C Typical junction capacitance 4.0 V, 1 MHz SYMBOL VF (1) TYP. MAX. 0.77 0.80 0.62 0.66 IR (2) CJ UNIT V 0.1 1.0 60 500 65 - pF SS2PH10 UNIT μA Notes (1) Pulse test: 300 μs pulse width, 1 % duty cycle (2) Pulse test: Pulse width  40 ms THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL Typical thermal resistance SS2PH9 RJA (1) 110 RJL (1) 15 RJC (1) 25 °C/W Note (1) Thermal resistance from junction to ambient and junction to lead mounted on PCB with 15 mm x 15 mm copper pad areas. R JC is measured at the top center of the body ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE SS2PH9-M3/84A 0.024 84A 3000 7" diameter plastic tape and reel SS2PH9-M3/85A 0.024 85A 10 000 13" diameter plastic tape and reel SS2PH9HM3/84A (1) 0.024 84A 3000 7" diameter plastic tape and reel SS2PH9HM3/85A (1) 0.024 85A 10 000 13" diameter plastic tape and reel SS2PH9HM3_A/H (1) 0.024 H 3000 7" diameter plastic tape and reel SS2PH9HM3_A/I (1) 0.024 I 10 000 13" diameter plastic tape and reel Note (1) AEC-Q101 qualified RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 50 Peak Forward Surge Current (A) Average Forward Current (A) 2.5 2.0 1.5 1.0 0.5 TL Measured at the Cathode Band Terminal 40 30 20 10 0 0 25 50 75 100 125 150 175 1 10 100 TL - Lead Temperature (°C) Number of Cycles at 50 Hz Fig. 1 - Forward Current Derating Curve Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current Revision: 13-Aug-2018 Document Number: 84682 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SS2PH9, SS2PH10 www.vishay.com Vishay General Semiconductor 1000 Junction Capacitance (pF) Instantaneous Forward Current (A) 100 TJ = 175 °C 10 TJ = 150 °C TJ = 125 °C 1 TJ = 25 °C 0.1 0.2 10 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 0.1 1.2 1 10 100 Instantaneous Forward Voltage (V) Reverse Voltage (V) Fig. 3 - Typical Instantaneous Forward Characteristics Fig. 5 - Typical Junction Capacitance 1000 1000 Transient Thermal Impedance (°C/W) 10 000 Instantaneous Reverse Current (μA) 100 TJ = 175 °C TJ = 150 °C 100 TJ = 125 °C 10 1 0.1 TJ = 25 °C 0.01 10 20 30 40 50 60 70 80 90 100 10 1 0.01 100 0.1 1 10 100 Percent of Rated Peak Reverse Voltage (%) t - Pulse Duration (s) Fig. 4 - Typical Reverse Leakage Characteristics Fig. 6 - Typical Transient Thermal Impedance PACKAGE OUTLINE DIMENSIONS in inches (millimeters) SMP (DO-220AA) 0.012 (0.30) REF. Cathode Band 0.053 (1.35) 0.041 (1.05) 0.086 (2.18) 0.074 (1.88) 0.142 (3.61) 0.126 (3.19) 0.036 (0.91) 0.024 (0.61) 0.103 (2.60) 0.087 (2.20) 0.032 (0.80) 0.016 (0.40) 0.158 (4.00) 0.146 (3.70) 0.105 (2.67) 0.013 (0.35) 0.004 (0.10) 0.025 0.030 (0.635) (0.762) 0.045 (1.15) 0.033 (0.85) 0.012 (0.30) 0.018 (0.45) 0.000 (0.00) 0.006 (0.15) 0.100 (2.54) 0.050 (1.27) Revision: 13-Aug-2018 Document Number: 84682 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer  ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000