ST5TW503

ST-5 Vishay Surface Mount Cermet Trimmers (14 turns) FEATURES • • • • • • Lead (Pb)-free soldering, Cadmium-free Precise adjustment is possible Automatic mounting is possible (Taping) Flow/reflow soldering is possible Sealed construction (Washable) RoHS compliant DIMENSIONS in millimeters RECOMMENDED P.C.B. PAD OUTLINE DIMENSIONS 1.4 (Unit: mm) 1.4 2 ST-5X, EX 2 ST-5W, EW 3 .3 0 2 2 3 .3 0 1.4 1.4 1.4 5 1.4 5 ST-5P, EP ST-5R, ER 1.4 2 2 1.4 5 .7 5 0 2 2 5 .7 5 0 1.4 1.4 1.4 5 1.4 5 Note) The zero point is the center of mounting. Specifications are subject to change without notice. Specifications in this catalog are for reference. The formal specification sheets will be submitted upon request. www.vishay.com 1 For technical questions contact: copalsupport@vishay.com Document Number: 58011 Revision: 06-Mar-06 ST-5 Vishay Surface Mount Cermet Trimmers (14 turns) DIMENSIONS in millimeters OUTLINE DIMENSIONS ST-5W, ST-5EW Top adjustment Unless otherwise specified, tolerance: ± 0.3 (Unit: mm) 3 1 Resistance code & Production date code CW rotation 2.5 2.5 Lead free Identification mark 1 4.3 ST-5X, ST-5EX Side adjustment 1 1 6.75 1 2 3 - 0.5 Ø 1.6, Slot 0.6 W × 0.8 D 3 0.9 6 2 Note the terminal position. 1 6.3 Resistance code, Production date code & Lead free Identification mark Ø 1.6, Slot 0.6 W × 0.8 D 3 6 2.5 2.5 1 2 0.9 3 - 0.5 1 1 1 4.3 6.75 1 6.3 ST-5P, ST-5EP Side adjustment 8.75 1 Resistance code & Production date code 1 Ø 1.6, Slot 0.6 W × 0.8 D 0.9 2.5 2.5 6 2 1 6.75 3 - 0.5 3 Lead free Identification mark 1 4.3 1 ST-5R, ST-5ER Side adjustment Resistance code, Production date code & Lead free Identification mark 8.75 Ø 1.6, Slot 0.6 W × 0.8 D 3 1 1 1 3 - 0.5 1 0.9 2.5 2.5 6 1 2 6.75 4.3 Specifications are subject to change without notice. Specifications in this catalog are for reference. The formal specification sheets will be submitted upon request. Document Number: 58011 Revision: 06-Mar-06 For technical questions contact: copalsupport@vishay.com www.vishay.com 2 ST-5 Vishay Surface Mount Cermet Trimmers (14 turns) DIMENSIONS in millimeters PACKAGING SPECIFICATIONS Taping packaging specifications Taping version is packaged in 500 pcs. per reel. Orders will be accepted for units of 500 pcs., i.e., 500, 1000, 1500 pcs., etc. Taping version is boxed with one reel (500 pcs.). Maximum number of consecutive missing pieces = 2 Leader length and reel dimension are shown in the dia-grams below. EMBOSSED TAPE DIMENSIONS REEL DIMENSIONS (Conforms to JIS C 0806-3) (Unit: mm) (In accordance with EIAJ ET-7200A) Empty Filled Empty End Ø 21 ± 0.8 Head 40 mm min. Ø 80 ± 1 17.4 ± 1 2 ± 0.5 20 pitches min. Leader 400 mm min. Direction of feed Ø 13 ± 0.2 Ø 254 ± 2 (ST-5TP/TR/ETP/ETR) Ø 330 ± 2 (ST-5TW/TX/ETW/ETX) 4 ± 0.1 2 ± 0.1 16 Direction of feed 5 0.4 ± 0.1 Installation example (ST-5W/EW) 16 12 ± 0.1 7.5 ± 0.1 Installation example (ST-5P/EP) +0.1 0 7.5 ± 0.1 0.4 ± 0.1 .5 2 ± 0.1 Ø1 4 ± 0.1 +0.1 0 .5 Ø1 12 ± 0.1 1.75 ± 0.1 ST-5TW/TX/ETW/ETX 1.75 ± 0.1 ST-5TP/TR/ETP/ETR 21.4 ± 1 Direction of feed 8.5 Specifications are subject to change without notice. Specifications in this catalog are for reference. The formal specification sheets will be submitted upon request. Magazine packaging specifications Magazine is packed 50 pcs. per stick. Orders will be accepted for units of 50 pcs., i.e., 50, 100, 150 pcs., etc. Magazines are packed 2000 pcs. per box. Magazine dimensions 8.5 3±1 380 ± 2 (Unit: mm) 3±1 11 Installation example (ST-5W/EW) Stopper Vinyl bag packaging specifications Unit of bulk in vinyl bag packaging is 50 pcs. per pack. Boxing of bulk in vinyl bags is performed with 200 pcs. per box. Specifications are subject to change without notice. Specifications in this catalog are for reference. The formal specification sheets will be submitted upon request. Document Number: 58011 Revision: 06-Mar-06 For technical questions contact: copalsupport@vishay.com www.vishay.com 3 ST-5 Vishay Surface Mount Cermet Trimmers (14 turns) MECHANICAL SPECIFICATIONS ENVIRONMENTAL SPECIFICATIONS Mechanical turn 14 turns Test item Operating torque 20 mN m {204 gf cm} maximum Mechanical stop Clutch action Rotational life 200 cycles 10 Ω ∼ 200 Ω [ΔR/R ≤ ± (0.5 Ω + 3 %] 500 Ω ∼ 2 MΩ [ΔR/R ≤ ± (0.5 Ω + 2 %] Thrust to shaft 5 N {0.51 kgf} minimum Solderability Sn-Pb: 235 °C, 2 s Sn (Lead-free): 245 ± 3 °C, 2 ∼ 3 s Shear (Adhesion) 5 N {0.51 kgf} 10 s Substrate bending Width 90 mm, bend 3 mm, 5 s, 1 time Pull-off strength 5 N {0.51 kgf} 10 s Test conditions Specifications Thermal shock - 65 ∼ 125 °C (0.5 h), 5 cycles [ΔR/R ≤ 2 %] [S.S. ≤ 1 %] Humidity - 10 ∼ 65 °C (Relative humidity 80 ∼ 98 %), 10 cycles, 240 h Shock 981 m/s2, 6 ms 6 directions for 3 times each Vibration Amplitude 1.52 mm or Acceleration 196 m/s2, 10 ∼ 2000 Hz, 3 directions, 12 times each [ΔR/R ≤ 1%] [S.S. ≤ 1 %] Load Life 85 °C, 0.25 W, 1000 h [ΔR/R ≤ 3 %] [S.S. ≤ 1 %] Low temperature operation - 55 °C, 2 h [ΔR/R ≤ 2 %] [S.S. ≤ 2 %] High temperature exposure 120 °C, 250 h [ΔR/R ≤ 3 %] [S.S. ≤ 2 %] 85 °C, 60 s No leaks (No continuous bubbles) ELECTRICAL CHARACTERISTICS Nominal resistance range 10 Ω ∼ 2 MΩ Resistance tolerance ± 10 % 0.25 W (85 °C) 0 W (120 °C) Power ratings Resistance law Linear law (B) Maximum input voltage DC200 V or power rating, whichever is smaller Maximum wiper current 100 mA or power rating, whichever is smaller Effective electrical turn Immersion seal Sn-Pb 260 °C, 10 s or 215 °C, 35 s 11 turns End resistance 1 % or 2 Ω, whichever is greater C.R.V. 1 % or 3 Ω, whichever is greater - 55 ∼ 120°C Operating temp. range 10 Ω ∼ 50 Ω: ± 250 10-6 /°C maximum 100 Ω ∼ 2 MΩ: ± 100 10-6 /°C maximum Temp. coefficient Insulation resistance 1000 MΩ minimum (DC500 V) Dielectric strength AC600 V, 60 s Net weight Approx. 0.35 g [ΔR/R ≤ 2 %] Soldering heat Sn Flow: 260 °C ± 3 °C as the temperature in a pot of molten solder, immersion from head of terminal to backside of board, 5 ∼ 6 s, two times maximum Reflow: Peak temperature 255 °C (Please refer to the profile below.) Manual soldering: 350 ± 10 °C, 3 ∼ 4 s [ΔR/R ≤ 1 %] Reflow profile for soldering heat evaluation (°C) 250 Peak : 250 0 °C 200 Pre Heating Zone +5 Temperature Over 230 °C 150 180 °C 150 °C 90 ± 30 s 100 50 30 ± 10 s Heating time Soldering Zone Reflow : two times maximum Document Number: 58011 Revision: 06-Mar-06 For technical questions contact: copalsupport@vishay.com www.vishay.com 4 ST-5 Surface Mount Cermet Trimmers (14 turns) Vishay MAXIMUM INPUT RATINGS CONSTRUCTION Maximum input voltage (V) Maximum wiper current (mA) 100 1.00 100 200 2.00 100 Nominal resistance values (Ω) Resistance code 10* 20* Part Name Material Flammability UL-94V-O 1 Housing Polyphenylenesulphide 2 Shaft Brass, Nickel-plated 3 Terminal pin Sn-Pb Copper, Solder-plated - Sn Copper, Tin-plated - 50 500 3.53 70.7 100 101 5.00 50.0 4 Base element Ceramic - 200 201 7.07 35.4 5 Electrode Ag-Pd cermet - 500 501 11.2 22.4 6 Resistive element RuO2 cermet 1k 102 15.8 15.8 7 Wiper 2k 202 22.4 11.2 8 Adhesive Rubber cushion - Multi metal alloy 5k 502 35.4 7.07 9 10 k 103 50.0 5.00 10 Rotor gear 20 k 203 70.7 3.54 50 k 503 112 2.24 100 k 104 158 1.58 200 k 204 200 1.00 500 k 504 200 0.40 1M 105 200 0.20 2M 205 200 0.10 - Epoxy Silicone rubber PA (Polyamide) UL-94HB CFC’s, Halon, Carbon tetrachloride and designated bromic flame retardant PBBOs and PBBs are not used in our products. 1 10 2 9 The products indicated by * mark are manufactured upon receipt oforer basis 3 4 5 6 7 8 LIST OF PART NUMBERS Form of packing Taping (reel) Adjustment position Magazine (stick) Vinyl bag Shape of terminal Sn-Pb Sn (Lead (Pb)-free) Sn-Pb Sn (Lead (Pb)-free) Sn-Pb Sn (Lead (Pb)-free) Top adjustment W (Gull-wing) ST-5TW ST-5ETW ST-5MW ST-5EMW ST-5W ST-5EW Side adjustment X (Gull-wing) ST-5TX ST-5ETX ST-5MX ST-5EMX ST-5X ST-5EX P (Gull-wing) ST-5TP ST-5ETP ST-5MP ST-5EMP ST-5P ST-5EP R (Gull-wing) ST-5TR ST-5ETR ST-5MR ST-5EMR ST-5R ST-5ER Pieces in package 500 pcs./reel 50 pcs./reel 50 pcs./reel FIG. 1: NOMINAL RESISTANCE VALUES 10 Ω∗ 20 Ω∗ 50 Ω 100 Ω 200 Ω 500 Ω 1 kΩ 2 kΩ 5 kΩ 10 kΩ 20 kΩ 50 kΩ 100 kΩ 200 kΩ 500 kΩ 1 MΩ 2 MΩ - The products indicated by * mark are manufactured upon receipt of order basis. * The above part numbers are all available with the respective combination of (Fig.1) * Verify the above part numbers when placing orders. * Taping specification is not sold seperately and must be purchased in reel units. Document Number: 58011 Revision: 06-Mar-06 For technical questions contact: copalsupport@vishay.com www.vishay.com 5 ST-5 Vishay Surface Mount Cermet Trimmers (14 turns) ORDERING INFORMATION ST-5 SERIES NAME TEMINAL PIN T W 204 FORM OF PACKAGING PRODUCT SHAPE (SHAPE OF TERMINAL) RESISTANCE CODE Blank: Sn-Pb T: Taping (Reel) W: Gull wing (Top adjustment) E: Sn (Lead(Pb)-free) M: Magazine (Stick) X: Gull wing (Side adjustment) Blank: Bulk in vinyl bags P: Gull wing (Side adjustment) R: Gull wing (Side adjustment) This product is manufactured by Copal Electronic Co. Ltd. of Tokyo, Japan and distributed by Vishay in North and South America only. This product is not available from Vishay outside of North or South America. Document Number: 58011 Revision: 06-Mar-06 For technical questions contact: copalsupport@vishay.com www.vishay.com 6 Legal Disclaimer Notice Vishay Notice Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. Document Number: 91000 Revision: 08-Apr-05 www.vishay.com 1