Upgrade for High Shock & Vibration Performance: STH; Plus Reverse Voltage Tolerance: T18
STE
www.vishay.com
Vishay
SuperTan® Wet Tantalum Capacitors With Hermetic Seal,
Extended Range
FEATURES
Vishay SuperTan® Extended (STE) represents a
major breakthrough in wet tantalum capacitor
Available
technology. Its unique cathode system, also used
in the ST, provides the highest capacitance per
Available
unit volume available. The STE combines the
inherent reliability of wet tantalum with the capacitance
stability of solid tantalum, and there are no circuit
impedance restrictions. The range is exceptionally well
suited for low voltage filtering and energy storage
applications. Ideal for designs targeting the military and
aerospace industry.
LINKS TO ADDITIONAL RESOURCES
The SuperTan® Extended (STE) is housed in an all tantalum,
hermetically sealed case and is manufactured to withstand
high stress and hazardous environments.
3D 3D
3D Models
• Axial through-hole terminations: standard tin / lead (Sn / Pb),
100 % tin (RoHS-compliant) available
PERFORMANCE CHARACTERISTICS
Operating Temperature: -55 °C to +85 °C
(to +125 °C with voltage derating)
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Capacitance Tolerance: at 120 Hz, +25 °C.
± 20 % standard. ± 10 % available as special.
Note
* This datasheet provides information about parts that are
RoHS-compliant and / or parts that are non RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information / tables in this datasheet for details
DC Leakage Current (DCL Max.): at +25 °C and above:
leakage current shall not exceed the values listed in the
Standard Ratings tables.
Life Test: capacitors are capable of withstanding a 2000 h
life test at a temperature of +85 °C at the applicable rated
DC working voltage.
ORDERING INFORMATION
STE
6000
16
T4
M
I (1)
E3 (2)
TYPE
CAPACITANCE
μF
DC VOLTAGE
RATING AT +85 °C
CASE
CODE
CAPACITANCE
TOLERANCE
INSULATING
SLEEVE
TERMINATION AND PACKAGING
M = ± 20 %
K = ± 10 %
I = insulated
X = uninsulated
E3 = 100 % tin termination
(RoHS-compliant)
Blank = SnPb termination
(standard design)
J = SMD, outside bend, tin / lead
K = SMD, outside bend, 100 % tin
L = SMD, inside bend, tin / lead
M = SMD, inside bend, 100 % tin
Notes
• Packaging: The use of formed plastic trays for packing bulk components is standard. Tape and reel cannot be used due to unit weight
(1) Sleeve on J, K, L, M terminations shall be Kapton only
(2) J, K, L, M are available in T4. For all other case sizes, check with marketing
Revision: 05-Jul-2022
Document Number: 43009
1
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Upgrade for High Shock & Vibration Performance: STH; Plus Reverse Voltage Tolerance: T18
STE
www.vishay.com
Vishay
AXIAL PRODUCT DIMENSIONS in inches [millimeters]
Terminal Welded
to Case
0.0253 ± 0.002 [0.64 ± 0.05] dia.
(no. 22 AWG) tinned nickel leads
solderable and weldable
0.250 (6.35)
Max.
0.094 (2.38)
Max.
L1
E
Terminal Location
within 0.031 of Center
“D” Dia.
E
CASE CODE
D ± 0.016 [0.41]
MAX. INSULATED
(DIA.)
L1 + 0.031 / - 0.016 [+ 0.79 / - 0.41]
UNINSULATED
E ± 0.250 [6.35] MAX.
T1
0.188 [4.78]
0.219 [5.56]
0.453 [11.51]
1.500 [38.10]
T2
0.281 [7.14]
0.312 [7.92]
0.641 [16.28]
2.250 [57.15]
T3
0.375 [9.52]
0.406 [10.31]
0.766 [19.46]
2.250 [57.15]
T4
0.375 [9.52]
0.406 [10.31]
1.062 [26.97]
2.250 [57.15]
Notes
• Material at egress is tantalum
• Insulation sleeving will lap over the ends of the capacitor case
• Approx. weight:
T1: 2.3 g, T2: 5.7 g
T3: 9.4 g, T4: 14.8 g
SMD PRODUCT DIMENSIONS in inches [millimeters]
Styles J, K
Styles L, M
Solder type
Term. code
100 % tin (RoHS-compliant)
J
K
SnPb
Solder type
Term. code
100 % tin (RoHS-compliant)
L
M
SnPb
L
L
L1
ØD
H2
H
H2
H
Tl x 2
Tw x 2
L1
ØD
Tl x 2
Tw x 2
A
CASE CODE
B
TYPE STE
ST
A
(max.)
B
(max.)
Tl
(max.)
H
(max.)
Tw ± 0.005
H2
(max.)
L
(max.)
L1
D
(max.)
D
T4
1.432
[36.4]
1.140
[29.0]
0.157
[4.0]
0.295
[7.5]
0.331
[8.4]
0.492
[12.5]
1.343
[34.1]
1.062 + 0.031 / - 0.016
[26.97 + 0.79 / - 0.41]
0.397
[10.1]
Revision: 05-Jul-2022
Document Number: 43009
2
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Upgrade for High Shock & Vibration Performance: STH; Plus Reverse Voltage Tolerance: T18
STE
www.vishay.com
Vishay
STANDARD RATINGS
CASE
CAPACITANCE
PART NUMBER (1)
VOLTAGE
CODE
(μF)
MAX. CAPACITANCE
MAX.
MAX.
TYP.
MAX. DCL AT
AC
CHANGE AT
ESR
IMP. AT RIPPLE
ESR
AT
AT
-55 °C
+25 °C
85 °C
+25 °C 1 kHz +25 °C +85 °C / -55 °C +85 °C +125 °C 120 Hz
40 kHz
+125 °C
120 Hz
(%)
(%)
(%)
(μA)
(Ω)
(Ω)
mA RMS
(μA)
(Ω)
10 VDC AT +85 °C; 7 VDC AT +125 °C
680
10
T1
Preliminary value, contact marketing
2000
10
T2
Preliminary value, contact marketing
4700
10
T3
STE4700-10T3MI
0.35
< 0.200
16
100
-80
10
20
3.50
4000
10 000
10
T4
STE10000-10T4MI
0.25
< 0.100
25
150
-85
20
35
3.00
5000
16 VDC AT +85 °C; 11 VDC AT +125 °C
430
16
T1
Preliminary value, contact marketing
1200
16
T2
Preliminary value, contact marketing
3300
16
T3
STE3300-16T3MI
0.35
< 0.200
16
100
-80
10
15
3.50
4000
6000
16
T4
STE6000-16T4MI
0.30
< 0.150
25
150
-80
15
20
3.00
4500
20
5.00
4250
20
20.00
1650
25
4.00
2750
20
16.00
2500
30
4.50
4000
25 VDC AT +85 °C; 15 VDC AT +125 °C
270
25
T1
Preliminary value, contact marketing
1000
25
T2
Preliminary value, contact marketing
2200
25
T3
Preliminary value, contact marketing
4000
25
T4
STE4000-25T4MI
0.35
< 0.150
25
125
-80
15
30 VDC AT +85 °C; 20 VDC AT +125 °C
220
30
T1
820
30
T2
1800
30
T3
3300
30
T4
180
35
T1
Preliminary value, contact marketing
STE820-30T2MI
1.00
< 0.600
3.5
18
-75
12
Preliminary value, contact marketing
STE3300-30T4MI
0.35
< 0.200
25
125
-80
20
35 VDC AT +85 °C; 22 VDC AT +125 °C
Preliminary value, contact marketing
680
35
T2
1500
35
T3
STE680-35T2MI
0.95
< 0.500
5
2800
35
T4
STE2800-35T4MI
110
50
T1
STE110-50T1MI
1.60
< 1.000
2
470
50
T2
STE470-50T2MI
0.90
< 0.600
5
520
50
T2
STE520-50T2MI
1.00
< 0.600
600
50
T2
STE600-50T2MI
1.00
< 0.600
750
50
T4
STE750-50T4MI
0.50
900
50
T3
STE900-50T3MI
0.90
950
50
T3
STE950-50T3MI
1000
50
T4
1200
50
T4
1500
50
1500
2200
25
-75
16
Preliminary value, contact marketing
0.35
< 0.200
25
125
-80
20
7.5
-40
10
15
40.00
1500
50
-60
8
12
12.00
2000
3
15
-80
12
18
20.00
1700
5
25
-80
12
18
20.00
1700
< 0.400
20
120
-35
10
15
6.50
3500
< 0.300
15
125
-75
20
20
10.00
2500
0.90
< 0.300
15
125
-75
20
20
10.00
2500
STE1000-50T4MI
0.50
< 0.300
20
120
-40
10
15
5.50
3500
STE1200-50T4MI
0.80
< 0.350
25
250
-75
25
35
8.00
2750
T3
STE1500-50T3MI
1.00
< 0.300
25
130
-85
25
30
8.00
2400
50
T4
STE1500-50T4MI
0.35
< 0.215
15
110
-70
20
20
6.00
3500
50
T4
STE2200-50T4MI
0.60
< 0.400
25
125
-80
25
30
4.50
3000
50 VDC AT +85 °C; 30 VDC AT +125 °C
Notes
(1) Part numbers shown are for units with ± 20 % capacitance tolerance and insulated capacitors.
For units with ± 10 % capacitance tolerance change the letter “M” to “K”.
For units without insulation, substitute “X” with “I” at the end of the part number.
For RoHS-compliant add the “E3” for suffix
(2) Requires export license for shipments outside the US. Contact marketing for availability
Revision: 05-Jul-2022
Document Number: 43009
3
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Upgrade for High Shock & Vibration Performance: STH; Plus Reverse Voltage Tolerance: T18
STE
www.vishay.com
Vishay
STANDARD RATINGS
CASE
CAPACITANCE
PART NUMBER (1)
VOLTAGE
CODE
(μF)
MAX. CAPACITANCE
MAX.
MAX.
TYP.
MAX. DCL AT
AC
CHANGE AT
ESR
IMP. AT RIPPLE
ESR
AT
AT
-55 °C
+25 °C
85 °C
+25 °C 1 kHz +25 °C +85 °C / -55 °C +85 °C +125 °C 120 Hz
40 kHz
+125 °C
120 Hz
(%)
(%)
(%)
(μA)
(Ω)
(Ω)
mA RMS
(μA)
(Ω)
60 VDC AT +85 °C; 40 VDC AT +125 °C
68
60
T1
STE68-60T1MI
1.50
< 0.600
1.5
7.5
-30
10
12
40.00
1400
220
60
T2
STE220-60T2MI
0.90
< 0.400
3
30
-45
10
15
16.00
2000
560
60
T3
STE560-60T3MI
0.90
< 0.300
20
120
-70
12
15
10.00
2500
750
60
T4
STE750-60T4MI
0.50
< 0.400
20
120
-35
10
15
6.50
3500
1000
60
T4
STE1000-60T4MI
0.50
< 0.300
20
120
-40
10
15
5.50
3500
1200
60
T4
STE1200-60T4MI
0.50
< 0.300
20
200
-70
15
20
6.00
3500
1800
60
T4 (2)
STE1800-60T4MI
0.50
< 0.300
25
250
-75
25
25
6.00
3000
75 VDC AT +85 °C; 50 VDC AT +125 °C
56
75
T1
STE56-75T1MI
1.60
< 0.800
1.5
7.5
-30
8
10
40.00
1750
180
75
T2
STE180-75T2MI
1.50
< 0.500
5
25
-35
15
20
30.00
2000
470
75
T3
STE470-75T3MI
0.60
< 0.325
25
100
-45
10
25
10.00
3000
750
75
T4
STE750-75T4MI
0.50
< 0.400
20
120
-35
10
15
6.50
3500
1200
75
T4 (2)
STE1200-75T4MI
0.80
< 0.350
25
250
-75
25
35
8.00
2750
22
100
T1
STE22-100T1MI
-15
4
10
100.00
1200
86
100
T2
220
100
T3
STE220-100T3MI
1.40
< 0.200
5
25
-55
10
15
18.00
2500
300
100
T4
STE300-100T4MI
0.70
< 0.400
10
120
-40
6
12
15.00
3000
400
100
T4
STE400-100T4MI
0.70
< 0.400
10
120
-40
6
12
15.00
3000
470
100
T4
STE470-100T4MI
0.70
< 0.450
25
250
-50
10
25
15.00
3000
100 VDC AT +85 °C; 65 VDC AT +125 °C
3.00
< 1.500
1
5
Preliminary value, contact marketing
125 VDC AT +85 °C; 85 VDC AT +125 °C
18
125
T1
56
125
T2
Preliminary value, contact marketing
Preliminary value, contact marketing
150
125
T3
Preliminary value, contact marketing
220
125
T4
STE220-125T4MI
0.80
< 0.600
15
150
-35
6
12
20.00
2500
240
125
T4
STE240-125T4MI
0.80
< 0.600
15
150
-35
6
12
20.00
2500
Notes
(1) Part numbers shown are for units with ± 20 % capacitance tolerance and insulated capacitors.
For units with ± 10 % capacitance tolerance change the letter “M” to “K”.
For units without insulation, substitute “X” with “I” at the end of the part number.
For RoHS-compliant add the “E3” for suffix
(2) Requires export license for shipments outside the US. Contact marketing for availability
Revision: 05-Jul-2022
Document Number: 43009
4
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Upgrade for High Shock & Vibration Performance: STH; Plus Reverse Voltage Tolerance: T18
STE
www.vishay.com
Vishay
TYPICAL PERFORMANCE CHARACTERISTICS OF STE CAPACITORS
ELECTRICAL CHARACTERISTICS
ITEM
PERFORMANCE CHARACTERISTICS
Operating temperature range
-55 °C to +85 °C (to +125 °C with voltage derating)
Capacitor tolerance
± 20 %, ± 10 % at 120 Hz, at +25 °C
Capacitor change by temperature
Limit per Standard Ratings table
ESR
Limit per Standard Ratings table, at +25 °C, 120 Hz
Impedance
Limit per Standard Ratings table, at -55 °C, 120 Hz
DCL (leakage current)
Limit per Standard Ratings table
AC ripple current
Limit per Standard Ratings table, at +85 °C and 40 kHz
Reverse voltage
There shall be no continuous reverse voltage. Transient reverse voltage surges are acceptable under
the following conditions:
a) The peak reverse voltage is equal to or less than 1.5 V and the product of the peak current times
the duration of the reverse transient is 0.05 As or less
b) The repetition rate of the reverse voltage surges is less than 10 Hz
Surge voltage
Surge voltage shall be in accordance with MIL-PRF-39006 and Table I of DLA 10004.
The DC rated surge voltage is the maximum voltage to which the capacitors can be subjected under
any conditions including transients and peak ripple at the highest line voltage.
The DC surge voltage is 115 % of rated DC voltage.
PERFORMANCE CHARACTERISTICS
ITEM
PERFORMANCE CHARACTERISTICS
Life testing
Capacitors shall be capable of withstanding a 2000 h life test at a temperature +85 °C at rated
voltage, or a 2000 h life test at 125 °C test at derated voltage.
After the test, the capacitors shall meet the following requirements:
a) DC leakage at 85 °C and 125 °C shall not exceed 125 % of the specified value
b) DC leakage at 25 °C shall not exceed the specified value
c) Capacitance shall be within +10 %, -20 % of initial value
d) ESR shall not exceed 200 % of the specified value
ENVIRONMENTAL CHARACTERISTICS
ITEM
CONDITION
COMMENTS
Seal
MIL-PRF-39006
When the capacitors are tested as specified in MIL-PRF-39006,
there shall be no evidence of leakage.
Moisture resistance
MIL-PRF-39006
Moisture resistance shall be in accordance with MIL-PRF-39006.
Number of cycles: 10 continuous cycles
Barometric pressure
(reduced)
MIL-STD-202, method 105, condition E
Altitude 150 000 feet
Revision: 05-Jul-2022
Document Number: 43009
5
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Upgrade for High Shock & Vibration Performance: STH; Plus Reverse Voltage Tolerance: T18
STE
www.vishay.com
Vishay
MECHANICAL CHARACTERISTICS
ITEM
CONDITION
COMMENTS
Shock (specified pulse)
MIL-STD-202, method 213, condition I
(100 g)
The capacitors shall meet the requirements of MIL-PRF-39006.
Vibration, high frequency
MIL-STD-202, method 204, condition D
(20 g peak)
The capacitors shall meet the requirements of MIL-PRF-39006.
Thermal shock
MIL-STD-202, method 107, condition A
Thermal shock shall be in accordance with MIL-PRF-39006 when
tested for 30 cycles.
Solderability
MIL-STD-202, method 208,
ANSI/J-STD-002, test A
Solderability shall be in accordance with MIL-PRF-39006.
Terminal strength
MIL-STD-202, method 211
Terminal strength shall be in accordance with MIL-PRF-39006.
Resistance to solder heat
MIL-STD-202, method 210, condition C
The capacitors shall meet the requirements of MIL-PRF-39006.
Terminals
MIL-STD-1276
Terminals shall be as specified in MIL-STD-1276. The length and
diameter of the terminals shall be as specified in Dimensions table.
All terminals shall be permanently secured internally and
externally, as applicable. All external joints shall be welded.
Marking
MIL-STD-1285
Marking of capacitors conforms to method I of MIL-STD-1285 and
include capacitance (in μF), capacitance tolerance letter, rated
voltage, date code, lot symbol and Vishay trademark.
SELECTOR GUIDES
Tantalum Selector Guide
www.vishay.com/doc?49054
Parameter Comparison Guide
www.vishay.com/doc?42088
Revision: 05-Jul-2022
Document Number: 43009
6
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jan-2022
1
Document Number: 91000
工商网监
湘ICP备2023018690号
