Bulletin PD-20583 rev. C 03/03
STPS1L30U
1 Amp
SCHOTTKY RECTIFIER
SMB
Description/ Features
Major Ratings and Characteristics
Characteristics
STPS1L30U Units
The STPS1L30U surface-mount Schottky rectifier has been
designed for applications requiring low forward drop and
small foot prints on PC boards. Typical applications are in disk
drives, switching power supplies, converters, free-wheeling
diodes, battery charging, and reverse battery protection.
IF(AV) Rectangular
waveform
1.0
A
VRRM
30
V
Small foot print, surface mountable
IFSM @ tp= 5 ms sine
360
A
Very low forward voltage drop
High frequency operation
VF
@ 1.0Apk, TJ= 125°C
0.30
V
Guard ring for enhanced ruggedness and long term
reliability
TJ
range
- 55 to 150
°C
Device Marking: IR13L
CATHODE
2.15 (.085)
1.80 (.071)
3.80 (.150)
3.30 (.130)
1
ANODE
2
1 POLARITY
4.70 (.185)
2 PART NUMBER
4.10 (.161)
2.5 TYP.
(.098 TYP.)
SOLDERING PAD
2.40 (.094)
1.90 (.075)
1.30 (.051)
0.76 (.030)
0.30 (.012)
0.15 (.006)
5.60 (.220)
5.00 (.197)
2.0 TYP.
(.079 TYP.)
4.2 (.165)
4.0 (.157)
Outline SMB
Dimensions in millimeters and (inches)
For recommended footprint and soldering techniques refer to application note #AN-994
www.irf.com
1
STPS1L30U
Bulletin PD-20583 rev. C 03/03
Voltage Ratings
Part number
VR
STPS1L30U
Max. DC Reverse Voltage (V)
30
VRWM Max. Working Peak Reverse Voltage (V)
Absolute Maximum Ratings
Parameters
Value
IF(AV) Max. Average Forward Current
Units Conditions
1.0
A
50% duty cycle @ TL = 106 °C, rectangular wave form
Max. Peak One Cycle Non-Repetitive
360
A
5µs Sine or 3µs Rect. pulse
Surge Current
75
EAS
Non- Repetitive Avalanche Energy
3.0
mJ
IAR
Repetitive Avalanche Current
1.0
A
Value
Units
0.420
V
@ 1A
0.470
V
@ 2A
0.300
V
@ 1A
0.375
V
@ 2A
IFSM
10ms Sine or 6ms Rect. pulse
Following any rated
load condition and
with rated VRRM applied
TJ = 25 °C, IAS = 1A, L = 6mH
Current decaying linearly to zero in 1 µsec
Frequency limited by TJ max. Va = 1.5 x Vr typical
Electrical Specifications
Parameters
VFM
IRM
Max. Forward Voltage Drop
(1)
Max. Reverse Leakage Current (1)
Conditions
TJ = 25 °C
TJ = 125 °C
0.2
mA
TJ =
5.0
mA
TJ = 100 °C
25 °C
15
mA
TJ = 125 °C
VR = rated VR
CT
Max. Junction Capacitance
200
pF
VR = 5VDC, (test signal range 100KHz to 1Mhz) 25°C
LS
Typical Series Inductance
2.0
nH
Measured lead to lead 5mm from package body
10000
V/µs
dv/dt Max. Voltage Rate of Change
(Rated VR)
(1) Pulse Width < 300µs, Duty Cycle < 2%
Thermal-Mechanical Specifications
Parameters
Value
TJ
Max. Junction Temperature Range (*) - 55 to 150
Tstg
Max. Storage Temperature Range
RthJL Max. Thermal Resistance
Junction to Lead
RthJA Max. Thermal Resistance
Junction to Ambient
wt
Approximate Weight
- 55 to 150
Units
Conditions
°C
°C
25
°C/W DC operation
80
°C/W DC operation
(**)
0.10 (0.003) g (oz.)
Case Style
SMB
Device Marking
IR13L
Similar to DO-214AA
(*) dPtot
1
<
thermal runaway condition for a diode on its own heatsink
dTj
Rth( j-a)
(**) Mounted 1 inch square PCB
2
www.irf.com
STPS1L30U
Bulletin PD-20583 rev. C 03/03
10
TJ = 125°C
1
100°C
75°C
0.1
50°C
0.01
25°C
0.001
0.0001
0
10
20
TJ = 125°C
Reverse Voltage - VR (V)
TJ = 25°C
Fig. 2 - Typical Peak Reverse Current
Vs. Reverse Voltage
1
30
1000
0.1
0
0.2
0.4
0.6
0.8
Forward Voltage Drop - VFM (V)
Fig. 1 - Maximum Forward Voltage Drop Characteristics
Junc tion Capa citance - C T (pF)
Instantaneous Forward Current - IF (A)
Reverse Current - IR (mA)
10
TJ = 25°C
100
10
0
10
20
30
Reverse Voltage - VR (V)
Fig. 3 - Typical Junction Capacitance
Vs. Reverse Voltage
www.irf.com
3
STPS1L30U
Bulletin PD-20583 rev. C 03/03
0.5
DC
Average Power Loss - (Watts)
Allowable Lead Temperature (°C)
130
120
D = 0.20
D = 0.25
D = 0.33
D = 0.50
D = 0.75
110
100
Square wave (D = 0.50)
80% Rated VR applied
D = 0.20
D = 0.25
D = 0.33
D = 0.50
D = 0.75
0.4
0.3
DC
RMSLimit
0.2
0.1
see note (2)
90
0
0
0.4
0.8
1.2
1.6
0
Average Forward Current - I F(AV) (A)
0.8
1.2
1.6
Fig. 5 - Maximum Average Forward Dissipation
Vs. Average Forward Current
Fig. 4 - Maximum Average Forward Current
Vs. Allowable Lead Temperature
Non-Repetitive Surge Current - I FSM (A)
0.4
Average Forward Current - I F(AV) (A)
1000
100
At Any Rated Load Condition
And With Rated Vrrm Applied
Following Surge
10
10
100
1000
10000
Square Wave Pulse Duration - t p (microsec)
Fig. 6 - Maximum Peak Surge Forward Current Vs. Pulse Duration
(2) Formula used: TC = TJ - (Pd + PdREV) x RthJC ;
Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 6);
PdREV = Inverse Power Loss = VR1 x IR (1 - D); IR @ VR1 = 80% rated VR
4
www.irf.com
STPS1L30U
Bulletin PD-20583 rev. C 03/03
Tape & Reel Information
Dimensions in millimetres and (inches)
Marking & Identification
Each device has 2 rows for identification. The first row
designates the device as manufactured by International
Rectifier as indicated by the letters "IR", and the Part
Number (indicates the current and the voltage rating).
The second row indicates the year, the week of
manufacturing and the Site ID.
Ordering Information
STPS1L30U - TAPE AND REEL
WHEN ORDERING, INDICATE
THE
PART
NUMBER AND THE QUANTITY ( IN MULTIPLES OF
3000 PIECES).
EXAMPLE:
STPS1L30U - 6000 PIECES
IR13L
VOLTAGE
CURRENT
IR LOGO
YYWWX
SITE ID
WEEK
YEAR
www.irf.com
5
STPS1L30U
Bulletin PD-20583 rev. C 03/03
Data and specifications subject to change without notice.
This product has been designed and qualified for Industrial Level.
Qualification Standards can be found on IR's Web site.
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105
TAC Fax: (310) 252-7309
Visit us at www.irf.com for sales contact information. 03/03
6
www.irf.com
很抱歉,暂时无法提供与“STPS1L30U”相匹配的价格&库存,您可以联系我们找货
免费人工找货