T34C397K060AZ6S

T34 www.vishay.com Vishay SuperTan® Wet Tantalum Capacitors With Hermetic Seal, Extended Range, Improved Vibration Capability, 200 °C Applications FEATURES • High capacitance, high performance (shock and vibration) Available • Hermetically sealed, tantalum case Available • +200 °C high temperature • Terminations: axial, standard tin / lead (SnPb) • 100 % tin (RoHS-compliant) available Available • Mounting: through-hole • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 LINKS TO ADDITIONAL RESOURCES 3D 3D PERFORMANCE CHARACTERISTICS Note * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details Operating Temperature: -55 °C to +85 °C (to +200 °C with voltage derating) APPLICATIONS 3D Models Capacitance Tolerance: at 120 Hz, +25 °C; ± 20 % standard; ± 10 % • Industrial DC Leakage Current (DCL Max.): at +25 °C and above: leakage current shall not exceed the values listed in the Standard Ratings tables. • High temperature / high stress environment • Petroleum exploration Life Test: capacitors are capable of withstanding life test at 200 °C at the applicable derated DC working voltage. ORDERING INFORMATION T34 C 107 M 125 B Z 6 S MODEL CASE CODE CAPACITANCE CAPACITANCE TOLERANCE DC VOLTAGE RATING AT + 85 °C TERMINATION AND PACKAGING RELIABILITY LEVEL CASE INSULATION ESR See Standard Ratings table This is expressed in picofarads. The first two digits are the significant figures. The third is the number of zeros to follow K = ± 10 % M = ± 20 % This is expressed in volts. To complete the three-digit block, zeros precede the voltage rating A = 100 % tin (RoHS compliant), bulk B = std., tin / lead, bulk Z = non-ER S = std. 8 = no outer case insulation L = low 6 = high temperature insulation film Note • Packaging: the use of formed plastic trays for packing bulk components is standard Revision: 29-Sep-2023 Document Number: 40228 1 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 T34 www.vishay.com Vishay DIMENSIONS in inches [millimeters] E L1 0.0253 ± 0.002 [0.64 ± 0.05] dia. (No. 22 AWG tinned nickel leads solderable and weldable) CASE CODE D E Weld Tantalum L2 D L1 (1) L2 (Max.) E WEIGHT (g) (Max.) T1 0.188 ± 0.016 [4.78 ± 0.41] 0.453 + 0.031 / - 0.016 [11.51 + 0.79 / - 0.41] 0.734 [18.64] 1.500 ± 0.250 [38.10 ± 6.35] 2.6 B T2 0.281 ± 0.016 [7.14 ± 0.41] 0.641 + 0.031 / - 0.016 [16.28 + 0.79 / - 0.41] 0.922 [23.42] 2.250 ± 0.250 [57.15 ± 6.35] 6.2 C T3 0.375 ± 0.016 [9.53 ± 0.41] 0.766 + 0.031 / - 0.016 [19.46 + 0.79 / - 0.41] 1.047 [26.59] 2.250 ± 0.250 [57.15 ± 6.35] 11.6 D T4 0.375 ± 0.016 [9.53 ± 0.41] 1.062 + 0.031 / - 0.016 [26.97 + 0.79 / - 0.41] 1.343 [34.11] 2.250 ± 0.250 [57.15 ± 6.35] 17.7 TYPE T34 CLR 79 / 81 EQUIV. A Note (1) For insulated parts, add 0.015 inches [0.38 mm] to the diameter. The insulation shall lap over the ends of the capacitor body RATINGS AND CASE CODES μF 50 V 60 V 75 V 100 V 10 A 15 A 33 A 47 68 A A A B A B 100 C 110 B 150 220 B B B B D 330 C 350 D 390 C 400 D C 560 680 D D D D 1000 Revision: 29-Sep-2023 D D 750 1500 D D 240 470 125 V D D D D Document Number: 40228 2 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 T34 www.vishay.com Vishay STANDARD RATINGS CAPACITANCE AT 25 °C 120 Hz (μF) VDC AT 200 °C CASE CODE PART NUMBER MAX. ESR 120 Hz (Ω) MAX. DCL (μA) 25 °C 85 °C / 125 °C LIFE TEST PERFORMANCE (h AT +200 °C) 50 VDC AT +85 °C 68 30 A T34A686(1)050(2)(3)(4)S 2.5 2 10 1000 220 30 B T34B227(1)050(2)(3)(4)S 0.9 4 20 1000 470 25 C T34C477(1)050(2)(3)(4)(S 0.75 3 25 2000 680 25 D T34D687(1)050(2)(3)(4)S 0.7 5 7 1000 1500 25 D T34D158(1)050(2)(3)(4)S 0.5 15 110 500 60 VDC AT +85 °C 47 36 A T34A476(1)060(2)(3)(4)S 2.0 2 10 1000 150 36 B T34B157(1)060(2)(3)(4)S 1.5 2 10 1000 390 30 C T34C397(1)060(2)(3)(4)S 0.9 3 25 1000 560 36 D T34D567(1)060(2)(3)(4)S 0.8 5 7 1000 1000 36 D T34D108(1)060(2)(3)(4)S 0.7 20 90 1000 2000 75 VDC AT +85 °C 33 45 A T34A336(1)075(2)(3)(4)S 2.5 2 10 68 45 A T34A686(1)075(2)(3)(4)S 3.0 2 10 500 110 45 B T34B117(1)075(2)(3)(4)S 1.3 2 10 1000 220 37 B T34B227(1)075(2)(3)(4)S 1.8 5 50 1000 330 45 C T34C337(1)075(2)(3)(4)S 1.0 3 25 1500 470 45 D T34D477(1)075(2)(3)(4)S 0.9 5 50 1000 750 45 D T34D757(1)075(2)(3)(4)S 0.7 25 150 500 1000 45 D T34D108(1)075(2)(3)(4)S 0.7 20 90 1000 15 60 A T34A156(1)100(2)(3)(4)S 3.5 1 5 1000 33 60 A T34A336(1)100(2)(3)(4)S 3.0 2 10 2000 68 60 B T34B686(1)100(2)(3)(4)S 2.1 2 10 1000 150 50 B T34B157(1)100(2)(3)(4)S 1.3 7.5 25 1000 220 60 D T34D227(1)100(2)(3)(4)S 1.2 5 50 1000 400 60 D T34D407(1)100(2)(3)(4)S 0.8 10 150 1500 470 60 D T34D477(1)100(2)(3)(4)S 0.7 15 150 1000 560 60 D T34D567(1)100(2)(3)(4)S 1.0 25 200 1000 750 50 D T34D757(1)100(2)(3)(4)S 0.7 25 150 500 5.5 1 5 1000 100 VDC AT +85 °C 125 VDC AT +85 °C 10 75 A T34A106(1)125(2)(3)(4)S 47 75 B T34B476(1)125(2)(3)(4)S 2.3 2 20 1000 100 75 C T34C107(1)125(2)(3)(4)S 1.8 3 35 1000 150 75 D T34D157(1)125(2)(3)(4)S 1.6 5 50 1000 240 75 D T34D247(1)125(2)(3)(4)S 1.0 10 50 1000 350 62 D T34D357(1)125(2)(3)(4)S 0.8 25 250 2000 Note • Part number definitions: (1) Capacitance tolerance: K, M (2) Termination and packaging: A = 100 % tin, bulk; B = std., tin / lead, bulk (3) Reliability level: Z = non-ER (4) Style number: 6 = high temperature film insulation, 8 = no film insulation Revision: 29-Sep-2023 Document Number: 40228 3 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 T34 www.vishay.com Vishay TYPICAL PERFORMANCE CHARACTERISTICS OF T34 CAPACITORS ELECTRICAL CHARACTERISTICS ITEM PERFORMANCE CHARACTERISTICS Operating temperature range -55 °C to +85 °C (to +200 °C with voltage derating) Capacitor tolerance ± 20 %, ± 10 % at 120 Hz, at +25 °C Capacitor change by temperature Limit per Standard Ratings table ESR Limit per Standard Ratings table, at +25 °C, 120 Hz DCL (leakage current) Limit per Standard Ratings table Reverse voltage There shall be no continuous reverse voltage. Transient reverse voltage surges are acceptable under the following conditions: a) The peak reverse voltage is equal to or less than 1.5 V and the product of the peak current times the duration of the reverse transient is 0.05 As or less b) The repetition rate of the reverse voltage surges is less than 10 Hz Surge voltage The DC rated surge voltage is the maximum voltage to which the capacitors can be subjected under any conditions including transients and peak ripple at the highest line voltage. The DC surge voltage is 115 % of rated DC voltage. RECOMMENDED VOLTAGE VS. TEMPERATURE DERATING 0.6 RV Derating 0.5 RV Derating 10000 120 100 1st line 2nd line 60 Temp. 25 °C 85 °C 125 °C 150 °C 175 °C 200 °C 40 20 RV 100 % 100 % 67 % 65 % 62 % 60 % 100 10 85 60 Temp. 25 °C 85 °C 125 °C 150 °C 175 °C 200 °C 40 20 0 25 1000 80 125 1st line 2nd line 1000 80 2nd line Rated Voltage (%) 100 2nd line Rated Voltage (%) 10000 120 RV 100 % 100 % 67 % 61 % 56 % 50 % 100 10 0 200 25 Temperature (°C) 85 125 200 Temperature (°C) PERFORMANCE CHARACTERISTICS ITEM PERFORMANCE CHARACTERISTICS Life testing Capacitors shall be capable of withstanding life test at temperature +200 °C at derated voltage. After the test, the capacitors shall meet the following requirements: a) Capacitance shall be within +10 %, -20 % of the initial value b) ESR shall not exceed 200 % of the applicable value from “Standard Ratings” table ENVIRONMENTAL CHARACTERISTICS ITEM CONDITION COMMENTS Seal MIL-STD-202, method 112, condition C When the capacitors are tested as specified there will be no evidence of leakage. Moisture resistance MIL-STD-202, method 106 10 continuous cycles, 6 VDC Barometric pressure (reduced) MIL-STD-202, method 105, condition E Altitude 150 000 feet Revision: 29-Sep-2023 Document Number: 40228 4 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 T34 www.vishay.com Vishay MECHANICAL CHARACTERISTICS ITEM CONDITION COMMENTS Shock (specified pulse) MIL-STD-202, method 213 Test condition D (500 g) Vibration, high frequency MIL-STD-202, method 204 Test condition H (80 g) Random vibration MIL-STD-202, method 214 Test condition II-K (53.8 g) Thermal shock MIL-STD-202, method 107 Test condition A, 30 cycles Solderability MIL-STD-202, method 208 ANSI / J-STD-002, test A Terminal strength MIL-STD-202, method 211 Condition A Resistance to solder heat MIL-STD-202, method 210 Condition C Terminals MIL-STD-1276 Terminals shall be as specified in MIL-STD-1276. The length and diameter of the terminals shall be as specified in Dimensions table. All terminals shall be permanently secured internally and externally, as applicable. All external joints shall be welded. Marking MIL-STD-1285 Marking of capacitors conforms to method I of MIL-STD-1285 and include capacitance (in μF), capacitance tolerance letter, rated voltage, date code, lot symbol and Vishay trademark. SELECTOR GUIDES Tantalum Selector Guide www.vishay.com/doc?49054 Parameter Comparison Guide www.vishay.com/doc?42088 Revision: 29-Sep-2023 Document Number: 40228 5 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2023 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2023 1 Document Number: 91000