T54EE476M035LZS070

T54 www.vishay.com Vishay vPolyTanTM Polymer Surface-Mount Chip Capacitors, Low ESR, Leadframeless Molded Type, Hi-Rel Commercial Off-The-Shelf (COTS) FEATURES • Ultra low ESR • High reliability processing including: - 100 % surge current tested Available Available - Accelerated voltage conditioning - Thermal shock Available - Statistical DC leakage screening at elevated temperature and voltage, covered by U.S. patent and worldwide patents pending. PATENT(S): www.vishay.com/patents/ LINKS TO ADDITIONAL RESOURCES 3D 3D 3D Models Models Calculators • High ripple current capability • Stable capacitance over operating temperature, voltage, and frequency range • No wear out effect PERFORMANCE / ELECTRICAL CHARACTERISTICS Operating Temperature: -55 °C to +125 °C (above 105 °C, additional voltage derating is required) Capacitance Range: 15 μF to 470 μF (discrete capacitors) 30 μF to 2800 μF (stacked capacitors) Capacitance Tolerance: ± 20 % Voltage Rating: 16 VDC to 75 VDC • Molded case 7343 EIA size and stacks The molding compound has been selected to meet the requirements of UL 94 V-0 and outgassing requirements of ASTM E-595 • Terminations: all cases (except EL): 3-sided wraparound Metallization areas on the left and right sides of the capacitor are not subject for inspection. EL-case: L-shape compatible with standard molded chip J-style termination • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 Note * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details APPLICATIONS • Decoupling, smoothing, filtering • Switch mode and point of load power supply • Infrastructure equipment • Storage and networking PATENT(S): www.vishay.com/patents This Vishay product is protected by one or more United States and international patents. Revision: 04-Sep-2023 Document Number: 40212 1 For technical questions, contact: polytech@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 T54 www.vishay.com Vishay ORDERING INFORMATION T54 EE TYPE 157 M CASE CAPACITANCE CAPACITANCE DC VOLTAGE CODE TOLERANCE RATING EE / EL, E2, E3, E4, E6, 3E, 6E See Ratings and Case Codes tables. This is expressed in picofarads. The first two digits are the significant figures. The third is the number of zeros to follow. E (1) Z A 075 TERMINATION / PACKAGING RELIABILITY LEVEL SURGE CURRENT LEVEL ESR 030 M = ± 20 % This is expressed in volts. To complete the three-digit block, zeros precede the voltage rating. A decimal point is indicated by an “R” (6R3 = 6.3 V) E = Sn / Pb solder / S = hi-rel std. 7” (178 mm) reel (40 h burn-in) L = Sn / Pb solder / Z = nonestablished 7” (178 mm), reliability ½ reel C = 100 % tin / 7” (178 mm) reel H = 100 % tin / 7” (178 mm), ½ reel B = 100 % tin / bulk in formed tray V = Sn / Pb solder, bulk in formed tray A = 10 cycles at Maximum +25 °C and DCL 100 kHz screening at elevated ESR temperature / voltage in mΩ B = 10 cycles at -55 °C / +85 °C and DCL screening at elevated temperature / voltage S = 6 cycles at +25 °C and DCL screening at elevated temperature / voltage D = 10 cycles at +25 °C E = 10 cycles at -55 °C / +85 °C F = 6 cycles at +25 °C Note (1) Tape and reel is available for discrete capacitors (T54EE / T54EL) only. Stacked capacitors (T54Ex) are shipped in formed trays. Contact factory for stack capacitors packing options T54EE: DISCRETE COMPONENT DIMENSIONS in inches [millimeters] Anode polarity mark Cathode termination Anode termination H W P1 CASE CODE EE P2 L P1 EIA SIZE H (MAX.) L W P1 P2 (REF.) 7343-43 0.169 [4.3] 0.287 ± 0.012 [7.3 ± 0.3] 0.169 ± 0.012 [4.3 ± 0.3] 0.051 ± 0.012 [1.3 ± 0.3] 0.191 [4.85] T54EL: DISCRETE COMPONENT DIMENSIONS in inches [millimeters] Anode termination Anode polarity mark A A Cathode termination B C W H D P1 P2 View A Both sides typical L P1 0.05 mm ref. 0.25 mm ref. C CASE CODE EIA SIZE H (MAX.) L W P1 P2 (REF.) C B (REF.) D (REF.) EL 7343-43 0.169 [4.3] 0.287 ± 0.012 [7.3 ± 0.3] 0.169 ± 0.012 [4.3 ± 0.3] 0.051 ± 0.008 [1.3 ± 0.2] 0.191 [4.85] 0.094 ± 0.008 [2.4 ± 0.2] 0.043 [1.10] 0.014 [0.35] Revision: 04-Sep-2023 Document Number: 40212 2 For technical questions, contact: polytech@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 T54 www.vishay.com Vishay T54E2: 2 COMPONENT STACK DIMENSIONS in millimeters [inches] Anode (+) End View L W H Side View P W2 CASE CODE L W H W2 P E2 8.0 ± 0.38 (0.315 ± 0.015) 4.4 ± 0.2 (0.174 ± 0.008) 8.9 ± 0.38 (0.352 ± 0.015) 3.0 ± 0.2 (0.120 ± 0.008) 1.9 ± 0.38 (0.075 ± 0.015) T54E3: 3 COMPONENT STACK DIMENSIONS in millimeters [inches] Anode (+) End View L W H Side View P W2 CASE CODE L W H W2 P E3 8.0 ± 0.38 (0.315 ± 0.015) 4.4 ± 0.2 (0.174 ± 0.008) 13.3 ± 0.38 (0.525 ± 0.015) 3.0 ± 0.2 (0.120 ± 0.008) 1.9 ± 0.38 (0.075 ± 0.015) Revision: 04-Sep-2023 Document Number: 40212 3 For technical questions, contact: polytech@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 T54 www.vishay.com Vishay T54E4: 4 COMPONENT STACK DIMENSIONS in millimeters [inches] Anode (+) End View L W H Side View W2 P CASE CODE L W H W2 P E4 8.0 ± 0.38 (0.315 ± 0.015) 8.9 ± 0.2 (0.350 ± 0.008) 8.9 ± 0.38 (0.352 ± 0.015) 7.4 ± 0.2 (0.292 ± 0.008) 1.9 ± 0.38 (0.075 ± 0.015) T54E6: 6 COMPONENT STACK DIMENSIONS in millimeters [inches] Anode (+) End View L W H Side View W2 P CASE CODE L W H W2 P E6 8.0 ± 0.38 (0.315 ± 0.015) 8.9 ± 0.2 (0.350 ± 0.008) 13.3 ± 0.38 (0.525 ± 0.015) 7.4 ± 0.2 (0.292 ± 0.008) 1.9 ± 0.38 (0.075 ± 0.015) Revision: 04-Sep-2023 Document Number: 40212 4 For technical questions, contact: polytech@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 T54 www.vishay.com Vishay T543E: 3 COMPONENT STACK DIMENSIONS in millimeters [inches] Anode (+) End View L W H Side View P W2 CASE CODE L W H W2 P 3E 8.0 ± 0.38 (0.315 ± 0.015) 13.6 ± 0.2 (0.535 ± 0.008) 4.8 ± 0.2 (0.189 ± 0.008) 12.0 ± 0.2 (0.472 ± 0.008) 1.9 ± 0.38 (0.075 ± 0.015) T546E: 6 COMPONENT STACK DIMENSIONS in millimeters [inches] Anode (+) End View L W H Side View P W2 CASE CODE L W H W2 P 6E 8.0 ± 0.38 (0.315 ± 0.015) 13.6 ± 0.2 (0.535 ± 0.008) 8.9 ± 0.38 (0.352 ± 0.015) 12.0 ± 0.2 (0.472 ± 0.008) 1.9 ± 0.38 (0.075 ± 0.015) T54EE / T54EL: RATINGS AND CASE CODES (ESR mΩ) μF 16 V 30 V 35 V 50 V 15 22 EE (100), EL (100) 47 EE (100, 70), EL (100, 70) EE (70), EL (70) EE (150, 75, 50), EL (150, 75, 50) 150 220 EE (25), EL (25) 330 EE (25), EL (25) 470 EE (25), EL (25) Revision: 04-Sep-2023 63 V 75 V EE (100), EL (100) EE (100), EL (100) EE (100), EL (100) EE (100), EL (100) EE (100, 50), EL (100, 50) Document Number: 40212 5 For technical questions, contact: polytech@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 T54 www.vishay.com T54Ex / T54xE μF (1): Vishay RATINGS AND CASE CODES (ESR mΩ) 16 V 30 V 35 V 50 V 63 V 30 E2 (50) E2 (50) 45 E2 (50) E2 (50); E3 / 3E (35) E2 (50); E3 / 3E (35) E4 (25) E4 (25) 60 75 V 66 E3 / 3E (35) E3 / 3E (35) E3 / 3E (35) 90 E4 (25) E4 (25); 6E / E6 (17) E4 (25); 6E / E6 (17) 6E / E6 (17) 6E / E6 (17) 95 E2 (35, 28) E2 (50) 130 E6 / 6E (17) 140 E3 / 3E (25, 18) E3 / 3E (35) 190 E4 (18, 14) E4 (25) 280 E6 / 6E (12, 10) E6 / 6E (17) 300 450 E2 (13) E2 (75, 38) E2 (25, 50) E3 / 3E (50, 25) E3 / 3E (17, 34) E4 (38, 20) E4 (13, 25) E6 / 6E (25, 13) E6 / 6E (9, 17) 600 660 E2 (13); E3 / 3E (9) 900 E4 (7) 940 E2 (13, 10) 990 E3 / 3E (9) 1300 E4 (7); E6 / 6E (5) 1400 E3 / 3E (9, 7) 1900 E4 (7, 5) 2000 E6 / 6E (5) 2800 E6 / 6E (5) Note (1) Contact marketing for availability of stacked capacitors MARKING +++ Family Capacitance T54 2 330 16V Anode polarity marks Vishay identification mark Voltage Note • Marking shows discrete capacitor rating Revision: 04-Sep-2023 Document Number: 40212 6 For technical questions, contact: polytech@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 T54 www.vishay.com Vishay T54EE / T54EL: DISCRETE COMPONENT STANDARD RATINGS CAPACITANCE CASE CODE (μF) MAX. DCL AT +25 °C (μA) PART NUMBER MAX. DF AT +25 °C 120 Hz (%) MAX. ESR AT +25 °C 100 kHz (mΩ) MAX. HI TEMPERATURE LOAD RIPPLE, 100 kHz TEMPERATURE TIME IRMS (°C) (h) (A) MSL 16 VDC AT +105 °C, 10 VDC AT 125 °C 220 EE T54EE227M016(1)(2)(3)025 352 10 25 4.195 125 2000 3 220 EL T54EL227M016(1)(2)(3)025 352 10 25 4.195 125 2000 3 330 EE T54EE337M016(1)(2)(3)025 528 10 25 4.195 125 2000 3 330 EL T54EL337M016(1)(2)(3)025 528 10 25 4.195 125 2000 3 470 EE T54EE477M016(1)(2)(3)025 752 10 25 4.195 125 2000 3 470 EL T54EL477M016(1)(2)(3)025 752 10 25 4.195 125 2000 3 150 EE T54EE157M030(1)(2)(3)150 450 10 150 1.713 125 2000 3 150 EL T54EL157M030(1)(2)(3)150 450 10 150 1.713 125 2000 3 150 EE T54EE157M030(1)(2)(3)075 450 10 75 2.422 125 2000 3 150 EL T54EL157M030(1)(2)(3)075 450 10 75 2.422 125 2000 3 150 EE T54EE157M030(1)(2)(3)050 450 10 50 3.114 125 2000 3 150 EL T54EL157M030(1)(2)(3)050 450 10 50 3.114 125 2000 3 30 VDC AT +105 °C, 20 VDC AT 125 °C 35 VDC AT +105 °C, 23 VDC AT 125 °C 47 EE T54EE476M035(1)(2)(3)070 165 10 70 2.507 125 2000 3 47 EL T54EL476M035(1)(2)(3)070 165 10 70 2.507 125 2000 3 150 EE T54EE157M035(1)S(3)100 525 10 100 2.098 125 1000 3 150 EL T54EL157M035(1)S(3)100 525 10 100 2.098 125 1000 3 150 EE T54EE157M035(1)S(3)050 525 10 50 2.966 125 1000 3 150 EL T54EL157M035(1)S(3)050 525 10 50 2.966 125 1000 3 22 EE T54EE226M050(1)(2)(3)100 110 10 100 2.098 125 2000 3 22 EL T54EL226M050(1)(2)(3)100 110 10 100 2.098 125 2000 3 47 EE T54EE476M050(1)(2)(3)100 235 10 100 2.098 125 2000 3 47 EL T54EL476M050(1)(2)(3)100 235 10 100 2.098 125 2000 3 47 EE T54EE476M050(1)(2)(3)070 235 10 70 2.507 125 2000 3 47 EL T54EL476M050(1)(2)(3)070 235 10 70 2.507 125 2000 3 50 VDC AT +105 °C, 33 VDC AT 125 °C 63 VDC AT +105 °C, 42 VDC AT 125 °C 15 EE T54EE156M063(1)(2)(3)100 95 10 100 2.098 125 2000 3 15 EL T54EL156M063(1)(2)(3)100 95 10 100 2.098 125 2000 3 22 EE T54EE226M063(1)(2)(3)100 139 10 100 2.098 125 2000 3 22 EL T54EL226M063(1)(2)(3)100 139 10 100 2.098 125 2000 3 15 EE T54EE156M075(1)(2)(3)100 113 10 100 2.098 125 1000 3 15 EL T54EL156M075(1)(2)(3)100 113 10 100 2.098 125 1000 3 22 EE T54EE226M075(1)(2)(3)100 165 12 100 2.098 125 2000 3 22 EL T54EL226M075(1)(2)(3)100 165 12 100 2.098 125 2000 3 75 VDC AT +105 °C, 50 VDC AT 125 °C Notes • Part number definitions: (1) Termination and packaging: E, L, C, H, B, V (2) Reliability level: Z, S (3) Surge current: A, B, S, D, E, F Revision: 04-Sep-2023 Document Number: 40212 7 For technical questions, contact: polytech@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 T54 www.vishay.com Vishay T54Ex / T54xE: COMPONENT STACK STANDARD RATINGS CAPACITANCE CASE CODE (μF) 450 660 660 660 900 940 940 990 990 1300 1300 1300 1400 1400 1400 1400 1900 1900 2000 2000 2800 2800 E2 E2 E3 3E E4 E2 E2 E3 3E E4 E6 6E E3 E3 3E 3E E4 E4 E6 6E E6 6E 300 300 450 450 450 450 600 600 900 900 900 900 E2 E2 E3 E3 3E 3E E4 E4 E6 E6 6E 6E 95 95 140 140 140 140 190 190 280 280 280 280 300 300 E2 E2 E3 E3 3E 3E E4 E4 E6 E6 6E 6E E2 E2 PART NUMBER MAX. DCL AT +25 °C (μA) MAX. DF AT +25 °C 120 Hz (%) (1) MAX. ESR AT +25 °C 100 kHz (mΩ) 16 VDC AT +105 °C, 10 VDC AT 125 °C T54E2457M016(1)S(2)013 704 10 13 T54E2667M016(1)S(2)013 1056 10 13 T54E3667M016(1)S(2)009 1056 10 9 T543E667M016(1)S(2)009 1056 10 9 T54E4907M016(1)S(2)007 1408 10 7 T54E2947M016(1)S(2)013 1504 10 13 T54E2947M016(1)S(2)010 1504 10 10 T54E3997M016(1)S(2)009 1584 10 9 T543E997M016(1)S(2)009 1584 10 9 T54E4138M016(1)S(2)007 2112 10 7 T54E6138M016(1)S(2)005 2112 10 5 T546E138M016(1)S(2)005 2112 10 5 T54E3148M016(1)S(2)009 2256 10 9 T54E3148M016(1)S(2)007 2256 10 7 T543E148M016(1)S(2)009 2256 10 9 T543E148M016(1)S(2)007 2256 10 7 T54E4198M016(1)S(2)007 3008 10 7 T54E4198M016(1)S(2)005 3008 10 5 T54E6208M016(1)S(2)005 3168 10 5 T546E208M016(1)S(2)005 3168 10 5 T54E6288M016(1)S(2)005 4512 10 5 T546E288M016(1)S(2)005 4512 10 5 30 VDC AT +105 °C, 20 VDC AT 125 °C T54E2307M030(1)S(2)075 900 10 75 T54E2307M030(1)S(2)038 900 10 38 T54E3457M030(1)S(2)050 1350 10 50 T54E3457M030(1)S(2)025 1350 10 25 T543E457M030(1)S(2)050 1350 10 50 T543E457M030(1)S(2)025 1350 10 25 T54E4607M030(1)S(2)038 1800 10 38 T54E4607M030(1)S(2)020 1800 10 20 T54E6907M030(1)S(2)025 2700 10 25 T54E6907M030(1)S(2)013 2700 10 13 T546E907M030(1)S(2)025 2700 10 25 T546E907M030(1)S(2)013 2700 10 13 35 VDC AT +105 °C, 25 VDC AT 125 °C T54E2956M035(1)S(2)035 330 10 35 T54E2956M035(1)S(2)028 330 10 28 T54E3147M035(1)S(2)025 495 10 25 T54E3147M035(1)S(2)018 495 10 18 T543E147M035(1)S(2)025 495 10 25 T543E147M035(1)S(2)018 495 10 18 T54E4197M035(1)S(2)018 660 10 18 T54E4197M035(1)S(2)014 660 10 14 T54E6287M035(1)S(2)012 990 10 12 T54E6287M035(1)S(2)010 990 10 10 T546E287M035(1)S(2)012 990 10 12 T546E287M035(1)S(2)010 990 10 10 T54E2307M035(1)S(2)050 1050 10 50 T54E2307M035(1)S(2)025 1050 10 25 MAX. HI TEMPERATURE LOAD RIPPLE, 100 kHz TEMPERATURE TIME IRMS (°C) (h) (A) MSL 6.794 6.794 8.165 8.165 9.258 6.794 7.746 8.165 8.165 9.258 10.954 10.954 8.165 9.258 8.165 9.258 9.258 10.954 10.954 10.954 10.954 10.954 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 2.828 3.974 3.464 4.899 3.464 4.899 3.974 5.477 4.899 6.794 4.899 6.794 125 125 125 125 125 125 125 125 125 125 125 125 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 3 3 3 3 3 3 3 3 3 3 3 3 4.140 4.629 4.899 5.774 4.899 5.774 5.774 6.547 7.071 7.746 7.071 7.746 3.464 4.899 125 125 125 125 125 125 125 125 125 125 125 125 125 125 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 1000 1000 3 3 3 3 3 3 3 3 3 3 3 3 3 3 Notes • Part number definitions: (1) Termination and packaging: B, V (2) Surge current: A, B, S, D, E, F (1) Contact marketing for availability of stacked capacitors Revision: 04-Sep-2023 Document Number: 40212 8 For technical questions, contact: polytech@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 T54 www.vishay.com Vishay T54Ex / T54xE: COMPONENT STACK STANDARD RATINGS CAPACITANCE CASE CODE (μF) 450 450 450 450 600 600 900 900 900 900 E3 E3 3E 3E E4 E4 E6 E6 6E 6E 45 66 66 95 90 130 130 140 140 190 280 280 E2 E3 3E E2 E4 E6 6E E3 3E E4 E6 6E 30 45 45 45 60 66 66 90 90 90 130 130 E2 E2 E3 3E E4 E3 3E E4 E6 6E E6 6E 30 45 45 45 60 66 66 90 90 90 130 130 E2 E2 E3 3E E4 E3 3E E4 E6 6E E6 6E PART NUMBER MAX. DCL AT +25 °C (μA) MAX. DF AT +25 °C 120 Hz (%) (1) MAX. ESR AT +25 °C 100 kHz (mΩ) 35 VDC AT +105 °C, 25 VDC AT 125 °C T54E3457M035(1)S(2)034 1575 10 34 T54E3457M035(1)S(2)017 1575 10 17 T543E457M035(1)S(2)034 1575 10 34 T543E457M035(1)S(2)017 1575 10 17 T54E4607M035(1)S(2)025 2100 10 25 T54E4607M035(1)S(2)013 2100 10 13 T54E6907M035(1)S(2)017 3150 10 17 T54E6907M035(1)S(2)009 3150 10 9 T546E907M035(1)S(2)017 3150 10 17 T546E907M035(1)S(2)009 3150 10 9 50 VDC AT +105 °C, 33 VDC AT 125 °C T54E2456M050(1)S(2)050 220 10 50 T54E3666M050(1)S(2)035 330 10 35 T543E666M050(1)S(2)035 330 10 35 T54E2956M050(1)S(2)050 470 10 50 T54E4906M050(1)S(2)025 440 10 25 T54E6137M050(1)S(2)017 660 10 17 T546E137M050(1)S(2)017 660 10 17 T54E3147M050(1)S(2)035 705 10 35 T543E147M050(1)S(2)035 705 10 35 T54E4197M050(1)S(2)025 940 10 25 T54E6287M050(1)S(2)017 1410 10 17 T546E287M050(1)S(2)017 1410 10 17 63 VDC AT +105 °C, 43 VDC AT 125 °C T54E2306M063(1)S(2)050 190 10 50 T54E2456M063(1)S(2)050 278 10 50 T54E3456M063(1)S(2)035 285 10 35 T543E456M063(1)S(2)035 285 10 35 T54E4606M063(1)S(2)025 380 10 25 T54E3666M063(1)S(2)035 417 10 35 T543E666M063(1)S(2)035 417 10 35 T54E4906M063(1)S(2)025 556 10 25 T54E6906M063(1)S(2)017 570 10 17 T546E906M063(1)S(2)017 570 10 17 T54E6137M063(1)S(2)017 834 10 17 T546E137M063(1)S(2)017 834 10 17 75 VDC AT +105 °C, 50 VDC AT 125 °C T54E2306M075(1)S(2)050 226 10 50 T54E2456M075(1)S(2)050 330 12 50 T54E3456M075(1)S(2)035 339 10 35 T543E456M075(1)S(2)035 339 10 35 T54E4606M075(1)S(2)025 452 10 25 T54E3666M075(1)S(2)035 495 12 35 T543E666M075(1)S(2)035 495 12 35 T54E4906M075(1)S(2)025 660 12 25 T54E6906M075(1)S(2)017 678 10 17 T546E906M075(1)S(2)017 678 10 17 T54E6137M075(1)S(2)017 990 12 17 T546E137M075(1)S(2)017 990 12 17 MAX. HI TEMPERATURE LOAD RIPPLE, 100 kHz TEMPERATURE TIME IRMS (°C) (h) (A) MSL 4.201 5.941 4.201 5.941 4.899 6.794 5.941 8.165 5.941 8.165 125 125 125 125 125 125 125 125 125 125 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 3 3 3 3 3 3 3 3 3 3 3.464 4.140 4.140 3.464 4.899 5.941 5.941 4.140 4.140 4.899 5.941 5.941 125 125 125 125 125 125 125 125 125 125 125 125 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 3 3 3 3 3 3 3 3 3 3 3 3 3.464 3.464 4.140 4.140 4.899 4.140 4.140 4.899 5.941 5.941 5.941 5.941 125 125 125 125 125 125 125 125 125 125 125 125 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 3 3 3 3 3 3 3 3 3 3 3 3 3.464 3.464 4.140 4.140 4.899 4.140 4.140 4.899 5.941 5.941 5.941 5.941 125 125 125 125 125 125 125 125 125 125 125 125 1000 2000 1000 1000 1000 2000 2000 2000 1000 1000 2000 2000 3 3 3 3 3 3 3 3 3 3 3 3 Notes • Part number definitions: (1) Termination and packaging: B, V (2) Surge current: A, B, S, D, E, F (1) Contact marketing for availability of stacked capacitors Revision: 04-Sep-2023 Document Number: 40212 9 For technical questions, contact: polytech@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 T54 www.vishay.com Vishay RECOMMENDED VOLTAGE DERATING GUIDELINES CAPACITOR VOLTAGE RATING AT -55 °C TO +105 °C CAPACITOR CATEGORY VOLTAGE AT +105 °C TO +125 °C RECOMMENDED VOLTAGE DERATING AT -55 °C TO +105 °C RECOMMENDED VOLTAGE DERATING AT +105 °C TO +125 °C 16 10 12.8 8.6 30 20 24 16.2 35 23 28 18.4 50 33 40 26.4 63 42 50 34 75 50 60 40.5 RATED AND RECOMMENDED DERATED VOLTAGES VS. TEMPERATURE Axis Title 100 10000 Rated voltage 95 85 1000 80 1st line 2nd line 2nd line Rated Voltage (%) 90 Recommended application voltage 75 70 100 67 % 65 60 55 54 % 10 50 -55 25 55 85 105 125 Temperature (°C) CAPACITANCE VS. FREQUENCY T54E6137M075xxx017 1000 10 100 1 100 1K 10K 100K Frequency (Hz) Revision: 04-Sep-2023 1M 10 10M 1000 10000 100 1000 10 100 1st line 2nd line 100 2nd line Capacitance (μF) 10000 1st line 2nd line 2nd line Capacitance (μF) T54EE337M016xxx025 1000 1 100 1K 10K 100K 1M 10 10M Frequency (Hz) Document Number: 40212 10 For technical questions, contact: polytech@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 T54 www.vishay.com Vishay IMPEDANCE AND ESR VS. FREQUENCY T54EE337M016xxx025 T54E6137M075xxx017 10 000 1000 100 100 10 ESR 1 100 1K 10K 100K 1M Z 1000 1000 1st line 2nd line 2nd line Impedance / ESR (mΩ) Z 1000 10000 100 000 10000 1st line 2nd line 2nd line Impedance / ESR (mΩ) 10 000 100 100 ESR 10 1 10 10M 100 1K 10K 100K 1M 10 10M Frequency (Hz) Frequency (Hz) POWER DISSIPATION CASE CODE MAXIMUM PERMISSIBLE POWER DISSIPATION AT +45 °C (W) WITH +30 °C RISE IN FREE AIR EE, EL 0.44 E2, E3, E4, E6, 3E, 6E 0.60 STANDARD PACKAGING QUANTITY CASE CODE EE, EL QUANTITY (PCS/PACKAGING UNIT) 7" REEL ½ REEL 400 200 Note • Contact factory for stack capacitors packing and board mounting options PERFORMANCE CHARACTERISTICS (for Discrete Capacitors T54EE / T54EL) ITEM CONDITION POST TEST PERFORMANCE Life test at +105 °C 2000 h application of rated voltage at 105 °C, MIL-STD-202 method 108 Capacitance change Within ± 20 % of initial value Dissipation factor Within initial limits Leakage current Shall not exceed 300 % of initial limit Capacitance change Within ± 20 % of initial value Dissipation factor Within initial limits Leakage current Shall not exceed 300 % of initial limit Capacitance change Within ± 20 % of initial value Dissipation factor Within initial limits Life test at +125 °C 2000 h application of 2/3 rated voltage at 125 °C, MIL-STD-202 method 108 Shelf life test at +105 °C 2000 h no voltage applied at 105 °C, MIL-STD-202 method 108 Humidity tests At 60 °C / 90 % RH 500 h, no voltage applied Revision: 04-Sep-2023 Leakage current Shall not exceed 300 % of initial limit Capacitance change -20 % to +40 % of initial value Dissipation factor Within initial limit Leakage current Shall not exceed 300 % of initial limit Document Number: 40212 11 For technical questions, contact: polytech@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 T54 www.vishay.com Vishay PERFORMANCE CHARACTERISTICS (for Discrete Capacitors T54EE / T54EL) ITEM CONDITION Stability at low and high temperatures -55 °C 25 °C 85 °C 105 °C Surge voltage 105 °C, 1000 successive test cycles at 1.3 of rated voltage in series with a 33 Ω resistor at the rate of 30 s ON, 30 s OFF POST TEST PERFORMANCE Capacitance change Within -20 % to 0 % of initial value Dissipation factor Shall not exceed 150 % of initial limit Leakage current n/a Capacitance change Within ± 20 % of initial value Dissipation factor Within initial limit Leakage current Within initial limit Capacitance change Within -0 % to +50 % of initial value Dissipation factor Within initial limit Leakage current Shall not exceed 1000 % of initial value Capacitance change Within -0 % to +50 % of initial value Dissipation factor Within initial limit Leakage current Shall not exceed 1000 % of initial limit Capacitance change Within ± 20 % of initial value Dissipation factor Within initial limit Leakage current Shall not exceed 300 % of initial limit PERFORMANCE CHARACTERISTICS (for Discrete Capacitors T54EE / T54EL and Component Stacks) ITEM CONDITION POST TEST PERFORMANCE Shock (specified pulse) MIL-STD-202, method 213, condition E, 1000 g peak Capacitance change Within ± 20 % of initial value Dissipation factor Within initial limit Leakage current Shall not exceed 300 % of initial limit Capacitance change Within ± 20 % of initial value Dissipation factor Within initial limit Leakage current Shall not exceed 300 % of initial limit Vibration MIL-STD-202, method 204, condition D, 10 Hz to 2000 Hz 20 g peak There shall be no mechanical or visual damage to capacitors post-conditioning. Shear test Apply a pressure load of 17.7 N for 10 s ± 1 s horizontally to the center of capacitor side body Capacitance change Within ± 20 % of initial value Dissipation factor Within initial limit Leakage current Shall not exceed 300 % of initial limit PRODUCT INFORMATION Polymer Guide www.vishay.com/doc?40076 Moisture Sensitivity www.vishay.com/doc?40135 Infographic www.vishay.com/doc?48084 Sample Board www.vishay.com/doc?48073 FAQ Frequently Asked Questions Revision: 04-Sep-2023 www.vishay.com/doc?42106 Document Number: 40212 12 For technical questions, contact: polytech@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Polymer Guide www.vishay.com Vishay Guide for Tantalum Solid Electrolyte Chip Capacitors With Polymer Cathode INTRODUCTION Tantalum electrolytic capacitors are the preferred choice in applications where volumetric efficiency, stable electrical parameters, high reliability, and long service life are primary considerations. The stability and resistance to elevated temperatures of the tantalum/tantalum oxide/manganese dioxide system make solid tantalum capacitors an appropriate choice for today's surface mount assembly technology. Vishay Sprague has been a pioneer and leader in this field, producing a large variety of tantalum capacitor types for consumer, industrial, automotive, military, and aerospace electronic applications. Tantalum is not found in its pure state. Rather, it is commonly found in a number of oxide minerals, often in combination with Columbium ore. This combination is known as “tantalite” when its contents are more than one-half tantalum. Important sources of tantalite include Australia, Brazil, Canada, China, and several African countries. Synthetic tantalite concentrates produced from tin slags in Thailand, Malaysia, and Brazil are also a significant raw material for tantalum production. Electronic applications, and particularly capacitors, consume the largest share of world tantalum production. Other important applications for tantalum include cutting tools (tantalum carbide), high temperature super alloys, chemical processing equipment, medical implants, and military ordnance. Vishay Sprague is a major user of tantalum materials in the form of powder and wire for capacitor elements and rod and sheet for high temperature vacuum processing. THE BASICS OF TANTALUM CAPACITORS Most metals form crystalline oxides which are non-protecting, such as rust on iron or black oxide on copper. A few metals form dense, stable, tightly adhering, electrically insulating oxides. These are the so-called “valve”metals and include titanium, zirconium, niobium, tantalum, hafnium, and aluminum. Only a few of these permit the accurate control of oxide thickness by electrochemical means. Of these, the most valuable for the electronics industry are aluminum and tantalum. Capacitors are basic to all kinds of electrical equipment, from radios and television sets to missile controls and automobile ignitions. Their function is to store an electrical charge for later use. Capacitors consist of two conducting surfaces, usually metal plates, whose function is to conduct electricity. They are separated by an insulating material or dielectric. The dielectric used in all tantalum electrolytic capacitors is tantalum pentoxide. Tantalum pentoxide compound possesses high-dielectric strength and a high-dielectric constant. As capacitors are being manufactured, a film of tantalum pentoxide is applied to their electrodes by means of an electrolytic process. The film is applied in various thicknesses and at various voltages and although transparent to begin with, it takes on different colors as light refracts through it. This coloring occurs on the tantalum electrodes of all types of tantalum capacitors. Revision: 08-Sep-2022 Rating for rating, tantalum capacitors tend to have as much as three times better capacitance/volume efficiency than aluminum electrolytic capacitors. An approximation of the capacitance/volume efficiency of other types of capacitors may be inferred from the following table, which shows the dielectric constant ranges of the various materials used in each type. Note that tantalum pentoxide has a dielectric constant of 26, some three times greater than that of aluminum oxide. This, in addition to the fact that extremely thin films can be deposited during the electrolytic process mentioned earlier, makes the tantalum capacitor extremely efficient with respect to the number of microfarads available per unit volume. The capacitance of any capacitor is determined by the surface area of the two conducting plates, the distance between the plates, and the dielectric constant of the insulating material between the plates. COMPARISON OF CAPACITOR DIELECTRIC CONSTANTS DIELECTRIC Air or vacuum Paper Plastic Mineral oil Silicone oil Quartz Glass Porcelain Mica Aluminum oxide Tantalum pentoxide Ceramic e DIELECTRIC CONSTANT 1.0 2.0 to 6.0 2.1 to 6.0 2.2 to 2.3 2.7 to 2.8 3.8 to 4.4 4.8 to 8.0 5.1 to 5.9 5.4 to 8.7 8.4 26 12 to 400K In the tantalum electrolytic capacitor, the distance between the plates is very small since it is only the thickness of the tantalum pentoxide film. As the dielectric constant of the tantalum pentoxide is high, the capacitance of a tantalum capacitor is high if the area of the plates is large: C = eA ------t where C = capacitance e = dielectric constant A = surface area of the dielectric t = thickness of the dielectric Tantalum capacitors contain either liquid or solid electrolytes. In solid electrolyte capacitors, a dry material (manganese dioxide) forms the cathode plate. A tantalum lead is embedded in or welded to the pellet, which is in turn connected to a termination or lead wire. The drawings show the construction details of the surface mount types of tantalum capacitors shown in this catalog. Document Number: 40076 1 For technical questions, contact: polytech@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Polymer Guide www.vishay.com Vishay SOLID ELECTROLYTE POLYMER TANTALUM CAPACITORS Solid electrolyte polymer capacitors utilize sintered tantalum pellets as anodes. Tantalum pentoxide dielectric layer is formed on the entire surface of anode, which is further impregnated with highly conductive polymer as cathode system. The conductive polymer layer is then coated with graphite, followed by a layer of metallic silver, which provides a conductive surface between the capacitor element and the outer termination (lead frame or other). Molded chip polymer tantalum capacitor encases the element in plastic resins, such as epoxy materials. The molding compound has been selected to meet the requirements of UL 94 V-0 and outgassing requirements of ASTM E-595. After assembly, the capacitors are tested and inspected to assure long life and reliability. It offers excellent reliability and high stability for variety of applications in electronic devices. Usage of conductive polymer cathode system provides very low equivalent series resistance (ESR), which makes the capacitors particularly suitable for high frequency applications. TANTALUM CAPACITOR WITH POLYMER CATHODE TYPE T50 / T51 / T55 / T56 Epoxy encapsulation Silver adhesive Anode polarity bar Solderable cathode termination Polymer / carbon / silver coating Solderable anode termination Sintered tantalum pellet Lead frame welded to Ta wire TANTALUM CAPACITOR WITH POLYMER CATHODE TYPE T58 Rating / marking Encapsulation Side cathode termination (-) Anode polarity bar Silver adhesive epoxy Bottom cathode termination (-) Copper pad Side anode termination (+) Glass reinforced epoxy resin substrate Polymer / carbon / silver coating Conductive strip Sintered tantalum pellet Anode wire Revision: 08-Sep-2022 Bottom anode termination (+) Document Number: 40076 2 For technical questions, contact: polytech@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Polymer Guide www.vishay.com Vishay TANTALUM CAPACITOR WITH POLYMER CATHODE TYPE T52 T52 E5 case Encapsulation Side cathode termination (-) Polarity bar marking Silver adhesive epoxy Bottom cathode termination (-) Silver plated copper substrate Side anode termination (+) Sintered tantalum pellet Conductive strip Polymer / carbon / silver coating Bottom anode termination (+) T52 M1 case Encapsulation Polarity bar marking Side cathode termination (-) Silver adhesive epoxy Bottom cathode termination (-) Silver plated copper substrate Side anode termination (+) Sintered tantalum pellet Polymer / carbon / silver coating Bottom anode termination (+) TANTALUM CAPACITOR WITH POLYMER CATHODE TYPE T54 / T59 / 20021 Top / bottom cathode termination (-) Encapsulation Anode polarity marking Side cathode termination (-) Silver plated copper substrate Top / bottom anode termination (+) Silver adhesive epoxy Conductive strip Sintered tantalum pellet Side anode termination (+) Top / bottom cathode termination (-) Polymer / carbon / silver coating Top / bottom anode termination (+) Revision: 08-Sep-2022 Document Number: 40076 3 For technical questions, contact: polytech@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Polymer Guide www.vishay.com Vishay HERMETICALLY SEALED TANTALUM CAPACITOR WITH POLYMER CATHODE TYPE T27 Kapton sleeve Metal case Anode polarity marking Metal cover Cathode termination (-) Insulator Sintered tantalum pellet Polymer / carbon coating Silver coating Silver epoxy adhesive Anode wire Anode termination (+) Bushing [optional] Glass insulator POLYMER CAPACITORS - METAL CASE, HERMETICALLY SEALED SERIES T27 PRODUCT IMAGE TYPE FEATURES VPolyTanTM hermetically sealed polymer surface-mount chip capacitors, low ESR Hermetically sealed in metal case, low ESR / low DCL, hi-rel. processing TEMPERATURE RANGE -55 °C to +125 °C CAPACITANCE RANGE 15 μF to 470 μF VOLTAGE RANGE 16 V to 75 V CAPACITANCE TOLERANCE ± 20 % LEAKAGE CURRENT 0.05 CV DISSIPATION FACTOR ESR CASE SIZES TERMINATION FINISH Revision: 08-Sep-2022 12 % 25 mΩ to 100 mΩ D 100 % tin; tin / lead Document Number: 40076 4 For technical questions, contact: polytech@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Polymer Guide www.vishay.com Vishay POLYMER CAPACITORS - MOLDED CASE SERIES T50, T51, T55, T56 PRODUCT IMAGE VPolyTanTM, molded case, high performance polymer High performance -55 °C to +105 °C / +125 °C 3.3 μF to 1000 μF 2.5 V to 63 V ± 20 % 0.1 CV 8 % to 10 % 6 mΩ to 500 mΩ J, P, A, T, B, Z, V, D, C Cases J, P, C: 100 % tin Case A, T, B, Z, V, D: Ni / Pd / Au TYPE FEATURES TEMPERATURE RANGE CAPACITANCE RANGE VOLTAGE RANGE CAPACITANCE TOLERANCE LEAKAGE CURRENT DISSIPATION FACTOR ESR CASE SIZES TERMINATION FINISH POLYMER CAPACITORS - LEADFRAMELESS MOLDED CASE SERIES T52 T58 T59 T54 20021 vPolyTanTM polymer surface mount chip capacitors, low profile, leadframeless molded type vPolyTanTM polymer surface mount chip capacitors, compact, leadframeless molded type vPolyTanTM polymer surface mount chip capacitors, low ESR, leadframeless molded type Low profile Small case size Multianode TEMPERATURE RANGE -55 °C to +105 °C -55 °C to +105 °C -55 °C to +105 °C -55 °C to +125 °C -55 °C to +125 °C CAPACITANCE RANGE 47 μF to 1500 μF 1 μF to 330 μF 15 μF to 470 μF 15 μF to 470 μF (discrete capacitors) 30 μF to 2800 μF (stacked capacitors) 15 μF to 470 μF 10 V to 35 V 6.3 V to 35 V 16 V to 75 V 16 V to 75 V 16 V to 63 V ± 20 % ± 20 % ± 10 %, ± 20 % ± 20 % ± 20 % PRODUCT IMAGE TYPE FEATURES VOLTAGE RANGE CAPACITANCE TOLERANCE LEAKAGE CURRENT DISSIPATION FACTOR ESR CASE SIZES TERMINATION Revision: 08-Sep-2022 vPolyTanTM polymer surface mount chip capacitors, low ESR, leadframeless molded type, hi-rel commercial off-the-shelf (COTS) Hi-rel COTS, multianode vPolyTanTM polymer surface mount chip capacitors, low ESR, leadframeless molded type, DLA approved Multianode 0.1 CV 10 % 8 % to 14 % 25 mΩ to 55 mΩ 50 mΩ to 500 mΩ E5, M1, M9, B2 MM, W0, W9, A0, BB 100 % tin 12 % 12 % 25 mΩ to 150 mΩ 5 mΩ to 150 mΩ EE EE, E2, E3, E4, E6 100 % tin; tin / lead 10 % 25 mΩ to 150 mΩ EE Tin / lead Document Number: 40076 5 For technical questions, contact: polytech@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Polymer Guide www.vishay.com Vishay MOLDED CAPACITORS, T50 / T51 / T55 / T56 TYPES PLASTIC TAPE AND REEL PACKAGING DIMENSIONS in millimeters E A B C Label D W TAPE WIDTH A+0/-3 B+1/0 C ± 0.2 D ± 0.5 E ± 0.5 W ± 0.3 8 12 Ø 180 Ø 60 Ø 13 Ø 21 2.0 9.0 13.0 Note • A reel diameter of 330 mm is also applicable PLASTIC TAPE SIZE DIMENSIONS in millimeters Pocket Perforation E Ø 1.5 + 0.10 W B F A P1 t Direction of tape flow 4.0 ± 0.1 2.0 ± 0.1 Inserting direction Perforation Marking side (upper) Mounting terminal side (lower) Symbol: R CASE CODE J P A T B C Z V D A ± 0.2 1.0 1.4 1.9 3.1 3.1 3.7 4.8 4.8 4.8 B ± 0.2 1.8 2.2 3.5 3.8 3.8 6.3 7.7 7.7 7.7 W ± 0.3 8.0 8.0 8.0 8.0 8.0 12.0 12.0 12.0 12.0 F ± 0.1 3.5 3.5 3.5 3.5 3.5 5.5 5.5 5.5 5.5 E ± 0.1 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.75 P1 ± 0.1 4.0 4.0 4.0 4.0 4.0 8.0 8.0 8.0 8.0 tmax. 1.3 1.6 2.5 1.7 2.5 3.1 2.6 2.6 3.4 Note • A reel diameter of 330 mm is also applicable Revision: 08-Sep-2022 Document Number: 40076 6 For technical questions, contact: polytech@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Polymer Guide www.vishay.com Vishay LEADFRAMELESS MOLDED CAPACITORS, ALL TYPES PLASTIC TAPE AND REEL PACKAGING in inches [millimeters] 0.157 ± 0.004 [4.0 ± 0.10] Tape thickness Deformation between embossments 0.014 [0.35] max. 0.059 + 0.004 - 0.0 [1.5 + 0.10 - 0.0] Top cover tape A0 K0 B1 (max.) (6) 10 pitches cumulative tolerance on tape ± 0.008 [0.200] Embossment 0.079 ± 0.002 0.069 ± 0.004 [2.0 ± 0.05] [1.75 ± 0.10] 0.030 [0.75] min. (3) B0 0.030 [0.75] min. (4) Top cover tape For tape feeder 0.004 [0.10] max. reference only including draft. Concentric around B0 (5) F W 20° Maximum component rotation (Side or front sectional view) Center lines of cavity P1 D1 (min.) for components (5) . 0.079 x 0.047 [2.0 x 1.2] and larger USER DIRECTION OF FEED Maximum cavity size (1) Cathode (-) Anode (+) DIRECTION OF FEED 20° maximum component rotation Typical component cavity center line B0 A0 (Top view) Typical component center line 3.937 [100.0] 0.039 [1.0] max. Tape 0.039 [1.0] max. 0.9843 [250.0] Camber (Top view) Allowable camber to be 0.039/3.937 [1/100] Non-cumulative over 9.843 [250.0] Tape and Reel Specifications: all case sizes are available on plastic embossed tape per EIA-481. Standard reel diameter is 7" [178 mm]. Notes • Metric dimensions will govern. Dimensions in inches are rounded and for reference only (1) A , B , K , are determined by the maximum dimensions to the ends of the terminals extending from the component body and / or the body 0 0 0 dimensions of the component. The clearance between the ends of the terminals or body of the component to the sides and depth of the cavity (A0, B0, K0) must be within 0.002" (0.05 mm) minimum and 0.020" (0.50 mm) maximum. The clearance allowed must also prevent rotation of the component within the cavity of not more than 20° (2) Tape with components shall pass around radius “R” without damage. The minimum trailer length may require additional length to provide “R” minimum for 12 mm embossed tape for reels with hub diameters approaching N minimum (3) This dimension is the flat area from the edge of the sprocket hole to either outward deformation of the carrier tape between the embossed cavities or to the edge of the cavity whichever is less (4) This dimension is the flat area from the edge of the carrier tape opposite the sprocket holes to either the outward deformation of the carrier tape between the embossed cavity or to the edge of the cavity whichever is less (5) The embossed hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment location shall be applied independent of each other (6) B dimension is a reference dimension tape feeder clearance only 1 Revision: 08-Sep-2022 Document Number: 40076 7 For technical questions, contact: polytech@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Polymer Guide www.vishay.com Vishay CARRIER TAPE DIMENSIONS in inches [millimeters] CASE CODE TAPE SIZE B1 (MAX.) (1) D1 (MIN.) F K0 (MAX.) P1 P2 0.315 ± 0.004 0.079 ± 0.002 [8.0 ± 0.10] [2.00 ± 0.05] W E5 12 mm 0.329 [8.35] 0.059 [1.5] 0.217 ± 0.002 [5.50 ± 0.05] 0.071 [1.8] MM (2) 8 mm 0.075 [1.91] 0.02 [0.5] 0.138 [3.5] 0.043 [1.10] M1, M9 12 mm 0.32 [8.2] 0.059 [1.5] W9 8 mm 0.126 [3.20] 0.030 [0.75] 0.138 [3.5] 0.045 [1.15] 0.157 [4.0] 0.079 ± 0.002 [2.00 ± 0.05] 0.315 [8.0] W0 8 mm 0.126 [3.20] 0.030 [0.75] 0.138 [3.5] 0.045 [1.15] 0.157 [4.0] 0.079 ± 0.002 [2.00 ± 0.05] 0.315 [8.0] A0 8 mm - 0.02 [0.5] 0.138 [3.5] 0.049 [1.25] 0.157 [4.0] 0.079 ± 0.002 [2.00 ± 0.05] 0.315 [8.0] BB 8 mm 0.157 [4.0] 0.039 [1.0] 0.138 [3.5] 0.087 [2.22] 0.157 [4.0] 0.079 ± 0.002 [2.00 ± 0.05] 0.315 [8.0] EE 12 mm 0.32 [8.2] 0.059 [1.5] B2 8 mm 0.157 [4.0] 0.039 [1.0] D (3) 16 mm 0.321 [8.16] 0.059 [1.5] 0.157 [4.0] 0.315 ± 0.04 [8.0 ± 1.0] 0.217 ± 0.002 0.094 [2.39] [5.5 ± 0.05] 0.217 ± 0.002 0.175 [4.44] [5.5 ± 0.05] 0.138 [3.5] 0.315 ± 0.04 [8.0 ±1.0] 0.057 [1.45] 0.157 [4.0] 0.476 ± 0.008 [12.1 ± 0.20] 0.079 ± 0.002 [2.00 ± 0.05] 0.315 [8.0] 0.079 ± 0.002 0.472 + 0.012 / - 0.004 [2.00 ± 0.05] [12.0 + 0.3 / - 0.10] 0.079 ± 0.002 0.472 + 0.012 / - 0.004 [2.00 ± 0.05] [12.0 + 0.3 / - 0.10] 0.079 ± 0.002 [2.00 ± 0.05] 0.295 ± 0.004 0.472 ± 0.004 0.079 ± 0.004 0.308 [7.83] [12.00 ± 0.1] [2.00 ± 0.1] [7.50 ± 0.1] 0.315 [8.0] 0.630 ± 0.012 [16.00 ± 0.3] Notes (1) For reference only (2) Standard packaging of MM case is with paper tape. Plastic tape is available per request (3) Tape thickness 0.018 [0.45] max. PAPER TAPE AND REEL PACKAGING DIMENSIONS in inches [millimeters] T Ø D0 P2 P0 [10 pitches cumulative tolerance on tape ± 0.2 mm] E1 A0 Bottom cover tape F W B0 E2 Top cover tape P1 Cavity center lines Anode Cavity size (1) Bottom cover tape G USER FEED DIRECTION CASE TAPE SIZE SIZE A0 B0 D0 P0 P1 P2 E F W T MM 8 mm 0.041 ± 0.002 0.071 ± 0.002 0.06 ± 0.004 0.157 ± 0.004 0.157 ± 0.004 0.079 ± 0.002 0.069 ± 0.004 0.0138 ± 0.002 0.315 ± 0.008 0.037 ± 0.002 [1.05 ± 0.05] [1.8 ± 0.05] [1.5 ± 0.1] [4.0 ± 0.1] [4.0 ± 0.1] [2.0 ± 0.05] [1.75 ± 0.1] [3.5 ± 0.05] [8.0 ± 0.2] [0.95 ± 0.05] M0 8 mm 0.049 ± 0.002 0.081 ± 0.002 0.06 ± 0.004 0.157 ± 0.004 0.157 ± 0.004 0.079 ± 0.002 0.069 ± 0.004 0.0138 ± 0.002 0.315 ± 0.008 0.041 ± 0.002 [1.25 ± 0.05] [2.05 ± 0.05] [1.5 ± 0.1] [4.0 ± 0.1] [4.0 ± 0.1] [2.0 ± 0.05] [1.75 ± 0.1] [3.5 ± 0.05] [8.0 ± 0.2] [1.05 ± 0.05] Note (1) A , B are determined by the maximum dimensions to the ends of the terminals extending from the component body and / or the body 0 0 dimensions of the component. The clearance between the ends of the terminals or body of the component to the sides and depth of the cavity (A0, B0) must be within 0.002" (0.05 mm) minimum and 0.020" (0.50 mm) maximum. The clearance allowed must also prevent rotation of the component within the cavity of not more than 20° Revision: 08-Sep-2022 Document Number: 40076 8 For technical questions, contact: polytech@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Polymer Guide www.vishay.com Vishay PACKING AND STORAGE Polymer capacitors meet moisture sensitivity level rating (MSL) of 3 or 4 as specified in IPC/JEDEC® J-STD-020 and are dry packaged in moisture barrier bags (MBB) per J-STD-033. MSL for each particular family is defined in the datasheet - either in “Features” section or “Standard Ratings” table. Level 3 specifies a floor life (out of bag) of 168 hours and level 4 specifies a floor life of 72 hours at 30 °C maximum and 60 % relative humidity (RH). Unused capacitors should be re-sealed in the MBB with fresh desiccant. A moisture strip (humidity indicator card) is included in the bag to assure dryness. To remove excess moisture, capacitors can be dried at 40 °C (standard “dry box” conditions). For detailed recommendations please refer to J-STD-033. RECOMMENDED REFLOW PROFILES Vishay recommends no more than 3 cycles of reflow in accordance with J-STD-020. TP tp Max. ramp up rate = 3 °C/s Max. ramp down rate = 6 °C/s TL Temperature TSmax. tL Preheat area TSmin. tS 25 Time 25 °C to peak Time PROFILE FEATURE PREHEAT AND SOAK Temperature min. (TSmin.) Temperature max. (TSmax.) Time (tS) from (TSmin. to TSmax.) RAMP UP Ramp-up rate (TL to Tp) Liquidus temperature (TL) Time (tL) maintained above TL Peak package body temperature (Tp) max. Time (tp) within 5 °C of the peak max. temperature RAMP DOWN Ramp-down rate (Tp to TL) Time from 25 °C to peak temperature SnPb EUTECTIC ASSEMBLY LEAD (Pb)-FREE ASSEMBLY 100 °C 150 °C 60 s to 120 s 150 °C 200 °C 60 s to 120 s 3 °C/s maximum 183 °C 217 °C 60 s to 150 s Depends on type and case - see table below 20 s 5 s (1) 6 °C/s maximum 6 min maximum 8 min maximum Note (1) For T27, lead (Pb)-free capacitors t = 30 s p PEAK PACKAGE BODY TEMPERATURE (Tp) MAXIMUM TYPE CASE CODE T27 T55 T52 T58 T50 T51 T56 T59 T54 20021 D J, P, A, T, B, C, Z, V, D E5, M1, M9, B2 MM, W9, W0, A0, BB D D, V B, D, V EE 3E, 6E, EE, E2, E3, E4, E6 EE PEAK PACKAGE BODY TEMPERATURE (TP) MAX. SnPb EUTECTIC ASSEMBLY LEAD (Pb)-FREE ASSEMBLY 220 °C 245 °C 260 °C 260 °C 260 °C n/a 260 °C 260 °C 250 °C 220 °C 250 °C 220 °C 250 °C 220 °C n/a Notes • T50, T51, T52, T55, T56, and T58 capacitors are process sensitive. PSL classification to JEDEC J-STD-075: R4G • T54 and T59 capacitors with 100 % tin termination are process sensitive. PSL classification to JEDEC J-STD-075: R6G Revision: 08-Sep-2022 Document Number: 40076 9 For technical questions, contact: polytech@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Polymer Guide www.vishay.com Vishay MOLDED CAPACITORS, T50 / T51 / T55 / T56 TYPES PAD DIMENSIONS in millimeters L Capacitor Pattern Y CASE / DIMENSIONS J P A T/B C Z/V/D CAPACITOR SIZE L W 1.6 0.8 2.0 1.25 3.2 1.6 3.5 2.8 5.8 3.2 7.3 4.3 X W G Z G (max.) 0.7 0.5 1.1 1.4 2.9 4.1 PAD DIMENSIONS Z (min.) X (min.) 2.5 1.0 2.6 1.2 3.8 1.5 4.1 2.7 6.9 2.7 8.2 2.9 Y (Ref.) 0.9 1.05 1.35 1.35 2.0 2.05 LEADFRAMELESS MOLDED CAPACITORS T52 / T58 PAD DIMENSIONS in inches [millimeters] D B C Pads A Capacitor body FAMILY T52 T58 CASE CODE E5 M1, M9 B2 MM W0, W9 A0 BB A (NOM.) 0.094 [2.40] 0.178 [4.52] 0.081 [2.06] 0.024 [0.61] 0.035 [0.89] 0.047 [1.19] 0.094 [2.39] B (MIN.) 0.077 [1.95] 0.098 [2.48] 0.057 [1.44] 0.027 [0.70] 0.029 [0.74] 0.042 [1.06] 0.044 [1.11] C (NOM.) 0.180 [4.57] 0.138 [3.50] 0.070 [1.77] 0.025 [0.64] 0.041 [1.05] 0.065 [1.65] 0.072 [1.82] D (MIN.) 0.333 [8.46] 0.333 [8.46] 0.183 [4.64] 0.080 [2.03] 0.099 [2.52] 0.148 [3.76] 0.159 [4.03] LEADFRAMELESS MOLDED CAPACITORS T59 / T54 / 20021 PAD DIMENSIONS in inches [millimeters] B D C Pads A Capacitor body FAMILY T59 / T54 T54 20021 Revision: 08-Sep-2022 CASE CODE EE E2 / E3 E4 / E6 3E 6E EE A (NOM.) 0.209 [5.30] 0.128 [3.24] 0.301 [7.64] 0.482 [12.24] 0.482 [12.24] 0.209 [5.30] B (MIN.) 0.098 [2.50] 0.120 [3.04] 0.120 [3.04] 0.120 [3.04] 0.120 [3.04] 0.098 [2.50] C (NOM.) 0.169 [4.30] 0.154 [3.92] 0.154 [3.92] 0.154 [3.92] 0.154 [3.92] 0.169 [4.30] D (MIN.) 0.366 [9.30] 0.394 [10.0] 0.394 [10.0] 0.394 [10.0] 0.394 [10.0] 0.366 [9.30] Document Number: 40076 10 For technical questions, contact: polytech@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Polymer Guide www.vishay.com Vishay HERMETICALLY SEALED CAPACITOR T27 TYPE PAD DIMENSIONS in inches [millimeters] D C B A CASE CODE A (MIN.) B (NOM.) C (NOM.) D (NOM.) D 0.295 [7.50] 0.138 [3.50] 0.100 [2.50] 0.374 [9.50] GUIDE TO APPLICATION 1. AC Ripple Current: the maximum allowable ripple current shall be determined from the formula: I R MS = 3. P -----------R ESR where, P= power dissipation in W at +45 °C as given in the tables in the product datasheets. 2. MAXIMUM RIPPLE CURRENT TEMPERATURE DERATING FACTOR RESR = the capacitor equivalent series resistance at the specified frequency. ≤ 45 °C 1.0 55 °C 0.8 AC Ripple Voltage: the maximum allowable ripple voltage shall be determined from the formula: 85 °C 0.6 P V R MS = Z -----------R ESR or, from the formula: Mounting Precautions: 5.1 Soldering: capacitors can be attached by conventional soldering techniques; vapor phase, convection reflow, infrared reflow, wave soldering, and hot plate methods. The soldering profile charts show recommended time / temperature conditions for soldering. Preheating is recommended. The recommended maximum ramp rate is 3 °C per second. Attachment with a soldering iron is not recommended due to the difficulty of controlling temperature and time at temperature. The soldering iron must never come in contact with the capacitor. For details see www.vishay.com/doc?40214. The capacitor impedance at the specified frequency. Voltage Ripple voltage Rated voltage Operating voltage Working voltage 0.25 5. RESR = The capacitor equivalent series resistance at the specified frequency. The tantalum capacitors must be used in such a condition that the sum of the working voltage and ripple voltage peak values does not exceed the rated voltage as shown in figure below. 0.4 125 °C Reverse Voltage: the capacitors are not intended for use with reverse voltage applied. However, they are capable of withstanding momentary reverse voltage peaks, which must not exceed the following values: At 25 °C: 10 % of the rated voltage or 1 V, whichever is smaller. At 85 °C: 5 % of the rated voltage or 0.5 V, whichever is smaller. At 105 °C: 3 % of the rated voltage or 0.3 V, whichever is smaller. where, P= power dissipation in W at +45 °C as given in the tables in the product datasheets. Z= 105 °C 4. V RMS = I RM S x Z 2.1 Temperature Derating: power dissipation is affected by the heat sinking capability of the mounting surface. If these capacitors are to be operated at temperatures above +45 °C, the permissible ripple current (or voltage) shall be calculated using the derating coefficient as shown in the table below: Time (s) Revision: 08-Sep-2022 Document Number: 40076 11 For technical questions, contact: polytech@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Polymer Guide www.vishay.com 5.2 Vishay Limit Pressure on Capacitor Installation with Mounter: pressure must not exceed 4.9 N with a tool end diameter of 1.5 mm when applied to the capacitors using an absorber, centering tweezers, or similar (maximum permitted pressurization time: 5 s). An excessively low absorber setting position would result in not only the application of undue force to the capacitors but capacitor and other component scattering, circuit board wiring breakage, and / or cracking as well, particularly when the capacitors are mounted together with other chips having a height of 1 mm or less. 5.3 Flux Selection 5.3.1 Select a flux that contains a minimum of chlorine and amine. 5.3.2 After flux use, the chlorine and amine in the flux remain must be removed. 5.4 Cleaning After Mounting: the following solvents are usable when cleaning the capacitors after mounting. Never use a highly active solvent. • Halogen organic solvent (HCFC225, etc.) • Alcoholic solvent (IPA, ethanol, etc.) • Petroleum solvent, alkali saponifying agent, water, etc. Circuit board cleaning must be conducted at a temperature of not higher than 50 °C and for an immersion time of not longer than 30 minutes. When an ultrasonic cleaning method is used, cleaning must be conducted at a frequency of 48 kHz or lower, at an vibrator output of 0.02 W/cm3, at a temperature of not higher than 40 °C, and for a time of 5 minutes or shorter. Notes • Care must be exercised in cleaning process so that the mounted capacitor will not come into contact with any cleaned object or the like or will not get rubbed by a stiff brush or similar. If such precautions are not taken particularly when the ultrasonic cleaning method is employed, terminal breakage may occur • When performing ultrasonic cleaning under conditions other than stated above, conduct adequate advance checkout Revision: 08-Sep-2022 Document Number: 40076 12 For technical questions, contact: polytech@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2023 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2023 1 Document Number: 91000