T63XB103KT20

厂商：
TFUNK(威世)
封装：
插件
描述：
可调电阻/电位器 10KΩ ±10% 250mW 插件 ±100ppm/℃

数据手册：

下载T63XB103KT20.pdf

立即购买

详情介绍
数据手册
价格&库存

T63XB103KT20 数据手册

T63 www.vishay.com Vishay Sfernice 1/4" Multi-Turn Fully Sealed Container Cermet Trimmer FEATURES • 0.25 W at 70 °C • Industrial grade • Tests according to CECC 41000 or IEC 60393-1 • Multi-turn operation • Low contact resistance variation < 2 % Due to their square shape and small size (6.8 mm x 6.8 mm x 5 mm), the multi-turn trimmers of the T63 series are ideally suited for PCB use, enabling high density board mounting with reduced space requirement between cards. • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 Six versions are available differing by the top or side position of the adjustment screw and by PC pins configuration. The use of cermet for the resistive track ensures an excellent stability of nominal specifications throughout life. DIMENSIONS in millimeters (± 0.5 mm) Terminal Spacing on a 2.54 PCB T63XA 6.8 ± 0.2 4 min. Ø 0.45 2.54 2.54 Screwdriver slot 0.5 x 0.5 2.3 ± 0.2 5 max. a b c 0.25 6.8 ± 0.2 0.7 Ø 1.8 a b c 1 ± 0.1 5.7 ± 0.1 T63XB 6.8 ± 0.2 4 min. 1.2 ± 0.3 5 max. 2.54 2.54 a b c 0.25 6.8 ± 0.2 2.54 Screwdriver slot 0.5 x 0.5 0.7 Ø 1.8 a b c 1 ± 0.1 5.7 ± 0.1 T63YA 7.8 max. Ø 0.45 5 max. 6.8 ± 0.2 4 min. 1 ± 0.1 2.54 a b c 0.25 Ø 1.8 6.8 ± 0.2 2.54 2.3 ± 0.2 T63YB 1.2 ± 0.3 6.8 ± 0.2 4 min. 2.54 2.54 5 max. 1 ± 0.1 a b c 0.25 Ø 1.8 6.8 ± 0.2 2.54 T63ZA 1.3 ± 0.1 a b c 1.3 ± 0.1 a b c 6.8 ± 0.2 c b a 6.8 ± 0.2 Ø 1.8 c b a 2.54 2.54 1.3 ± 0.1 3.7 1 ± 0.1 T63ZB 6.8 ± 0.2 c b a 6.8 ± 0.2 Ø 1.8 2.54 2.54 5 max. 4 min. c b a 2.54 3.7 Revision: 09-Sep-16 Document Number: 51024 1 For technical questions, contact: sferpottrimmers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 T63 www.vishay.com Vishay Sfernice ELECTRICAL SPECIFICATIONS Resistive element Cermet Electrical travel 14 turns ± 2 10  to 2.2 M Resistance range Standard series and on request series E3 Tolerance 1 - 2 - 5 (1 - 2.2 - 4.7) Standard ± 10 % On request ±5% Linear 0.25 W at 70 °C Power rating POWER IN W 0.25 0 0 25 70 50 125 100 155 AMBIENT TEMPERATURE IN °C Circuit diagram Temperature coefficient Limiting element voltage (linear law) Contact resistance variation End resistance (typical) a c (1) (3) cw b (2) See Standard Resistance Element table 250 V 2 % Rn or 2  1 Dielectric strength (RMS) 1000 V Insulation resistance (500 VDC) 106 M MECHANICAL SPECIFICATIONS Mechanical travel Operating torque (max. Ncm) End stop torque 15 turns ± 5 1.5 Clutch action Unit weight (max. g) 0.5 Wiper (actual travel) Positioned at approx. 50 % Terminals Pure Sn (code e3) ENVIRONMENTAL SPECIFICATIONS Temperature range Climatic category Sealing Revision: 09-Sep-16 -55 °C to +155 °C 55/125/56 Fully sealed - IP67 Document Number: 51024 2 For technical questions, contact: sferpottrimmers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 T63 www.vishay.com Vishay Sfernice PERFORMANCES TESTS CONDITIONS TYPICAL VALUES AND DRIFTS RT/RT R1-2/R1-2 OTHER Electrical endurance 1000 h at rated power 90'/30' - ambient temperature 70 °C ±1% ±2% Contact res. variation: < 1 % Rn Climatic sequence Phase A dry heat 125 °C - 30 % Pr Phase B damp heat Phase C cold -55 °C Phase D damp heat 5 cycles ± 0.5 % ±1% - 56 days 40 °C, 93 % RH ± 0.5 % ±1% Dielectric strength: 1000 VRMS Insulation resistance: > 104 M 5 cycles -55 °C to +125 °C ± 0.5 % - V1-2/V1-3  ± 1 % 50 g at 11 ms 3 successive shocks in 3 directions ± 0.1 % ± 0.2 % - 10 Hz to 55 Hz 0.75 mm or 10 g during 6 h ± 0.1 % - V1-2/V1-3  ± 0.2 % - Contact res. variation: < 1 % Rn Damp heat, steady state Rapid temperature change Shock Vibration Mechanical endurance 200 cycles ± (2 % + 3 ) Note • Nothing stated herein shall be construed as a guarantee of quality or durability. STANDARD RESISTANCE ELEMENT DATA STANDARD RESISTANCE VALUES LINEAR LAW MAX. MAX. POWER WORKING AT 70 °C VOLTAGE MAX. WIPER CURRENT TYPICAL TCR -55 °C +125 °C ppm/°C  W V mA 10 0.25 1.58 158 20 0.25 2.23 112 50 0.25 3.5 77 100 0.25 35 50 200 0.25 7.07 35 500 0.25 11.2 22 1K 0.25 15.8 15.8 2K 0.25 22.3 11.2 5K 0.25 35.3 7.1 10K 0.25 50 5 20K 0.25 70.7 3.5 25K 0.25 79 3.2 50K 0.25 112 2.2 100K 0.25 158 1.6 200K 0.25 224 1.1 250K 0.25 250 1.1 500K 0.13 250 0.5 1M 0.06 250 0.25 2.2M 0.03 250 0.125 Revision: 09-Sep-16 MARKING • • • • • • • Vishay trademark Model Style Ohmic value (in , k, M) Tolerance (in %) only if non standard Manufacturing date Marking of terminal 3 PACKAGING • In tube of 50 pieces code T20 (TU50) ± 100 Document Number: 51024 3 For technical questions, contact: sferpottrimmers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 T63 www.vishay.com Vishay Sfernice ORDERING INFORMATION (part number) T 6 3 X A 1 0 4 K T 2 0 MODEL STYLE OHMIC VALUE TOLERANCE PACKAGING T63 XA XB YA YB ZA ZB From 10  to 2.2 M 104 = 100 k K = 10 % on request J = 5 % T20 = tube 50 pieces SPECIAL NUMBER (If applicable) Given by Vishay for custom design DESCRIPTION (for information only) T63 XA 100K 10 % MODEL STYLE VALUE TOLERANCE SPECIAL TU e3 PACKAGING LEAD (Pb)-FREE RELATED DOCUMENTS APPLICATION NOTES Potentiometers and Trimmers www.vishay.com/doc?51001 Guidelines for Vishay Sfernice Resistive and Inductive Components www.vishay.com/doc?52029 Revision: 09-Sep-16 Document Number: 51024 4 For technical questions, contact: sferpottrimmers@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000

下载 PDF

T63XB103KT20

物料型号：Vishay Sfernice T63系列

器件简介： - 尺寸为6.8 mm x 6.8 mm x 5 mm，有六种版本，根据调节螺钉的位置和PC引脚配置不同。 - 使用瓷介质材料，确保了电阻轨迹的稳定性。

引脚分配： - 提供了详细的尺寸表，包括端子间距和不同型号的T63系列的尺寸规格。

参数特性： - 功率等级：0.25 W at 70 °C - 工业级 - 测试标准：CECC 41000或IEC 60393-1 - 多圈操作 - 低接触电阻变化：<2%

功能详解： - 电阻范围：标准系列和按需系列E3，公差从±10%到±5% - 电路图提供了电位器的连接方式。

应用信息： - 环境规格包括温度范围-55°C至+155°C，气候类别55/125/56，以及完全密封-IP67。

封装信息： - 通常以50件一管的形式包装，代码为T20(TU50)。

性能测试： - 包括电气耐久性、气候顺序、稳态湿热、快速温度变化、冲击、振动和机械耐久性等测试。

订购信息： - 提供了详细的订购信息，包括型号、风格、欧姆值、公差、包装和特殊编号。

相关文档： - 提供了有关电位器和微调器的应用说明和Vishay Sfernice电阻和电感元件的指导方针的链接。