T86E226M035EBAS

T86 www.vishay.com Vishay Sprague Solid Tantalum Surface Mount TANTAMOUNT®, Molded Case, Hi-Rel COTS, Low ESR, Built-In-Fuse FEATURES • Terminations: 100 % matte tin, standard, tin/lead available • Molded case available in three case sizes • Compatible with “High Volume” automatic pick and place equipment • High ripple current carrying capability • Meets EIA 535BAAC case sizes • Weibull grading and surge current test options per MIL-PRF-55365 • Standard and low ESR options • Compliant to RoHS Directive 2002/95/EC • Moisture sensitivity level 1 Note * Pb containing terminations are not RoHS compliant, exemptions may apply PERFORMANCE CHARACTERISTICS www.vishay.com/doc?40088 Capacitance Range: 0.47 μF to 470 μF Capacitance Tolerance: ± 10 %, ± 20 % Voltage Rating: 4 VDC to 50 VDC Operating Temperature: - 55 °C to + 125 °C (Above 85 °C voltage derating is required) ORDERING INFORMATION T86 D 107 K 010 E A A S TYPE CASE CODE CAPACITANCE CAPACITANCE TOLERANCE DC VOLTAGE RATING AT + 85 °C TERMINATION/ PACKAGING RELIABILITY LEVEL SURGE CURRENT ESR See Ratings and Case Codes Table This is expressed in picofarads. The first two digits are the significant figures. The third is the number of zeros to follow. K = ± 10 % M = ± 20 % This is expressed in V. To complete the three-digit block, zeros precede the voltage rating. A decimal point is indicated by an “R” (6R3 = 6.3 V). C = Matte tin/ 7" (178 mm) reel H = Matte tin/ 7" (178 mm), 1/2 reel E = Tin/lead/ 7" (178 mm) reel L = Tin/lead/ 7" (178 mm), 1/2 reel A = 1.0 % B = 0.1 % S = Hi-Rel standard Z = Non-ER A = 10 cycles at + 25 °C B = 10 cycles at - 55 °C/+ 85 °C S = 3 cycles at + 25 °C S = Std. L = Low DIMENSIONS in inches [millimeters] L TW W H TH (MIN.) P CASE CODE EIA SIZE L W H P TW TH (MIN.) C 6032-28 0.236 ± 0.012 [6.0 ± 0.30] 0.126 ± 0.012 [3.2 ± 0.30] 0.098 ± 0.012 [2.5 ± 0.30] 0.051 ± 0.012 [1.3 ± 0.30] 0.087 ± 0.004 [2.2 ± 0.10] 0.039 [1.0] D 7343-31 0.287 ± 0.012 [7.3 ± 0.30] 0.169 ± 0.012 [4.3 ± 0.30] 0.110 ± 0.012 [2.8 ± 0.30] 0.051 ± 0.012 [1.3 ± 0.30] 0.094 ± 0.004 [2.4 ± 0.10] 0.039 [1.0] E 7343-43 0.287 ± 0.012 [7.3 ± 0.30] 0.169 ± 0.012 [4.3 ± 0.30] 0.157 ± 0.012 [4.0 ± 0.30] 0.051 ± 0.012 [1.3 ± 0.30] 0.094 ± 0.004 [2.4 ± 0.10] 0.039 [1.0] Revision: 03-Jan-12 Document Number: 40145 1 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFICDownloaded DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 From Oneyac.com T86 www.vishay.com Vishay Sprague RATINGS AND CASE CODES μF 4V 6.3 V 10 V 16 V 20 V 25 V 35 V 50 V 0.47 C 0.68 C 1.0 C 1.5 C C 2.2 C C C/D 3.3 C C C/D C C/D D D/E 4.7 C 6.8 10 C C C C D C C C/D D/E 15 C C C C/D D D/E 22 C C C/D D D/E E 33 C C/D C/D D/E E 47 C/D C/D D/E E 68 C C/D D/E D E 100 C D/E D E E 150 D D D/E 220 D D/E E 330 D/E E 470 E CONSTRUCTION AND MARKING Indicates Fused Product Capacitance μF Silver Adhesive Epoxy Encapsulation Anode Polarity Bar 22E10 Polarity Band XX Date Code Solderable Cathode Termination 2 Vishay Sprague Logo C, D, E, Cases MnO2/Carbon/ Silver Coating Sintered Tantalum Pellet Leadframe Fusible Wire Revision: 03-Jan-12 Voltage Solderable Anode Termination Marking: Capacitor marking includes an anode (+) polarity band, capacitance in microfarads and the voltage rating. The Vishay Sprague® trademark is included if space permits. Capacitors rated at 6.3 V are marked 6 V. A manufacturing date code is marked on all capacitors. Capital letter “E” stands for lead (Pb)-free terminations small cap letter “e” stands for SnPb Document Number: 40145 2 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFICDownloaded DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 From Oneyac.com T86 www.vishay.com Vishay Sprague STANDARD RATINGS CAPACITANCE (μF) CASE CODE PART NUMBER MAX. DC LEAKAGE AT + 25 °C (μA) MAX. DF AT + 25 °C 120 Hz (%) STANDARD (S) MAX. ESR AT + 25 °C 100 kHz (:) LOW (L) MAX. ESR AT + 25 °C 100 kHz (:) 4 VDC AT + 85 °C; 2.7 VDC AT + 125 °C 68 C T86C686(1)004(2)(3)(4)(5) 2.7 8 1.40 0.40 100 C T86C107(1)004(2)(3)(4)(5) 4.0 8 0.80 0.40 150 D T86D157(1)004(2)(3)(4)(5) 6.0 8 0.60 0.30 220 D T86D227(1)004(2)(3)(4)(5) 8.8 8 0.60 0.40 330 D T86D337(1)004(2)(3)(4)(5) 13.2 15 0.60 0.30 330 E T86E337(1)004(2)(3)(4)(5) 13.2 8 0.50 0.30 470 E T86E477(1)004(2)(3)(4)(5) 18.8 16 0.50 0.25 6.3 VDC AT + 85 °C; 4 VDC AT + 125 °C 15 C T86C156(1)6R3(2)(3)(4)(5) 0.9 6 1.80 0.60 22 C T86C226(1)6R3(2)(3)(4)(5) 1.1 6 1.80 0.60 33 C T86C336(1)6R3(2)(3)(4)(5) 1.6 6 1.40 0.60 47 C T86C476(1)6R3(2)(3)(4)(5) 2.3 6 1.30 0.60 47 D T86D476(1)6R3(2)(3)(4)(5) 2.3 6 0.90 0.45 68 C T86C686(1)6R3(2)(3)(4)S 3.3 6 0.80 n/a 68 D T86D686(1)6R3(2)(3)(4)(5) 3.3 6 0.70 0.35 100 D T86D107(1)6R3(2)(3)(4)(5) 6.0 8 0.70 0.35 100 E T86E107(1)6R3(2)(3)(4)(5) 6.0 8 0.70 0.30 150 D T86D157(1)6R3(2)(3)(4)(5) 9.0 8 0.60 0.30 220 D T86D227(1)6R3(2)(3)(4)(5) 13.2 8 0.60 0.30 220 E T86E227(1)6R3(2)(3)(4)(5) 13.2 8 0.50 0.30 330 E T86E337(1)6R3(2)(3)(4)(5) 19.8 8 0.50 0.30 10 VDC AT + 85 °C; 7 VDC AT + 125 °C 10 C T86C106(1)010(2)(3)(4)S 1.0 6 1.80 n/a 15 C T86C156(1)010(2)(3)(4)(5) 1.5 6 1.80 0.60 22 C T86C226(1)010(2)(3)(4)(5) 2.2 6 1.40 0.50 33 C T86C336(1)010(2)(3)(4)(5) 3.3 6 1.30 0.40 33 D T86D336(1)010(2)(3)(4)(5) 3.3 6 0.90 0.40 47 C T86C476(1)010(2)(3)(4)S 4.7 6 1.00 n/a 47 D T86D476(1)010(2)(3)(4)(5) 4.7 6 0.70 0.40 68 D T86D686(1)010(2)(3)(4)(5) 6.8 6 0.70 0.35 68 E T86E686(1)010(2)(3)(4)(5) 6.8 6 0.70 0.35 100 D T86D107(1)010(2)(3)(4)(5) 10.0 8 0.60 0.30 150 D T86D157(1)010(2)(3)(4)(5) 15.0 8 0.60 0.30 150 E T86E157(1)010(2)(3)(4)(5) 15.0 8 0.50 0.40 220 E T86E227(1)010(2)(3)(4)(5) 22.0 8 0.50 0.30 16 VDC AT + 85 °C; 10 VDC AT + 125 °C 6.8 C T86C685(1)016(2)(3)(4)(5) 1.1 6 2.00 0.60 10 C T86C106(1)016(2)(3)(4)(5) 1.6 6 1.80 0.70 15 C T86C156(1)016(2)(3)(4)S 2.4 6 1.40 n/a Note • Part number definitions: (1) Capacitance tolerance codes: K, M (2) Terminations and packaging codes: C, H, E, L (3) Reliability level: A, B, S, Z (4) Surge current: A, B, S (5) ESR: L, S Revision: 03-Jan-12 Document Number: 40145 3 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFICDownloaded DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 From Oneyac.com T86 www.vishay.com Vishay Sprague STANDARD RATINGS STANDARD (S) MAX. ESR AT + 25 °C 100 kHz (:) LOW (L) MAX. ESR AT + 25 °C 100 kHz (:) 6 1.30 0.70 6 0.90 0.45 5.3 6 1.00 0.50 5.3 6 0.70 0.35 MAX. DC LEAKAGE AT + 25 °C (μA) MAX. DF AT + 25 °C 120 Hz (%) CAPACITANCE (μF) CASE CODE PART NUMBER 22 C T86C226(1)016(2)(3)(4)(5) 3.5 22 D T86D226(1)016(2)(3)(4)(5) 3.5 33 C T86C336(1)016(2)(3)(4)(5) 33 D T86D336(1)016(2)(3)(4)(5) 47 D T86D476(1)016(2)(3)(4)(5) 7.5 6 0.70 0.35 47 E T86E476(1)016(2)(3)(4)(5) 7.5 6 0.70 0.35 16 VDC AT + 85 °C; 10 VDC AT + 125 °C 68 D T86D686(1)016(2)(3)(4)(5) 10.9 6 0.60 0.30 100 E T86E107(1)016(2)(3)(4)(5) 16.0 8 0.60 0.30 150 E T86E157(1)016(2)(3)(4)S 24.0 10 0.40 n/a 20 VDC AT + 85 °C; 13 VDC AT + 125 °C 4.7 C T86C475(1)020(2)(3)(4)(5) 0.9 6 2.00 1.00 6.8 C T86C685(1)020(2)(3)(4)(5) 1.4 6 1.90 0.60 10 C T86C106(1)020(2)(3)(4)(5) 2.0 6 1.60 0.80 15 C T86C156(1)020(2)(3)(4)S 3.0 6 1.40 n/a 15 D T86D156(1)020(2)(3)(4)(5) 3.0 6 0.90 0.45 22 D T86D226(1)020(2)(3)(4)(5) 4.4 6 0.70 0.35 33 D T86D336(1)020(2)(3)(4)(5) 6.6 6 0.70 0.40 33 E T86E336(1)020(2)(3)(4)(5) 6.6 6 0.70 0.40 47 E T86E476(1)020(2)(3)(4)(5) 9.4 6 0.60 0.30 68 E T86E686(1)020(2)(3)(4)(5) 13.6 6 0.60 0.30 2.2 C T86C225(1)025(2)(3)(4)S 0.6 6 2.80 n/a 3.3 C T86C335(1)025(2)(3)(4)(5) 0.8 6 2.30 2.10 4.7 C T86C475(1)025(2)(3)(4)(5) 1.2 6 1.90 1.00 6.8 C T86C685(1)025(2)(3)(4)(5) 1.7 6 1.60 0.60 10 C T86C106(1)025(2)(3)(4)(5) 2.5 6 1.40 0.60 10 D T86D106(1)025(2)(3)(4)(5) 2.5 6 1.00 0.50 15 D T86D156(1)025(2)(3)(4)(5) 3.8 6 0.80 0.40 22 D T86D226(1)025(2)(3)(4)(5) 5.5 6 0.70 0.35 22 E T86E226(1)025(2)(3)(4)(5) 5.5 6 0.70 0.35 33 E T86E336(1)025(2)(3)(4)(5) 8.3 6 0.60 0.30 25 VDC AT + 85 °C; 17 VDC AT + 125 °C 35 VDC AT + 85 °C; 23 VDC AT + 125 °C 1.5 C T86C155(1)035(2)(3)(4)(5) 0.5 6 3.80 2.60 2.2 C T86C225(1)035(2)(3)(4)S 0.8 6 2.90 n/a 3.3 C T86C335(1)035(2)(3)(4)S 1.2 6 2.00 n/a 4.7 C T86C475(1)035(2)(3)(4)S 1.6 6 1.80 n/a 4.7 D T86D475(1)035(2)(3)(4)(5) 1.6 6 1.20 0.60 6.8 D T86D685(1)035(2)(3)(4)(5) 2.4 6 1.00 0.50 10 D T86D106(1)035(2)(3)(4)(5) 3.5 6 0.80 0.50 Note • Part number definitions: (1) Capacitance tolerance codes: K, M (2) Terminations and packaging codes: C, H, E, L (3) Reliability level: A, B, S, Z (4) Surge current: A, B, S (5) ESR: L, S Revision: 03-Jan-12 Document Number: 40145 4 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFICDownloaded DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 From Oneyac.com T86 www.vishay.com Vishay Sprague STANDARD RATINGS STANDARD (S) MAX. ESR AT + 25 °C 100 kHz (:) LOW (L) MAX. ESR AT + 25 °C 100 kHz (:) 6 0.80 0.50 6 0.70 0.50 5.3 6 0.70 0.50 7.7 6 0.60 0.40 0.5 4 6.70 n/a 0.5 4 5.90 n/a T86C105(1)050(2)(3)(4)(5) 0.5 4 4.40 2.70 C T86C155(1)050(2)(3)(4)(5) 0.8 6 5.00 3.20 C T86C225(1)050(2)(3)(4)S 1.1 6 2.80 n/a 2.2 D T86D225(1)050(2)(3)(4)(5) 1.1 6 2.10 0.90 3.3 C T86C335(1)050(2)(3)(4)(5) 1.7 6 2.40 1.60 3.3 D T86D335(1)050(2)(3)(4)S 1.7 6 2.00 n/a 4.7 D T86D475(1)050(2)(3)(4)S 2.4 6 1.10 n/a 6.8 D T86D685(1)050(2)(3)(4)S 3.4 6 0.90 n/a 6.8 E T86E685(1)050(2)(3)(4)S 3.4 6 0.90 n/a MAX. DC LEAKAGE AT + 25 °C (μA) CAPACITANCE (μF) CASE CODE PART NUMBER 10 E T86E106(1)035(2)(3)(4)(5) 3.5 15 D T86D156(1)035(2)(3)(4)(5) 5.3 15 E T86E156(1)035(2)(3)(4)(5) 22 E T86E226(1)035(2)(3)(4)(5) 0.47 C T86C474(1)050(2)(3)(4)S 0.68 C T86C684(1)050(2)(3)(4)S 1.0 C 1.5 2.2 MAX. DF AT + 25 °C 120 Hz (%) 35 VDC AT + 85 °C; 23 VDC AT + 125 °C 50 VDC AT + 85 °C; 33 VDC AT + 125 °C Note • Part number definitions: (1) Capacitance tolerance codes: K, M (2) Terminations and packaging codes: C, H, E, L (3) Reliability level: A, B, S, Z (4) Surge current: A, B, S (5) ESR: L, S RECOMMENDED VOLTAGE DERATING GUIDELINES (for temperatures below + 85 °C) STANDARD CONDITIONS. FOR EXAMPLE: OUTPUT FILTERS Capacitor Voltage Rating Operating Voltage 4.0 2.5 6.3 3.6 10 6.0 16 10 20 12 25 15 35 24 50 28 SEVERE CONDITIONS. FOR EXAMPLE: INPUT FILTERS Revision: 03-Jan-12 Capacitor Voltage Rating Operating Voltage 4.0 2.5 6.3 3.3 10 5.0 16 8.0 20 10 25 12 35 15 50 24 Document Number: 40145 5 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFICDownloaded DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 From Oneyac.com T86 www.vishay.com Vishay Sprague TYPICAL CURVES AT + 25 °C, IMPEDANCE AND ESR VS. FREQUENCY “E” CASE “D” CASE 1.00 1.00 68 μF, 20 VDC 0.10 IMPEDANCE ESR ESR/Z, Ω ESR/Z, Ω IMPEDANCE ESR 0.10 220 μF, 10 VDC 330 μF, 6.3 VDC 470 μF, 4 VDC 0.01 0.01 0.1 1.0 10.0 100.0 0.1 1000.0 1.0 10.0 100.0 1000.0 FREQUENCY kHz FREQUENCY kHz POWER DISSIPATION CASE CODE MAXIMUM PERMISSIBLE POWER DISSIPATION AT + 25 °C (W) IN FREE AIR C 0.110 D 0.150 E 0.165 STANDARD PACKAGING QUANTITY CASE CODE UNITS PER REEL 7" REEL ½ 7" REEL C 500 250 D 500 250 E 400 200 PRODUCT INFORMATION Molded Guide • Pad Dimensions • Package Dimensions www.vishay.com/doc?40074 Moisture Sensitivity www.vishay.com/doc?40135 SELECTOR GUIDES Solid Tantalum Selector Guide www.vishay.com/doc?49053 Solid Tantalum Chip Capacitors www.vishay.com/doc?40091 FAQ Frequently Asked Questions Revision: 03-Jan-12 www.vishay.com/doc?40110 Document Number: 40145 6 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFICDownloaded DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 From Oneyac.com 单击下面可查看定价，库存，交付和生命周期等信息 >>Vishay(威世) Downloaded From Oneyac.com