TCLT110. Series
www.vishay.com
Vishay Semiconductors
Optocoupler, Phototransistor Output, SOP-6L5,
Half Pitch, Long Mini-Flat Package
FEATURES
5
4
3
• SMD low profile 5 pin package
• Isolation test voltage 5000 VRMS
• CTR flexibility available see order information
• Special construction
2
1
• Extra low coupling capacitance
• Connected base
22649
• DC input with transistor output
• Creepage distance > 8 mm
DESCRIPTION
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
The TCLT110. series consists of a phototransistor optically
coupled to a gallium arsenide infrared-emitting diode in a
5-lead SOP-6L package.
AGENCY APPROVALS
• UL1577, file no. E76222
APPLICATIONS
• CSA E76222 22.2 bulletin 5A
• Switchmode power supplies
• BSI IEC 60950 IEC 60065
• Computer peripheral interface
• DIN EN 60747-5-5
• Microprocessor system interface
• FIMKO
• CQC
Note
• See the safety standard approval list “Agency Table” for more
detailed information.
ORDERING INFORMATION
SOP-6L5
T
C
L
T
1
1
0
#
10.2 mm
PART NUMBER
AGENCY
CERTIFIED/PACKAGE
CTR (%)
5 mA
UL, cUL, VDE, BSI, FIMKO 50 to 600
SOP-6L5
Rev. 2.5, 16-May-13
10 mA
5 mA
63 to 125 100 to 200 160 to 320 50 to 150 100 to 300 80 to 160 130 to 260 200 to 400
TCLT1100 TCLT1102 TCLT1103 TCLT1104 TCLT1105 TCLT1106 TCLT1107 TCLT1108 TCLT1109
Document Number: 83514
1
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TCLT110. Series
www.vishay.com
Vishay Semiconductors
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
SYMBOL
VALUE
UNIT
INPUT
Reverse voltage
VR
6
V
Forward current
IF
60
mA
Forward surge current
tP 10 μs
IFSM
1.5
A
Pdiss
100
mW
Tj
125
°C
Collector emitter voltage
VCEO
80
V
Emitter collector voltage
VECO
7
V
mA
Power dissipation
Junction temperature
OUTPUT
Collector current
IC
50
ICM
100
mA
Pdiss
150
mW
Tj
125
°C
Isolation test voltage (RMS)
VISO
5000
VRMS
Total power dissipation
Ptot
250
mW
Operating ambient temperature range
Tamb
- 55 to + 100
°C
Storage temperature range
Tstg
- 55 to + 125
°C
Soldering temperature (1)
Tsld
260
°C
Collector peak current
tP/T = 0.5, tP 10 ms
Power dissipation
Junction temperature
COUPLER
Notes
• Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not
implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute
maximum ratings for extended periods of the time can adversely affect reliability.
(1) Wave soldering three cycles are allowed. Also refer to “Assembly Instruction” (www.vishay.com/doc?80054).
ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
SYMBOL
MIN.
TYP.
MAX.
1.6
UNIT
INPUT
Forward voltage
Junction capacitance
IF = ± 50 mA
VF
1.25
VR = 0 V, f = 1 MHz
Cj
50
IC = 1 mA
VCEO
70
7
V
pF
OUTPUT
Collector emitter voltage
Emitter collector voltage
V
IE = 100 μA
VECO
VCE = 20 V, IF = 0 A
ICEO
Collector emitter saturation voltage
IF = 10 mA, IC = 1 mA
VCEsat
Cut-off frequency
VCE = 5 V, IF = 10 mA,
RL = 100
fc
110
kHz
f = 1 MHz
Ck
0.3
pF
Collector emitter leakage current
V
10
100
nA
0.3
V
COUPLER
Coupling capacitance
Note
• Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering
evaluation. Typical values are for information only and are not part of the testing requirements.
Rev. 2.5, 16-May-13
Document Number: 83514
2
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TCLT110. Series
www.vishay.com
Vishay Semiconductors
CURRENT TRANSFER RATIO (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
PART
SYMBOL
MIN.
VCE = 5 V, IF = 5 mA
TCLT1100
CTR
50
TCLT1102
CTR
63
125
%
TCLT1103
CTR
100
200
%
VCE = 5 V, IF = 10 mA
VCE = 5 V, IF = 1 mA
IC/IF
VCE = 5 V, IF = 5 mA
TYP.
MAX.
UNIT
600
%
TCLT1104
CTR
160
TCLT1102
CTR
22
320
%
TCLT1103
CTR
TCLT1104
CTR
TCLT1105
CTR
50
150
%
TCLT1106
CTR
100
300
%
TCLT1107
CTR
80
160
%
TCLT1108
CTR
130
260
%
TCLT1109
CTR
200
400
%
45
%
34
70
%
56
100
%
SAFETY AND INSULATION RATED PARAMETERS
PARAMETER
TEST CONDITION
SYMBOL
MIN.
TYP.
MAX.
UNIT
Partial discharge test voltage -
routine test
100 %, ttest = 1 s
Vpd
2.0
Partial discharge test voltage -
lot test (sample test)
tTr = 60 s, ttest = 10 s,
(see figure 2)
VIOTM
8
kV
Vpd
1.68
kV
kV
VIO = 500 V
RIO
1012
VIO = 500 V, Tamb = 100 °C
RIO
1011
VIO = 500 V, Tamb = 150 °C
(construction test only)
RIO
109
Isi
130
mA
Pso
265
mW
VIOTM
8
kV
Tsi
150
°C
Clearance distance
8.0
mm
Creepage distance
8.0
mm
Insulation distance (internal)
0.40
mm
Insulation resistance
Forward current
Power dissipation
Rated impulse voltage
Safety temperature
Note
• According to DIN EN 60747-5-2 (VDE 0884) (see figure 2). This optocoupler is suitable for safe electrical isolation only within the safety
ratings. Compliance with the safety ratings shall be ensured by means of suitable protective circuits.
VIOTM
300
t1, t2
t3 , t4
ttest
tstres
Phototransistor
Pso (mW)
250
200
= 1 s to 10 s
=1s
= 10 s
= 12 s
Vpd
150
VIOWM
VIORM
100
IR-diode
Isi (mA)
50
0
0
0
94 9182-2
25
50
75
100
Tsi - Safety Temperature (°C)
Fig. 1 - Derating Diagram
Rev. 2.5, 16-May-13
125
150
13930
t3 ttest t4
t1
tTr = 60 s
t2
t stres
t
Fig. 2 - Test Pulse Diagram for Sample Test According to
DIN EN 60747-5-2 (VDE 0884); IEC 60747-5-5
Document Number: 83514
3
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TCLT110. Series
www.vishay.com
Vishay Semiconductors
SWITCHING CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
SYMBOL
Delay time
VS = 5 V, IC = 2 mA, RL = 100 ,
(see figure 3)
MIN.
TYP.
MAX.
UNIT
td
3.0
μs
Rise time
VS = 5 V, IC = 2 mA, RL = 100 ,
(see figure 3)
tr
3.0
μs
Turn-on time
VS = 5 V, IC = 2 mA, RL = 100 ,
(see figure 3)
ton
6.0
μs
Storage time
VS = 5 V, IC = 2 mA, RL = 100 ,
(see figure 3)
ts
0.3
μs
Fall time
VS = 5 V, IC = 2 mA, RL = 100 ,
(see figure 3)
tf
4.7
μs
Turn-off time
VS = 5 V, IC = 2 mA, RL = 100 ,
(see figure 3)
toff
5.0
μs
Turn-on time
VS = 5 V, IF = 10 mA, RL = 1 k,
(see figure 4)
ton
9.0
μs
Turn-off time
VS = 5 V, IF = 10 mA, RL = 1 k,
(see figure 4)
toff
10.0
μs
IF
0
+5V
IF
IF
0
I C = 2 mA; adjusted through
input amplitude
tp
IC
t
100 %
90 %
R G = 50 Ω
tp
= 0.01
T
t p = 50 µs
Channel I
Channel II
50 Ω
Oscilloscope
R L = 1 MΩ
C L = 20 pF
10 %
0
tr
td
100 Ω
t on
tp
td
tr
t on (= td + tr)
95 10804
Fig. 3 - Test Circuit, Non-Saturated Operation
IF
Pulse duration
Delay time
Rise time
Turn-on time
ts
tf
t off
ts
tf
t off (= ts + tf)
t
Storage time
Fall time
Turn-off time
96 11698
Fig. 5 - Switching Times
+5V
I F = 10 mA
0
IC
R G = 50 Ω
tp
= 0.01
T
t p = 50 µs
Channel I
Channel II
50 Ω
Oscilloscope
R L ≥ 1 MΩ
C L ≤ 20 pF
1 kΩ
95 10843
Fig. 4 - Test Circuit, Saturated Operation
Rev. 2.5, 16-May-13
Document Number: 83514
4
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TCLT110. Series
www.vishay.com
Vishay Semiconductors
PACKAGE DIMENSIONS in millimeters
2.30 max.
4.10 max.
10.20
3.80
+ 0.30
- 0.40
0.20
2.00
0.10 ± 0.10
+ 0.10
- 0.05
7.50 ± 0.20
0.45 ± 0.1
0.70
+ 0.30
- 0.40
2.54 nom.
1.27 nom.
4
5
3
2.54
Possible footprint
0.90
8.20
1
22534
10.80
technical drawings
according to DIN
specifications
2
Pin no. 1 identification
PACKAGE MARKING (example)
TCLT1103
V YWW 68
TAPE AND REEL DIMENSIONS in millimeters
Ø 1.55
2.7
4
2
0.3
7.5
Tape slot
in core
1.75
ESD sticker
10.6
16
330
(13")
5°
4.25
8
Ø 1.6
Regular, special
or bar code label
17999
Fig. 6 - Reel Dimensions (3000 units per reel)
Rev. 2.5, 16-May-13
2.3
Direction of pulling out
technical drawings
according to DIN
specification
22662
Fig. 7 - Tape Dimensions
Document Number: 83514
5
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 08-Feb-17
1
Document Number: 91000
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Vishay:
TCLT1100 TCLT1102 TCLT1103 TCLT1105 TCLT1106 TCLT1107 TCLT1108 TCLT1109 TCLT1101 TCLT1104
TCLT1119 TCLT1116 TCLT1115 TCLT1112 TCLT1114 TCLT1118 TCLT1117 TCLT1110 TCLT1113 TCLT1111