TCMT110. Series
www.vishay.com
Vishay Semiconductors
Optocoupler, Phototransistor Output, Single Channel,
Half Pitch Mini-Flat Package
C
E
4
3
FEATURES
• Low profile package (half pitch)
• AC isolation test voltage 3750 VRMS
• Low coupling capacitance of typical 0.3 pF
• Current transfer ratio (CTR) selected into groups
1
2
• Low temperature coefficient of CTR
A
C
• Wide ambient temperature range
22628-1
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
DESCRIPTION
APPLICATIONS
The TCMT110. series consist of a phototransistor optically
coupled to a gallium arsenide infrared-emitting diode in a
4 pin package.
• Programmable logic controllers
• Modems
• Answering machines
The elements are mounted on one leadframe providing a
fixed distance between input and output for highest safety
requirements.
• General applications
AGENCY APPROVALS
• UL1577, file no. E76222, double protection
• cUL component acceptance service no. 5A, double
protection
• DIN EN 60747-5-5 (VDE 0884-5)
• FIMKO: FI EN 60950-1:2006
• BSI: BS EN60065:2002
BS EN60950-1:2006
• CQC GB 8898-2011, GB 4943.1-2011 (suitable for
installation altitude below 2000 m)
ORDERING INFORMATION
SSOP-4
T
C
M
T
1
1
0
#
PART NUMBER
AGENCY
CERTIFIED/
PACKAGE
CTR (%)
5 mA
UL, cUL, FIMKO,
50 to 600
BSI, VDE
SSOP-4
7.21 mm
10 mA
40 to 80
63 to 125 100 to 200 160 to 320 50 to 150 100 to 300
TCMT1100 TCMT1101 TCMT1102 TCMT1103 TCMT1104 TCMT1105 TCMT1106
5 mA
80 to 160
130 to 260 200 to 400
TCMT1107,
TCMT1108 TCMT1109
TCMT1107T3 (1)
Notes
• Available only on tape and reel
(1) Product is rotated 180° in tape and reel cavity
Document Number: 83510
1
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Rev. 3.1, 25-Jun-2018
TCMT110. Series
www.vishay.com
Vishay Semiconductors
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
SYMBOL
VALUE
UNIT
INPUT
Reverse voltage
VR
6
V
Forward current
IF
60
mA
Forward surge current
tp ≤ 10 μs
IFSM
1.5
A
Pdiss
100
mW
Tj
125
°C
Collector emitter voltage
VCEO
70
V
Emitter collector voltage
VECO
7
V
mA
Power dissipation
Junction temperature
OUTPUT
Collector current
Collector peak current
tp/T = 0.5, tp ≤ 10 ms
Power dissipation
Junction temperature
IC
50
ICM
100
mA
Pdiss
150
mW
Tj
125
°C
VISO
3750
VRMS
COUPLER
AC isolation test voltage (RMS)
Related to standard climate 23/50
DIN 50014
Total power dissipation
Ptot
250
mW
Operating ambient temperature range
Tamb
-40 to +100
°C
Storage temperature range
Tstg
-40 to +125
°C
Soldering temperature (1)
Tsld
260
°C
Notes
• Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not
implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute
maximum ratings for extended periods of the time can adversely affect reliability
(1) Refer to reflow profile for soldering conditions for surface mounted devices. Also refer to “Assembly Instructions”
(www.vishay.com/doc?80054)
ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
SYMBOL
MIN.
TYP.
MAX.
IF = 50 mA
VF
-
1.35
1.6
VR = 0, f = 1 MHz
Cj
-
8
UNIT
INPUT
Forward voltage
Junction capacitance
V
pF
OUTPUT
Collector emitter voltage
IC = 100 μA
VCEO
70
-
-
V
Emitter collector voltage
IE = 100 μA
VECO
7
-
-
V
VCE = 20 V, IF = 0 A
ICEO
-
-
100
nA
Collector emitter saturation voltage
IF = 10 mA, IC = 1 mA
VCEsat
-
-
0.3
V
Cut-off frequency
VCE = 5 V, IF = 10 mA,
RL = 100 Ω
fc
-
100
-
kHz
f = 1 MHz
Ck
-
0.3
-
pF
Collector dark current
COUPLER
Coupling capacitance
Note
• Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering
evaluation. Typical values are for information only and are not part of the testing requirements
Document Number: 83510
2
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Rev. 3.1, 25-Jun-2018
TCMT110. Series
www.vishay.com
Vishay Semiconductors
CURRENT TRANSFER RATIO (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
PART
SYMBOL
MIN.
TYP.
MAX.
UNIT
VCE = 5 V, IF = 5 mA
TCMT1100
CTR
50
-
600
%
TCMT1101
CTR
40
-
80
%
TCMT1102
CTR
63
-
125
%
TCMT1103
CTR
100
-
200
%
TCMT1104
CTR
160
-
320
%
TCMT1105
CTR
50
-
150
%
TCMT1106
CTR
100
-
300
%
TCMT1107
CTR
80
-
160
%
TCMT1108
CTR
130
-
260
%
TCMT1109
CTR
200
-
400
%
VCE = 5 V, IF = 10 mA
IC/IF
VCE = 5 V, IF = 5 mA
SWITCHING CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
TEST CONDITION
SYMBOL
MIN.
TYP.
MAX.
UNIT
Delay time
PARAMETER
VS = 5 V, IC = 2 mA, RL = 100 Ω, (see figure 1)
td
-
4.0
-
μs
Rise time
VS = 5 V, IC = 2 mA, RL = 100 Ω, (see figure 1)
tr
-
5.5
-
μs
Fall time
VS = 5 V, IC = 2 mA, RL = 100 Ω, (see figure 1)
tf
-
7.0
-
μs
Storage time
VS = 5 V, IC = 2 mA, RL = 100 Ω, (see figure 1)
ts
-
1.5
-
μs
Turn-on time
VS = 5 V, IC = 2 mA, RL = 100 Ω, (see figure 1)
ton
-
9.5
-
μs
Turn-off time
VS = 5 V, IC = 2 mA, RL = 100 Ω, (see figure 1)
toff
-
8.5
-
μs
Turn-on time
VS = 5 V, IF = 10 mA, RL = 1 kΩ, (see figure 2)
ton
-
3.0
-
μs
Turn-off time
VS = 5 V, IF = 10 mA, RL = 1 kΩ, (see figure 2)
toff
-
20.0
-
μs
+5V
IF
IF
0
IF
I C = 2 mA; adjusted through
input amplitude
tp
t
100 %
90 %
R G = 50 Ω
tp
= 0.01
T
t p = 50 µs
Channel I
Oscilloscope
R L = 1 MΩ
C L = 20 pF
Channel II
50 Ω
10 %
0
tr
td
100 Ω
Fig. 1 - Test Circuit, Non-Saturated Operation
0
tp
td
tr
t on (= td + tr)
Pulse duration
Delay time
Rise time
Turn-on time
tf
t off
ts
tf
t off (= ts + tf)
t
Storage time
Fall time
Turn-off time
96 11698
Fig. 3 - Switching Times
+5V
I F = 10 mA
ts
t on
95 10804
IF
0
IC
IC
R G = 50 Ω
tp
= 0.01
T
t p = 50 µs
Channel I
Channel II
50 Ω
Oscilloscope
R L ≥ 1 MΩ
C L ≤ 20 pF
1 kΩ
95 10843
Fig. 2 - Test Circuit, Saturated Operation
Document Number: 83510
3
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Rev. 3.1, 25-Jun-2018
TCMT110. Series
www.vishay.com
Vishay Semiconductors
SAFETY AND INSULATION RATINGS
PARAMETER
TEST CONDITION
SYMBOL
Climatic classification
According to IEC 68 part 1
Pollution degree
According to DIN VDE 0109
Comparative tracking index
VALUE
UNIT
40 / 110 / 21
2
Insulation group IIIa
CTI
175
Maximum rated withstanding isolation voltage
According to UL1577, t = 1 min
VISO
3750
Maximum transient isolation voltage
According to DIN EN 60747-5-5
VIOTM
6000
Vpeak
Maximum repetitive peak isolation voltage
According to DIN EN 60747-5-5
VIORM
707
Vpeak
≥ 1012
Tamb = 25 °C, VIO = 500 V
Isolation resistance
VRMS
≥ 1011
RIO
Tamb = 100 °C, VIO = 500 V
Ω
≥ 109
Tamb = TS, VIO = 500 V
Output safety power
PSO
350
mW
Input safety current
ISI
150
mA
Input safety temperature
TS
175
°C
≥5
mm
Creepage distance
≥5
mm
DTI
≥ 0.4
mm
Input to output test voltage, method B
VIORM x 1.875 = VPR, 100 % production test
with tM = 1 s, partial discharge < 5 pC
VPR
1326
Vpeak
Input to output test voltage, method A
VIORM x 1.6 = VPR, 100 % sample test
with tM = 10 s, partial discharge < 5 pC
VPR
1132
Vpeak
Clearance distance
Insulation thickness
100
300
Coupled device
IF - Forward Current (mA)
Ptot - Total Power Dissipation (mW)
TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
250
200
Phototransistor
150
IR-diode
100
50
0
0
96 11700
40
80
120
Tamb - Ambient Temperature (°C)
Fig. 4 - Total Power Dissipation vs. Ambient Temperature
10
Tamb = 110 °C
Tamb = 75 °C
Tamb = 25 °C
Tamb = 0 °C
Tamb = -55 °C
1
0.1
0.6
0.8
1.0
1.2
1.4
1.6
VF - Forward Voltage (V)
Fig. 5 - Forward Voltage vs. Forward Current
Document Number: 83510
4
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Rev. 3.1, 25-Jun-2018
TCMT110. Series
www.vishay.com
IC - Collector Current (mA)
55
IF = 35 mA
50
45
IF = 30 mA
40
35
IF = 25 mA
30
IF = 20 mA
25
20
IF = 15 mA
15
10
IF = 10 mA
IF = 1 mA
5
IF = 5 mA
0
0
1
2
3
4
5
6
7
8
9
10
NCTR - Normalized CTR (non-saturated)
Vishay Semiconductors
1.2
IF = 5 mA
1.0
0.8
0.6
0.4
0.2
0
-60 -40 -20
VCE - Collector Emitter Voltage (non-sat) (V)
Fig. 6 - Collector Current vs. Collector Emitter Voltage
20
40
60
80 100 120
Fig. 9 - Normalized Current Transfer Ratio (non-saturated) vs.
Ambient Temperature
1.2
NCTR - Normalized CTR (sat)
IF = 0 mA
ICE0 - Leakage Current (nA)
0
Tamb - Ambient Temperature (°C)
10 000
1000
VCE = 40 V
100
10
VCE = 24 V
1
0.1
VCE = 12 V
0.01
IF = 5 mA
1.0
0.8
0.6
0.4
0.2
0
-60 -40 -20
0
20
40
60
IF = 10 mA
10
IF = 5 mA
6
4
IF = 1 mA
IF = 2 mA
2
0
0
0.1
0.2
0.3
20
40
60
80 100 120
Fig. 10 - Normalized Current Transfer Ratio (saturated) vs.
Ambient Temperature
VCEsat - Collector Emitter Voltage (V)
14
8
0
Tamb - Ambient Temperature (°C)
Fig. 7 - Leakage Current vs. Ambient Temperature
12
Normalized to CTR value:
IF = 5 mA, VCE = 5 V, Tamb = 25 °C
-60 -40 -20
80 100 120
Tamb - Ambient Temperature (°C)
IC - Collector Current (mA)
Normalized to CTR value:
IF = 5 mA, VCE = 5 V, Tamb = 25 °C
0.4
VCE - Collector Emitter Voltage (V)
Fig. 8 - Collector Current vs. Collector Emitter Voltage
0.40
0.35
IF = 10 mA
0.30
Ic = 5 mA
0.25
0.20
Ic = 2 mA
0.15
0.10
0.05
Ic = 1 mA
0.00
-60 -40 -20
0
20
40
60
80 100 120
Tamb - Ambient Temperature (°C)
Fig. 11 - Collector Emitter Voltage vs. Ambient Temperature
Document Number: 83510
5
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Rev. 3.1, 25-Jun-2018
TCMT110. Series
www.vishay.com
Vishay Semiconductors
1000
Tamb = 0 °C
1.2
VCC = 5 V
Tamb = -55 °C
Tamb = 25 °C
1.0
FCTR (kHz)
NCTR - Normalized CTR (NS)
1.4
0.8
0.6
Tamb = 75 °C
0.4
Tamb = 100 °C
Normalized to:
IF = 5 mA, VCE = 5 V,
Tamb = 25 °C
0.2
0
0.1
1
10
100
10
1
0.1
100
1
IF - Forward Current (mA)
Fig. 12 - Normalized CTR (non-saturated) vs. Forward Current
100
Fig. 15 - FCTR vs. Collector Current
1000
1.2
Tamb = 0 °C
VCE = 0.4 V
Normalized to:
IF = 5 mA,
VCE = 5 V,
Tamb = 25 °C
1.0
0.8
VCE = 5 V, IC = 2 mA
Tamb = -55
- °C
0.6
0.4
Tamb = 25 °C
0.2
Tamb = 75 °C
Tamb = 100 °C
0
0.1
1
10
ton, toff Switching Time (μs)
NCTR - Normalized CTR (sat)
10
IC (mA)
100
toff (μs)
10
1
ton (μs)
0.1
100
0
5
10
15
20
RL - Load Resistance (kΩ)
IF - Forward Current (mA)
Fig. 13 - Normalized CTR (saturated) vs. Forward Current
Fig. 16 - Switching Time vs. Load Resistance
0
VCE = 5 V
-20
RL = 100 Ω
Phase Angle (deg)
-40
RL = 1000 Ω
-60
-80
-100
-120
-140
-160
1
10
100
1000
f - Frequency (kHz)
Fig. 14 - FCTR vs. Phase Angle
Document Number: 83510
6
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Rev. 3.1, 25-Jun-2018
TCMT110. Series
www.vishay.com
Vishay Semiconductors
0.60
0.10 ± 0.10
0.4 ± 0.1
4.40 typ.
0.2 ± 0.05
2.85 max.
2.60 ± 0.20
2.00 ± 0.10
PACKAGE DIMENSIONS in millimeters
1.27 nom.
4
+ 0.20
- 0.30
7.00 ± 0.30
Lead coplanarity
0.1 max.
3
1.27
0.9
Possible footprint
5.00
7.60
Pin One I.D.
1
2
PACKAGE MARKING (example)
MT1100
V YWW 68
TAPE AND REEL PACKAGING in millimeters
2 ± 0.1
0.3 ± 0.05
4 ± 0.1
1.55 ± 0.05
1.75 ± 0.1
Pin 1
7.5 ± 0.1
16 ± 0.3
4.4
7.4 ± 0.1
7.4 ± 0.1
5°
2.2 ± 0.1
2.6 ± 0.1
8 ± 0.1
2.95 ± 0.1
1.6 ± 0.1
Fig. 17
Document Number: 83510
7
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Rev. 3.1, 25-Jun-2018
TCMT110. Series
www.vishay.com
Vishay Semiconductors
SOLDER PROFILES
HANDLING AND STORAGE CONDITIONS
ESD level: HBM class 2
Axis Title
10000
300
Floor life: unlimited
Max. 260 °C
255 °C
240 °C
217 °C
Conditions: Tamb < 30 °C, RH < 85 %
245 °C
Moisture sensitivity level 1, according to J-STD-020
1000
200
Max. 30 s
1st line
2nd line
2nd line
Temperature (°C)
250
150
Max. 120 s
100
Max. 100 s
Max. ramp down 6 °C/s
100
Max. ramp up 3 °C/s
50
10
0
0
50
100
150
200
250
300
Time (s)
19841
Fig. 18 - Lead (Pb)-free Reflow Solder Profile
According to J-STD-020 for SMD Devices
Document Number: 83510
8
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Rev. 3.1, 25-Jun-2018
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jan-2022
1
Document Number: 91000
