TCMT1600, TCMT4600, TCMT4606
www.vishay.com
Vishay Semiconductors
Optocoupler, Phototransistor Output, AC Input,
Single / Quad Channel, Half Pitch Mini-Flat Package
FEATURES
• Low profile package (half pitch)
• AC isolation test voltage 3750 VRMS
• Low coupling capacitance of typical 0.3 pF
• Low temperature coefficient of CTR
• Wide ambient temperature range
22628-1
22775
C
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
E
9
APPLICATIONS
• Programmable logic controllers
1
2
A
8
AGENCY APPROVALS
C
4 PIN
• UL / cUL 1577
16 PIN
• DIN EN 60747-5-5 (VDA 0884-5)
• FIMKO
• BSI
LINKS TO ADDITIONAL RESOURCES
• CQC
3D 3D
Related
Documents
Design Tools
Schematics
EDA / CAD
3D Models
Models
Footprints
DESCRIPTION
The low profile miniflat package includes an optocoupler
with AC Input and transistor output. It is available in single
channel (4 pin) TCMT1600 or quad channel (16 pin)
TCMT4600.
ORDERING INFORMATION
T
C
M
T
#
6
0
#
7 mm
PART NUMBER
AGENCY CERTIFIED / PACKAGE
SOP-#
CTR (%)
SINGLE CHANNEL
UL, cUL, FIMKO, BSI, CQC, VDE
QUAD CHANNEL
80 to 300
80 to 300
100 to 300
SOP-4
TCMT1600
-
-
SOP-4
TCMT1600T3 (1)
-
-
SOP-16
-
TCMT4600
TCMT4606
SOP-16
-
TCMT4600T0 (1)
-
Notes
• Available only on tape and reel
(1) Product is rotated 180° in tape and reel cavity
Rev. 2.7, 20-Aug-2021
Document Number: 83512
1
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TCMT1600, TCMT4600, TCMT4606
www.vishay.com
Vishay Semiconductors
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
SYMBOL
VALUE
UNIT
tp ≤ 10 μs
IF
± 60
mA
IFSM
± 1.5
A
Pdiss
100
mW
Tj
125
°C
Collector emitter voltage
VCEO
70
V
Emitter collector voltage
VECO
7
V
IC
50
mA
INPUT
Forward current
Forward surge current
Power dissipation
Junction temperature
OUTPUT
Collector current
tp/T = 0.5, tp ≤ 10 ms
Collector peak current
ICM
100
mA
Pdiss
150
mW
Tj
125
°C
AC isolation test voltage (RMS)
VISO
3750
VRMS
Total power dissipation
Ptot
250
mW
Operating ambient temperature range
Tamb
-40 to +100
°C
Storage temperature range
Tstg
-40 to +125
°C
Tsld
260
°C
Power dissipation
Junction temperature
COUPLER
Soldering temperature
(1)
Notes
• Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not
implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute
maximum ratings for extended periods of the time can adversely affect reliability
(1) Wave soldering three cycles are allowed. Also refer to “Assembly Instructions” (www.vishay.com/doc?80054)
ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
SYMBOL
MIN.
TYP.
MAX.
UNIT
INPUT
Forward voltage
IF = ± 50 mA
VF
-
1.35
1.6
V
VR = 0 V, f = 1 MHz
Cj
-
8
-
pF
Collector emitter voltage
IC = 100 μA
VCEO
70
-
-
V
Emitter collector voltage
IE = 100 μA
VECO
7
-
-
V
VCE = 20 V, IF = 0
ICEO
-
-
100
nA
Collector emitter saturation voltage
IF = ± 10 mA, IC = 1 mA
VCEsat
-
-
0.3
V
Cut-off frequency
VCE = 5 V, IF = ± 10 mA,
RL = 100 Ω
fc
-
100
-
kHz
f = 1 MHz
CIO
-
0.3
-
pF
Junction capacitance
OUTPUT
Collector dark current
COUPLER
Capacitance (input to output)
Note
• Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering
evaluation. Typical values are for information only and are not part of the testing requirements
CURRENT TRANSFER RATIO (Tamb = 25 °C, unless otherwise specified)
PARAMETER
IC/IF
Rev. 2.7, 20-Aug-2021
TEST CONDITION
VCE = 5 V, IF = ± 5 mA
PART
SYMBOL
MIN.
TYP.
MAX.
UNIT
TCMT1600
CTR
80
-
300
%
TCMT4600
CTR
80
-
300
%
TCMT4606
CTR
100
-
300
%
Document Number: 83512
2
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TCMT1600, TCMT4600, TCMT4606
www.vishay.com
Vishay Semiconductors
SWITCHING CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
SYMBOL
MIN.
TYP.
MAX.
UNIT
Delay time
VS = 5 V, IC = 2 mA, RL = 100 Ω
(see figure 1)
td
-
3
-
μs
Rise time
VS = 5 V, IC = 2 mA, RL = 100 Ω
(see figure 1)
tr
-
3
-
μs
Fall time
VS = 5 V, IC = 2 mA, RL = 100 Ω
(see figure 1)
tf
-
4.7
-
μs
Storage time
VS = 5 V, IC = 2 mA, RL = 100 Ω
(see figure 1)
ts
-
0.3
-
μs
Turn-on time
VS = 5 V, IC = 2 mA, RL = 100 Ω
(see figure 1)
ton
-
6
-
μs
Turn-off time
VS = 5 V, IC = 2 mA, RL = 100 Ω
(see figure 1)
toff
-
5
-
μs
Turn-on time
VS = 5 V, IF = ± 10 mA, RL = 1 kΩ
(see figure 2)
ton
-
9
-
μs
Turn-off time
VS = 5 V, IF = ± 10 mA, RL = 1 kΩ
(see figure 2)
toff
-
18
-
μs
IF
IF
0
+5V
IF
IC = 2 mA;
RG = 50 Ω
tp
= 0.01
T
tp = 50 µs
0
Adjusted Through
Input Amplitude
10 %
0
50 Ω
100 Ω
15234
tr
td
Oscilloscope
Channel II
RL = 1 MΩ
CL = 20 pF
Fig. 1 - Test Circuit, Non-Saturated Operation
IF
t
100 %
90 %
Channel I
0
tp
IC
IF = 10 mA
t on
tp
td
tr
t on (= td + tr)
Pulse duration
Delay time
Rise time
Turn-on time
ts
tf
t off
ts
tf
t off (= ts + tf)
t
Storage time
Fall time
Turn-off time
96 11698
Fig. 3 - Switching Times
+5V
RG = 50 Ω
tp
= 0.01
T
t p = 50 µs
Channel I
Channel II
50 Ω
15235
1 kΩ
Oscilloscope
R L = 1 MΩ
C L = 20 pF
Fig. 2 - Test Circuit, Saturated Operation
Rev. 2.7, 20-Aug-2021
Document Number: 83512
3
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TCMT1600, TCMT4600, TCMT4606
www.vishay.com
Vishay Semiconductors
SAFETY AND INSULATION RATINGS
PARAMETER
TEST CONDITION
SYMBOL
Climatic classification (according to IEC 68 part 1)
VALUE
UNIT
55 / 110 / 21
Comparative tracking index
CTI
175
VISO
3750
Maximum transient isolation voltage
VIOTM
6000
V
Maximum repetitive peak isolation voltage
VIORM
707
V
VIO = 500 V, Tamb = 100 °C
RIO
1011
Ω
VIO = 500 V, Tamb = TSI
RIO
109
Ω
Output safety power
PSO
350
mW
Input safety current
ISI
200
mA
Maximum rated withstanding isolation voltage
40 % to 60 % RH, AC test of 1 min
Insulation resistance
Isolation resistance (under fault conditions)
Input safety temperature
VRMS
TSI
175
°C
Apparent charge test voltage (method A)
VIORM x 1.6 = VPR, type and sample test
tm = 60 s, partial discharge < 5 pC
VPR
1132
Vpeak
Apparent charge test voltage (method B)
VIORM x 1.875 = VPR, 100 % production
test with tm = 1 s, partial discharge < 5 pC
VPR
1326
Vpeak
≥5
mm
≥5
mm
≥ 0.4
mm
Creepage distance
Clearance distance
Insulation thickness
DTI
Environment (pollution degree in accordance to DIN VDE 0109)
2
Note
• As per IEC 60747-5-5, § 7.4.3.8.2, this optocoupler is suitable for “safe electrical insulation” only within the safety ratings. Compliance with
the safety ratings shall be ensured by means of protective circuits
100
300
Coupled device
IF - Forward Current (mA)
Ptot - Total Power Dissipation (mW)
TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
250
200
Phototransistor
150
IR-diode
100
50
1
0.1
0
0
9611700-1
10
Tamb = 110 °C
Tamb = 75 °C
Tamb = 25 °C
Tamb = 0 °C
Tamb = -55 °C
40
80
120
Tamb - Ambient Temperature (°C)
Fig. 4 - Total Power Dissipation vs. Ambient Temperature
Rev. 2.7, 20-Aug-2021
0.6
0.8
1.0
1.2
1.4
1.6
VF - Forward Voltage (V)
Fig. 5 - Forward Voltage vs. Forward Current
Document Number: 83512
4
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TCMT1600, TCMT4600, TCMT4606
www.vishay.com
IC - Collector Current (mA)
55
IF = 35 mA
50
45
IF = 30 mA
40
35
IF = 25 mA
30
IF = 20 mA
25
20
IF = 15 mA
15
10
IF = 10 mA
IF = 1 mA
5
IF = 5 mA
0
0
1
2
3
4
5
6
7
8
9
10
NCTR - Normalized CTR (non-saturated)
Vishay Semiconductors
1.2
IF = 5 mA
1.0
0.8
0.6
0.4
0.2
0
-60 -40 -20
VCE - Collector Emitter Voltage (non-sat) (V)
Fig. 6 - Collector Current vs. Collector Emitter Voltage
20
40
60
80 100 120
Fig. 9 - Normalized Current Transfer Ratio (non-saturated) vs.
Ambient Temperature
1.2
NCTR - Normalized CTR (sat)
IF = 0 mA
ICE0 - Leakage Current (nA)
0
Tamb - Ambient Temperature (°C)
10 000
1000
VCE = 40 V
100
10
VCE = 24 V
1
0.1
VCE = 12 V
0.01
0.001
IF = 5 mA
1.0
0.8
0.6
0.4
0.2
0
-60 -40 -20
0
20
40
60
IF = 10 mA
10
IF = 5 mA
6
4
IF = 1 mA
IF = 2 mA
2
0
0
0.1
0.2
0.3
0.4
VCE - Collector Emitter Voltage (V)
Fig. 8 - Collector Current vs. Collector Emitter Voltage
Rev. 2.7, 20-Aug-2021
20
40
60
80 100 120
Fig. 10 - Normalized Current Transfer Ratio (saturated) vs.
Ambient Temperature
VCEsat - Collector Emitter Voltage (V)
14
8
0
Tamb - Ambient Temperature (°C)
Fig. 7 - Leakage Current vs. Ambient Temperature
12
Normalized to CTR value:
IF = 5 mA, VCE = 5 V, Tamb = 25 °C
-60 -40 -20
80 100 120
Tamb - Ambient Temperature (°C)
IC - Collector Current (mA)
Normalized to CTR value:
IF = 5 mA, VCE = 5 V, Tamb = 25 °C
0.40
0.35
IF = 10 mA
0.30
Ic = 5 mA
0.25
0.20
Ic = 2 mA
0.15
0.10
0.05
Ic = 1 mA
0.00
-60 -40 -20
0
20
40
60
80 100 120
Tamb - Ambient Temperature (°C)
Fig. 11 - Collector Emitter Voltage vs. Ambient Temperature
Document Number: 83512
5
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TCMT1600, TCMT4600, TCMT4606
www.vishay.com
Vishay Semiconductors
1000
Tamb = 0 °C
1.2
VCC = 5 V
Tamb = -55 °C
Tamb = 25 °C
1.0
FCTR (kHz)
NCTR - Normalized CTR (NS)
1.4
0.8
0.6
Tamb = 75 °C
0.4
Tamb = 100 °C
Normalized to:
IF = 5 mA, VCE = 5 V,
Tamb = 25 °C
0.2
0
0.1
1
10
100
10
1
0.1
100
1
IF - Forward Current (mA)
Fig. 12 - Normalized CTR (non-saturated) vs. Forward Current
100
Fig. 15 - FCTR vs. Collector Current
1000
1.2
Tamb = 0 °C
VCE = 0.4 V
Normalized to:
IF = 5 mA,
VCE = 5 V,
Tamb = 25 °C
1.0
0.8
VCE = 5 V, IC = 2 mA
ton, toff Switching Time (μs)
NCTR - Normalized CTR (sat)
10
IC (mA)
Tamb = -55
- °C
0.6
0.4
Tamb = 25 °C
0.2
Tamb = 75 °C
Tamb = 100 °C
0
0.1
1
100
toff (μs)
10
1
ton (μs)
0.1
10
100
0
5
10
15
20
RL - Load Resistance (kΩ)
IF - Forward Current (mA)
Fig. 13 - Normalized CTR (saturated) vs. Forward Current
Fig. 16 - Switching Time vs. Load Resistance
0
VCE = 5 V
-20
RL = 100 Ω
Phase Angle (deg)
-40
RL = 1000 Ω
-60
-80
-100
-120
-140
-160
1
10
100
1000
f - Frequency (kHz)
Fig. 14 - FCTR vs. Phase Angle
Rev. 2.7, 20-Aug-2021
Document Number: 83512
6
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TCMT1600, TCMT4600, TCMT4606
www.vishay.com
Vishay Semiconductors
PACKAGE DIMENSIONS in millimeters
4
3
0.2 ± 0.05
4.40 typ.
0.60
Pin One I.D.
+ 0.20
- 0.30
7.00 ± 0.30
Lead coplanarity
0.1 max.
2
Possible footprint
0.4 ± 0.1
1.27 nom.
Rev. 2.7, 20-Aug-2021
0.10 ± 0.10
1.27
0.9
2.85 max.
2.60 ± 0.20
2.00 ± 0.10
1
5.00
7.60
Document Number: 83512
7
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TCMT1600, TCMT4600, TCMT4606
www.vishay.com
Vishay Semiconductors
PACKAGE MARKING
TCMT4600
MT1600
V YWW 68
V YWW 68
PACKAGING INFORMATION (TAPE AND REEL) in millimeters
Top cover tape
Embossed carrier
Embossment
17998
Fig. 17 - Tape and Reel Shipping Medium
2 ± 0.1
0.3 ± 0.05
4 ± 0.1
1.55 ± 0.05
1.75 ± 0.1
Pin 1
7.5 ± 0.1
16 ± 0.3
4.4
7.4 ± 0.1
7.4 ± 0.1
5°
2.2 ± 0.1
2.6 ± 0.1
8 ± 0.1
2.95 ± 0.1
1.6 ± 0.1
Fig. 18 - Tape and Reel Packing (3000 parts per reel)
Rev. 2.7, 20-Aug-2021
Document Number: 83512
8
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TCMT1600, TCMT4600, TCMT4606
www.vishay.com
Vishay Semiconductors
1.75
Ø 1.55
2.6
2
4
0.3
technical drawings
according to DIN
specification
7.5
10.6
16
5°
Ø 1.6
12
7.4
2.2
Direction of pulling out
18427
Fig. 19 - TTape and Reel Packing for TCMT460X (2000 parts per reel)
1.75
Ø 1.55
2.6
4
2
0.3
technical drawings
according to DIN
specification
7.5
16
10.6
5°
Ø 1.6
12
7.4
2.2
Direction of pulling out
18427_1
Fig. 20 - TTape and Reel Packing for TCMT460XT0 (2000 parts per reel)
SOLDER PROFILES
HANDLING AND STORAGE CONDITIONS
ESD level: HBM class 2
Axis Title
10000
300
Floor life: unlimited
Max. 260 °C
255 °C
240 °C
217 °C
2nd line
Temperature (°C)
250
Conditions: Tamb < 30 °C, RH < 85 %
245 °C
Moisture sensitivity level 1, according to J-STD-020
1000
200
1st line
2nd line
Max. 30 s
150
Max. 120 s
100
Max. 100 s
Max. ramp down 6 °C/s
100
Max. ramp up 3 °C/s
50
10
0
0
50
19841-1
100
150
200
250
300
Time (s)
Fig. 21 - Lead (Pb)-free Reflow Solder Profile According to
J-STD-020 for SMD Devices
Rev. 2.7, 20-Aug-2021
Document Number: 83512
9
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jan-2022
1
Document Number: 91000
