TEMD5510FX01

TEMD5510FX01 www.vishay.com Vishay Semiconductors Ambient Light Sensor FEATURES • Package type: surface-mount • Package form: top view • Dimensions (L x W x H in mm): 5 x 4.24 x 1.12 • Radiant sensitive area (in mm2): 7.5 • AEC-Q101 qualified • High photo sensitivity • Adapted to human eye responsivity • Supression filter for near infrared radiation • Angle of half sensitivity: ϕ = ± 65° • Floor life: 72 h, MSL 4, according to J-STD-020 • Lead (Pb)-free reflow soldering • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 DESCRIPTION TEMD5510FX01 ambient light sensor is a PIN photodiode with high photo sensitivity in a miniature surface mount device (SMD). The detector chip has 7.5 mm2 sensitive area. It is sensitive to visible light much like the human eye and has peak sensitivity at 540 nm. APPLICATIONS • Automotive sensors • Ambient light sensors • Backlight dimmers • Notebooks • Computers PRODUCT SUMMARY COMPONENT TEMD5510FX01 Ira (μA) ϕ (°) λ0.5 (nm) 1 ± 65 430 to 610 Note • Test conditions see table “Basic Characteristics” ORDERING INFORMATION ORDERING CODE PACKAGING REMARKS PACKAGE FORM TEMD5510FX01 Tape and reel MOQ: 1500 pcs, 1500 pcs/reel Top view TEMD5510FX01-GS15 Tape and reel MOQ: 5000 pcs, 5000 pcs/reel Top view Note • MOQ: minimum order quantity ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION Reverse voltage Power dissipation Tamb ≤ 25 °C Junction temperature SYMBOL VALUE VR 16 UNIT V PV 215 mW Tj 100 °C Operating temperature range Tamb -40 to +100 °C Storage temperature range Tstg -40 to +110 °C According to reflow solder profile Fig. 5 Tsd 260 °C JESD51 RthJA 350 K/W Soldering temperature Thermal resistance junction-to-ambient Document Number: 81293 1 For technical questions, contact: detectortechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 1.7, 21-May-2019 TEMD5510FX01 www.vishay.com Vishay Semiconductors BASIC CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT Breakdown voltage IR = 100 μA, E = 0 V(BR) 16 - - V Reverse dark current VR = 10 V, E = 0 Iro - 2 30 nA VR = 0 V, f = 1 MHz, E = 0 CD - 1600 - pF VR = 3 V, f = 1 MHz, E = 0 CD - 730 - pF Ee = 1 mW/cm2, λ = 550 nm, VR = 5 V Ira - 26 - μA Ev = 100 lx, CIE illuminant A, VR = 5 V Ira 0.8 1 1.4 μA Ev = 100 lx, CIE illuminant A, VR = 5 V TKIra - 0.2 - %/K Angle of half sensitivity ϕ - ± 65 - ° Wavelength of peak sensitivity λp - 540 - nm λ0.5 - 430 to 610 - nm Diode capacitance Reverse light current Temperature coefficient of Ira Range of spectral bandwidth BASIC CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 1.0 Relative Spectral Sensitivity 100 10 VR = 10 V 0.8 human eye 0.6 0.4 0.2 1 20 40 60 Tamb - Ambient Temperature (°C) 94 8403 0.0 400 100 80 Fig. 1 - Reverse Dark Current vs. Ambient Temperature Photodiode 600 0° 10 CIE Illuminant A VR = 5 V 1 Srel - Relative Sensitivity 100 1000 Fig. 3 - Relative Spectral Sensitivity vs. Wavelength 1000 Ira - Photocurrent (µA) 800 Wavelength (nm) 20047 10 ° 20 ° 30° 40° 1.0 0.9 50° 0.8 60° 70° 0.7 ϕ - Angular Displacement Iro - Reverse Dark Current (nA) 1000 80° 0.1 10 100 1000 0.6 10 000 0.4 0.2 0 94 8406_1 20080 Ev - Illuminance (lx) Fig. 2 - Reverse Light Current vs. Irradiance Fig. 4 - Relative Radiant Sensitivity vs. Angular Displacement Document Number: 81293 2 For technical questions, contact: detectortechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 1.7, 21-May-2019 TEMD5510FX01 www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters Drawing-No.: 6.541-5060.01-4 Issue: 3; 05.02.08 Not indicated tolerances ± 0.1 20536 Document Number: 81293 3 For technical questions, contact: detectortechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 1.7, 21-May-2019 TEMD5510FX01 www.vishay.com Vishay Semiconductors TAPING DIMENSIONS in millimeters 20537 REEL DIMENSIONS in millimeters 20874 Document Number: 81293 4 For technical questions, contact: detectortechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 1.7, 21-May-2019 TEMD5510FX01 www.vishay.com Vishay Semiconductors SOLDER PROFILE DRYPACK Devices are packed in moisture barrier bags (MBB) to prevent the products from moisture absorption during transportation and storage. Each bag contains a desiccant. Axis Title 10000 300 Max. 260 °C 255 °C 240 °C 217 °C 245 °C FLOOR LIFE 1000 200 Max. 30 s 1st line 2nd line 2nd line Temperature (°C) 250 150 Max. 120 s 100 Max. 100 s Max. ramp down 6 °C/s 100 Time between soldering and removing from MBB must not exceed the time indicated in J-STD-020: Moisture sensitivity: level 4 Floor life: 72 h Conditions: Tamb < 30 °C, RH < 60 % Max. ramp up 3 °C/s 50 DRYING 10 0 0 50 100 150 200 250 300 Time (s) 19841 Fig. 5 - Lead (Pb)-free Reflow Solder Profile According to J-STD-020D In case of moisture absorption devices should be baked before soldering. Conditions see J-STD-033D or recommended conditions: 192 h at 40 °C (+ 5 °C), RH < 5 % or 96 h at 60 °C (+ 5 °C), RH < 5 %. Document Number: 81293 5 For technical questions, contact: detectortechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 1.7, 21-May-2019 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000