TFPT0603L1000FV

TFPT www.vishay.com Vishay SMD PTC - Nickel Thin Film Linear Thermistors FEATURES • Alumina substrate base with nickel based PTC thin film element Available • 0402, 0603, 0805, and 1206 sizes available • Available in tape and reel packaging • Standard R25 tolerances: ± 0.5 %, ± 1 %, ± 5 % • Operation range -55 °C to +150 °C Available • High stability over the entire temperature range • cULus recognized, file E148885 (UL category XGPU2 / XGPU8) • AEC-Q200 qualified (grade 1), except TFPT0402 • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 ADDITIONAL RESOURCES Note * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details Design Tools APPLICATIONS Temperature compensation and sensing in • Automotive • Motor drives • Lighting LED drivers • Test and measuring equipment • Air-flow sensor QUICK REFERENCE DATA PARAMETER DESCRIPTION Resistance value at 25 °C (2) Tolerance on R25-value (2) TCR at 25 °C Tolerance on TCR at 25 °C (1) Operating temperature range: at rated power at zero dissipation (4) Dissipation factor  (for information only) (5) Maximum rated power at 70 °C (P70) (5) Maximum working voltage RCWV (3) Climatic category (LCT/UCT/days) Weight Failure rate FITobserved VALUE TFPT0402 5 ± 25 TFPT0603 100 to 1K TFPT0805 100 to 5K ± 0.5; ± 1; ± 5 TFPT1206 100 to 10K 4110 ± 400 1.8 75 30 0.65 2  % ppm/K -55 to +70 -55 to +150 0.8 100 (6) 1.2 UNIT °C 2.3 100 40 4 125 50 5.5 10 55/150/56 mW/K mW V mg  0.1 x 10-9/h Notes (1) Contact Vishay if closer TCR lot tolerance is desired (2) Other R -values and tolerances are available upon request 25 (3) Rated continuous working voltage is maximum working voltage or P 70 x R whichever is less (4) Zero power or zero dissipation is considered as measuring power max. 1 % of rated power P 70 (5) Please refer to APPLICATION INFORMATION (6) Power levels are depending on way of mounting and substrates used. Higher power up to 200 mW at 25 °C (P ) can be tolerated on uniform 25 layer TFPT0402 5R APPLICATION INFORMATION When the resistor dissipates power, a temperature rise above the ambient temperature occurs, dependent on the thermal resistance of the assembled resistor together with the printed circuit board. The rated dissipation applies only if the permitted film temperature of 150 °C is not exceeded. Please consider the application note “Thermal Management in Surface-Mounted Resistor Applications” (www.vishay.com/doc?28844) for information on the general nature of thermal resistance. The TFPT0402 uniform layer linear thermistor with low resistance value can be used as an air-flow sensor in a controlled power mode where nickel film temperature changes can be related to air-flow speed. Revision: 14-Jan-2020 Document Number: 33017 1 For technical questions, contact: nlr@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TFPT www.vishay.com Vishay STANDARD RESISTANCE VALUES at 25 °C in  100 120 150 180 220 270 330 390 470 560 680 820 1.0K 1.2K 1.5K Note • Rated continuous working voltage is maximum working voltage or 1.8K 2.2K 2.7K 3.3K 3.9K 4.7K 5.0K 5.6K 6.8K 8.2K 10.0K P 70 x R whichever is less GLOBAL PART NUMBER INFORMATION Global Part Numbering: TFPT1206L1002FM (preferred part number format) T F P T 1 2 0 6 L 1 0 0 2 F M GLOBAL MODEL CHARACTERISTIC RESISTANCE VALUE TOLERANCE CODE PACKAGING TFPT0402 TFPT0603 TFPT0805 TFPT1206 L = linear U = uniform linear (0402) 1002 = 10K 0050 = 5R (0402) D = ± 0.5 % F=±1% J=±5% V = ± 25 % (0402) L = lead (Pb)-free, T/R (10 000 pcs) 0402 M = lead (Pb)-free, T/R (5000 pcs) V = lead (Pb)-free, T/R (1000 pcs) DIMENSIONS in millimeters Z = tin / lead, T/R (5000 pcs) Y = tin / lead, T/R (1000 pcs) CONSTRUCTION A Overcoating D Thermistor C B E PART NUMBER TFPT 0402 TFPT 0603 TFPT 0805 TFPT 1206 A 1.00 ± 0.05 1.55 ± 0.10 2.00 ± 0.15 3.05 ± 0.15 B 0.50 ± 0.05 0.80 ± 0.10 1.25 ± 0.15 1.50 ± 0.15 C 0.35 ± 0.07 0.45 ± 0.10 0.45 ± 0.10 0.55 ± 0.10 D 0.20 ± 0.10 0.30 ± 0.20 0.40 ± 0.20 0.50 ± 0.25 Alumina substrate E 0.20 ± 0.10 0.30 ± 0.20 0.40 ± 0.20 0.50 ± 0.25 Inner electrode Nickel barrier Solderable coating TESTS AND REQUIREMENTS (except TFPT0402) TEST High temperature exposure (storage) Temperature cycling Biased humidity Operational life Mechanical shock and vibration Resistance to soldering heat ESD (2) Board flex Terminal strength CONDITIONS (1) AEC-Q200, 1000 h at 150 °C AEC-Q200, 1000 cycles -55 °C / +125 °C 1000 h, 1 mA biased at 85 °C / 85 % RH 1000 h, 1 mA biased at 40 °C / 95 % RH 1000 h, P70 max biased at 85 °C MIL-STD 202, method 213 - 204 MIL-STD 202, method 210, solder bath dipping 10 s at 260°C AEC-Q200-002, HBM (CD) 0.5 kV (0603), 1.0 kV (0805), 1.0 kV (1206) AEC-Q200-005, 2 mm during 60 s AEC-Q200-006, shear test 17.7 N during 60 s REQUIREMENTS MAX. |R25/R25| 0.25 % 0.25 % 0.25 % 0.25 % 0.25 % 0.50 % 0.25 % 0.25 % 0.25 % 0.25 % Notes (1) Environmental performance specifications use test procedures as outlined in MIL-R23648D, MIL-STD 202 and AEC-Q200 (2) TFPTs are ESD sensitive Revision: 14-Jan-2020 Document Number: 33017 2 For technical questions, contact: nlr@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TFPT www.vishay.com Vishay AGENCY APPROVALS (except TFPT0402) • cUL certificate • ULus certificate Note • Agency approval documents, please see: www.vishay.com/ppg?33017&documents AVERAGE RATIO R/R25 TFPT ALL SIZES AND VALUES TEMP. R/R25 TEMP. R/R25 TEMP. R/R25 TEMP. R/R25 TEMP. R/R25 TEMP. R/R25 -20 0.825 20 0.980 60 1.150 100 1.337 140 1.541 -19 0.828 21 0.984 61 1.155 101 1.342 141 1.547 -18 0.832 22 0.988 62 1.159 102 1.347 142 1.552 -17 0.836 23 0.992 63 1.164 103 1.352 143 1.557 -16 0.839 24 0.996 64 1.168 104 1.357 144 1.563 -55 0.702 -15 0.843 25 1.000 65 1.173 105 1.362 145 1.568 -54 0.705 -14 0.847 26 1.004 66 1.177 106 1.367 146 1.574 -53 0.708 -13 0.851 27 1.008 67 1.182 107 1.372 147 1.579 -52 0.712 -12 0.854 28 1.012 68 1.186 108 1.377 148 1.584 -51 0.715 -11 0.858 29 1.017 69 1.191 109 1.382 149 1.590 -50 0.719 -10 0.862 30 1.021 70 1.196 110 1.387 150 1.595 -49 0.722 -9 0.866 31 1.025 71 1.200 111 1.392 -48 0.725 -8 0.869 32 1.029 72 1.205 112 1.397 -47 0.729 -7 0.873 33 1.033 73 1.209 113 1.402 -46 0.732 -6 0.877 34 1.037 74 1.214 114 1.407 -45 0.736 -5 0.881 35 1.042 75 1.219 115 1.412 -44 0.739 -4 0.885 36 1.046 76 1.223 116 1.417 -43 0.743 -3 0.889 37 1.050 77 1.228 117 1.422 -42 0.746 -2 0.892 38 1.054 78 1.232 118 1.427 -41 0.749 -1 0.896 39 1.059 79 1.237 119 1.432 -40 0.753 0 0.900 40 1.063 80 1.242 120 1.437 -39 0.756 1 0.904 41 1.067 81 1.246 121 1.442 -38 0.760 2 0.908 42 1.071 82 1.251 122 1.448 -37 0.763 3 0.912 43 1.076 83 1.256 123 1.453 -36 0.767 4 0.916 44 1.080 84 1.261 124 1.458 -35 0.771 5 0.920 45 1.084 85 1.265 125 1.463 -34 0.774 6 0.924 46 1.089 86 1.270 126 1.468 -33 0.778 7 0.927 47 1.093 87 1.275 127 1.473 -32 0.781 8 0.931 48 1.097 88 1.280 128 1.478 -31 0.785 9 0.935 49 1.102 89 1.284 129 1.484 -30 0.788 10 0.939 50 1.106 90 1.289 130 1.489 -29 0.792 11 0.943 51 1.110 91 1.294 131 1.494 -28 0.796 12 0.947 52 1.115 92 1.299 132 1.499 -27 0.799 13 0.951 53 1.119 93 1.303 133 1.505 -26 0.803 14 0.955 54 1.124 94 1.308 134 1.510 -25 0.806 15 0.959 55 1.128 95 1.313 135 1.515 -24 0.810 16 0.963 56 1.133 96 1.318 136 1.520 -23 0.814 17 0.967 57 1.137 97 1.323 137 1.526 -22 0.817 18 0.971 58 1.141 98 1.328 138 1.531 -21 0.821 19 0.975 59 1.146 99 1.333 139 1.536 Revision: 14-Jan-2020 Document Number: 33017 3 For technical questions, contact: nlr@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TFPT www.vishay.com Vishay RATIO FORMULA RT = R25 x (9.0014 x 10-1 + 3.87235 x 10-3 (°C)-1 x T + 4.86825 x 10-6 (°C)-2 x T2 + 1.37559 x 10-9 (°C)-3 x T3) T(°C) = 28.54 x (RT/R25)3 - 158.5 x (RT/R25)2 + 474.8 x (RT/R25) - 319.85)  RATIO TOLERANCE EXAMPLES: RATIO TOLERANCES LOW TEMP. HIGH TEMP. TOL. -55 °C +150 °C ±4% -40 °C +125 °C ±3% -20 °C +85 °C ±2% 0 °C +55 °C ±1% +12 °C +40 °C ± 0.5 % At 40 °C, ratio = 1.063 ± 0.5 % (0.005) so, ratio = 1.058 to 1.068 At 125 °C, ratio = 1.460 ± 3 % (0.044) so, ratio = 1.416 to 1.504 At intermediate temperatures, the ratios can be gradually adapted, for example at 105 °C the ratio tolerance will be ± 2.5 %. For total resistance tolerance, the specific R25 tolerance needs to be multiplied with the ratio tolerance, for example a 100R 1 % at 25 °C will have a maximum resistance at 125 °C of 100R x 1.463 x 1.03 x 1.01 = 152.2 . RATIO RT/R25 TCR TYPICAL VALUE Axis Title Axis Title 1.7 4800 10000 4600 Max. 1.5 4500 1st line 2nd line 1000 1.2 1.1 1.0 100 4400 4200 4100 4000 0.9 3900 0.8 3800 0.7 1000 4300 1st line 2nd line Min. 1.3 2nd line TCR (ppm/K) 1.4 2nd line Ratio 10000 4700 1.6 100 3700 10 0.6 -75 -50 -25 0 25 50 10 3600 75 100 125 150 -75 -50 -25 Temperature (°C) 0 25 50 75 100 125 150 175 Temperature (°C) POWER DERATING Axis Title 110 10000 100 90 1000 70 1st line 2nd line 2nd line Power of P70 (%) 80 60 50 40 100 30 20 10 10 0 -75 -50 -25 0 25 50 75 100 125 150 175 Temperature (°C) Note • Zero power is considered as measuring power max. 1 % of rated power P70 Revision: 14-Jan-2020 Document Number: 33017 4 For technical questions, contact: nlr@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000