TH3C226K016F1000

TH3 www.vishay.com Vishay Sprague Solid Tantalum Surface Mount Capacitors TANTAMOUNT™ Molded Case, HI-TMP® High Temperature 150 °C, Automotive Grade FEATURES • Operating temperature up to 150 °C with 50 % voltage derating • AEC-Q200 qualified • 100 % surge current tested Available (B, C, D, E case sizes) Available • RoHS-compliant terminations available: matte tin (all cases), gold (A, C, D, and E cases) • Standard EIA 535BAAC case size (A through E) • Compliant terminations Available • Moisture sensitivity level 1 • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 LINKS TO ADDITIONAL RESOURCES 3D 3D 3D Models Calculators Related Documents Infographics Did You Know? Technical Notes Note * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details APPLICATIONS PERFORMANCE / ELECTRICAL CHARACTERISTICS • Automotive • Industrial • High temperature sensors www.vishay.com/doc?40215 Operating Temperature: -55 °C to +150 °C Capacitance Range: 0.33 μF to 220 μF Capacitance Tolerance: ± 10 %, ± 20 % Voltage Rating: 6.3 VDC to 50 VDC Note • For recommended voltage derating guidelines see “Typical Performance Characteristics” ORDERING INFORMATION TH3 D 106 K 035 C 0700 TYPE CASE CODE CAPACITANCE CAPACITANCE TOLERANCE DC VOLTAGE RATING AT +85 °C TERMINATION AND PACKAGING ESR See Ratings and Case Codes table. This is expressed in picofarads. The first two digits are the significant figures. The third is the number of zeros to follow. K = ± 10 % M = ± 20 % This is expressed in V. To complete the three-digit block, zeros precede the voltage rating. A decimal point is indicated by an “R”. (6R3 = 6.3 V) Gold A = 7" (178 mm) reel B = 13" (330 mm) reel Maximum 100 kHz ESR 0500 = 500 mΩ 5000 = 5.0 Ω 10R0 = 10.0 Ω Matte tin C = 7" (178 mm) reel D = 13" (330 mm) reel V = 7" (178 mm) reel, dry pack U = 13" (330 mm) reel, dry pack Tin / lead E = 7" (178 mm) reel F = 13" (330 mm) reel T = 7" (178 mm) reel, dry pack W = 13" (330 mm) reel, dry pack Notes • We reserve the right to supply higher voltage ratings and tighter capacitance tolerance capacitors in the same case size. Voltage substitutions will be marked with the higher voltage rating • Dry pack as specified in J-STD-033 Revision: 17-Oct-2022 Document Number: 40084 1 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TH3 www.vishay.com Vishay Sprague DIMENSIONS in inches [millimeters] L W H TW Glue Pad TH (MIN.) P Glue Pad CASE CODE EIA SIZE L W H P TW TH (MIN.) A 3216-18 B 3528-21 C 6032-28 D 7343-31 E 7343-43 0.126 ± 0.008 [3.2 ± 0.20] 0.138 ± 0.008 [3.5 ± 0.20] 0.236 ± 0.012 [6.0 ± 0.30] 0.287 ± 0.012 [7.3 ± 0.30] 0.287 ± 0.012 [7.3 ± 0.30] 0.063 ± 0.008 [1.6 ± 0.20] 0.110 ± 0.008 [2.8 ± 0.20] 0.126 ± 0.012 [3.2 ± 0.30] 0.169 ± 0.012 [4.3 ± 0.30] 0.169 ± 0.012 [4.3 ± 0.30] 0.063 ± 0.008 [1.6 ± 0.20] 0.075 ± 0.008 [1.9 ± 0.20] 0.098 ± 0.012 [2.5 ± 0.30] 0.110 ± 0.012 [2.8 ± 0.30] 0.157 ± 0.012 [4.0 ± 0.30] 0.031 ± 0.012 [0.80 ± 0.30] 0.031 ± 0.012 [0.80 ± 0.30] 0.051 ± 0.012 [1.3 ± 0.30] 0.051 ± 0.012 [1.3 ± 0.30] 0.051 ± 0.012 [1.3 ± 0.30] 0.047 ± 0.004 [1.2 ± 0.10] 0.087 ± 0.004 [2.2 ± 0.10] 0.087 ± 0.004 [2.2 ± 0.10] 0.094 ± 0.004 [2.4 ± 0.10] 0.094 ± 0.004 [2.4 ± 0.10] 0.028 [0.70] 0.028 [0.70] 0.039 [1.0] 0.039 [1.0] 0.039 [1.0] 35 V A (11.0) 50 V C (3.3) Note • Glue pad (non-conductive, part of molded case) is dedicated for glue attachment (as user option) RATINGS AND CASE CODES μF 0.33 0.47 0.68 6.3 V 10 V 16 V 20 V 25 V A (14.0) 1.0 1.5 2.2 A (4.6) 3.3 A (6.5) A (5.9) A (3.0, 5.2) / B (5.0) A (6.6) / B (4.4) A (4.3) A (5.9) / B (3.5) A (5.2) / B (3.0) A (3.4) / B (3.0) B (2.7) / C (3.7) B (3.0) / C (2.0) B (4.2) / C (3.3) B (2.5) / C (2.2) B (2.5, 3.5) / C (1.7) A (5.0) / B (2.9, 1.9) / C (1.7) 4.7 A (2.9) / B (2.7) A (2.9) / B (2.1) 6.8 A (2.6) A (2.6, 2.0) / B (1.8) / C (1.7) A (3.4, 2.0) / B (1.8) / C (1.8, 1.7) A (2.9, 2.0) / B (2.0, 1.8, 1.5) / C (1.8, 1.4) B (2.0) / C (1.4, 0.8) 10 A (3.4, 2.7) 15 B (1.8) 22 B (2.0, 1.5) 33 B (1.9, 1.7) 47 B (1.8) / C (0.8) 68 B (1.8) 100 E (0.3) 150 220 B (1.5) / C (1.5, 1.1) B (1.9, 1.4) / D (0.8) B (1.8) / C (0.8, 0.5) / D (0.6) C (1.0, 0.8) / D (1.0, 0.6, 0.4) C (0.9, 0.5) / D (0.6) D (0.6) E (0.5) D (1.7) A (5.0) / B (2.8) / B (3.1) / C (1.3) / C (1.5) / D (0.9) C (1.6) D (1.0) B (2.4) / C (1.4) C (1.8) / D (0.9) D (0.9) C (1.1) / D (0.9) C (1.6) / D (0.25, 0.3, 0.7) D (0.8) / E (0.5) B (1.4, 2.0) / C (1.2) / D (0.7) D (0.7) C (1.0) / D (0.7) D (0.6) D (0.3, 0.6) / E (0.5) D (0.6) D (0.5) C (0.8, 0.6) / D (0.6) D (0.7) / E (0.6) E (0.6) D (0.6) E (0.6) C (1.1) B (2.0) / C (1.0) B (2.0) / C (1.0) / D (0.9) B (1.9) / C (0.8, 1.0) / D (0.8) C (0.9, 0.6) / D (0.6) D (0.6) / E (0.6, 0.15) Note • ESR limits in Ω are shown in parenthesis Revision: 17-Oct-2022 Document Number: 40084 2 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TH3 www.vishay.com Vishay Sprague MARKING “A” CASE VOLTAGE CODE Capacitance code, pF Indicates high temperature Date code designation V 104H Voltage code Polarity band (+) A Case VOLTS CODE 4.0 G 6.3 J 10 A 16 C 20 D 25 E 35 V 50 T Indicates high temperature Voltage Capacitance, μF 22 Polarity band (+) XX Date code H10 2 Vishay marking B, C, D, E Case Marking Capacitor marking includes an anode (+) polarity band, capacitance in microfarads and the voltage rating. “A” case capacitors use a letter code for the voltage and EIA capacitance code. The Vishay identification marking is included if space permits. Vishay marking (“circled 2”) may show additives in the form of short lines, depicting actual manufacturing facility. For A case capacitors discontinuation in polarity bar maybe used as actual manufacturing facility designation. Capacitors rated at 6.3 V are marked 6 V. Uppercase letter “H” indicates lead (Pb)-free capacitors; lowercase letter “h” indicates SnPb containing capacitors. A manufacturing date code is marked on all capacitors. for details see FAQ: www.vishay.com/doc?40110. Call the factory for further explanation. STANDARD RATINGS CAPACITANCE (μF) CASE CODE 10 10 15 22 22 33 33 47 47 68 100 A A B B B B B B C B E 2.2 4.7 4.7 6.8 10 10 10 10 10 15 15 15 15 15 15 15 A A B A A A B C C A A B B B C C PART NUMBER MAX. DCL AT +25 °C (μA) MAX. DF AT +25 °C (%) 6.3 VDC AT +85 °C; 4 VDC AT +125 °C; 3.15 VDC AT +150 °C TH3A106(1)6R3(3)3400 0.6 6 TH3A106(1)6R3(3)2700 0.6 6 TH3B156(1)6R3(2)1800 0.9 6 TH3B226(1)6R3(2)2000 1.3 6 TH3B226(1)6R3(2)1500 1.3 6 TH3B336(1)6R3(2)1900 2.0 6 TH3B336(1)6R3(2)1700 2.0 6 TH3B476(1)6R3(2)1800 2.8 8 TH3C476(1)6R3(3)0800 2.8 6 TH3B686(1)6R3(2)1800 4.1 6 TH3E107(1)6R3(3)0300 6.0 6 10 VDC AT +85 °C; 7 VDC AT +125 °C; 5 VDC AT +150 °C TH3A225(1)010(3)4600 0.5 6 TH3A475(1)010(3)2900 0.5 6 TH3B475(1)010(2)2700 0.5 6 TH3A685(1)010(3)2600 6.8 6 TH3A106(1)010(3)3400 1.0 6 TH3A106(1)010(3)2000 1.0 6 TH3B106(1)010(2)1800 1.0 6 TH3C106(1)010(3)1800 1.0 6 TH3C106(1)010(3)1700 1.0 6 TH3A156(1)010(3)2900 1.0 6 TH3A156(1)010(3)2000 1.0 6 TH3B156(1)010(2)2000 1.0 6 TH3B156(1)010(2)1800 1.0 6 TH3B156(1)010(2)1500 1.0 6 TH3C156(1)010(3)1800 1.0 6 TH3C156(1)010(3)1400 1.0 6 MAX. ESR AT +25 °C 100 kHz (Ω) MAX. RIPPLE 100 kHz IRMS (A) 3.40 2.70 1.80 2.00 1.50 1.90 1.70 1.80 0.80 1.80 0.30 0.15 0.17 0.22 0.21 0.24 0.21 0.22 0.22 0.37 0.22 0.74 4.60 2.90 2.70 2.60 3.40 2.00 1.80 1.80 1.70 2.90 2.00 2.00 1.80 1.50 1.80 1.40 0.13 0.16 0.18 0.17 0.15 0.19 0.22 0.25 0.25 0.16 0.19 0.21 0.22 0.24 0.25 0.28 Note • Part number definitions: (1) Capacitance tolerance: K, M (2) Termination and packaging: C, D, E, F, V, U, T, W (3) Termination and packaging: A, B, C, D, E, F, V, U, T, W Revision: 17-Oct-2022 Document Number: 40084 3 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TH3 www.vishay.com Vishay Sprague STANDARD RATINGS CAPACITANCE (μF) CASE CODE 22 22 22 33 33 33 47 47 47 47 68 68 68 68 68 100 100 100 150 220 B C C B B D B C C D C C D D D C C D D E 1.0 2.2 3.3 3.3 4.7 4.7 6.8 6.8 6.8 6.8 10 10 10 15 15 22 22 22 22 33 33 33 47 47 47 68 100 100 100 A A A B A B A A B C B C C B C B C C D C C D C C D D D E E PART NUMBER MAX. DCL AT +25 °C (μA) MAX. DF AT +25 °C (%) 10 VDC AT +85 °C; 7 VDC AT +125 °C; 5 VDC AT +150 °C TH3B226(1)010(2)1500 2.2 6 TH3C226(1)010(3)1500 2.2 6 TH3C226(1)010(3)1100 2.2 6 TH3B336(1)010(2)1900 3.3 6 TH3B336(1)010(2)1400 3.3 6 TH3D336(1)010(3)0800 3.3 6 TH3B476(1)010(2)1800 4.7 6 TH3C476(1)010(3)0800 4.7 6 TH3C476(1)010(3)0500 4.7 6 TH3D476(1)010(3)0600 4.7 6 TH3C686(1)010(3)1000 6.8 8 TH3C686(1)010(3)0800 6.8 8 TH3D686(1)010(3)1000 6.8 6 TH3D686(1)010(3)0600 6.8 6 TH3D686(1)010(3)0400 6.8 6 TH3C107(1)010(3)0900 10.0 6 TH3C107(1)010(3)0500 10.0 6 TH3D107(1)010(3)0600 10.0 8 TH3D157(1)010(3)0600 15.0 8 TH3E227(1)010(3)0500 22.0 8 16 VDC AT +85 °C; 10 VDC AT +125 °C; 8 VDC AT +150 °C TH3A105(1)016(3)6500 0.5 4 TH3A225(1)016(3)4300 0.5 6 TH3A335(1)016(3)3400 0.5 6 TH3B335(1)016(2)3000 0.5 6 TH3A475(1)016(3)2900 0.8 6 TH3B475(1)016(2)2100 0.8 6 TH3A685(1)016(3)2600 1.1 6 TH3A685(1)016(3)2000 1.1 6 TH3B685(1)016(2)1800 1.1 6 TH3C685(1)016(3)1700 1.1 6 TH3B106(1)016(2)2000 1.6 6 TH3C106(1)016(3)1400 1.6 6 TH3C106(1)016(3)0800 1.6 6 TH3B156(1)016(2)2000 2.4 6 TH3C156(1)016(3)1000 2.4 6 TH3B226(1)016(2)1900 3.5 6 TH3C226(1)016(3)1000 3.5 6 TH3C226(1)016(3)0800 3.5 4.5 TH3D226(1)016(3)0800 3.5 6 TH3C336(1)016(3)0900 5.3 6 TH3C336(1)016(3)0600 5.3 6 TH3D336(1)016(3)0600 5.3 6 TH3C476(1)016(3)0800 7.5 6 TH3C476(1)016(3)0600 7.5 6 TH3D476(1)016(3)0600 7.5 6 TH3D686(1)016(3)0600 10.9 6 TH3D107(1)016(3)0600 16.0 8 TH3E107(1)016(3)0600 16.0 8 TH3E107(1)016(3)0150 16.0 8 MAX. ESR AT +25 °C 100 kHz (Ω) MAX. RIPPLE 100 kHz IRMS (A) 1.50 1.50 1.10 1.90 1.40 0.80 1.80 0.80 0.50 0.60 1.00 0.80 1.00 0.60 0.40 0.90 0.50 0.60 0.60 0.50 0.24 0.27 0.32 0.21 0.25 0.43 0.22 0.37 0.47 0.50 0.33 0.37 0.39 0.50 0.61 0.35 0.47 0.50 0.50 0.61 6.50 4.30 3.40 3.00 2.90 2.10 2.60 2.00 1.80 1.70 2.00 1.40 0.80 2.00 1.00 1.90 1.00 0.80 0.80 0.90 0.60 0.60 0.80 0.60 0.60 0.60 0.60 0.60 0.15 0.11 0.13 0.15 0.17 0.16 0.2 0.17 0.19 0.22 0.25 0.21 0.28 0.37 0.21 0.33 0.21 0.33 0.37 0.43 0.35 0.43 0.50 0.37 0.43 0.43 0.50 0.50 0.56 1.11 Note • Part number definitions: (1) Capacitance tolerance: K, M (2) Termination and packaging: C, D, E, F, V, U, T, W (3) Termination and packaging: A, B, C, D, E, F, V, U, T, W Revision: 17-Oct-2022 Document Number: 40084 4 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TH3 www.vishay.com Vishay Sprague STANDARD RATINGS MAX. ESR AT +25 °C 100 kHz (Ω) MAX. RIPPLE 100 kHz IRMS (A) 4 5.90 0.11 6 5.90 0.11 0.5 6 3.50 0.16 0.7 6 2.70 0.18 MAX. DCL AT +25 °C (μA) MAX. DF AT +25 °C (%) CAPACITANCE (μF) CASE CODE 1.0 A TH3A105(1)020(3)5900 0.5 2.2 A TH3A225(1)020(3)5900 0.5 2.2 B TH3B225(1)020(2)3500 3.3 B TH3B335(1)020(2)2700 3.3 C TH3C335(1)020(3)2700 0.7 6 2.70 0.20 4.7 A TH3A475(1)020(3)5000 0.9 6 5.00 0.12 4.7 B TH3B475(1)020(2)2900 0.9 6 2.90 0.17 4.7 B TH3B475(1)020(2)1900 0.9 6 1.90 0.21 4.7 C TH3C475(1)020(3)1700 0.9 6 1.70 0.25 10 C TH3C106(1)020(3)1100 2.0 6 1.10 0.32 15 B TH3B156(1)020(2)2000 3.0 6 2.00 0.21 15 C TH3C156(1)020(3)1000 3.0 6 1.00 0.33 0.41 PART NUMBER 20 VDC AT +85 °C; 13 VDC AT +125 °C; 10 VDC AT +150 °C 15 D TH3D156(1)020(3)0900 3.0 6 0.90 22 C TH3C226(1)020(3)1000 4.4 6 1.00 0.33 22 D TH3D226(1)020(3)0700 4.4 6 0.70 0.46 33 D TH3D336(1)020(3)0600 6.6 6 0.60 0.5 47 D TH3D476(1)020(3)0700 9.4 6 0.70 0.46 47 E TH3E476(1)020(3)0600 9.4 8 0.60 0.56 68 E TH3E686(1)020(3)0600 13.6 8 0.60 0.56 25 VDC AT +85 °C; 17 VDC AT +125 °C; 12.5 VDC AT +150 °C 0.47 A TH3A474(1)025(3)14R0 0.5 4 14.00 0.073 1.0 A TH3A105(1)025(3)5200 0.5 4 5.20 0.12 1.0 A TH3A105(1)025(3)3000 0.5 4 3.00 0.16 1.0 B TH3B105(1)025(2)5000 0.5 4 5.00 0.13 2.2 A TH3A225(1)025(3)5200 0.6 6 5.20 0.12 2.2 B TH3B225(1)025(2)3000 0.6 6 3.00 0.17 3.3 B TH3B335(1)025(2)3000 0.8 6 3.00 0.17 3.3 C TH3C335(1)025(3)2000 0.8 6 2.00 0.23 0.12 4.7 A TH3A475(1)025(3)5000 1.2 6 5.00 4.7 B TH3B475(1)025(2)2800 1.2 6 2.80 0.17 4.7 C TH3C475(1)025(3)1600 1.2 6 1.60 0.26 6.8 B TH3B685(1)025(2)2400 1.7 6 2.40 0.19 6.8 C TH3C685(1)025(3)1400 1.7 6 1.40 0.28 10 C TH3C106(1)025(3)1100 2.5 6 1.10 0.32 10 D TH3D106(1)025(3)0900 2.5 6 0.90 0.41 15 B TH3B156(1)025(2)2000 3.8 6 2.00 0.21 15 B TH3B156(1)025(2)1400 3.8 6 1.40 0.25 15 C TH3C156(1)025(3)1200 3.8 6 1.20 0.30 15 D TH3D156(1)025(3)0700 3.8 6 0.70 0.46 22 D TH3D226(1)025(3)0600 5.5 6 0.60 0.50 33 D TH3D336(1)025(3)0500 8.3 6 0.50 0.55 47 E TH3E476(1)025(3)0600 11.8 6 0.60 0.56 Note • Part number definitions: (1) Capacitance tolerance: K, M (2) Termination and packaging: C, D, E, F, V, U, T, W (3) Termination and packaging: A, B, C, D, E, F, V, U, T, W Revision: 17-Oct-2022 Document Number: 40084 5 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TH3 www.vishay.com Vishay Sprague STANDARD RATINGS MAX. DCL AT +25 °C (μA) MAX. DF AT +25 °C (%) MAX. ESR AT +25 °C 100 kHz (Ω) MAX. RIPPLE 100 kHz IRMS (A) CAPACITANCE (μF) CASE CODE 0.33 A TH3A334(1)035(3)11R0 0.5 4 11.00 0.08 1.0 A TH3A105(1)035(3)6600 0.5 4 6.60 0.11 1.0 B TH3B105(1)035(2)4400 0.5 4 4.40 0.14 1.5 B TH3B155(1)035(2)4200 0.5 6 4.20 0.14 1.5 C TH3C155(1)035(3)3300 0.5 6 3.30 0.18 2.2 B TH3B225(1)035(2)2500 0.8 6 2.50 0.18 2.2 C TH3C225(1)035(3)2200 0.8 6 2.20 0.22 3.3 B TH3B335(1)035(2)3500 1.2 6 3.50 0.16 3.3 B TH3B335(1)035(2)2500 1.2 6 2.50 0.18 3.3 C TH3C335(1)035(3)1700 1.2 6 1.70 0.25 PART NUMBER 35 VDC AT +85 °C; 23 VDC AT +125 °C; 17.5 VDC AT +150 °C 4.7 B TH3B475(1)035(2)3100 1.7 6 3.10 0.17 4.7 C TH3C475(1)035(3)1300 1.6 6 1.30 0.29 0.39 4.7 D TH3D475(1)035(3)1000 1.6 6 1.00 6.8 C TH3C685(1)035(3)1800 2.4 6 1.80 0.25 6.8 D TH3D685(1)035(3)0900 2.4 6 0.90 0.41 10 C TH3C106(1)035(3)1600 3.5 6 1.60 0.26 10 D TH3D106(1)035(3)0700 3.5 6 0.70 0.46 10 D TH3D106(1)035(3)0300 3.5 6 0.30 0.71 10 D TH3D106(1)035(3)0250 3.5 6 0.25 0.77 15 D TH3D156(1)035(3)0700 5.3 6 0.70 0.46 22 D TH3D226(1)035(3)0600 7.7 6 0.60 0.50 22 D TH3D226(1)035(3)0300 7.7 6 0.30 0.71 22 E TH3E226(1)035(3)0500 7.7 6 0.50 0.61 50 VDC AT +85 °C; 33 VDC AT +125 °C; 25 VDC AT +150 °C 1.0 C TH3C105(1)050(3)3300 0.5 4 3.30 0.18 3.3 D TH3D335(1)050(3)1700 1.7 6 1.70 0.30 4.7 C TH3C475(1)050(3)1500 2.4 6 1.50 0.27 4.7 D TH3D475(1)050(3)0900 2.4 6 0.90 0.41 6.8 D TH3D685(1)050(3)0900 3.4 6 0.90 0.41 10 D TH3D106(1)050(3)0800 5.0 6 0.80 0.43 10 E TH3E106(1)050(3)0500 5.0 6 0.50 0.61 Note • Part number definitions: (1) Capacitance tolerance: K, M (2) Termination and packaging: C, D, E, F, V, U, T, W (3) Termination and packaging: A, B, C, D, E, F, V, U, T, W POWER DISSIPATION CASE CODE MAXIMUM PERMISSIBLE POWER DISSIPATION AT +25 °C (W) IN FREE AIR A 0.075 Revision: 17-Oct-2022 B 0.085 C 0.110 D 0.150 E 0.165 Document Number: 40084 6 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TH3 www.vishay.com Vishay Sprague STANDARD PACKAGING QUANTITY CASE CODE UNITS PER REEL 7" REEL 13" REEL A 2000 9000 B 2000 8000 C 500 3000 D 500 2500 E 400 1500 PRODUCT INFORMATION Guide for Molded Tantalum Capacitors Pad Dimensions www.vishay.com/doc?40074 Package Dimensions Moisture Sensitivity (MSL) www.vishay.com/doc?40135 SELECTOR GUIDES Solid Tantalum Selector Guide www.vishay.com/doc?49053 Solid Tantalum Chip Capacitors www.vishay.com/doc?40091 FAQ Frequently Asked Questions Revision: 17-Oct-2022 www.vishay.com/doc?40110 Document Number: 40084 7 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Molded Guide www.vishay.com Vishay Sprague Guide for Molded Tantalum Capacitors INTRODUCTION Tantalum electrolytic capacitors are the preferred choice in applications where volumetric efficiency, stable electrical parameters, high reliability, and long service life are primary considerations. The stability and resistance to elevated temperatures of the tantalum / tantalum oxide / manganese dioxide system make solid tantalum capacitors an appropriate choice for today's surface-mount assembly technology. Vishay Sprague has been a pioneer and leader in this field, producing a large variety of tantalum capacitor types for consumer, industrial, automotive, military, and aerospace electronic applications. Tantalum is not found in its pure state. Rather, it is commonly found in a number of oxide minerals, often in combination with Columbium ore. This combination is known as “tantalite” when its contents are more than one-half tantalum. Important sources of tantalite include Australia, Brazil, Canada, China, and several African countries. Synthetic tantalite concentrates produced from tin slags in Thailand, Malaysia, and Brazil are also a significant raw material for tantalum production. Electronic applications, and particularly capacitors, consume the largest share of world tantalum production. Other important applications for tantalum include cutting tools (tantalum carbide), high temperature super alloys, chemical processing equipment, medical implants, and military ordnance. Vishay Sprague is a major user of tantalum materials in the form of powder and wire for capacitor elements and rod and sheet for high temperature vacuum processing. THE BASICS OF TANTALUM CAPACITORS Most metals form crystalline oxides which are non-protecting, such as rust on iron or black oxide on copper. A few metals form dense, stable, tightly adhering, electrically insulating oxides. These are the so-called “valve”metals and include titanium, zirconium, niobium, tantalum, hafnium, and aluminum. Only a few of these permit the accurate control of oxide thickness by electrochemical means. Of these, the most valuable for the electronics industry are aluminum and tantalum. Capacitors are basic to all kinds of electrical equipment, from radios and television sets to missile controls and automobile ignitions. Their function is to store an electrical charge for later use. Capacitors consist of two conducting surfaces, usually metal plates, whose function is to conduct electricity. They are separated by an insulating material or dielectric. The dielectric used in all tantalum electrolytic capacitors is tantalum pentoxide. Tantalum pentoxide compound possesses high-dielectric strength and a high-dielectric constant. As capacitors are being manufactured, a film of tantalum pentoxide is applied to their electrodes by means of an electrolytic process. The film is applied in various thicknesses and at various voltages and although transparent to begin with, it takes on different colors as light refracts through it. This coloring occurs on the tantalum electrodes of all types of tantalum capacitors. Revision: 08-Mar-2023 Rating for rating, tantalum capacitors tend to have as much as three times better capacitance / volume efficiency than aluminum electrolytic capacitors. An approximation of the capacitance / volume efficiency of other types of capacitors may be inferred from the following table, which shows the dielectric constant ranges of the various materials used in each type. Note that tantalum pentoxide has a dielectric constant of 26, some three times greater than that of aluminum oxide. This, in addition to the fact that extremely thin films can be deposited during the electrolytic process mentioned earlier, makes the tantalum capacitor extremely efficient with respect to the number of microfarads available per unit volume. The capacitance of any capacitor is determined by the surface area of the two conducting plates, the distance between the plates, and the dielectric constant of the insulating material between the plates. COMPARISON OF CAPACITOR DIELECTRIC CONSTANTS DIELECTRIC Air or vacuum Paper Plastic Mineral oil Silicone oil Quartz Glass Porcelain Mica Aluminum oxide Tantalum pentoxide Ceramic e DIELECTRIC CONSTANT 1.0 2.0 to 6.0 2.1 to 6.0 2.2 to 2.3 2.7 to 2.8 3.8 to 4.4 4.8 to 8.0 5.1 to 5.9 5.4 to 8.7 8.4 26 12 to 400K In the tantalum electrolytic capacitor, the distance between the plates is very small since it is only the thickness of the tantalum pentoxide film. As the dielectric constant of the tantalum pentoxide is high, the capacitance of a tantalum capacitor is high if the area of the plates is large: C = eA ------t where C = capacitance e = dielectric constant A = surface area of the dielectric t = thickness of the dielectric Tantalum capacitors contain either liquid or solid electrolytes. In solid electrolyte capacitors, a dry material (manganese dioxide) forms the cathode plate. A tantalum lead is embedded in or welded to the pellet, which is in turn connected to a termination or lead wire. The drawings show the construction details of the surface-mount types of tantalum capacitors shown in this catalog. Document Number: 40074 1 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Molded Guide www.vishay.com Vishay Sprague SOLID ELECTROLYTE TANTALUM CAPACITORS Solid electrolyte capacitors contain manganese dioxide, which is formed on the tantalum pentoxide dielectric layer by impregnating the pellet with a solution of manganous nitrate. The pellet is then heated in an oven, and the manganous nitrate is converted to manganese dioxide. The pellet is next coated with graphite, followed by a layer of metallic silver, which provides a conductive surface between the pellet and the leadframe. Molded Chip tantalum capacitor encases the element in plastic resins, such as epoxy materials. The molding compound has been selected to meet the requirements of UL 94 V-0 and outgassing requirements of ASTM E-595. After assembly, the capacitors are tested and inspected to assure long life and reliability. It offers excellent reliability and high stability for consumer and commercial electronics with the added feature of low cost Surface-mount designs of “solid tantalum” capacitors use lead frames or lead frameless designs as shown in the accompanying drawings. TANTALUM CAPACITORS FOR ALL DESIGN CONSIDERATIONS Solid electrolyte designs are the least expensive for a given rating and are used in many applications where their very small size for a given unit of capacitance is of importance. They will typically withstand up to about 10 % of the rated DC working voltage in a reverse direction. Also important are their good low temperature performance characteristics and freedom from corrosive electrolytes. Vishay Sprague patented the original solid electrolyte capacitors and was the first to market them in 1956. Vishay Sprague has the broadest line of tantalum capacitors and has continued its position of leadership in this field. Data sheets covering the various types and styles of Vishay Sprague capacitors for consumer and entertainment electronics, industry, and military applications are available where detailed performance characteristics must be specified. MOLDED CHIP CAPACITOR Silver Adhesive Epoxy Encapsulation Anode Polarity Bar MnO2/Carbon/ Silver Coating Solderable Leadframe Cathode Sintered Termination Tantalum Revision: 08-Mar-2023 Solderable Anode Termination Document Number: 40074 2 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Molded Guide www.vishay.com Vishay Sprague COMMERCIAL PRODUCTS SOLID TANTALUM CAPACITORS - MOLDED CASE SERIES 793DX-CTC3CTC4 293D 593D TR3 TP3 TL3 High performance, automotive grade Very low DCL PRODUCT IMAGE TYPE FEATURES Surface-mount TANTAMOUNT™, molded case Standard industrial grade CECC approved Low ESR TEMPERATURE RANGE -55 °C to +125 °C CAPACITANCE 0.1 μF to 1000 μF RANGE VOLTAGE RANGE 4 V to 75 V CAPACITANCE TOLERANCE 0.1 μF to 100 μF 1 μF to 470 μF 0.47 μF to 1000 μF 0.1 μF to 470 μF 4 V to 50 V 4 V to 50 V 4 V to 75 V 4 V to 50 V LEAKAGE CURRENT DISSIPATION FACTOR CASE CODES TERMINATION Low ESR 0.1 μF to 470 μF 4 V to 50 V ± 10 %, ± 20 % 0.005 CV or 0.25 μA, whichever is greater 0.01 CV or 0.5 μA, whichever is greater 4 % to 30 % 4 % to 6 % A, B, C, D, E A, B, C, D 4 % to 15 % 4 % to 30 % A, B, C, D, E A, B, C, D, E, W 100 % matte tin standard, tin / lead available 4 % to 15 % 4 % to 15 % A, B, C, D, E A, B, C, D, E SOLID TANTALUM CAPACITORS - MOLDED CASE SERIES TX3 TH3 TH4 TH5 E-detonators High temperature +150 °C, automotive grade High temperature +175 °C, automotive grade Very high temperature +200 °C -55 °C to +125 °C -55 °C to +150 °C -55 °C to +175 °C -55 °C to +200 °C 10 μF to 100 μF 0.33 μF to 220 μF 10 μF to 100 μF 4.7 μF to 100 μF 16 V to 25 V 6.3 V to 50 V 6.3 V to 35 V 5 V to 24 V PRODUCT IMAGE Surface-mount TANTAMOUNT™, molded case TYPE FEATURES TEMPERATURE RANGE CAPACITANCE RANGE VOLTAGE RANGE CAPACITANCE TOLERANCE LEAKAGE CURRENT DISSIPATION FACTOR CASE CODES TERMINATION Revision: 08-Mar-2023 ± 10 %, ± 20 % 0.005 CV 0.01 CV or 0.5 μA, whichever is greater 6 % to 20 % 4 % to 8 % 4.5 % to 8 % 6 % to 10 % B, C A, B, C, D, E 100 % matte tin standard, tin / lead and gold plated available B, C, D, E D, E 100 % matte tin Gold plated 100 % matte tin Document Number: 40074 3 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000