TLHG4900, TLHR4900, TLHY4900
www.vishay.com
Vishay Semiconductors
High Efficiency LED in Ø 3 mm Clear Package
FEATURES
• Choice of three bright colors
• Standard Ø 3 mm (T-1) package
• Small mechanical tolerances
• Suitable for DC and high peak current
• Very small viewing angle
• Luminous intensity categorized
19222
• Yellow and green color categorized
DESCRIPTION
• Material categorization: for definitions of
compliance please see www.vishay.com/doc?99912
The TLH.4900 series was developed for applications where
high light output is required.
APPLICATIONS
It is housed in a 3 mm clear plastic package. The small
viewing angle of these devices provides a high brightness.
• Status lights
All LEDs are categorized in luminous intensity groups. The
green and yellow LEDs are categorized additionally in
wavelength groups.
• Off / on indicator
That allows users to assemble LEDs with uniform
appearance.
• Maintenance lights
• Background illumination
• Readout lights
• Legend light
PRODUCT GROUP AND PACKAGE DATA
•
•
•
•
Product group: LED
Package: 3 mm
Product series: standard
Angle of half intensity: ± 16°
PARTS TABLE
PART
LUMINOUS
INTENSITY
(mcd)
COLOR
at IF
(mA)
WAVELENGTH
(nm)
at IF
(mA)
MIN.
TYP.
MAX.
Red
6.3
25
-
10
612
-
625
10
-
2
3
20
GaAsP on GaP
TLHY4900 (1)
Yellow
10
26
-
10
581
-
594
10
-
2.4
3
20
GaAsP on GaP
TLHG4900
Green
16
37
-
10
562
-
575
10
-
2.4
3
20
GaP on GaP
TLHR4900
MIN. TYP. MAX.
FORWARD VOLTAGE
at IF
(V)
TECHNOLOGY
(mA)
MIN. TYP. MAX.
Note
(1) Not for new designs
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
TLHG4900, TLHR4900, TLHY4900
PARAMETER
TEST CONDITION
SYMBOL
VALUE
VR
6
V
Tamb ≤ 60 °C
IF
30
mA
tp ≤ 10 μs
IFSM
1
A
Tamb ≤ 60 °C
PV
100
mW
Tj
100
°C
Tamb
-40 to +100
°C
Tstg
-55 to +100
°C
Tsd
260
°C
RthJA
400
K/W
Reverse voltage
DC forward current
Surge forward current
Power dissipation
Junction temperature
Operating temperature range
Storage temperature range
Soldering temperature
Thermal resistance junction to ambient
Rev. 2.6, 15-Sep-2021
t ≤ 5 s, 2 mm from body
UNIT
Document Number: 83009
1
For technical questions, contact: LED@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TLHG4900, TLHR4900, TLHY4900
www.vishay.com
Vishay Semiconductors
OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
TLHR4900, RED
PARAMETER
TEST CONDITION
IF = 10 mA
Luminous intensity (1)
Dominant wavelength
IF = 10 mA
Peak wavelength
IF = 10 mA
Angle of half intensity
IF = 10 mA
Forward voltage
IF = 20 mA
Reverse voltage
IR = 10 μA
Junction capacitance
VR = 0 V, f = 1 MHz
Note
(1) In one packing unit I
Vmin./IVmax. ≤ 0.5
SYMBOL
MIN.
TYP.
MAX.
UNIT
IV
λd
λp
ϕ
VF
VR
Cj
6.3
612
6
-
25
635
± 16
2
15
50
625
3
-
mcd
nm
nm
°
V
V
pF
OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
TLHY4900, YELLOW, NOT FOR NEW DESIGNS
PARAMETER
TEST CONDITION
IF = 10 mA
Luminous intensity (1)
Dominant wavelength
IF = 10 mA
Peak wavelength
IF = 10 mA
Angle of half intensity
IF = 10 mA
Forward voltage
IF = 20 mA
Reverse voltage
IR = 10 μA
Junction capacitance
VR = 0 V, f = 1 MHz
Note
(1) In one packing unit I
Vmin./IVmax. ≤ 0.5
SYMBOL
MIN.
TYP.
MAX.
UNIT
IV
λd
λp
ϕ
VF
VR
Cj
10
581
6
-
26
585
± 16
2.4
15
50
594
3
-
mcd
nm
nm
°
V
V
pF
OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
TLHG4900, GREEN
PARAMETER
TEST CONDITION
IF = 10 mA
Luminous intensity (1)
Dominant wavelength
IF = 10 mA
Peak wavelength
IF = 10 mA
Angle of half intensity
IF = 10 mA
Forward voltage
IF = 20 mA
Reverse voltage
IR = 10 μA
Junction capacitance
VR = 0 V, f = 1 MHz
Note
(1) In one packing unit I
Vmin./IVmax. ≤ 0.5
SYMBOL
MIN.
TYP.
MAX.
UNIT
IV
λd
λp
ϕ
VF
VR
Cj
16
562
6
-
37
565
± 16
2.4
15
50
575
3
-
mcd
nm
nm
°
V
V
pF
LUMINOUS INTENSITY CLASSIFICATION
GROUP
COLOR CLASSIFICATION
LUMINOUS INTENSITY (mcd)
DOM. WAVELENGTH (nm)
MIN.
MAX.
Q
6.3
12.5
R
10
20
0
S
16
32
T
25
50
U
40
V
63
YELLOW
GREEN
MIN.
MAX.
1
581
584
2
583
586
80
3
585
125
4
587
5
6
Note
• The above type numbers represent the order groups which
include only a few brightness groups. Only one group will be
shipped on each reel or bulk (there will be no mixing of two
groups on one reel/bulk). In order to ensure availability, single
brightness groups will not be orderable. In a similar manner for
colors where wavelength groups are measured and binned,
single wavelength groups will be shipped on any one reel/bulk.
In order to ensure availability, single wavelength groups will not
be orderable
Rev. 2.6, 15-Sep-2021
GROUP
MIN.
MAX.
588
562
565
590
564
567
589
592
566
569
591
594
568
571
7
570
573
8
572
575
Note
• Wavelengths are tested at a current pulse duration of 25 ms
Document Number: 83009
2
For technical questions, contact: LED@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TLHG4900, TLHR4900, TLHY4900
www.vishay.com
Vishay Semiconductors
TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
1000
red
IF - Forward Current (mA)
IF - Forward Current (mA)
60
50
40
30
20
10
100
1
0.1
0
0
20
40
60
80
0
100
10 000
Tamb ≤ 65 °C
0.02
0.05
100
1
10
0.5
0.2
0.1
0.1
1
0.8
0.4
IF = 10 mA
0
95 10027
Fig. 2 - Forward Current vs. Pulse Length
0°
10°
30°
40°
1.0
0.9
50°
0.8
60°
70°
80°
0.6
0.4
0.2
0
0.2
0.4
0.6
95 10044
Fig. 3 - Relative Luminous Intensity vs. Angular Displacement
Rev. 2.6, 15-Sep-2021
20
40
60
80
100
Tamb - Ambient Temperature (°C)
Fig. 5 - Relative Luminous Intensity vs. Ambient Temperature
20°
0.7
10
1.2
t p - Pulse Length (ms)
95 10047
8
red
100
10
6
1.6
0
1
0.01
IV rel - Relative Luminous Intensity
I F - Forward Current (mA)
t p /T= 0.01
4
Fig. 4 - Forward Current vs. Forward Voltage
IV rel - Relative Luminous Intensity
Fig. 1 - Forward Current vs. Ambient Temperature
1000
2
VF - Forward Voltage (V)
95 10026
Tamb - Ambient Temperature (°C)
95 10905
IV rel - Relative Luminous Intensity
tp/T = 0.001
tp = 10 µs
10
2.4
red
2.0
1.6
1.2
0.8
0.4
95 10321
0
10
1
20
0.5
50
0.2
100 200
0.1 0.05
500 IF (mA)
0.02 tp/T
Fig. 6 - Relative Luminous Intensity vs. Forward Current/Duty Cycle
Document Number: 83009
3
For technical questions, contact: LED@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TLHG4900, TLHR4900, TLHY4900
Vishay Semiconductors
10
red
1
0.1
10
1.2
0.8
0.4
IF = 10 mA
0
100
IF - Forward Current (mA)
95 10029
95 10031
Fig. 7 - Relative Luminous Intensity vs. Forward Current
20
40
60
80
100
Tamb - Ambient Temperature (°C)
Fig. 10 - Relative Luminous Intensity vs. Ambient Temperature
1.2
2.4
Ispec - Specific Luminous Intensity
IV rel - Relative Luminous Intensity
yellow
0
0.01
1
red
1.0
0.8
0.6
0.4
0.2
0
590
610
630
650
670
IV rel - Relative Luminous Intensity
yellow
100
tp/T = 0.001
tp = 10 µs
10
1
0.1
95 10030
4
6
8
10
VF - Forward Voltage (V)
Fig. 9 - Forward Current vs. Forward Voltage
Rev. 2.6, 15-Sep-2021
1.2
0.8
0.4
0
10
1
20
0.5
50
0.2
100 200
0.1 0.05
500
0.02
IF (mA)
tp/T
Fig. 11 - Relative Luminous Intensity vs.
Forward Current/Duty Cycle
1000
2
1.6
95 10260
Fig. 8 - Relative Intensity vs. Wavelength
0
yellow
2.0
690
λ - Wavelength (nm)
95 10040
IF - Forward Current (mA)
1.6
IV rel - Relative Luminous Intensity
IV rel - Relative Luminous Intensity
www.vishay.com
10
yellow
1
0.1
0.01
1
95 10033
10
100
IF - Forward Current (mA)
Fig. 12 - Relative Luminous Intensity vs. Forward Current
Document Number: 83009
4
For technical questions, contact: LED@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TLHG4900, TLHR4900, TLHY4900
www.vishay.com
Vishay Semiconductors
Ispec - Specific Luminous Intensity
1.2
yellow
Irel - Relative Intensity
1.0
0.8
0.6
0.4
0.2
0
2.4
green
2.0
1.6
1.2
0.8
0.4
0
550
570
590
610
650
630
λ - Wavelength (nm)
95 10039
Fig. 13 - Relative Intensity vs. Wavelength
10
20
50
100
200
95 10263 1
0.5
0.2
0.1
0.05
Fig. 16 - Specific Luminous Intensity vs. Forward Current
IV rel - Relative Luminous Intensity
IF - Forward Current (mA)
1000
green
100
tp/T = 0.001
tp = 10 µs
10
1
0.1
0
2
95 10034
4
6
8
green
1
0.1
1
95 10037
Fig. 14 - Forward Current vs. Forward Voltage
10
100
IF - Forward Current (mA)
Fig. 17 - Relative Luminous Intensity vs. Forward Current
1.6
1.2
green
green
1.0
1.2
Irel - Relative Intensity
IV rel - Relative Luminous Intensity
10
10
VF - Forward Voltage (V)
500 IF (mA)
0.02 tp/T
0.8
0.4
IF = 10 mA
0
0.6
0.4
0.2
0
0
95 10035
0.8
20
40
60
80
100
Tamb - Ambient Temperature (°C)
Fig. 15 - Rel. Luminous Intensity vs. Ambient Temperature
Rev. 2.6, 15-Sep-2021
520
95 10038
540
560
580
600
620
λ - Wavelength (nm)
Fig. 18 - Relative Intensity vs. Wavelength
Document Number: 83009
5
For technical questions, contact: LED@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TLHG4900, TLHR4900, TLHY4900
www.vishay.com
Vishay Semiconductors
PACKAGE DIMENSIONS in millimeters
C
R1.4 (sphere)
AREA NOT PLANE
6.1 ± 0.3
34.7 ± 0.5
< 0.6
(2.8)
3.4 ± 0.15
4.4 ± 0.3
3.2 ± 0.15
A
Ø 2.9 ± 0.1
1.5 ± 0.5
+ 0.15
+ 0.2
0.5 - 0.1
0.4 - 0.05
technical drawings
according to DIN
specifications
2.54 nom.
Drawing-No.: 6.544-5255.02-4
Issue: 5; 28.07.14
Rev. 2.6, 15-Sep-2021
Document Number: 83009
6
For technical questions, contact: LED@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jan-2022
1
Document Number: 91000