TLZ5V1-GS18

TLZ-Series www.vishay.com Vishay Semiconductors Small Signal Zener Diodes FEATURES • Very sharp reverse characteristic • Low reverse current level • Very high stability • Low noise • High reliability • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 LINKS TO ADDITIONAL RESOURCES APPLICATIONS 3D 3D • Voltage stabilization 3D Models PRIMARY CHARACTERISTICS PARAMETER VALUE UNIT VZ range nom. 2.4 to 56 V Test current IZT 5 to 20 mA VZ specification Pulse current Circuit configuration Single ORDERING INFORMATION DEVICE NAME ORDERING CODE TAPED UNITS PER REEL MINIMUM ORDER QUANTITY TLZ-series TLZ-series-GS18 10 000 (8 mm tape on 13" reel) 10 000/box TLZ-series TLZ-series-GS08 2500 (8 mm tape on 7" reel) 12 500/box PACKAGE PACKAGE NAME MiniMELF (SOD-80) WEIGHT MOLDING COMPOUND FLAMMABILITY RATING MOISTURE SENSITIVITY LEVEL SOLDERING CONDITIONS 31 mg UL 94 V-0 MSL level 1 (according J-STD-020) Peak temperature max. 260 °C ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER Power dissipation TEST CONDITION SYMBOL VALUE UNIT RthJA ≤ 300 K/W Ptot 500 mW IZ Ptot/VZ mA On PC board 50 mm x 50 mm x 1.6 mm RthJA 500 K/W Tj 175 °C Tstg -65 to +175 °C VF 1.5 V Zener current Junction to ambient air Junction temperature Storage temperature range Forward voltage (max.) IF = 200 mA Rev. 2.5, 25-Nov-2021 Document Number: 85635 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TLZ-Series www.vishay.com Vishay Semiconductors ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) ZENER VOLTAGE RANGE PART NUMBER MARKING CODE VZ at IZT1 TEST CURRENT IZT1 V IZT2 mA MIN. MAX. REVERSE LEAKAGE CURRENT IR at VR μA DYNAMIC RESISTANCE ZZ at IZT1 Ω V MAX. ZZK at IZT2 MAX. MAX. 2000 TLZ2V4A 2A4 2.33 2.52 20 1 70 1 100 TLZ2V4B 2B4 2.43 2.63 20 1 70 1 100 2000 TLZ2V7A 2A7 2.54 2.75 20 1 50 1 100 1000 TLZ2V7B 2B7 2.69 2.91 20 1 50 1 100 1000 TLZ3V0A 3A0 2.85 3.07 20 1 50 1 80 1000 TLZ3V0B 3B0 3.01 3.22 20 1 10 1 80 1000 1000 TLZ3V3A 3A3 3.16 3.38 20 1 10 1 70 TLZ3V3B 3B3 3.32 3.53 20 1 10 1 70 1000 TLZ3V6A 3A6 3.455 3.695 20 1 5 1 60 1000 TLZ3V6B 3B6 3.6 3.845 20 1 5 1 60 1000 TLZ3V9A 3A9 3.74 4.01 20 1 3 1 50 1000 TLZ3V9B 3B9 3.89 4.16 20 1 3 1 50 1000 TLZ4V3A 4A3 4.04 4.29 20 1 3 1 40 1000 TLZ4V3B 4B3 4.17 4.43 20 1 3 1 40 1000 TLZ4V3C 4C3 4.3 4.57 20 1 3 1 40 1000 TLZ4V7A 4A7 4.44 4.68 20 1 5 1 25 900 TLZ4V7B 4B7 4.55 4.8 20 1 5 1 25 900 TLZ4V7C 4C7 4.68 4.93 20 1 5 1 25 900 TLZ5V1A 5A1 4.81 5.07 20 1 2 2 20 800 TLZ5V1B 5B1 4.94 5.2 20 1 2 2 20 800 TLZ5V1C 5C1 5.09 5.37 20 1 2 2 20 800 TLZ5V6A 5A6 5.28 5.55 20 1 1 2 13 500 TLZ5V6B 5B6 5.45 5.73 20 1 1 2 13 500 TLZ5V6C 5C6 5.61 5.91 20 1 1 2 13 500 TLZ6V2A 6A2 5.78 6.09 20 1 3 4 10 300 TLZ6V2B 6B2 5.96 6.27 20 1 3 4 10 300 TLZ6V2C 6C2 6.12 6.44 20 1 3 4 10 300 TLZ6V8A 6A8 6.29 6.63 20 0.5 2 4 8 150 TLZ6V8B 6B8 6.49 6.83 20 0.5 2 4 8 150 TLZ6V8C 6C8 6.66 7.01 20 0.5 2 4 8 150 120 TLZ7V5A 7A5 6.85 7.22 20 0.5 3 6.5 8 TLZ7V5B 7B5 7.07 7.45 20 0.5 3 6.73 8 120 TLZ7V5C 7C5 7.29 7.67 20 0.5 3 6.93 8 120 TLZ8V2A 8A2 7.53 7.92 20 0.5 7.5 7.15 8 120 TLZ8V2B 8B2 7.78 8.19 20 0.5 7.5 7.39 8 120 TLZ8V2C 8C2 8.03 8.45 20 0.5 7.5 7.63 8 120 TLZ9V1A 9A1 8.29 8.73 20 0.5 0.04 7.88 8 120 TLZ9V1B 9B1 8.57 9.01 20 0.5 0.04 8.14 8 120 TLZ9V1C 9C1 8.83 9.3 20 0.5 0.04 8.39 8 120 TLZ10A 10A 9.12 9.59 20 0.5 0.04 8.66 8 120 TLZ10B 10B 9.41 9.9 20 0.5 0.04 8.94 8 120 TLZ10C 10C 9.7 10.2 20 0.5 0.04 9.22 8 120 TLZ10D 10D 9.94 10.44 20 0.5 0.04 9.44 8 120 Rev. 2.5, 25-Nov-2021 Document Number: 85635 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TLZ-Series www.vishay.com Vishay Semiconductors ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) ZENER VOLTAGE RANGE PART NUMBER MARKING CODE VZ at IZT1 TEST CURRENT IZT1 V IZT2 mA MIN. MAX. REVERSE LEAKAGE CURRENT IR at VR μA DYNAMIC RESISTANCE ZZ at IZT1 Ω V MAX. ZZK at IZT2 MAX. MAX. 120 TLZ11A 11A 10.18 10.71 10 0.5 0.04 9.67 10 TLZ11B 11B 10.5 11.05 10 0.5 0.04 9.98 10 120 TLZ11C 11C 10.82 11.38 10 0.5 0.04 10.28 10 120 TLZ12A 12A 11.13 11.71 10 0.5 0.04 10.6 12 110 TLZ12B 12B 11.44 12.03 10 0.5 0.04 10.9 12 110 TLZ12C 12C 11.74 12.35 10 0.5 0.04 11.2 12 110 TLZ13A 13A 12.11 12.75 10 0.5 0.04 11.5 14 110 TLZ13B 13B 12.55 13.21 10 0.5 0.04 11.9 14 110 TLZ13C 13C 12.99 13.66 10 0.5 0.04 12.3 14 110 TLZ15A 15A 13.44 14.13 10 0.5 0.04 12.8 16 110 TLZ15B 15B 13.89 14.62 10 0.5 0.04 13.2 16 110 TLZ15C 15C 14.35 15.09 10 0.5 0.04 13.6 16 110 TLZ16A 16A 14.8 15.57 10 0.5 0.04 14.1 18 150 TLZ16B 16B 15.25 16.04 10 0.5 0.04 14.5 18 150 TLZ16C 16C 15.69 16.51 10 0.5 0.04 14.9 18 150 TLZ18A 18A 16.22 17.06 10 0.5 0.04 15.4 23 150 TLZ18B 18B 16.82 17.7 10 0.5 0.04 16 23 150 TLZ18C 18C 17.42 18.33 10 0.5 0.04 16.5 23 150 TLZ20A 20A 18.02 18.96 10 0.5 0.04 17.1 28 200 TLZ20B 20B 18.63 19.59 10 0.5 0.04 17.7 28 200 TLZ20C 20C 19.23 20.22 10 0.5 0.04 18.3 28 200 TLZ20D 20D 19.72 20.72 10 0.5 0.04 18.7 28 200 TLZ22A 22A 20.15 21.2 5 0.5 0.04 19.1 30 200 TLZ22B 22B 20.64 21.71 5 0.5 0.04 19.6 30 200 TLZ22C 22C 21.08 22.17 5 0.5 0.04 20 30 200 TLZ22D 22D 21.52 22.63 5 0.5 0.04 20.4 30 200 TLZ24A 24A 22.05 23.18 5 0.5 0.04 20.9 35 200 TLZ24B 24B 22.61 23.77 5 0.5 0.04 21.5 35 200 TLZ24C 24C 23.12 24.31 5 0.5 0.04 22 35 200 TLZ24D 24D 23.63 24.85 5 0.5 0.04 22.4 35 200 TLZ27A 27A 24.26 25.52 5 0.5 0.04 23 45 250 TLZ27B 27B 24.97 26.26 5 0.5 0.04 23.7 45 250 TLZ27C 27C 25.63 26.95 5 0.5 0.04 24.3 45 250 TLZ27D 27D 26.29 27.64 5 0.5 0.04 25 45 250 TLZ30A 30A 26.99 28.39 5 0.5 0.04 25.6 55 250 TLZ30B 30B 27.7 29.13 5 0.5 0.04 26.3 55 250 TLZ30C 30C 28.36 29.82 5 0.5 0.04 26.9 55 250 TLZ30D 30D 29.02 30.51 5 0.5 0.04 27.6 55 250 TLZ33A 33A 29.68 31.22 5 0.5 0.04 28.2 65 250 TLZ33B 33B 30.32 31.88 5 0.5 0.04 28.8 65 250 TLZ33C 33C 30.9 32.5 5 0.5 0.04 29.4 65 250 TLZ33D 33D 31.49 33.11 5 0.5 0.04 29.9 65 250 TLZ36A 36A 32.14 33.79 5 0.5 0.04 30.5 75 250 TLZ36B 36B 32.79 34.49 5 0.5 0.04 31.2 75 250 TLZ36C 36C 33.4 35.13 5 0.5 0.04 31.7 75 250 TLZ36D 36D 34.01 35.77 5 0.5 0.04 32.3 75 250 Rev. 2.5, 25-Nov-2021 Document Number: 85635 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TLZ-Series www.vishay.com Vishay Semiconductors ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) ZENER VOLTAGE RANGE MARKING CODE PART NUMBER VZ at IZT1 TEST CURRENT IZT1 V REVERSE LEAKAGE CURRENT IZT2 IR at VR mA MIN. MAX. DYNAMIC RESISTANCE μA ZZ at IZT1 ZZK at IZT2 Ω V MAX. MAX. MAX. 250 TLZ39A 39A 34.68 36.47 5 0.5 0.04 32.9 85 TLZ39B 39B 35.36 37.19 5 0.5 0.04 33.6 85 250 TLZ39C 39C 36 37.85 5 0.5 0.04 34.2 85 250 TLZ39D 39D 36.63 38.52 5 0.5 0.04 34.8 85 250 TLZ39E 39E 37.36 39.29 5 0.5 0.04 35.5 85 250 TLZ39F 39F 38.14 40.11 5 0.5 0.04 36.2 85 250 TLZ39G 250 39G 38.94 40.8 5 0.5 0.04 37 85 TLZ43 43 40 45 5 - 0.04 38 90 - TLZ47 47 44 49 5 - 0.04 41.8 90 - TLZ51 51 48 54 5 - 0.04 45.6 100 - TLZ56 56 53 60 5 - 0.04 50.4 100 - BASIC CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 1.3 VZtn - Relative Voltage Change Ptot - Total Power Dissipation (mW) 600 500 400 300 200 100 0 VZtn = VZt/VZ (25 °C) 1.2 95 9602 80 120 160 200 40 Tamb - Ambient Temperature (°C) Fig. 1 - Total Power Dissipation vs. Ambient Temperature 1.1 4 x 10-4/K 2 x 10-4/K 0 1.0 - 2 x 10-4/K - 4 x 10-4/K 0.9 - 60 0 60 120 180 240 Tj - Junction Temperature (°C) 95 9599 Fig. 3 - Typical Change of Working Voltage vs. Junction Temperature 15 TKVZ - Temperature Coefficient of VZ (10-4/K) 1000 VZ - Voltage Change (mV) 8 x 10-4/K 6 x 10-4/K 0.8 0 100 IZ = 5 mA 10 10 5 IZ = 5 mA 0 -5 1 0 95 9598 TKVZ = 10 x 10-4/K 5 10 15 20 0 25 VZ - Z-Voltage (V) Fig. 2 - Typical Change of Working Voltage under Operating Conditions at Tamb = 25 °C 95 9600 10 20 30 40 50 VZ - Z-Voltage (V) Fig. 4 - Temperature Coefficient of VZ vs. Z-Voltage Rev. 2.5, 25-Nov-2021 Document Number: 85635 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TLZ-Series www.vishay.com Vishay Semiconductors 50 VR = 2 V Tj = 25 °C 100 50 30 20 10 0 0 0 10 5 15 20 25 VZ - Z-Voltage (V) 95 9601 15 20 25 30 35 VZ - Z-Voltage (V) 95 9607 Fig. 5 - Diode Capacitance vs. Z-Voltage Fig. 8 - Z-Current vs. Z-Voltage 1000 rZ - Differential Z-Resistance (Ω) 100 IF - Forward Current (mA) Ptot = 500 mW Tamb = 25 °C 40 150 IZ - Z-Current (mA) CD - Diode Capacitance (pF) 200 10 Tj = 25 °C 1 0.1 0.01 0.001 IZ = 1 mA 100 5 mA 10 10 mA Tj = 25 °C 1 0 0.2 0.4 0.6 0.8 1.0 VF - Forward Voltage (V) 959605 0 95 9606 Fig. 6 - Forward Current vs. Forward Voltage 5 10 15 20 25 VZ - Z-Voltage (V) Fig. 9 - Differential Z-Resistance vs. Z-Voltage 100 IZ - Z-Current (mA) 80 Ptot = 500 mW Tamb = 25 °C 60 40 20 0 0 95 9604 4 6 8 12 20 VZ - Z-Voltage (V) Fig. 7 - Z-Current vs. Z-Voltage Rev. 2.5, 25-Nov-2021 Document Number: 85635 5 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TLZ-Series Zthp - Thermal Resistance for Pulse Cond. (K/W) www.vishay.com Vishay Semiconductors 1000 tp/T = 0.5 100 tp/T = 0.2 Single Pulse RthJA = 300 K/W T = Tj max. - Tamb 10 tp/T = 0.01 tp/T = 0.1 tp/T = 0.02 tp/T = 0.05 1 10-1 iZM = (- VZ + (VZ2 + 4rzj x T/Zthp) 1/2)/(2rzj) 100 101 102 95 9603 tp - Pulse Length (ms) Fig. 10 - Thermal Response MARKING VOLTAGE GROUP TLZ2V4A 2A4 2A4 2A4 2A4 18660_2 Remark The Zener voltage group TLZ2V4A is printed with max 3 digits 3 times on the surface. The marking should be readable at minimum 2 times. The third print is allowed to be incomplete due to tolerances in diameter of the glass body. Rev. 2.5, 25-Nov-2021 Document Number: 85635 6 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TLZ-Series www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters (inches): MiniMELF (SOD-80) 1.6 (0.063) 1.4 (0.055) Cathode indentification * 0.47 (0.019) max. 3.7 (0.146) 3.3 (0.130) * The gap between plug and glass can be either on cathode or anode side 2.5 (0.098) max. 1.25 (0.49) min. 2 (0.079) min. Foot print recommendation: 5 (0.197) ref. Rev. 2.5, 25-Nov-2021 Document Number: 85635 7 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2023 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2023 1 Document Number: 91000