TMCME1E226MTRF

TMCM www.vishay.com Vishay Polytech Solid Tantalum Surface Mount Chip Capacitors, Molded Case, Extended Range FEATURES • • • • • Small size, suitable for high density packaging Terminations: 100 % matte tin Qualified to EIA-717 MSL level: 1 Compatible with “high volume” automatic pick and place equipment • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 PERFORMANCE / ELECTRICAL CHARACTERISTICS Operating Temperature: -55 °C to +125 °C (above 85 °C, voltage derating is required) Available Available APPLICATIONS Capacitance Range: 0.47 μF to 470 μF • Industrial • AV equipment • General purpose Capacitance Tolerance: ± 10 %, ± 20 % Voltage Rating: 2.5 VDC to 35 VDC ORDERING INFORMATION TMCM A 0J 106 M TR (2) F TYPE CASE CODE DC VOLTAGE RATING AT +85 °C CAPACITANCE (μF) CAPACITANCE TOLERANCE PACKAGING POLARITY (OPTIONAL) TERMINAL CODE See Ratings and Case Codes table 0E = 2.5 V 0G = 4.0 V 0J = 6.3 V (7 V) 1A = 10 V 1C = 16 V 1D = 20 V 1E = 25 V 1V = 35 V This is expressed in picofarads. The first two digits are the significant figures. The third is the number of zeros to follow. K = ± 10 % M = ± 20 % TR = 7" reel, cathodes close to perforation side Halogen-free (special order), not applicable for E case F= lead (Pb)-free terminations DIMENSIONS in inches [millimeters] A, B, C case Anode indication belt mark L W a l l a W a H E case l CASE CODE l EIA SIZE L W H l a A 3216-18 0.126 ± 0.008 [3.2 ± 0.2] 0.063 ± 0.008 [1.6 ± 0.2] 0.063 ± 0.008 [1.6 ± 0.2] 0.028 ± 0.012 [0.7 ± 0.3] 0.047 ± 0.008 [1.2 ± 0.2] B 3528-21 0.138 ± 0.008 [3.5 ± 0.2] 0.110 ± 0.008 [2.8 ± 0.2] 0.075 ± 0.008 [1.9 ± 0.2] 0.030 ± 0.012 [0.8 ± 0.3] 0.087 ± 0.008 [2.2 ± 0.2] C 6032-28 0.228 ± 0.008 [5.8 ± 0.2] 0.126 ± 0.008 [3.2 ± 0.2] 0.100 ± 0.008 [2.5 ± 0.2] 0.051 ± 0.012 [1.3 ± 0.3] 0.087 ± 0.008 [2.2 ± 0.2] E 7343-30 0.287 ± 0.008 [7.3 ± 0.2] 0.169 ± 0.012 [4.3 ± 0.3] 0.112 ± 0.008 [2.8 ± 0.2] 0.051 ± 0.012 [1.3 ± 0.3] 0.094 ± 0.008 [2.4 ± 0.2] Revision: 01-Apr-2021 Document Number: 40178 1 For technical questions, contact: polytech@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TMCM www.vishay.com Vishay Polytech RATINGS AND CASE CODES μF 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 150 220 330 470 2.5 V 4.0 V A A A A/B A/B A/B A/B/C A/B/C A/B/C/E A/B/C/E B/C/E B/C/E A A A A/B A/B A/B A/B/C A/B/C A/B/C/E A/B/C/E A/B/C/E B/C/E E 6.3 V (7 V) A A A A/B A/B A/B A/B/C A/B/C A/B/C/E A/B/C/E B/C/E B/C/E C/E E 10 V A A A A/B A/B A/B A/B/C A/B/C A/B/C/E B/C/E B/C/E C/E E E 16 V 20 V A A A A/B A/B B B/C B/C B/C/E C/E E E A A A A/B A/B A/B A/B/C A/B/C B/C/E B/C/E C/E C/E 25 V 35 V A A A A/B A/B B C C C/E E E A A A A/B A/B A/B B/C B/C C/E C/E E E MARKING C, E Case A, B Case + Simplified code of rated voltage (G: 4 V) GA7 A Simplified code of nominal capacitance (A7: 10 μF) + Anode indication belt mark Date code Anode indication belt mark Nominal capacitance value (15 μF) 15 16A Rated voltage (16 V) SIMPLIFIED VOLTAGE CODES, CASES A, B VOLTAGE CODE CODE V 2.5 e 4.0 G 6.3 (7) J 10 A SIMPLIFIED CAP CODES, CASES A, B CAPACITANCE CODE CODE μF 0.47 S5 0.68 W5 1.0 A6 1.5 E6 2.2 J6 3.3 N6 4.7 S6 6.8 W6 10 A7 15 E7 Revision: 01-Apr-2021 VOLTAGE CODE V 16 20 25 35 CAPACITANCE CODE μF 22 33 47 68 100 150 220 330 470 Date code CODE C D E V CODE J7 N7 S7 W7 A8 E8 J8 N8 S8 Document Number: 40178 2 For technical questions, contact: polytech@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TMCM www.vishay.com Vishay Polytech DATE CODE MONTH YEAR 1 2 3 4 5 6 7 8 9 10 11 12 2017 A B C D E F G H J K L M 2018 N P Q R S T U V W X Y Z 2019 a b c d e f g h j k l m 2020 n p q r s t u v w x y z 2021 A B C D E F G H J K L M 2022 N P Q R S T U V W X Y Z 2023 a b c d e f g h j k l m 2024 n p q r s t u v w x y z Note • Marking code repeats every four years in alphabetical order (letter of I, i, O, and o are excluded) STANDARD RATINGS CAPACITANCE (μF) CASE CODE PART NUMBER MAX. DCL AT +25 °C (μA) MAX. DF AT +25 °C, 120 Hz (%) MAX. ESR AT +25 °C, 100 kHz (Ω) MAX. RIPPLE, 100 kHz IRMS (A) 2.5 VDC AT +85 °C, 1.6 VDC AT +125 °C 6.8 A TMCMA0E685(1)TRF 0.5 6 4.0 0.140 10 A TMCMA0E106(1)TRF 0.5 8 2.0 0.197 15 A TMCMA0E156(1)TRF 0.5 8 2.9 0.164 22 A TMCMA0E226(1)TRF 0.6 8 2.0 0.197 22 B TMCMB0E226(1)TRF 0.6 8 1.1 0.295 33 A TMCMA0E336(1)TRF 0.8 8 2.0 0.197 33 B TMCMB0E336(1)TRF 0.8 8 1.1 0.295 47 A TMCMA0E476(1)TRF 1.2 12 2.0 0.197 47 B TMCMB0E476(1)TRF 1.2 8 1.1 0.295 68 A TMCMA0E686(1)TRF 1.7 18 2.0 0.197 68 B TMCMB0E686(1)TRF 1.7 8 1.1 0.295 68 C TMCMC0E686(1)TRF 1.7 8 1.1 0.302 100 A TMCMA0E107(1)TRF 5.0 18 1.1 0.266 100 B TMCMB0E107(1)TRF 2.5 12 1.1 0.295 100 C TMCMC0E107(1)TRF 2.5 8 1.1 0.302 150 A TMCMA0E157(1)TRF 7.5 30 1.8 0.208 150 B TMCMB0E157(1)TRF 3.8 18 1.1 0.295 150 C TMCMC0E157(1)TRF 3.8 8 1.1 0.302 150 E TMCME0E157(1)TRF 3.8 8 0.3 0.632 220 A TMCMA0E227(1)TRF 27.5 30 1.8 0.208 220 B TMCMB0E227(1)TRF 5.5 18 1.1 0.295 220 C TMCMC0E227(1)TRF 5.5 8 1.1 0.302 220 E TMCME0E227(1)TRF 5.5 8 0.3 0.632 0.295 330 B TMCMB0E337(1)TRF 16.5 30 1.1 330 C TMCMC0E337(1)TRF 8.3 18 1.1 0.302 330 E TMCME0E337(1)TRF 8.3 10 0.3 0.632 0.295 470 B TMCMB0E477MTRF 58.8 30 1.1 470 C TMCMC0E477(1)TRF 11.8 18 1.1 0.302 470 E TMCME0E477(1)TRF 11.8 10 0.2 0.775 Note • Part number definition: (1) Tolerance: For 10 % tolerance, specify “K”; for 20 % tolerance, change to “M” Revision: 01-Apr-2021 Document Number: 40178 3 For technical questions, contact: polytech@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TMCM www.vishay.com Vishay Polytech STANDARD RATINGS CAPACITANCE (μF) CASE CODE 4.7 6.8 10 15 15 22 22 33 33 47 47 47 68 68 68 100 100 100 100 150 150 150 150 220 220 220 220 330 330 330 470 A A A A B A B A B A B C A B C A B C E A B C E A B C E B C E E 3.3 4.7 6.8 10 10 15 15 22 22 33 33 33 47 47 47 68 68 68 68 100 A A A A B A B A B A B C A B C A B C E A PART NUMBER MAX. DCL AT +25 °C (μA) MAX. DF AT +25 °C, 120 Hz (%) 4 VDC AT +85 °C, 2.5 VDC AT +125 °C TMCMA0G475(1)TRF 0.5 6 TMCMA0G685(1)TRF 0.5 6 TMCMA0G106(1)TRF 0.5 8 TMCMA0G156(1)TRF 0.6 8 TMCMB0G156(1)TRF 0.6 8 TMCMA0G226(1)TRF 0.9 8 TMCMB0G226(1)TRF 0.9 8 TMCMA0G336(1)TRF 1.3 8 TMCMB0G336(1)TRF 1.3 8 TMCMA0G476(1)TRF 1.9 12 TMCMB0G476(1)TRF 1.9 8 TMCMC0G476(1)TRF 1.9 8 TMCMA0G686(1)TRF 5.4 12 TMCMB0G686(1)TRF 2.7 8 TMCMC0G686(1)TRF 2.7 8 TMCMA0G107(1)TRF 8.0 30 TMCMB0G107(1)TRF 4.0 12 TMCMC0G107(1)TRF 4.0 8 TMCME0G107(1)TRF 4.0 8 TMCMA0G157(1)TRF 60.0 30 TMCMB0G157(1)TRF 6.0 18 TMCMC0G157(1)TRF 6.0 8 TMCME0G157(1)TRF 6.0 8 TMCMA0G227MTRF 88.0 30 TMCMB0G227(1)TRF 17.6 18 TMCMC0G227(1)TRF 8.8 12 TMCME0G227(1)TRF 8.8 8 TMCMB0G337MTRF 26.4 30 TMCMC0G337(1)TRF 13.2 18 TMCME0G337(1)TRF 13.2 10 TMCME0G477(1)TRF 18.8 16 6.3 VDC (7 VDC) AT +85 °C, 4 VDC AT +125 °C TMCMA0J335(1)TRF 0.5 6 TMCMA0J475(1)TRF 0.5 6 TMCMA0J685(1)TRF 0.5 6 TMCMA0J106(1)TRF 0.7 8 TMCMB0J106(1)TRF 0.7 8 TMCMA0J156(1)TRF 1.1 8 TMCMB0J156(1)TRF 1.1 8 TMCMA0J226(1)TRF 1.5 8 TMCMB0J226(1)TRF 1.5 8 TMCMA0J336(1)TRF 2.3 10 TMCMB0J336(1)TRF 2.3 8 TMCMC0J336(1)TRF 2.3 8 TMCMA0J476(1)TRF 5.9 12 TMCMB0J476(1)TRF 3.3 8 TMCMC0J476(1)TRF 3.3 8 TMCMA0J686(1)TRF 8.6 20 TMCMB0J686(1)TRF 4.8 10 TMCMC0J686(1)TRF 4.8 8 TMCME0J686(1)TRF 4.8 8 TMCMA0J107MTRF 31.5 30 MAX. ESR AT +25 °C, 100 kHz (Ω) MAX. RIPPLE, 100 kHz IRMS (A) 4.0 4.0 2.0 2.9 1.7 1.8 1.1 2.0 1.1 2.0 1.1 1.1 2.0 1.1 1.1 1.1 1.1 1.1 0.6 1.8 1.1 1.1 0.3 1.8 1.1 1.1 0.3 1.1 1.1 0.3 0.2 0.140 0.140 0.197 0.164 0.238 0.208 0.295 0.197 0.295 0.197 0.295 0.302 0.197 0.295 0.302 0.266 0.295 0.302 0.447 0.208 0.295 0.302 0.632 0.208 0.295 0.302 0.632 0.295 0.302 0.632 0.775 4.0 4.0 4.0 2.9 1.7 4.0 1.7 1.8 1.1 2.0 1.1 1.1 1.8 1.1 1.1 2.0 1.1 1.1 0.6 1.8 0.140 0.140 0.140 0.164 0.238 0.140 0.238 0.208 0.295 0.197 0.295 0.302 0.208 0.295 0.302 0.197 0.295 0.302 0.447 0.208 Note • Part number definition: (1) Tolerance: For 10 % tolerance, specify “K”; for 20 % tolerance, change to “M” Revision: 01-Apr-2021 Document Number: 40178 4 For technical questions, contact: polytech@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TMCM www.vishay.com Vishay Polytech STANDARD RATINGS CAPACITANCE (μF) CASE CODE PART NUMBER MAX. DCL AT +25 °C (μA) MAX. DF AT +25 °C, 120 Hz (%) MAX. ESR AT +25 °C, 100 kHz (Ω) MAX. RIPPLE, 100 kHz IRMS (A) 6.3 VDC (7 VDC) AT +85 °C, 4 VDC AT +125 °C 100 B TMCMB0J107(1)TRF 7.0 12 1.1 0.295 100 C TMCMC0J107(1)TRF 7.0 8 1.1 0.302 100 E TMCME0J107(1)TRF 7.0 8 0.6 0.447 150 B TMCMB0J157(1)TRF 18.9 20 1.1 0.295 150 C TMCMC0J157(1)TRF 10.5 10 1.1 0.302 150 E TMCME0J157(1)TRF 10.5 8 0.3 0.632 220 B TMCMB0J227MTRF 27.7 30 1.1 0.295 220 C TMCMC0J227(1)TRF 15.4 18 1.1 0.302 220 E TMCME0J227(1)TRF 15.4 10 0.3 0.632 330 C TMCMC0J337MTRF 23.1 30 1.1 0.302 330 E TMCME0J337(1)TRF 23.1 16 0.2 0.775 470 E TMCME0J477(1)TRF 32.9 20 0.3 0.632 2.2 A TMCMA1A225(1)TRF 0.5 6 4.4 0.133 3.3 A TMCMA1A335(1)TRF 0.5 6 4.0 0.140 4.7 A TMCMA1A475(1)TRF 0.5 6 4.0 0.140 0.140 10 VDC AT +85 °C, 6.3 VDC AT +125 °C 6.8 A TMCMA1A685(1)TRF 0.7 6 4.0 6.8 B TMCMB1A685(1)TRF 0.7 6 2.8 0.185 10 A TMCMA1A106(1)TRF 1.0 8 2.9 0.164 10 B TMCMB1A106(1)TRF 1.0 8 1.7 0.238 0.164 15 A TMCMA1A156(1)TRF 1.5 8 2.9 15 B TMCMB1A156(1)TRF 1.5 8 1.7 0.238 22 A TMCMA1A226(1)TRF 4.4 12 2.4 0.180 22 B TMCMB1A226(1)TRF 2.2 8 1.1 0.295 22 C TMCMC1A226(1)TRF 2.2 8 1.7 0.243 33 A TMCMA1A336(1)TRF 6.6 18 2.0 0.197 33 B TMCMB1A336(1)TRF 3.3 8 1.1 0.295 33 C TMCMC1A336(1)TRF 3.3 8 1.1 0.302 0.173 47 A TMCMA1A476MTRF 9.4 20 2.6 47 B TMCMB1A476(1)TRF 4.7 10 1.1 0.295 47 C TMCMC1A476(1)TRF 4.7 8 1.1 0.302 47 E TMCME1A476(1)TRF 4.7 8 0.9 0.365 68 B TMCMB1A686(1)TRF 6.8 18 1.1 0.295 68 C TMCMC1A686(1)TRF 6.8 8 1.1 0.302 68 E TMCME1A686(1)TRF 6.8 8 0.6 0.447 100 B TMCMB1A107MTRF 20.0 30 1.7 0.238 100 C TMCMC1A107(1)TRF 10.0 10 1.1 0.302 100 E TMCME1A107(1)TRF 10.0 8 0.6 0.447 150 C TMCMC1A157MTRF 15.0 18 1.1 0.302 150 E TMCME1A157(1)TRF 15.0 8 0.3 0.632 220 E TMCME1A227(1)TRF 22.0 12 0.2 0.775 330 E TMCME1A337(1)TRF 33.0 30 0.3 0.632 Note • Part number definition: (1) Tolerance: For 10 % tolerance, specify “K”; for 20 % tolerance, change to “M” Revision: 01-Apr-2021 Document Number: 40178 5 For technical questions, contact: polytech@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TMCM www.vishay.com Vishay Polytech STANDARD RATINGS CAPACITANCE (μF) CASE CODE PART NUMBER MAX. DCL AT +25 °C (μA) MAX. DF AT +25 °C, 120 Hz (%) MAX. ESR AT +25 °C, 100 kHz (Ω) MAX. RIPPLE, 100 kHz IRMS (A) 16 VDC AT +85 °C, 10 VDC AT +125 °C 1.5 A TMCMA1C155(1)TRF 0.5 6 6.6 0.109 2.2 A TMCMA1C225(1)TRF 0.5 6 6.6 0.109 3.3 A TMCMA1C335(1)TRF 0.5 6 4.0 0.140 4.7 A TMCMA1C475(1)TRF 0.8 6 4.0 0.140 4.7 B TMCMB1C475(1)TRF 0.8 6 2.8 0.185 6.8 A TMCMA1C685(1)TRF 1.1 6 4.0 0.140 6.8 B TMCMB1C685(1)TRF 1.1 6 2.8 0.185 10 A TMCMA1C106(1)TRF 1.6 8 2.9 0.164 10 B TMCMB1C106(1)TRF 1.6 8 1.7 0.238 15 A TMCMA1C156(1)TRF 2.4 12 2.9 0.164 15 B TMCMB1C156(1)TRF 2.4 8 1.7 0.238 15 C TMCMC1C156(1)TRF 2.4 8 1.7 0.243 22 A TMCMA1C226MTRF 7.0 16 2.9 0.164 0.238 22 B TMCMB1C226(1)TRF 3.5 8 1.7 22 C TMCMC1C226(1)TRF 3.5 8 1.1 0.302 33 B TMCMB1C336(1)TRF 5.3 12 1.1 0.295 33 C TMCMC1C336(1)TRF 5.3 8 1.1 0.302 33 E TMCME1C336(1)TRF 5.3 8 0.9 0.365 47 B TMCMB1C476MTRF 7.5 20 1.7 0.238 47 C TMCMC1C476(1)TRF 7.5 8 2.2 0.213 47 E TMCME1C476(1)TRF 7.5 8 0.9 0.365 68 C TMCMC1C686(1)TRF 10.9 20 1.1 0.302 0.447 68 E TMCME1C686(1)TRF 10.9 8 0.6 100 C TMCMC1C107MTRF 16.0 20 1.7 0.243 100 E TMCME1C107(1)TRF 16.0 8 0.6 0.447 20 VDC AT +85 °C, 13 VDC AT +125 °C 1.0 A TMCMA1D105(1)TRF 0.5 4 6.6 0.109 1.5 A TMCMA1D155(1)TRF 0.5 6 4.4 0.133 2.2 A TMCMA1D225(1)TRF 0.5 6 4.4 0.133 3.3 A TMCMA1D335(1)TRF 0.7 6 4.0 0.140 3.3 B TMCMB1D335(1)TRF 0.7 6 3.9 0.157 4.7 A TMCMA1D475(1)TRF 0.9 6 4.0 0.140 4.7 B TMCMB1D475(1)TRF 0.9 6 2.8 0.185 6.8 B TMCMB1D685(1)TRF 1.4 6 2.2 0.209 10 B TMCMB1D106(1)TRF 2.0 8 2.2 0.209 10 C TMCMC1D106(1)TRF 2.0 8 1.7 0.243 15 B TMCMB1D156(1)TRF 3.0 8 1.1 0.295 15 C TMCMC1D156(1)TRF 3.0 8 1.7 0.243 22 B TMCMB1D226(1)TRF 4.4 8 1.7 0.238 22 C TMCMC1D226(1)TRF 4.4 8 1.7 0.243 22 E TMCME1D226(1)TRF 4.4 8 0.9 0.365 33 C TMCMC1D336(1)TRF 6.6 8 1.0 0.316 33 E TMCME1D336(1)TRF 6.6 8 0.9 0.365 47 E TMCME1D476(1)TRF 9.4 8 0.9 0.365 68 E TMCME1D686(1)TRF 13.6 8 0.5 0.490 Note • Part number definition: (1) Tolerance: For 10 % tolerance, specify “K”; for 20 % tolerance, change to “M” Revision: 01-Apr-2021 Document Number: 40178 6 For technical questions, contact: polytech@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TMCM www.vishay.com Vishay Polytech STANDARD RATINGS CAPACITANCE (μF) CASE CODE 0.68 1.0 1.5 2.2 2.2 3.3 3.3 4.7 4.7 6.8 6.8 10 10 15 15 22 22 33 47 A A A A B A B A B B C B C C E C E E E 0.47 0.68 1.0 1.5 1.5 2.2 2.2 3.3 4.7 6.8 10 10 15 22 A A A A B A B B C C C E E E PART NUMBER MAX. DCL AT +25 °C (μA) MAX. DF AT +25 °C, 120 Hz (%) MAX. ESR AT +25 °C, 100 kHz (Ω) MAX. RIPPLE, 100 kHz IRMS (A) 9.7 6.6 4.4 4.4 3.9 2.8 3.9 6.6 2.8 2.8 1.7 2.2 1.7 1.7 0.9 1.1 0.9 0.9 0.9 0.090 0.109 0.133 0.133 0.157 0.167 0.157 0.109 0.185 0.185 0.243 0.209 0.243 0.243 0.365 0.302 0.365 0.365 0.365 16.5 9.7 6.6 4.4 3.9 4.4 5.5 3.9 2.8 1.7 1.7 1.1 0.9 0.9 0.069 0.090 0.109 0.133 0.157 0.133 0.132 0.157 0.189 0.243 0.243 0.330 0.365 0.365 25 VDC AT +85 °C, 16 VDC AT +125 °C TMCMA1E684(1)TRF 0.5 4 TMCMA1E105(1)TRF 0.5 4 TMCMA1E155(1)TRF 0.5 6 TMCMA1E225(1)TRF 0.6 6 TMCMB1E225(1)TRF 0.6 6 TMCMA1E335(1)TRF 0.8 6 TMCMB1E335(1)TRF 0.8 6 TMCMA1E475MTRF 1.2 6 TMCMB1E475(1)TRF 1.2 6 TMCMB1E685(1)TRF 1.7 8 TMCMC1E685(1)TRF 1.7 8 TMCMB1E106(1)TRF 2.5 8 TMCMC1E106(1)TRF 2.5 8 TMCMC1E156(1)TRF 3.8 8 TMCME1E156(1)TRF 3.8 8 TMCMC1E226(1)TRF 5.5 8 TMCME1E226(1)TRF 5.5 8 TMCME1E336(1)TRF 8.3 8 TMCME1E476(1)TRF 11.8 8 35 VDC AT +85 °C, 22 VDC AT +125 °C TMCMA1V474(1)TRF 0.5 4 TMCMA1V684(1)TRF 0.5 4 TMCMA1V105(1)TRF 0.5 4 TMCMA1V155(1)TRF 0.5 6 TMCMB1V155(1)TRF 0.5 6 TMCMA1V225MTRF 0.8 8 TMCMB1V225(1)TRF 0.8 6 TMCMB1V335(1)TRF 1.2 6 TMCMC1V475(1)TRF 1.6 6 TMCMC1V685(1)TRF 2.4 6 TMCMC1V106(1)TRF 3.5 8 TMCME1V106(1)TRF 3.5 8 TMCME1V156(1)TRF 5.3 8 TMCME1V226(1)TRF 7.7 8 Note • Part number definition: (1) Tolerance: For 10 % tolerance, specify “K”; for 20 % tolerance, change to “M” RECOMMENDED VOLTAGE DERATING GUIDELINES (for temperature below +85 °C) CAPACITOR VOLTAGE RATING OPERATING VOLTAGE 2.5 1.2 4.0 2.0 6.3 (7.0) 3.1 (3.5) 10 5.0 16 8.0 20 10.0 25 12.5 35 17.5 Note • For more information about recommended voltage derating see technical note www.vishay.com/doc?40246 Revision: 01-Apr-2021 Document Number: 40178 7 For technical questions, contact: polytech@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TMCM www.vishay.com Vishay Polytech POWER DISSIPATION CASE CODE A B C E MAXIMUM PERMISSIBLE POWER DISSIPATION AT +25 °C (W) IN FREE AIR 0.078 0.096 0.100 0.120 STANDARD PACKAGING QUANTITY CASE CODE A B C E UNITS PER 7" REEL 2000 2000 500 500 PERFORMANCE CHARACTERISTICS ITEM CONDITION POST TEST PERFORMANCE Specified initial value -55 °C +85 °C +125 °C - -10 % to 0 % 0 % to +10 % 0 % to +12 % 4 6 8 10 12 16 18 20 30 Refer to Standard Ratings table 9 10 12 14 16 20 34 36 60 7 8 10 12 14 18 20 22 30 9 10 12 14 16 20 22 24 40 - 1000 % specified initial value or less 1250 % specified initial value or less Capacitance change Temperature characteristics Measure the specified characteristics in each stage Dissipation factor (%) Leakage current Solder heat resistance Moisture resistance no load Solder dip: 260 °C ± 5 °C A, B case: 10 s ± 1 s C, E case: 5 s ± 0.5 s Reflow 260 °C, 10 s ± 1 s Leave at 40 °C and 90 % to 95 % RH for 500 h High temperature load 85 °C. The rated voltage is applied for 2000 h Thermal shock Leave at -55 °C, normal temperature, 125 °C, and normal temperature for 30 min, 3 min, 30 min, and 3 min. Repeat this operation 5 times running Moisture resistance load Leave at 40 °C and 90 % to 95 % RH. The rated voltage applied for 500 h Failure rate 85 °C. The rated voltage is applied through a protective resistor of 1 Ω/V Capacitance change Within ± 5 % of initial value Dissipation factor Shall not exceed initial specified value Leakage current Shall not exceed initial specified value Capacitance change Within ± 10 % of initial value Dissipation factor Shall not exceed initial specified value Leakage current Shall not exceed initial specified value Capacitance change Within ± 10 % of initial value Dissipation factor Shall not exceed initial specified value Leakage current Shall not exceed 125 % of initial specified value Capacitance change Within ± 10 % of initial value Dissipation factor Shall not exceed initial specified value Leakage current Shall not exceed initial specified value Capacitance change Within ± 10 % of initial value Dissipation factor Shall not exceed 150 % of initial specified value Leakage current Shall not exceed 200 % of initial specified value 1 %/1000 h Note • Test conditions per JIS C5101-1 Revision: 01-Apr-2021 Document Number: 40178 8 For technical questions, contact: polytech@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Molded Guide www.vishay.com Vishay Polytech Guide for Tantalum Solid Electrolyte Chip Capacitors INTRODUCTION Tantalum electrolytic capacitors are the preferred choice in applications where volumetric efficiency, stable electrical parameters, high reliability, and long service life are primary considerations. The stability and resistance to elevated temperatures of the tantalum / tantalum oxide / manganese dioxide system make solid tantalum capacitors an appropriate choice for today's surface mount assembly technology. Vishay Sprague has been a pioneer and leader in this field, producing a large variety of tantalum capacitor types for consumer, industrial, automotive, military, and aerospace electronic applications. Tantalum is not found in its pure state. Rather, it is commonly found in a number of oxide minerals, often in combination with Columbium ore. This combination is known as “tantalite” when its contents are more than one-half tantalum. Important sources of tantalite include Australia, Brazil, Canada, China, and several African countries. Synthetic tantalite concentrates produced from tin slags in Thailand, Malaysia, and Brazil are also a significant raw material for tantalum production. Electronic applications, and particularly capacitors, consume the largest share of world tantalum production. Other important applications for tantalum include cutting tools (tantalum carbide), high temperature super alloys, chemical processing equipment, medical implants, and military ordnance. Vishay Sprague is a major user of tantalum materials in the form of powder and wire for capacitor elements and rod and sheet for high temperature vacuum processing. Rating for rating, tantalum capacitors tend to have as much as three times better capacitance / volume efficiency than aluminum electrolytic capacitors. An approximation of the capacitance / volume efficiency of other types of capacitors may be inferred from the following table, which shows the dielectric constant ranges of the various materials used in each type. Note that tantalum pentoxide has a dielectric constant of 26, some three times greater than that of aluminum oxide. This, in addition to the fact that extremely thin films can be deposited during the electrolytic process mentioned earlier, makes the tantalum capacitor extremely efficient with respect to the number of microfarads available per unit volume. The capacitance of any capacitor is determined by the surface area of the two conducting plates, the distance between the plates, and the dielectric constant of the insulating material between the plates. COMPARISON OF CAPACITOR DIELECTRIC CONSTANTS DIELECTRIC e DIELECTRIC CONSTANT Air or vacuum 1.0 Paper 2.0 to 6.0 Plastic 2.1 to 6.0 Mineral oil 2.2 to 2.3 Silicone oil 2.7 to 2.8 Quartz 3.8 to 4.4 Glass 4.8 to 8.0 Porcelain 5.1 to 5.9 Mica 5.4 to 8.7 THE BASICS OF TANTALUM CAPACITORS Aluminum oxide Most metals form crystalline oxides which are non-protecting, such as rust on iron or black oxide on copper. A few metals form dense, stable, tightly adhering, electrically insulating oxides. These are the so-called “valve” metals and include titanium, zirconium, niobium, tantalum, hafnium, and aluminum. Only a few of these permit the accurate control of oxide thickness by electrochemical means. Of these, the most valuable for the electronics industry are aluminum and tantalum. Capacitors are basic to all kinds of electrical equipment, from radios and television sets to missile controls and automobile ignitions. Their function is to store an electrical charge for later use. Capacitors consist of two conducting surfaces, usually metal plates, whose function is to conduct electricity. They are separated by an insulating material or dielectric. The dielectric used in all tantalum electrolytic capacitors is tantalum pentoxide. Tantalum pentoxide compound possesses high-dielectric strength and a high-dielectric constant. As capacitors are being manufactured, a film of tantalum pentoxide is applied to their electrodes by means of an electrolytic process. The film is applied in various thicknesses and at various voltages and although transparent to begin with, it takes on different colors as light refracts through it. This coloring occurs on the tantalum electrodes of all types of tantalum capacitors. Tantalum pentoxide Revision: 21-Sep-2020 Ceramic 8.4 26 12 to 400K In the tantalum electrolytic capacitor, the distance between the plates is very small since it is only the thickness of the tantalum pentoxide film. As the dielectric constant of the tantalum pentoxide is high, the capacitance of a tantalum capacitor is high if the area of the plates is large:  where eA C = ------t C = capacitance e = dielectric constant A = surface area of the dielectric t = thickness of the dielectric Tantalum capacitors contain either liquid or solid electrolytes. In solid electrolyte capacitors, a dry material (manganese dioxide) forms the cathode plate. A tantalum lead is embedded in or welded to the pellet, which is in turn connected to a termination or lead wire. The drawings show the construction details of the surface mount types of tantalum capacitors shown in this catalog. Document Number: 40218 1 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Molded Guide www.vishay.com Vishay Polytech SOLID ELECTROLYTE TANTALUM CAPACITORS TANTALUM CAPACITORS FOR ALL DESIGN CONSIDERATIONS Solid electrolyte capacitors contain manganese dioxide, which is formed on the tantalum pentoxide dielectric layer by impregnating the pellet with a solution of manganous nitrate. The pellet is then heated in an oven, and the manganous nitrate is converted to manganese dioxide. Solid electrolyte designs are the least expensive for a given rating and are used in many applications where their very small size for a given unit of capacitance is of importance. Also important are their good low temperature performance characteristics and freedom from corrosive electrolytes. The pellet is next coated with graphite, followed by a layer of metallic silver, which provides a conductive surface between the pellet and the leadframe. Datasheets covering the various types and styles of capacitors for consumer and entertainment electronics and industry applications are available where detailed performance characteristics must be specified. Molded chip tantalum capacitor encases the element in plastic resins, such as epoxy materials. After assembly, the capacitors are tested and inspected to ensure long life and reliability. It offers excellent reliability and high stability for consumer and commercial electronics with the added feature of low cost. Surface mount designs of “Solid Tantalum” capacitors use lead frames as shown in the accompanying drawings. MOLDED CHIP CAPACITOR, ALL TYPES EXCEPT TMCTX / TMCJ Tantalum wire Supporter Silver adhesive Epoxy encapsulation Leadframe Solderable cathode termination Solderable anode termination Carbon / silver coating MnO2 Sintered tantalum MOLDED CHIP CAPACITOR WITH BUILT-IN FUSE, TYPE TMCTX Sintered tantalum Carbon / silver coating Supporter Tantalum wire Epoxy encapsulation Fusible ribbon Leadframe Solderable cathode termination Solderable anode termination MnO2 Silver adhesive MOLDED CHIP CAPACITOR 0603 SIZE, TYPE TMCJ Tantalum wire Silver adhesive Epoxy encapsulation Leadframe Solderable anode termination Solderable cathode termination Carbon / silver coating Revision: 21-Sep-2020 MnO2 Sintered tantalum Document Number: 40218 2 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Molded Guide www.vishay.com Vishay Polytech SOLID TANTALUM CAPACITORS - MOLDED CASE SERIES TMCS TMCM TMCR TMCU TMCP TMCJ PRODUCT IMAGE TYPE FEATURES Solid tantalum surface mount chip capacitors, molded case Standard industrial grade Standard industrial grade extended range Low ESR TEMPERATURE RANGE CAPACITANCE RANGE Low profile 0805 size 0603 size -55 °C to +125 °C 0.1 μF to 68 μF 0.47 μF to 470 μF 10 μF to 330 μF 0.1 μF to 220 μF 0.1 μF to 47 μF 0.68 μF to 22 μF 4 V to 35 V 2.5 V to 35 V 7 V to 35 V 2.5 V to 35 V 2.5 V to 25 V 2.5 V to 20 V VOLTAGE RANGE CAPACITANCE TOLERANCE ± 10 %, ± 20 % LEAKAGE CURRENT DISSIPATION FACTOR ± 20 % 0.01 CV or 0.5 μA, whichever is greater 4 % to 6 % 4 % to 30 % 6 % to 30 % 4 % to 30 % 6 % to 30 % 20 % A, B, C, E A, B, C, E B, C, E UA, UB P J CASE SIZES TERMINATION FINISH Case UA: 100 % tin Case UB: Ni / Pd / Au 100 % tin 100 % tin SOLID TANTALUM CAPACITORS - MOLDED CASE SERIES TMCTX TMCH THC PRODUCT IMAGE TYPE FEATURES Solid tantalum surface mount chip capacitors, molded case Built-in fuse TEMPERATURE RANGE CAPACITANCE RANGE VOLTAGE RANGE High reliability -55 °C to +125 °C DISSIPATION FACTOR CASE SIZES TERMINATION FINISH Revision: 21-Sep-2020 -55 °C to +150 °C 1.0 μF to 68 μF 0.1 μF to 100 μF 0.33 μF to 47 μF 10 V to 35 V 4 V to 35 V 10 V to 35 V CAPACITANCE TOLERANCE LEAKAGE CURRENT High reliability, high temperature +150 °C ± 10 %, ± 20 % 0.01 CV or 0.5 μA, whichever is greater 0.005 CV or 0.25 μA, whichever is greater 4 % to 6 % 4 % to 8 % 4 % to 6 % B, C, E, F A, B, C, E, P A, B, C, E 100 % tin Document Number: 40218 3 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Molded Guide www.vishay.com Vishay Polytech PLASTIC TAPE AND REEL PACKAGING DIMENSIONS in millimeters E A B C Label D W CASE CODE TAPE WIDTH A+0/-3 B+1/0 C ± 0.2 D ± 0.5 E ± 0.5 W ± 0.3 J, P, A, UA, B, UB 8 C, E, F 12 Ø 180 Ø 60 Ø 13 Ø 21 2.0 9.0 13.0 TAPE SIZE in millimeters Pocket Perforation E Ø 1.5 + 0.10 F B W A P1 t Direction of tape flow 4.0 ± 0.1 2.0 ± 0.1 Inserting direction Perforation Marking side (upper) Mounting terminal side (lower) Symbol: R CASE CODE J P A UA B UB C E F A ± 0.2 1.0 1.4 1.9 1.9 3.1 3.1 3.7 4.8 6.2 Revision: 21-Sep-2020 B ± 0.2 1.8 2.2 3.5 3.5 3.8 3.8 6.3 7.7 7.5 W ± 0.3 8.0 8.0 8.0 8.0 8.0 8.0 12.0 12.0 12.0 F ± 0.1 3.5 3.5 3.5 3.5 3.5 3.5 5.5 5.5 5.5 E ± 0.1 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.75 1.75 P1 ± 0.1 4.0 4.0 4.0 4.0 4.0 4.0 8.0 8.0 8.0 tmax. 1.3 1.6 2.5 1.7 2.5 1.7 3.1 3.4 4.1 Document Number: 40218 4 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Molded Guide www.vishay.com Vishay Polytech RECOMMENDED REFLOW PROFILES Capacitors should withstand reflow profile as per J-STD-020 standard TEMPERATURE (°C) Tp TL Ts max. TC - 5 °C tp Max. ramp-up rate = 3 °C/s Max. ramp-down rate = 6 °C/s tL Preheat area Ts min. ts 25 Time 25 °C to peak TIME (s) PROFILE FEATURE Preheat / soak Temperature min. (Ts min.) Temperature max. (Ts max.) Time (ts) from (Ts min. to Ts max.) Ramp-up Ramp-up rate (TL to Tp) Liquidus temperature (TL) Time (tL) maintained above TL LEAD (Pb)-FREE ASSEMBLY 130 °C 160 °C 60 s to 120 s 3 °C/s max. 200 °C 50 s max. Peak package body temperature (Tp) max. Depends on case size - see table below Time (tp) within 5 °C of the peak maximum temperature Ramp-down rate (Tp to TL) Time from 25 °C to peak temperature 10 s max. 6 °C/s max. 8 min max. PEAK PACKAGE BODY TEMPERATURE (Tp) PEAK PACKAGE BODY TEMPERATURE (Tp) CASE CODE LEAD (Pb)-FREE PROCESS J, P, UA, A, UB, B, C 260 °C E, F 250 °C PAD DIMENSIONS in millimeters L Capacitor Pattern Y CASE / DIMENSIONS J P UA, A UB, B C E F Revision: 21-Sep-2020 CAPACITOR SIZE L W 1.6 0.8 2.0 1.25 3.2 1.6 3.5 2.8 5.8 3.2 7.3 4.3 7.3 5.8 X W G Z G (max.) 0.7 0.5 1.1 1.4 2.9 4.1 4.1 PAD DIMENSIONS Z (min.) X (min.) 2.5 1.0 2.6 1.2 3.8 1.5 4.1 2.7 6.9 2.7 8.2 2.9 8.2 4.0 Y (Ref.) 0.9 1.05 1.35 1.35 2.0 2.05 2.05 Document Number: 40218 5 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Molded Guide www.vishay.com Vishay Polytech GUIDE TO APPLICATION 1. AC Ripple Current: the maximum allowable ripple current shall be determined from the formula: I R MS = 4. P -----------R ESR where, P= 2. At 85 °C: 5 % of the rated voltage or 0.5 V, whichever is smaller. power dissipation in W at +25 °C as given in the tables in the product datasheets. RESR = the capacitor equivalent series resistance at the specified frequency. 5. Mounting Precautions: 5.1 Limit Pressure on Capacitor Installation with Mounter: pressure must not exceed 4.9 N with a tool end diameter of 1.5 mm when applied to the capacitors using an absorber, centering tweezers, or similar (maximum permitted pressurization time: 5 s). An excessively low absorber setting position would result in not only the application of undue force to the capacitors but capacitor and other component scattering, circuit board wiring breakage, and / or cracking as well, particularly when the capacitors are mounted together with other chips having a height of 1 mm or less. AC Ripple Voltage: the maximum allowable ripple voltage shall be determined from the formula: P V R MS = Z -----------R ESR or, from the formula: V RMS = I RM S x Z where, P= power dissipation in W at +25 °C as given in the tables in the product datasheets. RESR = The capacitor equivalent series resistance at the specified frequency. Z= 2.1 The capacitor impedance at the specified frequency. The tantalum capacitors must be used in such a condition that the sum of the working voltage and ripple voltage peak values does not exceed the rated voltage as shown in figure below. Reverse Voltage: the capacitors are not intended for use with reverse voltage applied. If the application of a reverse voltage is unavoidable, it must not exceed the following values: At 25 °C: 10 % of the rated voltage or 1 V, whichever is smaller. 5.2 Flux Selection 5.2.1 Select a flux that contains a minimum of chlorine and amine. 5.2.2 After flux use, the chlorine and amine in the flux remain must be removed. 5.3 Cleaning After Mounting: the following solvents are usable when cleaning the capacitors after mounting. Never use a highly active solvent. • Halogen organic solvent (HCFC225, etc.) • Alcoholic solvent (IPA, ethanol, etc.) Voltage Ripple voltage Rated voltage Operating voltage Working voltage Time (s) 3. Temperature Derating: power dissipation is affected by the heat sinking capability of the mounting surface. If these capacitors are to be operated at temperatures above +25 °C, the permissible ripple current (or voltage) shall be calculated using the derating coefficient as shown in the table below: MAXIMUM RIPPLE CURRENT TEMPERATURE DERATING FACTOR TEMPERATURE TMC  25 °C 1.0 85 °C 0.9 105 °C 0.65 125 °C 0.4 Revision: 21-Sep-2020 • Petroleum solvent, alkali saponifying agent, water, etc. Circuit board cleaning must be conducted at a temperature of not higher than 50 °C and for an immersion time of not longer than 30 minutes. When an ultrasonic cleaning method is used, cleaning must be conducted at a frequency of 48 kHz or lower, at a vibrator output of 0.02 W/cm3, at a temperature of not higher than 40 °C, and for a time of 5 minutes or shorter. Notes • Care must be exercised in cleaning process so that the mounted capacitor will not come into contact with any cleaned object or the like or will not get rubbed by a stiff brush or similar. If such precautions are not taken particularly when the ultrasonic cleaning method is employed, terminal breakage may occur • When performing ultrasonic cleaning under conditions other than stated above, conduct adequate advance checkout Document Number: 40218 6 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2023 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2023 1 Document Number: 91000