TMPG06-16-E3/54

TMPG06-6.8 thru TMPG06-43A Vishay General Semiconductor Automotive Transient Voltage Suppressors High Temperature Stability & High Reliability Conditions Major Ratings and Characteristics V(BR) 6.8 V to 43 V PPPM 400 W PD 1.0 W IFSM 40 A Tj max. 185 °C ted* n e t Pa * Patent #'s 4,980,315 5,166,769 5,278,094 Features Case Style MPG06 Typical Applications PAR® • Patented construction • Available in Unidirectional polarity only • 400 W peak pulse power capability with a 10/1000 µs waveform, repetitive rate (duty cycle): 0.01 % • Excellent clamping capability • Very fast response time • Low incremental surge resistance • Typical ID less than 1.0 µA above 10 V rating • Solder Dip 260 °C, 40 seconds • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC Use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting on ICs, MOSFET, signal lines of sensor units for consumer, computer, industrial, automotive and Telecommunication. Mechanical Data Case: MPG06, molded epoxy over passivated junction Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002B and JESD22-B102D E3 suffix for commercial grade, HE3 suffix for high reliability grade (AEC Q101 qualified) Polarity: Color band denotes cathode end Maximum Ratings (TA = 25 °C unless otherwise noted) Parameter Symbol Limit Unit PPPM Minimum 400 W IPPM see next table A Power dissipation on infinite heatsink at TL = 75 °C (Fig. 5) PD 1.0 W Peak forward surge current 8.3 ms single half sine-wave (2) IFSM 40 A VF 3.5 V TJ, TSTG - 65 to + 185 °C Peak power dissipation with a 10/1000 µs waveform (1) (Fig. 1) Peak pulse current with a 10/1000 µs waveform (1)(2) (Fig. 3) Maximum instatntaneous forward voltage at 25 A (2) Operating junction and storage temperature range Notes: (1) Non-repetitive current pulse, per Fig. 3 and derated above TA = 25 °C per Fig. 2 (2) Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum Document Number 88404 22-Dec-05 www.vishay.com 1 TMPG06-6.8 thru TMPG06-43A Vishay General Semiconductor Electrical Characteristics (TA = 25 °C unless otherwise noted) Maximum Breakdown Voltage V(BR)(1) at IT (V) Device Type MIN MAX Test Current IT (mA) Stand-off Voltage VWM (V) Maximum Reverse Leakage at VWM ID (µA) Reverse Leakage at VWM TJ = 150 °C ID (µA) Peak Pulse Current IPPM(2) (A) Maximum Clamping Voltage at lPPM VC (Volts) Maximum Temp. Coefficient of V(BR) (% / °C) TMPG06-6.8 6.12 7.48 10.0 5.50 300 1000 27.8 10.8 0.057 TMPG06-6.8A 6.45 7.14 10.0 5.80 300 1000 28.6 10.5 0.057 TMPG06-7.5 6.75 8.25 10.0 6.05 150 500 25.6 11.7 0.060 TMPG06-7.5A 7.13 7.88 10.0 6.40 150 500 26.5 11.3 0.061 TMPG06-8.2 7.38 9.02 10.0 6.63 50.0 200 24.0 12.5 0.065 TMPG06-8.2A 7.79 8.61 10.0 7.02 50.0 200 24.8 12.1 0.065 TMPG06-9.1 8.19 10.0 1.0 7.37 10.0 50.0 21.7 13.8 0.068 TMPG06-9.1A 8.65 9.55 1.0 7.78 10.0 50.0 22.4 13.4 0.068 TMPG06-10 9.00 11.0 1.0 8.10 5.0 20.0 26.7 15.0 0.073 TMPG06-10A 9.50 10.5 1.0 8.55 5.0 20.0 27.6 14.5 0.073 TMPG06-11 9.90 12.1 1.0 8.92 2.0 10.0 24.7 16.2 0.075 TMPG06-11A 10.5 11.6 1.0 9.40 2.0 10.0 25.6 15.6 0.075 TMPG06-12 10.8 13.2 1.0 9.72 1.0 5.0 23.1 17.3 0.076 TMPG06-12A 11.4 12.6 1.0 10.2 1.0 5.0 24.0 16.7 0.078 TMPG06-13 11.7 14.3 1.0 10.5 1.0 5.0 21.1 19.0 0.081 TMPG06-13A 12.4 13.7 1.0 11.1 1.0 5.0 22.0 18.2 0.081 TMPG06-15 13.5 16.3 1.0 12.1 1.0 5.0 18.2 22.0 0.084 TMPG06-15A 14.3 15.8 1.0 12.8 1.0 5.0 18.9 21.2 0.084 TMPG06-16 14.4 17.6 1.0 12.9 1.0 5.0 17.0 23.5 0.086 TMPG06-16A 15.2 16.8 1.0 13.6 1.0 5.0 17.8 22.5 0.086 TMPG06-18 16.2 19.8 1.0 14.5 1.0 5.0 15.1 26.5 0.088 TMPG06-18A 17.1 18.9 1.0 15.3 1.0 5.0 15.9 25.5 0.088 TMPG06-20 18.0 22.0 1.0 16.2 1.0 5.0 13.7 29.1 0.090 TMPG06-20A 19.0 21.0 1.0 17.0 1.0 5.0 14.4 27.7 0.090 TMPG06-22 19.8 24.2 1.0 17.8 1.0 5.0 12.5 31.9 0.092 TMPG06-22A 20.9 23.1 1.0 18.8 1.0 5.0 13.1 30.6 0.092 TMPG06-24 21.6 26.4 1.0 19.4 1.0 5.0 11.5 34.2 0.094 TMPG06-24A 22.8 25.2 1.0 20.5 1.0 5.0 12.0 33.2 0.094 TMPG06-27 24.3 29.7 1.0 21.8 1.0 5.0 10.2 39.1 0.096 TMPG06-27A 25.7 28.4 1.0 23.1 1.0 5.0 10.7 37.5 0.096 TMPG06-30 27.0 33.0 1.0 24.3 1.0 5.0 9.2 43.5 0.097 TMPG06-30A 28.5 31.5 1.0 25.6 1.0 5.0 9.7 41.4 0.097 TMPG06-33 29.7 36.3 1.0 26.8 1.0 5.0 8.4 47.7 0.098 TMPG06-33A 31.4 34.7 1.0 28.2 1.0 5.0 8.8 45.7 0.098 TMPG06-36 32.4 39.6 1.0 29.1 1.0 5.0 7.7 52.0 0.099 TMPG06-36A 34.2 37.8 1.0 30.8 1.0 5.0 8.0 49.9 0.099 TMPG06-39 35.1 42.9 1.0 31.6 1.0 5.0 7.1 56.4 0.100 TMPG06-39A 37.1 41.0 1.0 33.3 1.0 5.0 7.4 53.9 0.100 TMPG06-43 38.7 47.3 1.0 34.8 1.0 5.0 6.5 61.9 0.101 TMPG06-43A 40.9 45.2 1.0 36.8 1.0 5.0 6.7 59.3 0.101 Notes: (1) Pulse test: tp ≤ 50 ms (2) Surge current waveform per Fig. 3 and derated per Fig. 2 (3) All terms and symbols are consistent with ANSI/IEEE C62.35 www.vishay.com 2 Document Number 88404 22-Dec-05 TMPG06-6.8 thru TMPG06-43A Vishay General Semiconductor Ordering Information Preferred P/N Unit Weight (g) Preferred Package Code Base Quantity Delivery Mode 0.218 54 5500 13" Diameter Paper Tape & Reel TMPG06-6.8A-E3/54 Ratings and Characteristics Curves (TA = 25 °C unless otherwise specified) 150 Non-repetitive Pulse Waveform shown in Fig. 3 TA = 25 °C 10 TMPG06-10 - TMPG06-43A 1.0 TMPG06-6.8 - TMPG06-9.1A IPPM - Peak Pulse Current, % IRSM PPPM - Peak Pulse Power (kW) 100 TJ = 25 °C Pulse Width (td) is defined as the point where the peak current decays to 50 % of IPPM tr = 10 µsec. Peak Value IPPM 100 Half Value - IPP 2 IPPM 50 10/1000 µsec. Waveform as defined by R.E.A. td 0.1 0.1 µs 0 1.0 µs 10 µs 100 µs 1.0 ms 0 10 ms 2.0 3.0 4.0 Figure 3. Pulse Waveform 100 10000 CJ, Junction Capacitance (pF) Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage, % Figure 1. Peak Pulse Power Rating Curve 75 50 25 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p Measured at Zero Bias 1000 100 Measured at Stand-off Voltage VWM 10 0 0 25 50 75 100 125 150 175 200 TJ - Initial Temperature (°C) Figure 2. Pulse Power or Current versus Initial Junction Temperature Document Number 88404 22-Dec-05 1.0 t - Time (ms) td - Pulse Width (sec.) 1.0 10 100 200 V(BR) - Breakdown Voltage (V) Figure 4. Typical Junction Capacitance www.vishay.com 3 TMPG06-6.8 thru TMPG06-43A Vishay General Semiconductor 100 60 Hz Resistive or Inductive Load 0.75 0.50 L = 0.375" (9.5 mm) Lead Lengths 0.25 TJ = 75 °C 8.3 ms Single Half Sine-Wave Peak Forward Surge Current (A) PD, Power Dissipation (W) 1.00 10 0 0 25 50 75 100 125 150 175 1 200 10 100 Number of Cycles at 60 Hz TL - Lead Temperature (°C) Figure 5. Power Derating Curve Figure 6. Maximum Non-Repetitive Forward Surge Current Package outline dimensions in inches (millimeters) Case Style MPG06 0.100 (2.54) 0.090 (2.29) DIA 1.0 (25.4) MIN. 0.125 (3.18) 0.115 (2.92) 1.0 (25.4) MIN. 0.025 (0.635) 0.023 (0.584) DIA. www.vishay.com 4 Document Number 88404 22-Dec-05 Legal Disclaimer Notice Vishay Notice Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. Document Number: 91000 Revision: 08-Apr-05 www.vishay.com 1