TMPG06-39AHE3/54

TMPG06-10A thru TMPG06-43A www.vishay.com Vishay General Semiconductor PAR® Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions FEATURES • Available in unidirectional polarity only • 400 W peak pulse power capability with a 10/1000 μs waveform, repetitive rate (duty cycle): 0.01 % • Excellent clamping capability • Very fast response time MPG06 • Low incremental resistance • Solder dip 275 °C max. 10 s, per JESD 22-B106 • AEC-Q101 qualified • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS PRIMARY CHARACTERISTICS Use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting on ICs, MOSFET, signal lines of sensor units for consumer, computer, industrial, automotive, and telecommunication. VBR 10 V to 43 V VWM 8.55 V to 36.8 V PPPM 400 W PD 1.0 W MECHANICAL DATA IFSM 40 A TJ max. 185 °C Case: MPG06, molded epoxy over passivated junction Molding compound meets UL 94 V-0 flammability rating Polarity Unidirectional Package MPG06 Base P/NHE3_X - RoHS-compliant, AEC-Q101 qualified (“X” denotes revision code e.g. A, B, ...) Terminals: matte tin plated leads, solderable J-STD-002 and JESD 22-B102 HE3 suffix meets JESD 201 class 2 whisker test per Polarity: color band denotes cathode end MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL VALUE UNIT Peak pulse power dissipation with a 10/1000 μs waveform (1) (fig. 1) PPPM 400 W Peak pulse current with a 10/1000 μs waveform (1)(2) (fig. 3) IPPM See next table A Power dissipation on infinite heatsink at TL = 75 °C (fig. 5) PD 1.0 W Peak forward surge current 8.3 ms single half sine-wave (2) IFSM 40 A Maximum instantaneous forward voltage at 25 A (2) VF 3.5 V Operating junction and storage temperature range TJ, TSTG -65 to +185 °C Notes (1) Non-repetitive current pulse, per fig. 3 and derated above T = 25 °C per fig. 2 A (2) Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum Revision: 17-Sep-2021 Document Number: 88404 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TMPG06-10A thru TMPG06-43A www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) BREAKDOWN VOLTAGE VBR AT IT (1) (V) MAXIMUM REVERSE REVERSE LEAKAGE LEAKAGE AT VWM AT VWM TJ = 150 °C ID (μA) (μA) MAXIMUM PEAK PULSE CURRENT IPPM (2) (A) MAXIMUM CLAMPING VOLTAGE AT IPPM VC (V) MAXIMUM TEMPERATURE COEFFICIENT OF VBR (%/°C) MIN. MAX. TEST CURREN T IT (mA) TMPG06-10A 9.50 10.5 1.0 8.55 5.0 20.0 27.6 14.5 0.073 TMPG06-11A 10.5 11.6 1.0 9.40 2.0 10.0 25.6 15.6 0.075 TMPG06-12A 11.4 12.6 1.0 10.2 1.0 5.0 24.0 16.7 0.078 TMPG06-13A 12.4 13.7 1.0 11.1 1.0 5.0 22.0 18.2 0.081 TMPG06-15A 14.3 15.8 1.0 12.8 1.0 5.0 18.9 21.2 0.084 TMPG06-16A 15.2 16.8 1.0 13.6 1.0 5.0 17.8 22.5 0.086 TMPG06-18A 17.1 18.9 1.0 15.3 1.0 5.0 15.9 25.5 0.088 TMPG06-20A 19.0 21.0 1.0 17.0 1.0 5.0 14.4 27.7 0.090 TMPG06-22A 20.9 23.1 1.0 18.8 1.0 5.0 13.1 30.6 0.092 TMPG06-24A 22.8 25.2 1.0 20.5 1.0 5.0 12.0 33.2 0.094 TMPG06-27A 25.7 28.4 1.0 23.1 1.0 5.0 10.7 37.5 0.096 TMPG06-30A 28.5 31.5 1.0 25.6 1.0 5.0 9.7 41.4 0.097 TMPG06-33A 31.4 34.7 1.0 28.2 1.0 5.0 8.8 45.7 0.098 TMPG06-36A 34.2 37.8 1.0 30.8 1.0 5.0 8.0 49.9 0.099 TMPG06-39A 37.1 41.0 1.0 33.3 1.0 5.0 7.4 53.9 0.100 TMPG06-43A 40.9 45.2 1.0 36.8 1.0 5.0 6.7 59.3 0.101 DEVICE TYPE STAND-OFF VOLTAGE VWM (V) Notes (1) (2) (3) Pulse test: tp ≤ 50 ms Surge current waveform per fig. 3 and derated per fig. 2 All terms and symbols are consistent with ANSI/IEEE CA62.35 ORDERING INFORMATION (Example) PREFERRED PIN TMPG06-10AHE3_A/C (1) UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE 0.218 C 5500 13" diameter paper tape and reel Note (1) AEC-Q101 qualified Revision: 17-Sep-2021 Document Number: 88404 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TMPG06-10A thru TMPG06-43A www.vishay.com Vishay General Semiconductor RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 10 000 Non-Repetitive Pulse Waveform shown in Fig. 3 TA = 25 °C 10 1.0 0.1 0.1 µs TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p Measured at Zero Bias 1000 100 Measured at Stand-Off Voltage VWM 10 1.0 µs 10 µs 100 µs 1.0 ms 10 ms 10 100 td - Pulse Width (s) VBR - Breakdown Voltage (V) Fig. 1 - Peak Pulse Power Rating Curve Fig. 4 - Typical Junction Capacitance 1.00 100 PD - Power Dissipation (W) Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage, % CJ - Junction Capacitance (pF) PPPM - Peak Oulse Power (kW) 100 75 50 25 60 Hz Resistive or Inductive Load 0.75 0.50 L = 0.375" (9.5 mm) Lead Lengths 0.25 0 0 0 25 50 75 100 125 150 175 0 200 25 50 75 100 125 150 TJ - Initial Temperature (°C) TL - Lead Temperature (°C) Fig. 2 - Pulse Power or Current vs. Initial Junction Temperature Fig. 5 - Power Derating Curve Peak Value IPPM 100 Half Value - IPP IPPM 2 50 200 100 TJ = 25 °C Pulse Width (td) is defined as the Point where the Peak Current decays to 50 % of IPPM tr = 10 µs TJ = 75 °C 8.3 ms Single Half Sine-Wave Peak Forward Surge Current (A) IPPM - Peak Pulse Current, % IRSM 150 175 10/1000 µs Waveform as defined by R.E.A. td 0 10 0 1.0 2.0 3.0 4.0 1 10 100 t - Time (ms) Number of Cycles at 60 Hz Fig. 3 - Pulse Waveform Fig. 6 - Maximum Non-Repetitive Forward Surge Current Revision: 17-Sep-2021 Document Number: 88404 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TMPG06-10A thru TMPG06-43A www.vishay.com Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) MPG06 0.100 (2.54) 0.090 (2.29) DIA. 1.0 (25.4) MIN. 0.125 (3.18) 0.115 (2.92) 1.0 (25.4) MIN. 0.026 (0.66) 0.023 (0.584) DIA. Revision: 17-Sep-2021 Document Number: 88404 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2023 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2023 1 Document Number: 91000