TPC27AHM3_A/H

TPC6.8A thru TPC51A www.vishay.com Vishay General Semiconductor Surface Mount PAR® Transient Voltage Suppressors Uni-directional 1500 W TVS in TO-277 (SMPC) Package FEATURES eSMP ® Series • Junction passivation optimized design passivated anisotropic rectifier technology A Available • TJ = 185 °C capability suitable for high reliability and automotive requirement • Very low profile - typical height of 1.1 mm 1 • Ideal for automated placement • Uni-direction only 2 TO-277A (SMPC) • Excellent clamping capability A Cathode 1 • Low incremental surge resistance Anode Cathode 2 • Very fast response time • Meets MSL level 1, per J-STD-020 • AEC-Q101 qualified PRIMARY CHARACTERISTICS VWM 5.8 V to 43.6 V VBR 6.8 V to 51 V PPPM 1500 W TJ max. 185 °C Polarity Uni-directional Package TO-277A (SMPC) • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 MECHANICAL DATA Case: TO-277A (SMPC) Molding compound meets UL 94 V-0 flammability rating Base P/NHM3_X - halogen-free, RoHS-compliant, and AEC-Q101 qualified (“X” denotes revision code e.g. A, B, ...) TYPICAL APPLICATIONS Use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting on ICs, MOSFET, signal lines of sensor units for consumer, computer, industrial, automotive, and telecommunication. Terminals: matte tin plated leads, solderable J-STD-002 and JESD 22-B102 HM3 suffix meets JESD 201 class 2 whisker test per MAXIMUM RATINGS (TA = 25 °C, unless otherwise noted) PARAMETER SYMBOL VALUE UNIT Peak power dissipation with a 10/1000 μs waveform (fig. 3) (1)(2) PPPM 1500 W (1) IPPM See next table A IFSM 200 A Peak power pulse current with a 10/1000 μs waveform (fig. 1) Peak forward surge current 8.3 ms single half sine-wave (2) Maximum instantaneous forward voltage at 100 A (3) Operating junction and storage temperature range VF 3.5 V TJ, TSTG -65 to +185 °C Notes (1) Non-repetitive current pulse, per fig. 3 and derated above T = 25 °C per fig. 2 A (2) Measured on 8.3 ms single half sine-wave, or equivalent square wave, duty cycle = 4 pulses per minute maximum (3) Pulse test: 300 μs pulse width, 1 % duty cycle Revision: 04-Nov-16 Document Number: 89056 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TPC6.8A thru TPC51A www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C, unless otherwise noted) DEVICE TYPE DEVICE MARKING CODE BREAKDOWN VOLTAGE VBR (1) AT IT (V) MIN. MAX. TEST CURRENT IT (mA) STAND-OFF VOLTAGE VWM (V) MAXIMUM REVERSE LEAKAGE AT VWM IR (μA) MAXIMUM REVERSE LEAKAGE AT VWM TJ = 150 °C ID (μA) MAXIMUM PEAK PULSE SURGE CURRENT IPPM (2) (A) MAXIMUM CLAMPING VOLTAGE AT IPPM VC (V) TPC6.8A DEP 6.45 7.14 10 5.80 1500 10 000 143 10.5 TPC7.5A DGP 7.13 7.88 10 6.40 500 5000 133 11.3 TPC8.2A DKP 7.79 8.61 10 7.02 200 2000 124 12.1 TPC9.1A DMP 8.65 9.55 1.0 7.78 50 500 112 13.4 TPC10A DPP 9.5 10.5 1.0 8.55 20 200 103 14.5 TPC11A DRP 10.5 11.6 1.0 9.40 5.0 50 96.2 15.6 TPC12A DTP 11.4 12.6 1.0 10.2 2.0 10 89.8 16.7 TPC13A DVP 12.4 13.7 1.0 11.1 2.0 10 82.4 18.2 TPC15A DXP 14.3 15.8 1.0 12.8 1.0 10 70.8 21.2 TPC16A DZP 15.2 16.8 1.0 13.6 1.0 10 66.7 22.5 TPC18A EEP 17.1 18.9 1.0 15.3 1.0 10 59.5 25.2 TPC20A EGP 19.0 21.0 1.0 17.1 1.0 10 54.2 27.7 TPC22A EKP 20.9 23.1 1.0 18.8 1.0 10 49.0 30.6 TPC24A EMP 22.8 25.2 1.0 20.5 1.0 10 45.2 33.2 TPC27A EPP 25.7 28.4 1.0 23.1 1.0 10 40.0 37.5 TPC30A ERP 28.5 31.5 1.0 25.6 1.0 10 36.2 41.4 TPC33A ETP 31.4 34.7 1.0 28.2 1.0 10 32.8 45.7 TPC36A EVP 34.2 37.8 1.0 30.8 1.0 15 30.1 49.9 TPC39A EXP 37.1 41.0 1.0 33.3 1.0 15 27.8 53.9 TPC43A EZP 40.9 45.2 1.0 36.8 1.0 20 25.3 59.3 TPC47A FEP 44.7 49.4 1.0 40.2 1.0 20 23.1 64.8 TPC51A FGP 48.5 53.6 1.0 43.6 1.0 20 21.4 70.1 Notes (1) V BR measured after IT applied for 300 μs, IT = square wave pulse or equivalent (2) Surge current waveform per fig. 3 and derated per fig. 2 (3) All terms and symbols are consistent with ANSI/IEEE C62.35 ORDERING INFORMATION (Example) PREFERRED P/N TPC10AHM3_A/H (1) TPC10AHM3_A/I (1) UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE 0.10 H 1500 7" diameter plastic tape and reel 0.10 I 6500 13" diameter plastic tape and reel Note (1) Automotive grade Revision: 04-Nov-16 Document Number: 89056 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TPC6.8A thru TPC51A www.vishay.com Vishay General Semiconductor RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C, unless otherwise noted) PPPM - Peak Power (kW) TA = 25 °C Non-Repetitive Pulse Waveform shown in Fig. 3 10 1 Junction Capacitance (pF) 10 000 100 VR, measured at Zero Bias VR measured at Stand-Off Voltage, VWM 1000 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p 100 0.1 0.1 µs 1.0 µs 10 µs 100 µs 1.0 ms 1 10 ms 10 100 VBR - Breakdown Voltage (V) td - Pulse Width (s) Fig. 1 - Peak Pulse Power Rating Curve Fig. 4 - Typical Junction Capacitance Transient Thermal Impedance (°C/W) Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage (%) 100 100 75 50 25 10 1 RthJA, by mounted on recommended PCB 2 oz. area 0.1 0.01 0 50 0 100 150 200 TJ - Initial Temperature (°C) 0.1 1 10 100 1000 Tp - Pulse Duration (s) Fig. 5 - Typical Transient Thermal Impedance Fig. 2 - Pulse Power or Current vs. Initial Junction Temperature IPPM - Peak Pulse Current, % IRSM 150 TJ = 25 °C Pulse Width (td) is defined as the Point where the Peak Current decays to 50 % of IPPM tr = 10 µs Peak Value IPPM 100 Half Value - IPP IPPM 2 50 10/1000 µs Waveform as defined by R.E.A. td 0 0 1.0 2.0 3.0 4.0 t - Time (ms) Fig. 3 - Pulse Waveform Revision: 04-Nov-16 Document Number: 89056 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TPC6.8A thru TPC51A www.vishay.com Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) TO-277A (SMPC) 0.187 (4.75) 0.175 (4.45) 0.016 (0.40) 0.006 (0.15) A 0.262 (6.65) 0.250 (6.35) 0.242 (6.15) 0.238 (6.05) 2 1 0.047 (1.20) 0.039 (1.00) 0.171 (4.35) 0.167 (4.25) 0.146 (3.70) 0.134 (3.40) Mounting Pad Layout 0.087 (2.20) 0.075 (1.90) 0.189 (4.80) MIN. 0.189 (4.80) 0.173 (4.40) 0.186 (4.72) MIN. 0.268 (6.80) 0.155 (3.94) NOM. 0.030 (0.75) NOM. 0.049 (1.24) 0.037 (0.94) 0.050 (1.27) MIN. 0.084 (2.13) NOM. 0.053 (1.35) 0.041 (1.05) 0.041 (1.04) 0.055 (1.40) MIN. Conform to JEDEC® TO-277A Revision: 04-Nov-16 Document Number: 89056 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer  ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Revision: 13-Jun-16 1 Document Number: 91000