TPC6.8A thru TPC51A
www.vishay.com
Vishay General Semiconductor
Surface Mount PAR® Transient Voltage Suppressors
Unidirectional 1500 W TVS in SMPC (TO-277) Package
eSMP Series
FEATURES
• Junction
passivation
optimized
design
passivated anisotropic rectifier technology
A
Available
• TJ = 185 °C capability suitable for high reliability
and automotive requirement
1
• Very low profile - typical height of 1.1 mm
• Ideal for automated placement
2
• Unidirection only
TO-277A (SMPC)
• Excellent clamping capability
A
Cathode 1
Anode
Cathode 2
• Low incremental surge resistance
• Very fast response time
• Meets MSL level 1, per J-STD-020
• AEC-Q101 qualified
LINKS TO ADDITIONAL RESOURCES
3D 3D
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
TYPICAL APPLICATIONS
3D Models
PRIMARY CHARACTERISTICS
VWM
5.8 V to 43.6 V
VBR
6.8 V to 51 V
PPPM
1500 W
TJ max.
185 °C
Polarity
Unidirectional
Package
SMPC (TO-277A)
Use in sensitive electronics protection against voltage
transients induced by inductive load switching and lighting
on ICs, MOSFET, signal lines of sensor units for consumer,
computer, industrial, automotive, and telecommunication.
MECHANICAL DATA
Case: SMPC (TO-277A)
Molding compound meets UL 94 V-0 flammability rating
Base P/NHM3_X - halogen-free, RoHS-compliant, and
AEC-Q101 qualified (“X” denotes revision code e.g. A, B, ...)
Terminals: matte tin plated leads, solderable
J-STD-002 and JESD 22-B102
HM3 suffix meets JESD 201 class 2 whisker test
per
MAXIMUM RATINGS (TA = 25 °C, unless otherwise noted)
PARAMETER
SYMBOL
VALUE
UNIT
Peak power dissipation with a 10/1000 μs waveform (fig. 3) (1)(2)
PPPM
1500
W
Peak power pulse current with a 10/1000 μs waveform (fig. 1) (1)
IPPM
See next table
A
Peak forward surge current 8.3 ms single half sine-wave (2)
IFSM
200
A
Maximum instantaneous forward voltage at 100 A (3)
Operating junction and storage temperature range
VF
3.5
V
TJ, TSTG
-65 to +185
°C
Notes
(1) Non-repetitive current pulse, per fig. 3 and derated above T = 25 °C per fig. 2
A
(2) Measured on 8.3 ms single half sine-wave, or equivalent square wave, duty cycle = 4 pulses per minute maximum
(3) Pulse test: 300 μs pulse width, 1 % duty cycle
Revision: 19-Apr-2022
Document Number: 89056
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TPC6.8A thru TPC51A
www.vishay.com
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TA = 25 °C, unless otherwise noted)
DEVICE
TYPE
DEVICE
MARKING
CODE
MAXIMUM MAXIMUM MAXIMUM
TYPICAL
STAND-OF MAXIMUM
TEST
REVERSE
PEAK
CLAMPIN
TEMP.
F
REVERSE
CURREN
LEAKAGE
PULSE
G
COEFFICIE
VOLTAGE LEAKAGE
T
AT VWM
SURGE
VOLTAGE NT OF VBR (3)
VWM
AT VWM
IT
AT IPPM
αT
TJ = 150 °C CURRENT
MAX.
(mA)
(V)
IR (μA)
IPPM (2) (A)
(%/°C)
ID (μA)
VC (V)
BREAKDOWN
VOLTAGE
VBR (1) AT IT (V)
MIN.
NOM.
6.45
6.80
TPC6.8A
DEP
7.14
10
5.80
1500
10 000
143
10.5
0.047
TPC7.5A
DGP
7.13
7.50
7.88
10
6.40
500
5000
133
11.3
0.052
TPC8.2A
DKP
7.79
8.20
8.61
10
7.02
200
2000
124
12.1
0.056
TPC9.1A
DMP
8.65
9.10
9.55
1.0
7.78
50
500
112
13.4
0.060
TPC10A
DPP
9.5
10.0
10.5
1.0
8.55
20
200
103
14.5
0.064
TPC11A
DRP
10.5
11.0
11.6
1.0
9.40
5.0
50
96.2
15.6
0.067
TPC12A
DTP
11.4
12.0
12.6
1.0
10.2
2.0
10
89.8
16.7
0.070
TPC13A
DVP
12.4
13.0
13.7
1.0
11.1
2.0
10
82.4
18.2
0.072
TPC15A
DXP
14.3
15.0
15.8
1.0
12.8
1.0
10
70.8
21.2
0.076
TPC16A
DZP
15.2
16.0
16.8
1.0
13.6
1.0
10
66.7
22.5
0.078
TPC18A
EEP
17.1
18.0
18.9
1.0
15.3
1.0
10
59.5
25.2
0.080
TPC20A
EGP
19.0
20.0
21.0
1.0
17.1
1.0
10
54.2
27.7
0.082
TPC22A
EKP
20.9
22.0
23.1
1.0
18.8
1.0
10
49.0
30.6
0.084
TPC24A
EMP
22.8
24.0
25.2
1.0
20.5
1.0
10
45.2
33.2
0.085
TPC27A
EPP
25.7
27.0
28.4
1.0
23.1
1.0
10
40.0
37.5
0.087
TPC30A
ERP
28.5
30.0
31.5
1.0
25.6
1.0
10
36.2
41.4
0.088
TPC33A
ETP
31.4
33.0
34.7
1.0
28.2
1.0
10
32.8
45.7
0.089
TPC36A
EVP
34.2
36.0
37.8
1.0
30.8
1.0
15
30.1
49.9
0.090
TPC39A
EXP
37.1
39.0
41.0
1.0
33.3
1.0
15
27.8
53.9
0.091
TPC43A
EZP
40.9
43.0
45.2
1.0
36.8
1.0
20
25.3
59.3
0.092
TPC47A
FEP
44.7
47.0
49.4
1.0
40.2
1.0
20
23.1
64.8
0.092
TPC51A
FGP
48.5
51.0
53.6
1.0
43.6
1.0
20
21.4
70.1
0.093
Notes
(1) V
BR measured after IT applied for 300 μs, IT = square wave pulse or equivalent
(2) Surge current waveform per fig. 3 and derated per fig. 2
(3) To calculate V
BR vs. junction temperature, use the following formula: VBR at TJ = VBR at 25 °C x (1 + αT x (TJ - 25))
(4) All terms and symbols are consistent with ANSI/IEEE C62.35
ORDERING INFORMATION (Example)
PREFERRED P/N
TPC10AHM3_A/H
(1)
TPC10AHM3_A/I (1)
UNIT WEIGHT (g)
PREFERRED PACKAGE CODE
BASE QUANTITY
DELIVERY MODE
0.10
H
1500
7" diameter plastic tape and reel
0.10
I
6500
13" diameter plastic tape and reel
Note
(1) Automotive grade
Revision: 19-Apr-2022
Document Number: 89056
2
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TPC6.8A thru TPC51A
www.vishay.com
Vishay General Semiconductor
RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C, unless otherwise noted)
PPPM - Peak Power (kW)
TA = 25 °C
Non-Repetitive Pulse
Waveform shown in Fig. 3
10
1
Junction Capacitance (pF)
10 000
100
VR, measured at
Zero Bias
VR measured at
Stand-Off Voltage, VWM
1000
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
100
0.1
0.1 µs
1.0 µs
10 µs
100 µs
1.0 ms
1
10 ms
10
td - Pulse Width (s)
Fig. 1 - Peak Pulse Power Rating Curve
Fig. 4 - Typical Junction Capacitance
100
100
Transient Thermal Impedance (°C/W)
Peak Pulse Power (PPP) or Current (IPP)
Derating in Percentage (%)
100
VBR - Breakdown Voltage (V)
75
50
25
0
50
0
100
150
200
10
1
RthJA, by mounted
on recommended
PCB 2 oz. area
0.1
0.01
0.1
1
10
100
1000
TJ - Initial Temperature (°C)
Tp - Pulse Duration (s)
Fig. 2 - Pulse Power or Current vs. Initial Junction Temperature
Fig. 5 - Typical Transient Thermal Impedance
IPPM - Peak Pulse Current, % IRSM
150
TJ = 25 °C
Pulse Width (td)
is defined as the Point
where the Peak Current
decays to 50 % of IPPM
tr = 10 µs
Peak Value
IPPM
100
Half Value - IPP
IPPM
2
50
10/1000 µs Waveform
as defined by R.E.A.
td
0
0
1.0
2.0
3.0
4.0
t - Time (ms)
Fig. 3 - Pulse Waveform
Revision: 19-Apr-2022
Document Number: 89056
3
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TPC6.8A thru TPC51A
www.vishay.com
Vishay General Semiconductor
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
SMPC (TO-277A)
0.187 (4.75)
0.175 (4.45)
0.016 (0.40)
0.006 (0.15)
0.262 (6.65)
0.250 (6.35)
0.242 (6.15)
0.238 (6.05)
Cathode band line
2
1
0.047 (1.20)
0.039 (1.00)
0.171 (4.35)
0.167 (4.25)
0.146 (3.70)
0.134 (3.40)
Mounting Pad Layout
0.087 (2.20)
0.075 (1.90)
0.189 (4.80)
MIN.
0.189 (4.80)
0.173 (4.40)
0.186 (4.72)
MIN.
0.268
(6.80)
0.155 (3.94)
NOM.
0.030 (0.75) NOM.
0.049 (1.24)
0.037 (0.94)
0.050 (1.27)
MIN.
0.084 (2.13) NOM.
0.053 (1.35)
0.041 (1.05)
0.041
(1.04)
0.055 (1.40)
MIN.
Conform to JEDEC® TO-277A
Revision: 19-Apr-2022
Document Number: 89056
4
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2023 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jan-2023
1
Document Number: 91000