TPC8.2AHM3/86A

TPC6.8A thru TPC51A www.vishay.com Vishay General Semiconductor Surface Mount PAR® Transient Voltage Suppressors Unidirectional 1500 W TVS in SMPC (TO-277) Package eSMP Series FEATURES • Junction passivation optimized design passivated anisotropic rectifier technology A Available • TJ = 185 °C capability suitable for high reliability and automotive requirement 1 • Very low profile - typical height of 1.1 mm • Ideal for automated placement 2 • Unidirection only TO-277A (SMPC) • Excellent clamping capability A Cathode 1 Anode Cathode 2 • Low incremental surge resistance • Very fast response time • Meets MSL level 1, per J-STD-020 • AEC-Q101 qualified LINKS TO ADDITIONAL RESOURCES 3D 3D • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 TYPICAL APPLICATIONS 3D Models PRIMARY CHARACTERISTICS VWM 5.8 V to 43.6 V VBR 6.8 V to 51 V PPPM 1500 W TJ max. 185 °C Polarity Unidirectional Package SMPC (TO-277A) Use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting on ICs, MOSFET, signal lines of sensor units for consumer, computer, industrial, automotive, and telecommunication. MECHANICAL DATA Case: SMPC (TO-277A) Molding compound meets UL 94 V-0 flammability rating Base P/NHM3_X - halogen-free, RoHS-compliant, and AEC-Q101 qualified (“X” denotes revision code e.g. A, B, ...) Terminals: matte tin plated leads, solderable J-STD-002 and JESD 22-B102 HM3 suffix meets JESD 201 class 2 whisker test per MAXIMUM RATINGS (TA = 25 °C, unless otherwise noted) PARAMETER SYMBOL VALUE UNIT Peak power dissipation with a 10/1000 μs waveform (fig. 3) (1)(2) PPPM 1500 W Peak power pulse current with a 10/1000 μs waveform (fig. 1) (1) IPPM See next table A Peak forward surge current 8.3 ms single half sine-wave (2) IFSM 200 A Maximum instantaneous forward voltage at 100 A (3) Operating junction and storage temperature range VF 3.5 V TJ, TSTG -65 to +185 °C Notes (1) Non-repetitive current pulse, per fig. 3 and derated above T = 25 °C per fig. 2 A (2) Measured on 8.3 ms single half sine-wave, or equivalent square wave, duty cycle = 4 pulses per minute maximum (3) Pulse test: 300 μs pulse width, 1 % duty cycle Revision: 19-Apr-2022 Document Number: 89056 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TPC6.8A thru TPC51A www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C, unless otherwise noted) DEVICE TYPE DEVICE MARKING CODE MAXIMUM MAXIMUM MAXIMUM TYPICAL STAND-OF MAXIMUM TEST REVERSE PEAK CLAMPIN TEMP. F REVERSE CURREN LEAKAGE PULSE G COEFFICIE VOLTAGE LEAKAGE T AT VWM SURGE VOLTAGE NT OF VBR (3) VWM AT VWM IT AT IPPM αT TJ = 150 °C CURRENT MAX. (mA) (V) IR (μA) IPPM (2) (A) (%/°C) ID (μA) VC (V) BREAKDOWN VOLTAGE VBR (1) AT IT (V) MIN. NOM. 6.45 6.80 TPC6.8A DEP 7.14 10 5.80 1500 10 000 143 10.5 0.047 TPC7.5A DGP 7.13 7.50 7.88 10 6.40 500 5000 133 11.3 0.052 TPC8.2A DKP 7.79 8.20 8.61 10 7.02 200 2000 124 12.1 0.056 TPC9.1A DMP 8.65 9.10 9.55 1.0 7.78 50 500 112 13.4 0.060 TPC10A DPP 9.5 10.0 10.5 1.0 8.55 20 200 103 14.5 0.064 TPC11A DRP 10.5 11.0 11.6 1.0 9.40 5.0 50 96.2 15.6 0.067 TPC12A DTP 11.4 12.0 12.6 1.0 10.2 2.0 10 89.8 16.7 0.070 TPC13A DVP 12.4 13.0 13.7 1.0 11.1 2.0 10 82.4 18.2 0.072 TPC15A DXP 14.3 15.0 15.8 1.0 12.8 1.0 10 70.8 21.2 0.076 TPC16A DZP 15.2 16.0 16.8 1.0 13.6 1.0 10 66.7 22.5 0.078 TPC18A EEP 17.1 18.0 18.9 1.0 15.3 1.0 10 59.5 25.2 0.080 TPC20A EGP 19.0 20.0 21.0 1.0 17.1 1.0 10 54.2 27.7 0.082 TPC22A EKP 20.9 22.0 23.1 1.0 18.8 1.0 10 49.0 30.6 0.084 TPC24A EMP 22.8 24.0 25.2 1.0 20.5 1.0 10 45.2 33.2 0.085 TPC27A EPP 25.7 27.0 28.4 1.0 23.1 1.0 10 40.0 37.5 0.087 TPC30A ERP 28.5 30.0 31.5 1.0 25.6 1.0 10 36.2 41.4 0.088 TPC33A ETP 31.4 33.0 34.7 1.0 28.2 1.0 10 32.8 45.7 0.089 TPC36A EVP 34.2 36.0 37.8 1.0 30.8 1.0 15 30.1 49.9 0.090 TPC39A EXP 37.1 39.0 41.0 1.0 33.3 1.0 15 27.8 53.9 0.091 TPC43A EZP 40.9 43.0 45.2 1.0 36.8 1.0 20 25.3 59.3 0.092 TPC47A FEP 44.7 47.0 49.4 1.0 40.2 1.0 20 23.1 64.8 0.092 TPC51A FGP 48.5 51.0 53.6 1.0 43.6 1.0 20 21.4 70.1 0.093 Notes (1) V BR measured after IT applied for 300 μs, IT = square wave pulse or equivalent (2) Surge current waveform per fig. 3 and derated per fig. 2 (3) To calculate V BR vs. junction temperature, use the following formula: VBR at TJ = VBR at 25 °C x (1 + αT x (TJ - 25)) (4) All terms and symbols are consistent with ANSI/IEEE C62.35 ORDERING INFORMATION (Example) PREFERRED P/N TPC10AHM3_A/H (1) TPC10AHM3_A/I (1) UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE 0.10 H 1500 7" diameter plastic tape and reel 0.10 I 6500 13" diameter plastic tape and reel Note (1) Automotive grade Revision: 19-Apr-2022 Document Number: 89056 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TPC6.8A thru TPC51A www.vishay.com Vishay General Semiconductor RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C, unless otherwise noted) PPPM - Peak Power (kW) TA = 25 °C Non-Repetitive Pulse Waveform shown in Fig. 3 10 1 Junction Capacitance (pF) 10 000 100 VR, measured at Zero Bias VR measured at Stand-Off Voltage, VWM 1000 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p 100 0.1 0.1 µs 1.0 µs 10 µs 100 µs 1.0 ms 1 10 ms 10 td - Pulse Width (s) Fig. 1 - Peak Pulse Power Rating Curve Fig. 4 - Typical Junction Capacitance 100 100 Transient Thermal Impedance (°C/W) Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage (%) 100 VBR - Breakdown Voltage (V) 75 50 25 0 50 0 100 150 200 10 1 RthJA, by mounted on recommended PCB 2 oz. area 0.1 0.01 0.1 1 10 100 1000 TJ - Initial Temperature (°C) Tp - Pulse Duration (s) Fig. 2 - Pulse Power or Current vs. Initial Junction Temperature Fig. 5 - Typical Transient Thermal Impedance IPPM - Peak Pulse Current, % IRSM 150 TJ = 25 °C Pulse Width (td) is defined as the Point where the Peak Current decays to 50 % of IPPM tr = 10 µs Peak Value IPPM 100 Half Value - IPP IPPM 2 50 10/1000 µs Waveform as defined by R.E.A. td 0 0 1.0 2.0 3.0 4.0 t - Time (ms) Fig. 3 - Pulse Waveform Revision: 19-Apr-2022 Document Number: 89056 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TPC6.8A thru TPC51A www.vishay.com Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) SMPC (TO-277A) 0.187 (4.75) 0.175 (4.45) 0.016 (0.40) 0.006 (0.15) 0.262 (6.65) 0.250 (6.35) 0.242 (6.15) 0.238 (6.05) Cathode band line 2 1 0.047 (1.20) 0.039 (1.00) 0.171 (4.35) 0.167 (4.25) 0.146 (3.70) 0.134 (3.40) Mounting Pad Layout 0.087 (2.20) 0.075 (1.90) 0.189 (4.80) MIN. 0.189 (4.80) 0.173 (4.40) 0.186 (4.72) MIN. 0.268 (6.80) 0.155 (3.94) NOM. 0.030 (0.75) NOM. 0.049 (1.24) 0.037 (0.94) 0.050 (1.27) MIN. 0.084 (2.13) NOM. 0.053 (1.35) 0.041 (1.05) 0.041 (1.04) 0.055 (1.40) MIN. Conform to JEDEC® TO-277A Revision: 19-Apr-2022 Document Number: 89056 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2023 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2023 1 Document Number: 91000