TPSMP6.8A thru TPSMP43A
www.vishay.com
Vishay General Semiconductor
High Power Density Surface Mount PAR®
Transient Voltage Suppressors
FEATURES
eSMP ® Series
• Junction
passivation
optimized
design
passivated anisotropic rectifier technology
• TJ = 185 °C capability suitable for high reliability
and automotive requirement
• Very low profile - typical height of 1.0 mm
• Ideal for automated placement
• Unidirection only
SMP (DO-220AA)
Anode
• Excellent clamping capability
• Low incremental surge resistance
Cathode
• Very fast response time
LINKS TO ADDITIONAL RESOURCES
3D 3D
• Meets MSL level 1, per J-STD-020, LF maximum peak
of 260 °C
• AEC-Q101 qualified
3D Models
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
PRIMARY CHARACTERISTICS
TYPICAL APPLICATIONS
VBR
6.8 V to 43 V
VWM
5.8 V to 36.8 V
PPPM (for VBR 6.8 V)
250 W
PPPM (for VBR 7.5 V to 12 V)
300 W
PPPM (for VBR 13 V to 43 V)
400 W
PD
2.5 W
IFSM
40 A
TJ max.
185 °C
Polarity
Unidirectional
Package
SMP (DO-220AA)
Protection for ICs, drive transistors, signal lines of sensor
units, and electronic units in consumer, computer,
industrial, and automotive applications.
MECHANICAL DATA
Case: SMP (DO-220AA)
Molding compound meets UL 94 V-0 flammability rating
Base P/NHM3_X - halogen-free, RoHS-compliant and
AEC-Q101 qualified (“X” denotes revision code e.g. A, B, ...)
Terminals: matte tin plated leads, solderable
J-STD-002 and JESD 22-B102
HM3 suffix meets JESD 201 class 2 whisker test
per
Polarity: color band denotes cathode end
MAXIMUM RATINGS (TA = 25 °C, unless otherwise noted)
PARAMETER
SYMBOL
VALUE
UNIT
Peak power dissipation with a 10/1000 μs waveform (fig. 1 and 3) (1)(2)
PPPM
See table next page
W
Peak power pulse current with a 10/1000 μs waveform (fig. 1) (1)
IPPM
See table next page
A
PD
2.5
W
IFSM
40
A
Power dissipation on infinite heatsink, TA = 75 °C
Peak forward surge current 10 ms single half sine-wave
superimposed on rated load
Maximum instantaneous forward voltage at 25 A
(3)
Operating junction and storage temperature range
VF
2.5
V
TJ, TSTG
-65 to +185
°C
Notes
(1) Non-repetitive current pulse, per fig. 3 and derated above T = 25 °C per fig. 2
A
(2) Mounted on PCB with 5.0 mm x 5.0 mm copper pads attached to each terminal
(3) Pulse test: 300 μs pulse width, 1 % duty cycle
Revision: 25-Apr-2022
Document Number: 88471
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TPSMP6.8A thru TPSMP43A
www.vishay.com
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TA = 25 °C, unless otherwise noted)
DEVICE
TYPE
MAXIMUM MAXIMUM
MAXIMUM
MAXIMUM
MAXIMUM
REVERSE
PEAK
BREAKDOWN
DEVICE
CLAMPING TEMPERATURE
TEST
STAND-OFF REVERSE
LEAKAGE
PULSE
VOLTAGE
MARKING
VOLTAGE COEFFICIENT
CURRENT VOLTAGE LEAKAGE
AT VWM
SURGE
VBR (1) AT IT
AT VWM
OF VBR
AT IPPM
IT (mA)
VWM (V)
CODE
CURRENT
T
=
150
°C
J
(V)
IR (μA)
VC (V)
(%/°C)
(2)
IPPM (A)
ID (μA)
MIN. MAX.
TPSMP6.8A
AEP
6.45
7.14
10.0
5.80
300
1000
23.8
10.5
0.057
TPSMP7.5A
AGP
7.13
7.88
10.0
TPSMP8.2A
AKP
7.79
8.61
10.0
6.40
150
500
26.5
11.3
0.061
7.02
50.0
200
24.8
12.1
0.065
TPSMP9.1A
AMP
8.65
9.55
1.0
7.78
10.0
50.0
22.4
13.4
0.068
TPSMP10A
APP
9.50
10.5
1.0
8.55
5.0
20.0
20.7
14.5
0.073
TPSMP11A
ARP
10.5
11.6
1.0
9.40
2.0
10.0
19.2
15.6
0.075
TPSMP12A
ATP
11.4
12.6
1.0
10.2
1.0
5.0
18.0
16.7
0.078
TPSMP13A
AVP
12.4
13.7
1.0
11.1
1.0
5.0
22.0
18.2
0.081
TPSMP15A
AXP
14.3
15.8
1.0
12.8
1.0
5.0
18.9
21.2
0.084
TPSMP16A
AZP
15.2
16.8
1.0
13.6
1.0
5.0
17.8
22.5
0.086
TPSMP18A
BEP
17.1
18.9
1.0
15.3
1.0
5.0
15.9
25.5
0.088
TPSMP20A
BGP
19.0
21.0
1.0
17.1
1.0
5.0
14.4
27.7
0.090
TPSMP22A
BKP
20.9
23.1
1.0
18.8
1.0
5.0
13.1
30.6
0.092
TPSMP24A
BMP
22.8
25.2
1.0
20.5
1.0
5.0
12.0
33.2
0.094
TPSMP27A
BPP
25.7
28.4
1.0
23.1
1.0
5.0
10.7
37.5
0.096
TPSMP30A
BRP
28.5
31.5
1.0
25.6
1.0
5.0
9.7
41.4
0.097
TPSMP33A
BTP
31.4
34.7
1.0
28.2
1.0
5.0
8.8
45.7
0.098
TPSMP36A
BVP
34.2
37.8
1.0
30.8
1.0
5.0
8.0
49.9
0.099
TPSMP39A
BXP
37.1
41.0
1.0
33.3
1.0
5.0
7.4
53.9
0.100
TPSMP43A
BZP
40.9
45.2
1.0
36.8
1.0
5.0
6.7
59.3
0.101
Notes
(1) V
BR measured after IT applied for 300 μs, IT = square wave pulse or equivalent
(2) Surge current waveform per fig. 3 and derated per fig. 2
(3) All terms and symbols are consistent with ANSI/IEEE C62.35
ORDERING INFORMATION (Example)
PREFERRED P/N
TPSMP6.8AHM3_A/H
(1)
TPSMP6.8AHM3_A/I (1)
UNIT WEIGHT (g)
PREFERRED PACKAGE CODE
BASE QUANTITY
DELIVERY MODE
0.024
H
3000
7" diameter plastic tape and reel
0.024
I
10 000
13" diameter plastic tape and reel
Note
(1) Automotive grade
Revision: 25-Apr-2022
Document Number: 88471
2
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TPSMP6.8A thru TPSMP43A
www.vishay.com
Vishay General Semiconductor
RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C, unless otherwise noted)
10 000
PPPM - Peak Pulse Power (kW)
TPSMP13A thru TPSMP43A
TPSMP7.5A thru TPSMP12A
TPSMP6.8A
0.1
VR measured at
Stand-Off Voltage, VWM
100
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
10
1
100
10
1000
10 000
1
100
10
td - Pulse Width (µs)
VWM - Reverse Stand-Off Voltage (V)
Fig. 1 - Peak Pulse Power Rating Curve
Fig. 4 - Typical Junction Capacitance
40
Peak Forward Surge Current (A)
100
75
50
25
35
30
25
20
15
10
5
0
0
0
25
50
75
100
125
150
175
10
1
200
100
TJ - Initial Temperature (°C)
Number of Cycles at 50 Hz
Fig. 2 - Pulse Derating Curve
Fig. 5 - Maximum Peak Forward Surge Current
3.0
150
tr = 10 µs
Peak Value
IPPM
100
TJ = 25 °C
Pulse Width (td)
is defined as the Point
where the Peak Current
decays to 50 % of IPPM
TA = TL, on Infinite Heatsink
Half Value - IPP
IPPM
2
50
10/1000 µs Waveform
as defined by R.E.A.
PM(AV) - Steady State Power
Dissipation (W)
IPPM - Peak Pulse Current, % IRSM
VR, measured at
Zero Bias
1000
1
0.01
0.1
Peak Pulse Power (PPP) of Current (IPP)
Derating in Percentage (%)
CJ - Junction Capacitance (pF)
10
2.5
2.0
FR-4 PCB, on Vishay
minimum recommended
Pad Layout
1.5
1.0
0.5
td
0.0
0
0
1.0
2.0
3.0
4.0
0
25
50
75
100
125
150
175
200
t - Time (ms)
TJ - Initial Temperature (°C)
Fig. 3 - Pulse Waveform
Fig. 6 - Steady State Power Derating Curve
Revision: 25-Apr-2022
Document Number: 88471
3
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TPSMP6.8A thru TPSMP43A
www.vishay.com
Vishay General Semiconductor
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
SMP (DO-220AA)
0.012 (0.30) REF.
Cathode Band
0.053 (1.35)
0.041 (1.05)
0.086 (2.18)
0.074 (1.88)
0.142 (3.61)
0.126 (3.19)
0.036 (0.91)
0.024 (0.61)
0.103 (2.60)
0.087 (2.20)
0.032 (0.80)
0.016 (0.40)
0.158 (4.00)
0.146 (3.70)
Mounting pad layout
0.105
(2.67)
0.013 (0.35)
0.004 (0.10)
0.025 0.030
(0.635) (0.762)
0.045 (1.15)
0.033 (0.85)
0.012 (0.30) 0.018 (0.45)
0.000 (0.00) 0.006 (0.15)
0.100
(2.54)
0.050
(1.27)
Revision: 25-Apr-2022
Document Number: 88471
4
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2023 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jan-2023
1
Document Number: 91000