TPSMP39A-E3/84A

TPSMP6.8 thru TPSMP43A Vishay General Semiconductor New Product High Power Density Surface Mount Automotive Transient Voltage Suppressors DO-220AA (SMP) MAJOR RATINGS AND CHARACTERISTICS V(BR) 6.8 V to 43 V PPPM (for V(BR) 6.8 V) 250 W PPPM (for V(BR) 7.5 V - 12 V) 300 W PPPM (for V(BR) 13 V - 43 V) 400 W PD 1.0 W IFSM 40 A TJ max. 185 °C FEATURES • Very low profile - typical height of 1.0 mm • Ideal for automated placement • Unidirection only • Exclusive patented PAR oxide passivated chip construction • Excellent clamping capability • Low incremental surge resistance • Very fast response time • Meets MSL level 1, per J-STD-020C • Solder Dip 260 °C, 40 seconds • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC TYPICAL APPLICATIONS Protection for Ics, drive transistors, signal lines of sensor units, and electronic units in consumer, computer, industrial and automotive applications. MECHANICAL DATA Case: DO-220AA (SMP) Epoxy meets UL-94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002B and JESD22-B102D E3 suffix for commercial grade, HE3 suffix for high reliability grade (AEC Q101 qualified) Polarity: Color band denotes cathode end MAXIMUM RATINGS (TA = 25 °C, unless otherwise specified) PARAMETER SYMBOL VALUE UNIT PPPM see table next page W IPPM see table next page A PD 1.0 W IFSM 40 A Maximum instantaneous forward voltage at 25 A (3) VF 2.5 V Operating junction and storage temperature range TJ, TSTG - 65 to + 185 °C Peak power dissipation with a 10/1000 µs waveform (1)(2) (Fig. 1 & 3) Peak power pulse current with a 10/1000 µs waveform (1) (Fig. 1) Power dissipation on infinite heatsink, TA = 50 °C Peak forward surge current 10 ms single half sine-wave superimposed on rated load Note: (1) Non-repetitive current pulse, per fig. 3 and derated above TA = 25 °C per Fig. 2 (2) Mounted on P.C.B. with 5.0 x 5.0 mm copper pads attached to each terminal (3) Pulse test: 300 µs pulse width, 1 % duty cycle Document Number 88937 15-Feb-06 www.vishay.com 1 TPSMP6.8 thru TPSMP43A Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C, unless otherwise specified) DEVICE TYPE DEVICE MARKING CODE BREAKDOW N VOLTAGE V(BR) (1) AT IT (V) TPSMP6.8 ADP MIN 6.12 MAX 7.48 TPSMP6.8A AEP 6.45 7.14 MAXIMUM MAXIMUM REVERSE STANDREVERSE TEST LEAKAGE OFF LEAKAGE CURRENT AT VWM VOLTAGE AT VWM IT (mA) VWM (V) TJ = 150 °C IR (µA) ID (µA) MAXIMUM PEAK PULSE SURGE CURRENT IPPM (2) 10.0 5.50 300 1000 (AMPS) 23.2 10.0 5.80 300 1000 23.8 MAXIMUM CLAMPING VOLTAGE AT IPPM VC (VOLTS) MAXIMUM TEMPERATURE COEFFICIENT OF V(BR) (%/°C) 10.8 0.057 10.5 0.057 TPSMP7.5 AFP 6.75 8.25 10.0 6.05 150 500 25.6 11.7 0.060 TPSMP7.5A AGP 7.13 7.88 10.0 6.40 150 500 26.5 11.3 0.061 TPSMP8.2 AHP 7.38 9.02 10.0 6.63 50.0 200 24.0 12.5 0.065 TPSMP8.2A AKP 7.79 8.61 10.0 7.02 50.0 200 24.8 12.1 0.065 0.068 TPSMP9.1 ALP 8.19 10.0 1.0 7.37 10.0 50.0 21.7 13.8 TPSMP9.1A AMP 8.65 9.55 1.0 7.78 10.0 50.0 22.4 13.4 0.068 TPSMP10 ANP 9.00 11.0 1.0 8.10 5.0 20.0 20.0 15.0 0.073 TPSMP10A APP 9.50 10.5 1.0 8.55 5.0 20.0 20.7 14.5 0.073 TPSMP11 AQP 9.90 12.1 1.0 8.92 2.0 10.0 18.5 16.2 0.075 TPSMP11A ARP 10.5 11.6 1.0 9.40 2.0 10.0 19.2 15.6 0.075 TPSMP12 ASP 10.8 13.2 1.0 9.72 1.0 5.0 17.3 17.3 0.076 TPSMP12A ATP 11.4 12.6 1.0 10.2 1.0 5.0 18.0 16.7 0.078 TPSMP13 AUP 11.7 14.3 1.0 10.5 1.0 5.0 21.1 19.0 0.081 TPSMP13A AVP 12.4 13.7 1.0 11.1 1.0 5.0 22.0 18.2 0.081 TPSMP15 AWP 13.5 16.3 1.0 12.1 1.0 5.0 18.2 22.0 0.084 TPSMP15A AXP 14.3 15.8 1.0 12.8 1.0 5.0 18.9 21.2 0.084 TPSMP16 AYP 14.4 17.6 1.0 12.9 1.0 5.0 17.0 23.5 0.086 TPSMP16A AZP 15.2 16.8 1.0 13.6 1.0 5.0 17.8 22.5 0.086 TPSMP18 BDP 16.2 19.8 1.0 14.5 1.0 5.0 15.1 26.5 0.088 TPSMP18A BEP 17.1 18.9 1.0 15.3 1.0 5.0 15.9 25.5 0.088 TPSMP20 BFP 18.0 22.0 1.0 16.2 1.0 5.0 13.7 29.1 0.090 TPSMP20A BGP 19.0 21.0 1.0 17.1 1.0 5.0 14.4 27.7 0.090 TPSMP22 BHP 19.8 24.2 1.0 17.8 1.0 5.0 12.5 31.9 0.092 TPSMP22A BKP 20.9 23.1 1.0 18.8 1.0 5.0 13.1 30.6 0.092 TPSMP24 BLP 21.6 26.4 1.0 19.4 1.0 5.0 11.5 34.7 0.094 TPSMP24A BMP 22.8 25.2 1.0 20.5 1.0 5.0 12.0 33.2 0.094 TPSMP27 BNP 24.3 29.7 1.0 21.8 1.0 5.0 10.2 39.1 0.100 TPSMP27A BPP 25.7 28.4 1.0 23.1 1.0 5.0 10.7 37.5 0.096 TPSMP30 BQP 27.0 33.0 1.0 24.3 1.0 5.0 9.2 43.5 0.097 TPSMP30A BRP 28.5 31.5 1.0 25.6 1.0 5.0 9.7 41.4 0.097 TPSMP33 BSP 29.7 36.3 1.0 26.8 1.0 5.0 8.4 47.7 0.098 TPSMP33A BTP 31.4 34.7 1.0 28.2 1.0 5.0 8.8 45.7 0.098 TPSMP36 BUP 32.4 39.6 1.0 29.1 1.0 5.0 7.7 52.0 0.099 TPSMP36A BVP 34.2 37.8 1.0 30.8 1.0 5.0 8.0 49.9 0.099 TPSMP39 BWP 35.1 42.9 1.0 31.6 1.0 5.0 7.1 56.4 0.100 TPSMP39A BXP 37.1 41.0 1.0 33.3 1.0 5.0 7.4 53.9 0.100 TPSMP43 BYP 38.7 47.3 1.0 34.8 1.0 5.0 6.5 61.9 0.101 TPSMP43A BZP 40.9 45.2 1.0 36.8 1.0 5.0 6.7 59.3 0.101 Note: (1) V(BR) measured after IT applied for 300 µs, IT = square wave pulse or equivalent (2) Surge current waveform per fig. 3 and derated per fig. 2 (3) All terms and symbols are consistent with ANSI/IEEE C62.35 www.vishay.com 2 Document Number 88937 15-Feb-06 TPSMP6.8 thru TPSMP43A Vishay General Semiconductor ORDERING INFORMATION UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE TPSMP6.8A-E3/84A PREFERRED P/N 0.024 84A 3000 7" Diameter Plastic Tape & Reel TPSMP6.8A-E3/85A 0.024 85A 10000 13" Diameter Plastic Tape & Reel RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise specified) 10 150 IPPM - Peak Pulse Current, % IRSM PPPM - Peak Power (kW) TPSMP13 - TPSMP43A TPSMP7.5 - TPSMP12A 1.0 TPSMP6.8 0.1 0.01 0.1 µs Peak Value IPPM 100 Half Value - IPP 2 IPPM 50 10/1000 µsec Waveform as defined by R.E.A. td 0 1.0 µs 10 µs 100 µs 1.0 ms 10 ms 0 1.0 3.0 2.0 4.0 t - Time (ms) td - Pulse Width (s) Figure 1. Peak Pulse Power Rating Curve Figure 3. Pulse Waveform 100 10000 CJ, Junction Capacitance, pF Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage (%) TJ = 25 °C Pulse Width (td) is defined as the point where the peak current decays to 50 % of IPPM tr = 10 µsec 75 50 25 0 TJ = 25 °C f = 1 MHz Vsig = 50 mVp-p Measured at Zero Bias 1000 100 Measured at Stand-Off Voltage, VWM 10 0 25 50 75 100 125 150 TJ = Initial Temperature (°C) Figure 2. Pulse Derating Curve Document Number 88937 15-Feb-06 175 200 1 10 100 200 V(BR), Breakdown Voltage (V) Figure 4. Typical Junction Capacitance www.vishay.com 3 TPSMP6.8 thru TPSMP43A Vishay General Semiconductor 1.00 35 Power Dissipation (W) Peak Forward Surge Current (A) 40 30 25 20 15 10 0.75 0.50 0.25 5 0 0 1 10 0 100 25 50 75 100 125 150 175 200 Ambient Temperature, °C Number of Cycles at 50 Hz Figure 5. Maximum Peak Forward Surge Current Figure 6. Maximum Peak Forward Surge Current PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-220AA (SMP) 0.012 (0.30) REF Cathode band 0.074 (1.88) 0.105 (2.67) 0.013 (0.35) 0.004 (0.10) 0.032 (0.80) 0.016 (0.40) 0.103 (2.60) 0.087 (2.20) 0.142 (3.61) 0.126 (3.19) 0.158 (4.00) 0.146 (3.70) 0.025 (0.635) 0.030 (0.762) 0.045 (1.15) 0.033 (0.85) 0.012 (0.30) 0.000 (0.00) www.vishay.com 4 0.036 (0.91) 0.024 (0.61) 0.053 (1.35) 0.041 (1.05) 0.086 (2.18) 0.100 (2.54) 0.050 (1.27) 0.018 (0.45) 0.006 (0.15) Document Number 88937 15-Feb-06 Legal Disclaimer Notice Vishay Notice Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. Document Number: 91000 Revision: 08-Apr-05 www.vishay.com 1