TPSMP8.2AHE3/85A

New Product TPSMP6.8 thru TPSMP43A Vishay General Semiconductor High Power Density Surface Mount Automotive Transient Voltage Suppressors FEATURES • Very low profile - typical height of 1.0 mm • Ideal for automated placement • Uni-direction only • Exclusive patented PAR oxide passivated chip construction • Excellent clamping capability • Low incremental surge resistance • Very fast response time • Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC eSMP TM Series d* e t n e Pat *Patent #'s 4,980,315 5,166,769 5,278,094 DO-220AA (SMP) TYPICAL APPLICATIONS Protection for Ics, drive transistors, signal lines of sensor units, and electronic units in consumer, computer, industrial and automotive applications. PRIMARY CHARACTERISTICS VBR 6.8 V to 43 V PPPM (for VBR 6.8 V) 250 W PPPM (for VBR 7.5 V to 12 V) 300 W PPPM (for VBR 13 V to 43 V) 400 W PD 2.5 W IFSM 40 A TJ max. 185 °C MECHANICAL DATA Case: DO-220AA (SMP) Molding compound meets UL 94 V-0 flammability rating Base P/NHE3 - RoHS compliant, high reliability/ automotive grade (AEC Q101 qualified) Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 HE3 suffix meets JESD 201 class 2 whisker test Polarity: Color band denotes cathode end MAXIMUM RATINGS (TA = 25 °C, unless otherwise noted) PARAMETER SYMBOL VALUE UNIT PPPM See table next page W IPPM See table next page A PD 2.5 W IFSM 40 A Peak power dissipation with a 10/1000 µs waveform (1)(2) (Fig. 1 and 3) Peak power pulse current with a 10/1000 µs waveform (1) (Fig. 1) Power dissipation on infinite heatsink, TA = 75 °C Peak forward surge current 10 ms single half sine-wave superimposed on rated load Maximum instantaneous forward voltage at 25 A (3) VF 2.5 V Operating junction and storage temperature range TJ, TSTG - 65 to + 185 °C Notes: (1) Non-repetitive current pulse, per Fig. 3 and derated above TA = 25 °C per Fig. 2 (2) Mounted on P.C.B. with 5.0 x 5.0 mm copper pads attached to each terminal (3) Pulse test: 300 µs pulse width, 1 % duty cycle Document Number: 88471 Revision: 21-Oct-08 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 1 New Product TPSMP6.8 thru TPSMP43A Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C, unless otherwise noted) DEVICE TYPE DEVICE MARKING CODE BREAKDOW N VOLTAGE VBR (1) AT IT (V) MAX. 7.48 MAXIMUM MAXIMUM REVERSE STANDREVERSE TEST LEAKAGE OFF LEAKAGE CURRENT AT VWM VOLTAGE AT VWM IT (mA) VWM (V) TJ = 150 °C IR (µA) ID (µA) MAXIMUM PEAK PULSE SURGE CURRENT IPPM (2) (A) MAXIMUM MAXIMUM CLAMPING TEMPERATURE VOLTAGE COEFFICIENT AT IPPM OF VBR VC (V) (%/°C) TPSMP6.8 ADP MIN. 6.12 10.0 5.50 300 1000 23.2 10.8 TPSMP6.8A AEP 6.45 7.14 10.0 5.80 300 1000 23.8 10.5 0.057 TPSMP7.5 AFP 6.75 8.25 10.0 6.05 150 500 25.6 11.7 0.060 TPSMP7.5A AGP 7.13 7.88 10.0 6.40 150 500 26.5 11.3 0.061 TPSMP8.2 AHP 7.38 9.02 10.0 6.63 50.0 200 24.0 12.5 0.065 TPSMP8.2A AKP 7.79 8.61 10.0 7.02 50.0 200 24.8 12.1 0.065 TPSMP9.1 ALP 8.19 10.0 1.0 7.37 10.0 50.0 21.7 13.8 0.068 TPSMP9.1A AMP 8.65 9.55 1.0 7.78 10.0 50.0 22.4 13.4 0.068 TPSMP10 ANP 9.00 11.0 1.0 8.10 5.0 20.0 20.0 15.0 0.073 TPSMP10A APP 9.50 10.5 1.0 8.55 5.0 20.0 20.7 14.5 0.073 TPSMP11 AQP 9.90 12.1 1.0 8.92 2.0 10.0 18.5 16.2 0.075 TPSMP11A ARP 10.5 11.6 1.0 9.40 2.0 10.0 19.2 15.6 0.075 TPSMP12 ASP 10.8 13.2 1.0 9.72 1.0 5.0 17.3 17.3 0.076 TPSMP12A ATP 11.4 12.6 1.0 10.2 1.0 5.0 18.0 16.7 0.078 TPSMP13 AUP 11.7 14.3 1.0 10.5 1.0 5.0 21.1 19.0 0.081 TPSMP13A AVP 12.4 13.7 1.0 11.1 1.0 5.0 22.0 18.2 0.081 TPSMP15 AWP 13.5 16.3 1.0 12.1 1.0 5.0 18.2 22.0 0.084 TPSMP15A AXP 14.3 15.8 1.0 12.8 1.0 5.0 18.9 21.2 0.084 TPSMP16 AYP 14.4 17.6 1.0 12.9 1.0 5.0 17.0 23.5 0.086 TPSMP16A AZP 15.2 16.8 1.0 13.6 1.0 5.0 17.8 22.5 0.086 TPSMP18 BDP 16.2 19.8 1.0 14.5 1.0 5.0 15.1 26.5 0.088 TPSMP18A BEP 17.1 18.9 1.0 15.3 1.0 5.0 15.9 25.5 0.088 TPSMP20 BFP 18.0 22.0 1.0 16.2 1.0 5.0 13.7 29.1 0.090 TPSMP20A BGP 19.0 21.0 1.0 17.1 1.0 5.0 14.4 27.7 0.090 TPSMP22 BHP 19.8 24.2 1.0 17.8 1.0 5.0 12.5 31.9 0.092 TPSMP22A BKP 20.9 23.1 1.0 18.8 1.0 5.0 13.1 30.6 0.092 TPSMP24 BLP 21.6 26.4 1.0 19.4 1.0 5.0 11.5 34.7 0.094 TPSMP24A BMP 22.8 25.2 1.0 20.5 1.0 5.0 12.0 33.2 0.094 TPSMP27 BNP 24.3 29.7 1.0 21.8 1.0 5.0 10.2 39.1 0.100 TPSMP27A BPP 25.7 28.4 1.0 23.1 1.0 5.0 10.7 37.5 0.096 TPSMP30 BQP 27.0 33.0 1.0 24.3 1.0 5.0 9.2 43.5 0.097 TPSMP30A BRP 28.5 31.5 1.0 25.6 1.0 5.0 9.7 41.4 0.097 TPSMP33 BSP 29.7 36.3 1.0 26.8 1.0 5.0 8.4 47.7 0.098 TPSMP33A BTP 31.4 34.7 1.0 28.2 1.0 5.0 8.8 45.7 0.098 TPSMP36 BUP 32.4 39.6 1.0 29.1 1.0 5.0 7.7 52.0 0.099 0.057 TPSMP36A BVP 34.2 37.8 1.0 30.8 1.0 5.0 8.0 49.9 0.099 TPSMP39 BWP 35.1 42.9 1.0 31.6 1.0 5.0 7.1 56.4 0.100 TPSMP39A BXP 37.1 41.0 1.0 33.3 1.0 5.0 7.4 53.9 0.100 TPSMP43 BYP 38.7 47.3 1.0 34.8 1.0 5.0 6.5 61.9 0.101 TPSMP43A BZP 40.9 45.2 1.0 36.8 1.0 5.0 6.7 59.3 0.101 Notes: (1) VBR measured after IT applied for 300 µs, IT = square wave pulse or equivalent (2) Surge current waveform per Fig. 3 and derated per Fig. 2 (3) All terms and symbols are consistent with ANSI/IEEE C62.35 www.vishay.com 2 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com Document Number: 88471 Revision: 21-Oct-08 New Product TPSMP6.8 thru TPSMP43A Vishay General Semiconductor ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE TPSMP6.8AHE3/84A (1) BASE QUANTITY DELIVERY MODE 0.024 84A 3000 7" diameter plastic tape and reel TPSMP6.8AHE3/85A (1) 0.024 85A 10000 13" diameter plastic tape and reel Note: (1) Automotive grade AEC Q101 qualified RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 150 10 TPSMP7.5 - TPSMP12A 1.0 TPSMP6.8 0.1 0.01 0.1 µs TJ = 25 °C Pulse Width (td) is defined as the Point where the Peak Current decays to 50 % of IPPM tr = 10 µs Peak Value IPPM 100 Half Value - IPP IPPM 2 50 10/1000 µs Waveform as defined by R.E.A. td 0 1.0 µs 10 µs 100 µs 1.0 ms 10 ms 0 1.0 3.0 2.0 td - Pulse Width (s) t - Time (ms) Figure 1. Peak Pulse Power Rating Curve Figure 3. Pulse Waveform 100 4.0 10 000 CJ - Junction Capacitance (pF) Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage (%) IPPM - Peak Pulse Current, % IRSM PPPM - Peak Power (kW) TPSMP13 - TPSMP43A 75 50 25 VR, measured at Zero Bias 1000 VR measured at Stand-Off Voltage, VWM 100 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p 10 0 0 25 50 75 100 125 150 175 200 1 10 100 TJ - Initial Temperature (°C) VBR - Breakdown Voltage (V) Figure 2. Pulse Derating Curve Figure 4. Typical Junction Capacitance Document Number: 88471 Revision: 21-Oct-08 For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com www.vishay.com 3 New Product TPSMP6.8 thru TPSMP43A Vishay General Semiconductor 40 3.0 PM(AV) - Steady State Power Dissipation (W) Peak Forward Surge Current (A) TA = TL, on Infinite Heatsink 35 30 25 20 15 10 5 2.5 2.0 1.5 FR-4 PCB, on Vishay minimum recommended Pad Layout 1.0 0.5 0.0 0 1 0 100 10 25 50 75 100 125 150 175 200 Number of Cycles at 50 Hz TA - Ambient Temperature (°C) Figure 5. Maximum Peak Forward Surge Current Figure 6. Steady State Power Derating Curve PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-220AA (SMP) 0.012 (0.30) REF. Cathode Band 0.105 (2.67) 0.013 (0.35) 0.004 (0.10) 0.032 (0.80) 0.016 (0.40) 0.103 (2.60) 0.087 (2.20) 0.142 (3.61) 0.126 (3.19) 0.158 (4.00) 0.146 (3.70) 0.025 (0.635) 0.030 (0.762) 0.045 (1.15) 0.033 (0.85) 0.012 (0.30) 0.000 (0.00) www.vishay.com 4 0.036 (0.91) 0.024 (0.61) 0.053 (1.35) 0.041 (1.05) 0.086 (2.18) 0.074 (1.88) 0.100 (2.54) 0.050 (1.27) 0.018 (0.45) 0.006 (0.15) For technical questions within your region, please contact one of the following: PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com Document Number: 88471 Revision: 21-Oct-08 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1