TR3A226M010C1500

Upgrade for High Reliability With T83 TR3 www.vishay.com Vishay Sprague Solid Tantalum Surface Mount Chip Capacitors TANTAMOUNT™, Molded Case, Low ESR FEATURES LINKS TO ADDITIONAL RESOURCES 3D 3D 3D Models Calculators Related Documents Did You Know? Technical Notes • Low ESR • Surge current tested: cases A and B - selected Available ratings; cases C, D, E, and W - all ratings • Qualified to EIA-717 Available • Molded case available in seven case codes • High ripple current carrying capability • Terminations: 100 % matte tin standard, tin / lead available Available • Compatible with “high volume” automatic pick and place equipment • Compliant terminations • Meets EIA-535-BAAC mechanical and performance requirements • Moisture sensitivity level 1 • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 Note * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details PERFORMANCE / ELECTRICAL CHARACTERISTICS www.vishay.com/doc?40192 Operating Temperature: -55 °C to +125 °C (above 85 °C, voltage derating is required) Capacitance Range: 0.47 μF to 1000 μF Capacitance Tolerance: ± 10 %, ± 20 % Voltage Rating: 4 VDC to 75 VDC APPLICATIONS Note • For recommended voltage derating guidelines see “Typical Performance Characteristics” • • • • • Industrial Telecom infrastructure Consumer Computer General purpose ORDERING INFORMATION TR3 TYPE D CASE CODE 107 CAPACITANCE K CAPACITANCE TOLERANCE 010 DC VOLTAGE RATING AT +85 °C C TERMINATION AND PACKAGING 0100 ESR See Ratings and Case Codes table This is expressed in picofarads. The first two digits are the significant figures. The third is the number of zeros to follow. K = ± 10 % M = ± 20 % This is expressed in V. To complete the three-digit block, zeros precede the voltage rating. A decimal point is indicated by an “R” (6R3 = 6.3 V). Matte tin C = 7" (178 mm) reel D = 13" (330 mm) reel V = 7" (178 mm) reel, dry pack U = 13" (330 mm) reel, dry pack Maximum 100 kHz ESR in mΩ. See note below. Tin / lead E = 7" (178 mm) reel F = 13" (330 mm) reel T = 7" (178 mm) reel, dry pack W = 13" (330 mm) reel, dry pack Notes • We reserve the right to supply higher voltage ratings and tighter capacitance tolerance capacitors in the same case size. Voltage substitutions will be marked with the higher voltage rating. Low ESR solid tantalum chip capacitors allow delta ESR of 1.25 times the datasheet limit after mounting • Dry pack as specified in J-STD-033 Revision: 28-Feb-2023 Document Number: 40080 1 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Upgrade for High Reliability With T83 TR3 www.vishay.com Vishay Sprague DIMENSIONS in inches [millimeters] L TW W TH (MIN.) H Glue Pad P Glue Pad CASE CODE EIA SIZE L W H P TW TH (MIN.) A 3216-18 0.126 ± 0.008 [3.2 ± 0.20] 0.063 ± 0.008 [1.6 ± 0.20] 0.063 ± 0.008 [1.6 ± 0.20] 0.031 ± 0.012 [0.80 ± 0.30] 0.047 ± 0.004 [1.2 ± 0.10] 0.028 [0.70] B 3528-21 0.138 ± 0.008 [3.5 ± 0.20] 0.110 ± 0.008 [2.8 ± 0.20] 0.075 ± 0.008 [1.9 ± 0.20] 0.031 ± 0.012 [0.80 ± 0.30] 0.087 ± 0.004 [2.2 ± 0.10] 0.028 [0.70] C 6032-28 0.236 ± 0.012 [6.0 ± 0.30] 0.126 ± 0.012 [3.2 ± 0.30] 0.098 ± 0.012 [2.5 ± 0.30] 0.051 ± 0.012 [1.3 ± 0.30] 0.087 ± 0.004 [2.2 ± 0.10] 0.039 [1.0] D 7343-31 0.287 ± 0.012 [7.3 ± 0.30] 0.170 ± 0.012 [4.3 ± 0.30] 0.110 ± 0.012 [2.8 ± 0.30] 0.051 ± 0.012 [1.3 ± 0.30] 0.094 ± 0.004 [2.4 ± 0.10] 0.039 [1.0] E 7343-43 0.287 ± 0.012 [7.3 ± 0.30] 0.169 ± 0.012 [4.3 ± 0.30] 0.157 ± 0.012 [4.0 ± 0.30] 0.051 ± 0.012 [1.3 ± 0.30] 0.094 ± 0.004 [2.4 ± 0.10] 0.039 [1.0] W 7361-38 0.287 ± 0.012 [7.3 ± 0.30] 0.236 ± 0.012 [6.0 ± 0.30] 0.138 ± 0.012 [3.5 ± 0.30] 0.047 ± 0.008 [1.2 ± 0.20] 0.122 ± 0.004 [3.1 ± 0.10] 0.069 [1.75] Note • Glue pad (non-conductive, part of molded case) is dedicated for glue attachment (as user option) RATINGS AND CASE CODES μF 4V 6.3 V 10 V 16 V 20 V 25 V 35 V 0.15 50 V 63 V 75 V A (10.0) 0.22 A (6.00) A (10.0) 0.33 A (6.00) A (7.00) B (6.00), C (2.30) 0.47 A (7.00) A (4.00), B (4.00) 0.68 A (6.00) A (6.00, 4.00) A (4.00) A (6.00, 4.00, B (4.00, 2.00), 3.00), C (1.60) B (2.00) 1.0 A (6.20) A (5.50, 3.00) D (3.00, 1.50) 1.5 A (3.00) A (4.00, 3.00), B (3.00, 2.00), B (1.80) C (2.50, 0.90) B (2.00), C (1.50) B (2.00), C (2.00), D (2.00, 1.00) 2.2 B (2.50, 2.00, A (4.00), A (6.80, 6.00, A (4.00, 3.50, A (4.00, 3.00) B (1.70, 1.50, 1.50), 1.80) 1.80) 1.20, 0.90) C (1.50, 0.90) B (2.00), C (1.50), D (0.80) D (1.50) A (3.50, 3.00), B (1.50, 1.00), B (2.00, 1.50, C (0.80, 0.70, 0.75) 0.60) C (1.50), D (0.80) D (1.00, 0.80) D (1.20, 1.00, 0.80) C (1.00, 0.70, 0.50), D (0.70, 0.60, 0.50, 0.30), E (0.60, 0.30) D (0.70, 0.50) E (1.50) 3.3 A (4.00, 3.50), B (2.50) A (2.10) A (4.00), B (1.30) A (3.50, 3.00), B (1.50, 1.00, B (1.50, 1.00, 0.70), A (3.00, 1.50, A (3.00, 2.50, A (3.50, 1.80), 1.40, 1.00), 2.00, 1.50), B (1.00, 0.75) 0.90, 0.70), C (0.70, 0.60, C (0.60, 0.50), B (1.40) B (1.50, 0.80) 0.525) D (0.70) 4.7 6.8 A (1.80) A (3.00, 1.80),A (3.00, 1.50), B (1.30) B (1.20, 0.60) A (3.20, 3.00, B (2.00, 1.50, C (0.90, 0.475), D (0.70, 0.60, 1.20, 0.70, D (0.50, 0.40, 0.50, 0.30), 2.60), 0.50, 0.40), 0.30), E (0.55, 0.50) B (1.00, 0.60) C (0.60, 0.50) E (0.30) Note • ESR limits in Ω are shown in parenthesis Revision: 28-Feb-2023 Document Number: 40080 2 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Upgrade for High Reliability With T83 TR3 www.vishay.com Vishay Sprague RATINGS AND CASE CODES μF 10 15 22 33 47 68 100 150 220 4V 6.3 V 10 V 16 V 20 V 25 V B (1.30, 1.10, A (2.00, 1.80, A (1.70), B (1.00, 0.50), 0.90, 0.45), A (2.00, 1.50), 1.00, 0.90), B (0.80, 0.50), C (0.70, 0.50, C (0.60, 0.50, B (1.50) B (1.00, 0.80, C (0.60, 0.50, 0.475, 0.45, 0.45, 0.30), 0.40) 0.45) 0.75) D (0.40, 0.30) 35 V 50 V C (1.20, 0.45), D (0.70, 0.55, D (0.40, 0.30, 0.45), 0.26, 0.25, E (0.70, 0.55, 0.20, 0.135, 0.50, 0.40, 0.125), 0.30) E (0.25, 0.20) 63 V 75 V E (0.60) B (1.00, 0.80, C (0.60, 0.40), 0.60), D (0.35, 0.30, C (0.90, A (2.00, 1.00), 0.26, 0.225, E (0.40, 0.30, B (0.80, 0.50),B (1.00, 0.50), 0.425), A (1.50) A (2.00, 1.00) B (0.60, 0.45, 0.20, 0.150), 0.25, 0.20) C (0.40) C (0.40) D (0.35, 0.70), C (0.70) E (0.30, 0.225, 0.275, 0.25, 0.20, 0.150) 0.20) B (0.80, 0.70, C (1.00, 0.90, A (1.50, 1.00, D (0.40, 0.30, B (1.00, 0.70, 0.60, 0.40), 0.425, 0.40, A (3.00, 2.00, 0.90, 0.80), 0.275, 0.250, 0.60, 0.40), 0.30, 0.275, C (0.40, 1.00, 0.90), B (1.00, 0.70, 0.20), C (0.375, A (1.50) 0.250), 0.375), 0.50, 0.40), B (0.60), E (0.30, 0.275, 0.350), D (0.30, D (0.30, 0.20), C (0.40, C (0.50) 0.260, 0.20) D (0.25) 0.225, 0.20) E (0.30, 0.20) 0.345, 0.30) B (0.140, B (0.70, 0.50, A (2.00, 0.80, 0.65, 0.60, C (0.35, 0.30, D (0.40, 0.30, 0.35), 0.50, 0.425, A (1.50), 0.60), 0.225, 0.20), D (0.40, 0.25), 0.20), C (0.30, 0.30), B (0.50) B (0.45, 0.35, D (0.40, 0.25, E (0.30, 0.20, E (0.40, 0.25) 0.225), C (0.375, 0.60, 0.50) 0.175) 0.20) D (0.25, 0.30) 0.225, 0.15) B (0.65, 0.60, D (0.35, 0.25, 0.50, 0.35), C (0.50, 0.35, D (0.20, 0.20, 0.15, A (0.80), 0.175, 0.15, 0.30), C (0.35, 0.30, 0.125, 0.10), E A (0.80, 0.50), B (0.55, 0.50, 0.10), D (0.20, 0.15, 0.20), E (0.30, 0.20, (0.40, 0.20) (1) B (0.50) 0.35, 0.25), E (0.15, D (0.22, 0.20, 0.12, 0.10, 0.15, 0.125, C (0.30, 0.25) 0.125) 0.14, 0.135, 0.080, 0.070) 0.10) 0.10) B (1.50, 0.90, B (0.65, 0.55, 0.75, 0.60), D (0.20, 0.50, 0.35, C (0.30, 0.175, 0.15, 0.25), E (0.25, 0.275, 0.225 D (0.15, 0.10, B (0.50), 0.115), C (0.275, 0.070) 0.125) 0.20), C (0.275) E (0.20, 0.15, 0.25, 0.20), D (0.20, 0.15, 0.125, 0.12) D (0.20, 0.10, 0.07), 0.175) E (0.15) B (1.40), D (0.20, 0.15, B (1.50, 0.50, C (0.20, 0.15, 0.10, 0.085, D (0.15, 0.10), 0.40, 0.25), 0.08), 0.125, 0.10, A (1.00), W (0.20, 0.15, C (0.30, 0.25, D (0.15, 0.10, E (0.20, 0.15, 0.075), B (0.45), 0.10) 0.15, 0.125, 0.08, 0.07, 0.10), E (0.15, C (0.225) 0.065, 0.05), 0.10), 0.125, 0.10) W (0.20, 0.10, D (0.15, 0.14) E (0.125, 0.08, 0.06) 0.15, 0.10) D (0.40, 0.15, 0.125, 0.10, C (0.30, 0.20), C (0.50), 0.085, 0.075, B (0.90, 0.50, D (0.15, 0.060), D (0.15, 0.10, W (0.20, 0.15, 0.125, 0.40), 0.075, 0.07, E (0.40, 0.15, 0.10, 0.08) 0.075, 0.07, C (0.25), 0.10, 0.075, 0.05), 0.05), D (0.15) 0.060), E (0.10, 0.08) E (0.10) W (0.075, 0.060) D (0.15, B (1.10, 0.70, C (0.30, 0.25, 0.125, 0.10, 0.225), 0.50, 0.45), 0.05), E (0.15, C (0.20), D (0.15, 0.10, E (0.15, 0.10, 0.125, 0.10) 0.05), D (0.05, 0.15, 0.070, 0.060, E (0.15, 0.10) 0.10) 0.050) Notes • ESR limits in Ω are shown in parenthesis (1) 125 °C life test post test limits per AEC-Q200 Revision: 28-Feb-2023 Document Number: 40080 3 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Upgrade for High Reliability With T83 TR3 www.vishay.com Vishay Sprague RATINGS AND CASE CODES μF 4V 6.3 V 10 V D (0.15, 0.125, 0.10, D (0.15, 0.06, 0.05, 0.125, 0.10), D (0.10, 0.45, 0.45, 0.35), 330 E (0.10, 0.06), 0.035, 0.15) E (0.15, 0.10, W (0.10, 0.06, 0.05), 0.04) W (0.10, 0.06, 0.04) D (0.20, 0.15, D (0.125, 0.125, 0.10), E (0.20, 0.15, 0.10, 0.06, E (0.10, 470 0.045, 0.035) 0.065, 0.06, 0.10, 0.075), W (0.10, 0.06, E (0.10, 0.05), 0.05) 0.045, 0.035) W (0.10, 0.06, 0.05) D (0.10, 0.06), 680 E (0.10, 0.04) E (0.10) E (0.20, 0.15, 1000 E (0.10) 0.10), W (0.05) Note • ESR limits in Ω are shown in parenthesis 16 V 20 V 25 V 35 V 50 V 63 V 75 V MARKING Indicates lead (Pb)-free Capacitance code, pF Date code designation V 104L Voltage code Polarity band (+) A Case “A” CASE VOLTAGE CODE VOLTS CODE 4.0 G 6.3 J 10 A 16 C 20 D 25 E 35 V 50 T 75 S Voltage Capacitance, μF Polarity band (+) Indicates lead (Pb)-free 22 10L XX 2 Vishay marking Date code B, C, D, E, W Cases Marking Capacitor marking includes an anode (+) polarity band, capacitance in microfarads and the voltage rating. “A” case capacitors use a letter code for the voltage and EIA capacitance code. The Vishay identification marking is included if space permits. Vishay marking (“circled 2”) may show additives in the form of short lines, depicting actual manufacturing facility. For A case capacitors discontinuation in polarity bar maybe used as actual manufacturing facility designation. Capacitors rated at 6.3 V are marked 6 V. A manufacturing date code is marked on all capacitors, for details see FAQ: www.vishay.com/doc?40110. Capacitors may bear different marking scheme if parts are substituted with high performance Vishay Automotive Grade TP3 family or low DCL TX3 family products. Marking examples are shown below. Call the factory for further explanation. ADDITIONAL MARKING EXAMPLES TP3 MARKING Capacitance code, pF Indicates high performance (1) Date code designation Capacitance μF Indicates high performance (1) Voltage V 104Z Voltage Polarity band (+) code A Case Polarity band (+) Date code 22 P10 XX 2 Vishay marking B, C, D, E Cases Note Capital letter indicates lead (Pb)-free (1) Revision: 28-Feb-2023 Document Number: 40080 4 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Upgrade for High Reliability With T83 TR3 www.vishay.com Vishay Sprague ADDITIONAL MARKING EXAMPLES TX3 MARKING Indicates low DCL Capacitance, µF product series (1) Rated voltage, V 22X16 Polarity band (+) YY 2 digits date code 2 Vishay marking B, C Cases Note (1) Capital letter indicates lead (Pb)-free STANDARD RATINGS CAPACITANCE (μF) CASE CODE 15 22 33 33 47 47 47 68 68 100 100 100 150 150 150 150 150 220 220 220 220 220 220 220 220 330 330 330 330 A A A B A A B B C A B C B B B C D B B B B C D D D D D D D PART NUMBER MAX. DCL AT +25 °C (μA) 4 VDC AT +85 °C; 2.7 VDC AT +125 °C TR3A156(1)004(2)1500 0.6 TR3A226(1)004(2)1500 0.9 TR3A336(1)004(2)1500 1.3 TR3B336(1)004(2)0500 1.3 TR3A476(1)004(2)0800 1.9 TR3A476(1)004(2)0500 1.9 TR3B476(1)004(2)0500 1.9 TR3B686(1)004(2)0500 2.7 TR3C686(1)004(2)0275 2.7 TR3A107M004(2)1000 10.0 TR3B107(1)004(2)0450 4.0 TR3C107(1)004(2)0225 4.0 TR3B157(1)004(2)0900 6.0 TR3B157(1)004(2)0500 6.0 TR3B157(1)004(2)0400 6.0 TR3C157(1)004(2)0250 6.0 TR3D157(1)004(2)0150 6.0 TR3B227M004(2)1100 8.8 TR3B227M004(2)0700 8.8 TR3B227M004(2)0500 8.8 TR3B227M004(2)0450 8.8 TR3C227(1)004(2)0200 8.8 TR3D227(1)004(3)0050 8.8 TR3D227(1)004(2)0150 8.8 TR3D227(1)004(2)0100 8.8 TR3D337(1)004(2)0100 13.2 TR3D337(1)004(3)0045 13.2 TR3D337(1)004(3)0035 13.2 TR3D337(1)004(2)0150 13.2 MAX. DF AT +25 °C 120 Hz (%) MAX. ESR AT +25 °C 100 kHz (Ω) MAX. RIPPLE 100 kHz IRMS (A) 6 6 6 6 14 14 6 6 6 30 8 6 14 14 14 12 8 18 18 18 18 8 8 8 8 8 8 8 8 1.500 1.500 1.500 0.500 0.800 0.500 0.500 0.500 0.275 1.000 0.450 0.225 0.900 0.500 0.400 0.250 0.150 1.100 0.700 0.500 0.450 0.200 0.050 0.150 0.100 0.100 0.045 0.035 0.150 0.22 0.22 0.22 0.41 0.31 0.39 0.41 0.41 0.63 0.27 0.43 0.70 0.31 0.41 0.46 0.66 1.00 0.28 0.35 0.41 0.43 0.74 1.73 1.00 1.22 1.22 1.83 2.07 1.00 Note • Part number definitions: (1) Capacitance tolerance codes: K, M (2) Terminations and packaging codes: C, D, E, F, V, U, T, W (3) Lead (Pb)-free terminations and packaging codes: C, D, V, U Revision: 28-Feb-2023 Document Number: 40080 5 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Upgrade for High Reliability With T83 TR3 www.vishay.com Vishay Sprague STANDARD RATINGS CAPACITANCE (μF) CASE CODE PART NUMBER 470 470 470 470 470 470 470 470 680 680 680 680 1000 D D D D D E E E D D E E E TR3D477(1)004(2)0125 TR3D477(1)004(2)0100 TR3D477(1)004(2)0060 TR3D477(1)004(3)0045 TR3D477(1)004(3)0035 TR3E477(1)004(2)0100 TR3E477(1)004(3)0045 TR3E477(1)004(3)0035 TR3D687M004(2)0100 TR3D687M004(3)0060 TR3E687(1)004(2)0100 TR3E687(1)004(3)0040 TR3E108M004(2)0100 3.3 6.8 10 10 10 15 15 22 22 22 22 22 22 33 33 33 33 33 33 33 47 47 47 47 47 47 47 68 68 68 A A A A B A A A A A A B C A A A B B B B A B B B B C C B B B TR3A335(1)6R3(2)2100 TR3A685(1)6R3(2)1800 TR3A106(1)6R3(2)2000 TR3A106(1)6R3(2)1500 TR3B106(1)6R3(2)1500 TR3A156(1)6R3(2)2000 TR3A156(1)6R3(2)1000 TR3A226(1)6R3(2)3000 TR3A226(1)6R3(2)2000 TR3A226(1)6R3(2)1000 TR3A226(1)6R3(2)0900 TR3B226(1)6R3(2)0600 TR3C226(1)6R3(2)0500 TR3A336(1)6R3(2)2000 TR3A336(1)6R3(2)0800 TR3A336(1)6R3(2)0600 TR3B336(1)6R3(2)0450 TR3B336(1)6R3(2)0350 TR3B336(1)6R3(2)0600 TR3B336(1)6R3(2)0500 TR3A476(1)6R3(2)0800 TR3B476(1)6R3(2)0550 TR3B476(1)6R3(2)0500 TR3B476(1)6R3(2)0350 TR3B476(1)6R3(2)0250 TR3C476(1)6R3(2)0300 TR3C476(1)6R3(2)0250 TR3B686(1)6R3(2)0650 TR3B686(1)6R3(2)0550 TR3B686(1)6R3(2)0500 MAX. DCL AT +25 °C (μA) MAX. DF AT +25 °C 120 Hz (%) MAX. ESR AT +25 °C 100 kHz (Ω) MAX. RIPPLE 100 kHz IRMS (A) 10 10 10 10 10 10 10 10 25 25 12 12 20 0.125 0.100 0.060 0.045 0.035 0.100 0.045 0.035 0.100 0.060 0.100 0.040 0.100 1.10 1.22 1.58 1.83 2.07 1.28 1.91 2.17 1.22 1.58 1.28 1.37 1.28 6 6 6 6 6 6 6 6 6 6 6 6 6 14 14 14 6 6 6 6 12 6 6 6 6 6 6 6 6 6 2.100 1.800 2.000 1.500 1.500 2.000 1.000 3.000 2.000 1.000 0.900 0.600 0.500 2.000 0.800 0.600 0.450 0.350 0.600 0.500 0.800 0.550 0.500 0.350 0.250 0.300 0.250 0.650 0.550 0.500 0.19 0.20 0.19 0.22 0.24 0.19 0.27 0.16 0.19 0.27 0.29 0.38 0.47 0.19 0.31 0.35 0.43 0.49 0.38 0.41 0.31 0.39 0.41 0.49 0.58 0.61 0.66 0.36 0.39 0.41 4 VDC AT +85 °C; 2.7 VDC AT +125 °C 18.8 18.8 18.8 18.8 18.8 18.8 18.8 18.8 27.2 27.2 27.2 27.2 40.0 6.3 VDC AT +85 °C; 4 VDC AT +125 °C 0.5 0.5 0.6 0.6 0.6 0.9 0.9 1.4 1.4 1.4 1.4 1.4 1.3 2.0 2.0 2.0 2.0 2.0 2.0 2.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 4.3 4.3 4.3 Note • Part number definitions: (1) Capacitance tolerance codes: K, M (2) Terminations and packaging codes: C, D, E, F, V, U, T, W (3) Lead (Pb)-free terminations and packaging codes: C, D, V, U Revision: 28-Feb-2023 Document Number: 40080 6 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Upgrade for High Reliability With T83 TR3 www.vishay.com Vishay Sprague STANDARD RATINGS CAPACITANCE (μF) CASE CODE 68 68 68 68 68 68 68 100 100 100 100 100 100 100 100 100 100 100 150 150 150 150 150 150 150 150 220 220 220 220 220 220 220 220 330 330 330 330 330 330 330 330 330 330 330 330 330 470 470 B B C C C D D B B B B C C C C C D D C C D D D D D E C C C D D D E E D D D D D D D E E E W W W D D PART NUMBER MAX. DCL AT +25 °C (μA) 6.3 VDC AT +85 °C; 4 VDC AT +125 °C TR3B686(1)6R3(2)0350 4.3 TR3B686(1)6R3(2)0250 4.3 TR3C686(1)6R3(2)0275 4.3 TR3C686(1)6R3(2)0250 4.3 TR3C686(1)6R3(2)0200 4.3 TR3D686(1)6R3(2)0200 4.3 TR3D686(1)6R3(2)0175 4.3 TR3B107(1)6R3(2)1500 6.3 TR3B107(1)6R3(2)0500 6.3 TR3B107(1)6R3(2)0400 6.3 TR3B107(1)6R3(2)0250 6.3 TR3C107(1)6R3(2)0300 6.3 TR3C107(1)6R3(2)0250 6.3 TR3C107(1)6R3(2)0150 6.3 TR3C107(1)6R3(2)0125 6.3 TR3C107(1)6R3(2)0100 6.3 TR3D107(1)6R3(2)0150 6.3 TR3D107(1)6R3(2)0140 6.3 TR3C157(1)6R3(2)0300 9.4 TR3C157(1)6R3(2)0200 9.4 TR3D157(1)6R3(2)0150 9.4 TR3D157(1)6R3(2)0125 9.4 TR3D157(1)6R3(2)0075 9.4 TR3D157(1)6R3(2)0070 9.4 TR3D157(1)6R3(3)0050 9.4 TR3E157(1)6R3(2)0100 9.4 TR3C227(1)6R3(2)0300 13.9 TR3C227(1)6R3(2)0250 13.9 TR3C227(1)6R3(2)0225 13.9 TR3D227(1)6R3(2)0150 13.9 TR3D227(1)6R3(2)0100 13.9 TR3D227(1)6R3(3)0050 13.9 TR3E227(1)6R3(2)0150 13.9 TR3E227(1)6R3(2)0100 13.9 TR3D337(1)6R3(2)0150 20.8 TR3D337(1)6R3(2)0125 20.8 TR3D337(1)6R3(2)0100 20.8 TR3D337(1)6R3(2)0060 20.8 TR3D337(1)6R3(3)0050 20.8 TR3D337(1)6R3(3)0045 20.8 TR3D337(1)6R3(3)0035 20.8 TR3E337(1)6R3(3)0150 20.8 TR3E337(1)6R3(2)0100 20.8 TR3E337(1)6R3(2)0050 20.8 TR3W337(1)6R3(3)0100 20.8 TR3W337(1)6R3(3)0060 20.8 TR3W337(1)6R3(3)0040 20.8 TR3D477(1)6R3(2)0200 29.6 TR3D477(1)6R3(2)0150 29.6 MAX. DF AT +25 °C 120 Hz (%) MAX. ESR AT +25 °C 100 kHz (Ω) MAX. RIPPLE 100 kHz IRMS (A) 6 6 6 6 6 6 4 15 15 15 15 6 6 6 6 6 6 6 8 8 8 8 8 8 8 8 14 14 14 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 14 14 0.350 0.250 0.275 0.250 0.200 0.200 0.175 1.500 0.500 0.400 0.250 0.300 0.250 0.150 0.125 0.100 0.150 0.140 0.300 0.200 0.150 0.125 0.075 0.070 0.050 0.100 0.300 0.250 0.225 0.150 0.100 0.050 0.150 0.100 0.150 0.125 0.100 0.060 0.050 0.045 0.035 0.150 0.100 0.050 0.100 0.060 0.040 0.200 0.150 0.49 0.58 0.63 0.66 0.74 0.87 0.93 0.24 0.41 0.46 0.58 0.61 0.66 0.86 0.94 1.05 1.00 1.04 0.61 0.74 1.00 1.10 1.41 1.46 1.73 1.28 0.61 0.66 0.70 1.00 1.22 1.73 1.05 1.28 1.00 1.10 1.22 1.58 1.73 1.83 2.07 1.05 1.28 1.82 1.58 2.04 2.50 0.87 1.00 Note • Part number definitions: (1) Capacitance tolerance codes: K, M (2) Terminations and packaging codes: C, D, E, F, V, U, T, W (3) Lead (Pb)-free terminations and packaging codes: C, D, V, U Revision: 28-Feb-2023 Document Number: 40080 7 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Upgrade for High Reliability With T83 TR3 www.vishay.com Vishay Sprague STANDARD RATINGS CAPACITANCE (μF) CASE CODE 470 470 470 470 470 470 470 470 470 680 1000 1000 1000 1000 D D E E E E W W W E E E E W 2.2 2.2 2.2 4.7 4.7 4.7 4.7 4.7 6.8 6.8 6.8 10 10 10 10 10 10 10 15 15 15 15 15 15 22 22 22 22 22 22 22 22 A A A A A A A B A A B A A A A B B B A A B B B C A A A A B B B B PART NUMBER MAX. DCL AT +25 °C (μA) 6.3 VDC AT +85 °C; 4 VDC AT +125 °C TR3D477(1)6R3(2)0125 29.6 TR3D477(1)6R3(3)0100 29.6 TR3E477(1)6R3(2)0100 29.6 TR3E477(1)6R3(3)0065 29.6 TR3E477(1)6R3(3)0060 29.6 TR3E477(1)6R3(3)0050 29.6 TR3W477(1)6R3(3)0100 29.6 TR3W477(1)6R3(3)0060 29.6 TR3W477(1)6R3(3)0050 29.6 TR3E687(1)6R3(2)0100 42.8 TR3E108M6R3(2)0200 63.0 TR3E108M6R3(2)0150 63.0 TR3E108M6R3(3)0100 63.0 TR3W108(1)6R3(3)0050 60.0 10 VDC AT +85 °C; 7 VDC AT +125 °C TR3A225(1)010(2)6800 0.5 TR3A225(1)010(2)6000 0.5 TR3A225(1)010(2)1800 0.5 TR3A475(1)010(2)3000 0.5 TR3A475(1)010(2)1500 0.5 TR3A475(1)010(2)1400 0.5 TR3A475(1)010(2)1000 0.5 TR3B475(1)010(2)1400 0.5 TR3A685(1)010(2)3000 0.7 TR3A685(1)010(2)1800 0.7 TR3B685(1)010(2)1300 0.7 TR3A106(1)010(2)2000 1.0 TR3A106(1)010(2)1800 1.0 TR3A106(1)010(2)1000 1.0 TR3A106(1)010(2)0900 1.0 TR3B106(1)010(2)1000 1.0 TR3B106(1)010(2)0800 1.0 TR3B106(1)010(2)0750 1.0 TR3A156(1)010(2)2000 1.5 TR3A156(1)010(2)1000 1.5 TR3B156(1)010(2)0600 1.5 TR3B156(1)010(2)0450 1.5 TR3B156(1)010(2)0700 1.5 TR3C156(1)010(2)0700 1.5 TR3A226(1)010(2)1500 2.2 TR3A226(1)010(2)1000 2.2 TR3A226(1)010(2)0900 2.2 TR3A226(1)010(2)0800 2.2 TR3B226(1)010(2)1000 2.2 TR3B226(1)010(2)0700 2.2 TR3B226(1)010(2)0500 2.2 TR3B226(1)010(2)0400 2.2 MAX. DF AT +25 °C 120 Hz (%) MAX. ESR AT +25 °C 100 kHz (Ω) MAX. RIPPLE 100 kHz IRMS (A) 14 14 10 10 10 10 20 20 20 20 30 30 30 16 0.125 0.100 0.100 0.065 0.060 0.050 0.100 0.060 0.050 0.100 0.200 0.150 0.100 0.050 1.10 1.22 1.28 1.59 1.66 1.82 1.58 2.04 2.24 1.28 0.91 1.05 1.28 2.24 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 8 8 8 8 6 6 6 6 6.800 6.000 1.800 3.000 1.500 1.400 1.000 1.400 3.000 1.800 1.300 2.000 1.800 1.000 0.900 1.000 0.800 0.750 2.000 1.000 0.600 0.450 0.700 0.700 1.500 1.000 0.900 0.800 1.000 0.700 0.500 0.400 0.11 0.11 0.20 0.16 0.22 0.23 0.27 0.25 0.16 0.20 0.26 0.19 0.20 0.27 0.29 0.29 0.33 0.34 0.19 0.27 0.38 0.43 0.35 0.40 0.22 0.27 0.29 0.31 0.29 0.35 0.41 0.46 Note • Part number definitions: (1) Capacitance tolerance codes: K, M (2) Terminations and packaging codes: C, D, E, F, V, U, T, W (3) Lead (Pb)-free terminations and packaging codes: C, D, V, U Revision: 28-Feb-2023 Document Number: 40080 8 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Upgrade for High Reliability With T83 TR3 www.vishay.com Vishay Sprague STANDARD RATINGS MAX. DF AT +25 °C 120 Hz (%) MAX. ESR AT +25 °C 100 kHz (Ω) MAX. RIPPLE 100 kHz IRMS (A) 2.2 6 0.400 0.52 2.2 6 0.345 0.56 TR3C226(1)010(2)0300 2.2 6 0.300 0.61 B TR3B336(1)010(2)1400 3.3 6 1.400 0.25 33 B TR3B336(1)010(2)0650 3.3 6 0.650 0.36 33 B TR3B336(1)010(2)0600 3.3 6 0.600 0.38 CAPACITANCE (μF) CASE CODE PART NUMBER 22 C TR3C226(1)010(2)0400 22 C TR3C226(1)010(2)0345 22 C 33 MAX. DCL AT +25 °C (μA) 10 VDC AT +85 °C; 7 VDC AT +125 °C 33 B TR3B336(1)010(2)0500 3.3 6 0.500 0.41 33 B TR3B336(1)010(2)0425 3.3 6 0.425 0.45 33 B TR3B336(1)010(2)0300 3.3 6 0.300 0.53 33 C TR3C336(1)010(2)0375 3.3 6 0.375 0.54 33 C TR3C336(1)010(2)0300 3.3 6 0.300 0.61 47 B TR3B476(1)010(2)0650 4.7 6 0.650 0.36 47 B TR3B476(1)010(2)0600 4.7 6 0.600 0.38 47 B TR3B476(1)010(2)0500 4.7 6 0.500 0.41 47 B TR3B476(1)010(2)0350 4.7 6 0.350 0.49 47 C TR3C476(1)010(2)0350 4.7 6 0.350 0.56 47 C TR3C476(1)010(2)0300 4.7 6 0.300 0.61 47 C TR3C476(1)010(2)0200 4.7 6 0.200 0.74 47 D TR3D476(1)010(2)0220 4.7 6 0.220 0.83 47 D TR3D476(1)010(2)0200 4.7 6 0.200 0.87 47 D TR3D476(1)010(2)0140 4.7 6 0.140 1.04 47 D TR3D476(1)010(2)0135 4.7 6 0.135 1.05 47 D TR3D476(1)010(2)0100 4.7 6 0.100 1.22 68 B TR3B686(1)010(2)1500 6.8 14 1.500 0.24 68 B TR3B686(1)010(2)0900 6.8 14 0.900 0.31 68 B TR3B686(1)010(2)0750 6.8 14 0.750 0.34 68 B TR3B686(1)010(2)0600 6.8 14 0.600 0.38 68 C TR3C686(1)010(2)0300 6.8 6 0.300 0.61 68 C TR3C686(1)010(2)0275 6.8 6 0.275 0.63 68 C TR3C686(1)010(2)0225 6.8 6 0.225 0.70 68 C TR3C686(1)010(2)0200 6.8 6 0.200 0.74 68 D TR3D686(1)010(2)0200 6.8 6 0.200 0.87 68 D TR3D686(1)010(2)0150 6.8 6 0.150 1.00 68 D TR3D686(1)010(2)0100 6.8 6 0.100 1.22 68 D TR3D686(1)010(3)0070 6.8 6 0.070 1.46 68 E TR3E686(1)010(2)0150 6.8 4 0.150 1.05 100 B TR3B107M010(2)1400 10.0 25 1.400 0.25 100 C TR3C107(1)010(2)0200 10.0 8 0.200 0.74 100 C TR3C107(1)010(2)0150 10.0 8 0.150 0.86 100 C TR3C107(1)010(2)0100 10.0 8 0.100 1.05 100 D TR3D107(1)010(2)0150 10.0 6 0.150 1.00 100 D TR3D107(1)010(2)0100 10.0 6 0.100 1.22 100 D TR3D107(1)010(2)0080 10.0 6 0.080 1.37 Note • Part number definitions: (1) Capacitance tolerance codes: K, M (2) Terminations and packaging codes: C, D, E, F, V, U, T, W (3) Lead (Pb)-free terminations and packaging codes: C, D, V, U Revision: 28-Feb-2023 Document Number: 40080 9 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Upgrade for High Reliability With T83 TR3 www.vishay.com Vishay Sprague STANDARD RATINGS MAX. DF AT +25 °C 120 Hz (%) MAX. ESR AT +25 °C 100 kHz (Ω) MAX. RIPPLE 100 kHz IRMS (A) 10.0 6 0.070 1.52 TR3D107(1)010(3)0065 10.0 6 0.065 1.46 TR3D107(1)010(3)0050 10.0 6 0.050 1.73 CAPACITANCE (μF) CASE CODE PART NUMBER 100 D TR3D107(1)010(3)0070 100 D 100 D MAX. DCL AT +25 °C (μA) 10 VDC AT +85 °C; 7 VDC AT +125 °C 100 E TR3E107(1)010(2)0125 10.0 6 0.125 1.15 100 E TR3E107(1)010(2)0150 10.0 6 0.150 1.05 100 E TR3E107(1)010(2)0100 10.0 6 0.100 1.28 150 C TR3C157(1)010(2)0500 15.0 20 0.500 0.47 150 D TR3D157(1)010(2)0150 15.0 8 0.150 1.00 150 D TR3D157(1)010(2)0100 15.0 8 0.100 1.22 150 D TR3D157(1)010(2)0075 15.0 8 0.075 1.41 150 D TR3D157(1)010(3)0070 15.0 8 0.070 1.46 150 D TR3D157(1)010(3)0050 15.0 8 0.050 1.73 150 E TR3E157(1)010(2)0100 15.0 8 0.100 1.28 150 E TR3E157(1)010(2)0080 15.0 8 0.080 1.44 220 D TR3D227(1)010(2)0150 22.0 8 0.150 1.00 220 D TR3D227(1)010(2)0125 22.0 8 0.125 1.10 220 D TR3D227(1)010(2)0100 22.0 8 0.100 1.22 220 D TR3D227(1)010(3)0050 22.0 8 0.050 1.73 220 E TR3E227(1)010(2)0150 22.0 8 0.150 1.05 220 E TR3E227(1)010(2)0100 22.0 8 0.100 1.28 220 E TR3E227(1)010(3)0070 22.0 8 0.070 1.54 220 E TR3E227(1)010(3)0060 22.0 8 0.060 1.66 220 E TR3E227(1)010(3)0050 22.0 8 0.050 1.82 330 D TR3D337(1)010(2)0150 33.0 15 0.150 1.00 330 D TR3D337(1)010(2)0125 33.0 15 0.125 1.10 330 D TR3D337(1)010(2)0100 33.0 15 0.100 1.22 330 E TR3E337(1)010(2)0100 33.0 10 0.100 1.28 330 E TR3E337(1)010(3)0060 33.0 10 0.060 1.66 330 W TR3W337(1)010(3)0100 33.0 10 0.100 1.58 330 W TR3W337(1)010(3)0060 33.0 10 0.060 2.04 330 W TR3W337(1)010(3)0040 33.0 10 0.040 2.50 470 E TR3E477(1)010(2)0200 47.0 15 0.200 0.91 470 E TR3E477(1)010(2)0150 47.0 15 0.150 1.05 470 E TR3E477(1)010(2)0100 47.0 15 0.100 1.28 470 E TR3E477(1)010(3)0075 47.0 15 0.075 1.48 470 W TR3W477(1)010(3)0100 47.0 20 0.100 1.58 470 W TR3W477(1)010(3)0060 47.0 20 0.060 2.04 470 W TR3W477(1)010(3)0050 47.0 20 0.050 2.24 Note • Part number definitions: (1) Capacitance tolerance codes: K, M (2) Terminations and packaging codes: C, D, E, F, V, U, T, W (3) Lead (Pb)-free terminations and packaging codes: C, D, V, U Revision: 28-Feb-2023 Document Number: 40080 10 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Upgrade for High Reliability With T83 TR3 www.vishay.com Vishay Sprague STANDARD RATINGS CAPACITANCE (μF) CASE CODE 1.0 2.2 2.2 2.2 3.3 3.3 3.3 4.7 4.7 4.7 4.7 4.7 4.7 6.8 6.8 6.8 6.8 10 10 10 10 10 10 15 15 15 22 22 22 22 22 22 22 33 33 33 33 33 33 33 33 47 47 47 47 47 47 47 47 47 A A A A A A B A A A A B B A A B B A B B C C C B B C B B B B C C D B B B C C D D D C C C D D D D D D PART NUMBER MAX. DCL AT +25 °C (μA) 16 VDC AT +85 °C; 10 VDC AT +125 °C TR3A105(1)016(2)6200 0.5 TR3A225(1)016(2)4000 0.5 TR3A225(1)016(2)3500 0.5 TR3A225(1)016(2)1800 0.5 TR3A335(1)016(2)4000 0.5 TR3A335(1)016(2)3500 0.5 TR3B335(1)016(2)2500 0.5 TR3A475(1)016(2)3000 0.8 TR3A475(1)016(2)2500 0.8 TR3A475(1)016(2)2000 0.8 TR3A475(1)016(2)1500 0.8 TR3B475(1)016(2)1500 0.8 TR3B475(1)016(2)0800 0.8 TR3A685(1)016(2)3000 1.1 TR3A685(1)016(2)1500 1.1 TR3B685(1)016(2)1200 1.1 TR3B685(1)016(2)0600 1.1 TR3A106(1)016(2)1700 1.6 TR3B106(1)016(2)0800 1.6 TR3B106(1)016(2)0500 1.6 TR3C106(1)016(2)0600 1.6 TR3C106(1)016(2)0500 1.6 TR3C106(1)016(2)0450 1.6 TR3B156(1)016(2)0800 2.4 TR3B156(1)016(2)0500 2.4 TR3C156(1)016(2)0400 2.4 TR3B226(1)016(2)1000 3.5 TR3B226(1)016(2)0700 3.5 TR3B226(1)016(2)0600 3.5 TR3B226(1)016(2)0400 3.5 TR3C226(1)016(2)0375 3.5 TR3C226(1)016(2)0350 3.5 TR3D226(1)016(2)0250 3.5 TR3B336(1)016(2)0700 5.3 TR3B336(1)016(2)0500 5.3 TR3B336(1)016(2)0350 5.3 TR3C336(1)016(2)0300 5.3 TR3C336(1)016(2)0225 5.3 TR3D336(1)016(2)0250 5.3 TR3D336(1)016(2)0225 5.3 TR3D336(1)016(2)0150 5.3 TR3C476(1)016(2)0500 7.5 TR3C476(1)016(2)0350 7.5 TR3C476(1)016(2)0300 7.5 TR3D476(1)016(2)0200 7.5 TR3D476(1)016(2)0150 7.5 TR3D476(1)016(2)0120 7.5 TR3D476(1)016(2)0100 7.5 TR3D476(1)016(3)0080 7.5 TR3D476(1)016(3)0070 7.5 MAX. DF AT +25 °C 120 Hz (%) MAX. ESR AT +25 °C 100 kHz (Ω) MAX. RIPPLE 100 kHz IRMS (A) 4 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 4 6 6 6 6 6 6 6 6 6 6 6.200 4.000 3.500 1.800 4.000 3.500 2.500 3.000 2.500 2.000 1.500 1.500 0.800 3.000 1.500 1.200 0.600 1.700 0.800 0.500 0.600 0.500 0.450 0.800 0.500 0.400 1.000 0.700 0.600 0.400 0.375 0.350 0.250 0.700 0.500 0.350 0.300 0.225 0.250 0.225 0.150 0.500 0.350 0.300 0.200 0.150 0.120 0.100 0.080 0.070 0.11 0.14 0.15 0.20 0.14 0.15 0.18 0.16 0.17 0.19 0.22 0.24 0.33 0.16 0.22 0.27 0.38 0.21 0.33 0.41 0.43 0.47 0.49 0.33 0.41 0.52 0.29 0.35 0.38 0.46 0.54 0.56 0.77 0.35 0.41 0.49 0.61 0.70 0.77 0.82 1.00 0.47 0.56 0.61 0.87 1.00 1.12 1.22 1.37 1.46 Note • Part number definitions: (1) Capacitance tolerance codes: K, M (2) Terminations and packaging codes: C, D, E, F, V, U, T, W (3) Lead (Pb)-free terminations and packaging codes: C, D, V, U Revision: 28-Feb-2023 Document Number: 40080 11 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Upgrade for High Reliability With T83 TR3 www.vishay.com Vishay Sprague STANDARD RATINGS CAPACITANCE (μF) CASE CODE 68 68 68 100 100 100 100 100 100 100 150 150 150 150 150 150 150 150 150 150 150 150 150 150 220 220 220 D D D D D D D E E E D D D D D D D E E E E E W W E E E 1.0 1.0 1.5 2.2 2.2 3.3 3.3 4.7 4.7 4.7 4.7 6.8 6.8 6.8 6.8 6.8 10 10 10 10 10 10 10 A A A A A A B A A B B A A A B B B B C C C C C PART NUMBER MAX. DCL AT +25 °C (μA) 16 VDC AT +85 °C; 10 VDC AT +125 °C TR3D686(1)016(2)0150 10.9 TR3D686(1)016(2)0100 10.9 TR3D686(1)016(3)0070 10.9 TR3D107(1)016(2)0150 16.0 TR3D107(1)016(2)0125 16.0 TR3D107(1)016(2)0100 16.0 TR3D107(1)016(3)0075 16.0 TR3E107(1)016(2)0150 16.0 TR3E107(1)016(2)0125 16.0 TR3E107(1)016(2)0100 16.0 TR3D157(1)016(2)0400 24.0 TR3D157(1)016(2)0150 24.0 TR3D157(1)016(2)0125 24.0 TR3D157(1)016(2)0100 24.0 TR3D157(1)016(2)0085 24.0 TR3D157(1)016(3)0075 24.0 TR3D157(1)016(3)0060 24.0 TR3E157(1)016(2)0400 24.0 TR3E157(1)016(2)0150 24.0 TR3E157(1)016(2)0100 24.0 TR3E157(1)016(3)0075 24.0 TR3E157(1)016(3)0060 24.0 TR3W157(1)016(3)0075 24.0 TR3W157(1)016(3)0060 24.0 TR3E227(1)016(2)0150 35.2 TR3E227(1)016(2)0125 35.2 TR3E227(1)016(2)0100 35.2 20 VDC AT +85 °C; 13 VDC AT +125 °C TR3A105(1)020(2)5500 0.5 TR3A105(1)020(2)3000 0.5 TR3A155(1)020(2)3000 0.5 TR3A225(1)020(2)4000 0.5 TR3A225(1)020(2)3000 0.5 TR3A335(1)020(2)4000 0.7 TR3B335(1)020(2)1300 0.7 TR3A475(1)020(2)3500 0.9 TR3A475(1)020(2)1800 0.9 TR3B475(1)020(2)1000 0.9 TR3B475(1)020(2)0750 0.9 TR3A685(1)020(2)3200 1.4 TR3A685(1)020(2)3000 1.4 TR3A685(1)020(2)2600 1.4 TR3B685(1)020(2)1000 1.4 TR3B685(1)020(2)0600 1.4 TR3B106(1)020(2)1000 2.0 TR3B106(1)020(2)0500 2.0 TR3C106(1)020(2)0700 2.0 TR3C106(1)020(2)0500 2.0 TR3C106(1)020(2)0475 2.0 TR3C106(1)020(2)0450 2.0 TR3C106(1)020(2)0400 2.0 MAX. DF AT +25 °C 120 Hz (%) MAX. ESR AT +25 °C 100 kHz (Ω) MAX. RIPPLE 100 kHz IRMS (A) 6 6 6 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 10 10 14 14 14 0.150 0.100 0.070 0.150 0.125 0.100 0.075 0.150 0.125 0.100 0.400 0.150 0.125 0.100 0.085 0.075 0.060 0.400 0.150 0.100 0.075 0.060 0.075 0.060 0.150 0.125 0.100 1.00 1.22 1.46 1.00 1.10 1.22 1.41 1.05 1.15 1.28 0.61 1.00 1.10 1.22 1.33 1.41 1.58 0.64 1.05 1.28 1.48 1.66 1.83 2.04 1.05 1.15 1.28 4 4 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 5.500 3.000 3.000 4.000 3.000 4.000 1.300 3.500 1.800 1.000 0.750 3.200 3.000 2.600 1.000 0.600 1.000 0.500 0.700 0.500 0.475 0.450 0.400 0.12 0.16 0.16 0.14 0.16 0.14 0.26 0.15 0.20 0.29 0.34 0.15 0.16 0.17 0.29 0.38 0.29 0.41 0.40 0.47 0.48 0.49 0.52 Note • Part number definitions: (1) Capacitance tolerance codes: K, M (2) Terminations and packaging codes: C, D, E, F, V, U, T, W (3) Lead (Pb)-free terminations and packaging codes: C, D, V, U Revision: 28-Feb-2023 Document Number: 40080 12 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Upgrade for High Reliability With T83 TR3 www.vishay.com Vishay Sprague STANDARD RATINGS CAPACITANCE (μF) CASE CODE 15 15 15 22 22 22 22 22 22 22 22 22 33 33 33 33 33 33 47 47 47 47 47 47 68 68 68 68 68 68 68 68 100 100 100 100 100 100 100 100 100 100 100 100 150 150 150 150 B B C B B B B C C D D D C C C D D D D D D D E E D D D D E E E E D D D D D E E E W W W W W W W W PART NUMBER MAX. DCL AT +25 °C (μA) 20 VDC AT +85 °C; 13 VDC AT +125 °C TR3B156(1)020(2)1000 3.0 TR3B156(1)020(2)0500 3.0 TR3C156(1)020(2)0400 3.0 TR3B226(1)020(2)0800 4.4 TR3B226(1)020(2)0700 4.4 TR3B226(1)020(2)0600 4.4 TR3B226(1)020(2)0400 4.4 TR3C226(1)020(2)0400 4.4 TR3C226(1)020(2)0375 4.4 TR3D226(1)020(2)0300 4.4 TR3D226(1)020(2)0225 3.5 TR3D226(1)020(2)0200 4.4 TR3C336(1)020(2)0350 6.6 TR3C336(1)020(2)0300 6.6 TR3C336(1)020(2)0200 6.6 TR3D336(1)020(2)0400 6.6 TR3D336(1)020(2)0250 6.6 TR3D336(1)020(2)0200 6.6 TR3D476(1)020(2)0200 9.4 TR3D476(1)020(2)0175 9.4 TR3D476(1)020(2)0150 9.4 TR3D476(1)020(3)0100 9.4 TR3E476(1)020(2)0150 9.4 TR3E476(1)020(3)0125 9.4 TR3D686(1)020(2)0200 13.6 TR3D686(1)020(2)0175 13.6 TR3D686(1)020(2)0150 13.6 TR3D686(1)020(2)0115 13.6 TR3E686(1)020(2)0200 13.6 TR3E686(1)020(2)0150 13.6 TR3E686(1)020(2)0125 13.6 TR3E686(1)020(2)0120 13.6 TR3D107(1)020(2)0200 20.0 TR3D107(1)020(2)0150 20.0 TR3D107(1)020(2)0100 20.0 TR3D107(1)020(3)0085 20.0 TR3D107(1)020(3)0080 20.0 TR3E107(1)020(2)0200 20.0 TR3E107(1)020(2)0150 20.0 TR3E107(1)020(2)0100 20.0 TR3W107(1)020(3)0200 20.0 TR3W107(1)020(3)0100 20.0 TR3W107(1)020(3)0080 20.0 TR3W107(1)020(3)0060 20.0 TR3W157(1)020(3)0200 30.0 TR3W157(1)020(3)0150 30.0 TR3W157(1)020(3)0100 30.0 TR3W157(1)020(3)0080 30.0 MAX. DF AT +25 °C 120 Hz (%) MAX. ESR AT +25 °C 100 kHz (Ω) MAX. RIPPLE 100 kHz IRMS (A) 6 6 6 6 6 6 6 6 6 6 4 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 8 8 8 8 8 8 8 8 8 8 8 8 10 10 10 10 1.000 0.500 0.400 0.800 0.700 0.600 0.400 0.400 0.375 0.300 0.225 0.200 0.350 0.300 0.200 0.400 0.250 0.200 0.200 0.175 0.150 0.100 0.150 0.125 0.200 0.175 0.150 0.115 0.200 0.150 0.125 0.120 0.200 0.150 0.100 0.085 0.080 0.200 0.150 0.100 0.200 0.100 0.080 0.060 0.200 0.150 0.100 0.080 0.29 0.41 0.52 0.33 0.35 0.38 0.46 0.52 0.54 0.71 0.82 0.87 0.56 0.61 0.74 0.61 0.77 0.87 0.87 0.93 1.00 1.22 1.05 1.15 0.87 0.93 1.00 1.14 0.91 1.05 1.15 1.17 0.87 1.00 1.22 1.33 1.37 0.91 1.05 1.28 1.12 1.58 1.77 2.04 1.12 1.29 1.58 1.77 Note • Part number definitions: (1) Capacitance tolerance codes: K, M (2) Terminations and packaging codes: C, D, E, F, V, U, T, W (3) Lead (Pb)-free terminations and packaging codes: C, D, V, U Revision: 28-Feb-2023 Document Number: 40080 13 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Upgrade for High Reliability With T83 TR3 www.vishay.com Vishay Sprague STANDARD RATINGS CAPACITANCE (μF) CASE CODE 0.47 0.68 1.0 1.5 1.5 1.5 2.2 2.2 2.2 2.2 2.2 3.3 3.3 3.3 3.3 3.3 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 10 10 10 10 10 10 10 10 10 10 15 15 15 15 15 A A A A A B A B B B B A A B B B A A B B B B C C B B B B B B C C B B B B C C C C D D B B B C C PART NUMBER MAX. DCL AT +25 °C (μA) 25 VDC AT +85 °C; 17 VDC AT +125 °C TR3A474(1)025(2)7000 0.5 TR3A684(1)025(2)6000 0.5 TR3A105(1)025(2)4000 0.5 TR3A155(1)025(2)4000 0.5 TR3A155(1)025(2)3000 0.5 TR3B155(1)025(2)1800 0.5 TR3A225(1)025(2)4000 0.6 TR3B225(1)025(2)1700 0.6 TR3B225(1)025(2)1500 0.6 TR3B225(1)025(2)1200 0.6 TR3B225(1)025(2)0900 0.6 TR3A335(1)025(2)3500 0.8 TR3A335(1)025(2)3000 0.8 TR3B335(1)025(2)2000 0.8 TR3B335(1)025(2)1500 0.8 TR3B335(1)025(2)0750 0.8 TR3A475(1)025(2)3500 1.2 TR3A475(1)025(2)3000 1.2 TR3B475(1)025(2)1500 1.2 TR3B475(1)025(2)1000 1.2 TR3B475(1)025(2)0900 1.2 TR3B475(1)025(2)0700 1.2 TR3C475(1)025(2)0600 1.2 TR3C475(1)025(2)0525 1.2 TR3B685(1)025(2)2000 1.7 TR3B685(1)025(2)1500 1.7 TR3B685(1)025(2)1200 1.7 TR3B685(1)025(2)0700 1.7 TR3B685(1)025(3)0500 1.7 TR3B685(1)025(3)0400 1.7 TR3C685(1)025(2)0600 1.7 TR3C685(1)025(2)0500 1.7 TR3B106(1)025(2)1300 2.5 TR3B106(1)025(2)1100 2.5 TR3B106(1)025(2)0900 2.5 TR3B106(1)025(2)0450 2.5 TR3C106(1)025(2)0600 2.5 TR3C106(1)025(2)0500 2.5 TR3C106(1)025(2)0450 2.5 TR3C106(1)025(2)0300 2.5 TR3D106(1)025(2)0400 2.5 TR3D106(1)025(2)0300 2.5 TR3B156(1)025(2)1000 3.8 TR3B156(1)025(2)0800 3.8 TR3B156(1)025(2)0600 3.8 TR3C156(1)025(2)0900 3.8 TR3C156(1)025(2)0425 3.8 MAX. DF AT +25 °C 120 Hz (%) MAX. ESR AT +25 °C 100 kHz (Ω) MAX. RIPPLE 100 kHz IRMS (A) 4 4 4 6 6 6 6 8 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 7.000 6.000 4.000 4.000 3.000 1.800 4.000 1.700 1.500 1.200 0.900 3.500 3.000 2.000 1.500 0.750 3.500 3.000 1.500 1.000 9.000 0.700 0.600 0.525 2.000 1.500 1.200 0.700 0.500 0.400 0.600 0.500 1.300 1.100 0.900 0.450 0.600 0.500 0.450 0.300 0.400 0.300 1.000 0.800 0.600 0.900 0.425 0.10 0.11 0.14 0.14 0.16 0.22 0.14 0.22 0.24 0.27 0.31 0.15 0.16 0.21 0.24 0.34 0.15 0.16 0.24 0.29 0.10 0.35 0.43 0.46 0.21 0.24 0.27 0.35 0.41 0.46 0.43 0.47 0.26 0.28 0.31 0.43 0.43 0.47 0.49 0.61 0.61 0.71 0.29 0.33 0.38 0.35 0.51 Note • Part number definitions: (1) Capacitance tolerance codes: K, M (2) Terminations and packaging codes: C, D, E, F, V, U, T, W (3) Lead (Pb)-free terminations and packaging codes: C, D, V, U Revision: 28-Feb-2023 Document Number: 40080 14 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Upgrade for High Reliability With T83 TR3 www.vishay.com Vishay Sprague STANDARD RATINGS MAX. DF AT +25 °C 120 Hz (%) MAX. ESR AT +25 °C 100 kHz (Ω) MAX. RIPPLE 100 kHz IRMS (A) 3.8 6 0.350 0.65 TR3D156(1)025(2)0275 3.8 6 0.275 0.74 TR3D156(1)025(2)0250 3.8 6 0.250 0.77 CAPACITANCE (μF) CASE CODE PART NUMBER 15 D TR3D156(1)025(2)0350 15 D 15 D MAX. DCL AT +25 °C (μA) 25 VDC AT +85 °C; 17 VDC AT +125 °C 15 D TR3D156(1)025(2)0200 3.8 6 0.200 0.87 22 C TR3C226(1)025(2)1000 5.5 6 1.000 0.33 22 C TR3C226(1)025(2)0900 5.5 6 0.900 0.35 22 C TR3C226(1)025(2)0425 5.5 6 0.425 0.51 22 C TR3C226(1)025(2)0400 5.5 6 0.400 0.52 22 C TR3C226(1)025(2)0300 5.5 6 0.300 0.61 22 C TR3C226(1)025(2)0275 5.5 6 0.275 0.63 22 C TR3C226(1)025(2)0250 5.5 6 0.250 0.66 22 D TR3D226(1)025(2)0300 5.5 6 0.300 0.71 22 D TR3D226(1)025(2)0200 5.5 6 0.200 0.87 22 E TR3E226(1)025(2)0300 5.5 6 0.300 0.74 22 E TR3E226(1)025(2)0200 5.5 6 0.200 0.91 33 D TR3D336(1)025(2)0400 8.3 6 0.400 0.61 33 D TR3D336(1)025(2)0300 8.3 6 0.300 0.71 33 D TR3D336(1)025(2)0225 8.3 6 0.225 0.82 33 D TR3D336(1)025(2)0200 8.3 6 0.200 0.87 33 E TR3E336(1)025(2)0300 8.3 6 0.300 0.74 33 E TR3E336(1)025(2)0200 8.3 6 0.200 0.91 33 E TR3E336(1)025(2)0175 6.6 4 0.175 0.97 47 D TR3D476(1)025(2)0350 11.8 8 0.350 0.65 47 D TR3D476(1)025(2)0250 11.8 8 0.250 0.77 47 D TR3D476(1)025(2)0200 11.8 8 0.200 0.87 47 D TR3D476(1)025(2)0150 11.8 8 0.150 1.00 47 D TR3D476(1)025(3)0125 11.8 8 0.125 1.10 47 D TR3D476(1)025(3)0100 11.8 8 0.100 1.22 47 E TR3E476(1)025(2)0300 11.8 6 0.300 0.74 47 E TR3E476(1)025(2)0200 11.8 6 0.200 0.91 47 E TR3E476(1)025(2)0150 11.8 8 0.150 1.05 47 E TR3E476(1)025(3)0125 11.8 8 0.125 1.15 47 E TR3E476(1)025(3)0100 11.8 8 0.100 1.28 68 E TR3E686(1)025(2)0250 17.0 8 0.250 0.81 68 E TR3E686(1)025(3)0125 17.0 8 0.125 1.15 100 W TR3W107(1)025(3)0200 25.0 15 0.200 1.12 100 W TR3W107(1)025(3)0150 25.0 15 0.150 1.29 100 W TR3W107(1)025(3)0100 25.0 15 0.100 1.58 Note • Part number definitions: (1) Capacitance tolerance codes: K, M (2) Terminations and packaging codes: C, D, E, F, V, U, T, W (3) Lead (Pb)-free terminations and packaging codes: C, D, V, U Revision: 28-Feb-2023 Document Number: 40080 15 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Upgrade for High Reliability With T83 TR3 www.vishay.com Vishay Sprague STANDARD RATINGS CAPACITANCE (μF) CASE CODE 0.22 0.33 0.47 0.47 0.68 0.68 1.0 1.0 1.0 1.0 1.5 1.5 1.5 1.5 2.2 2.2 2.2 2.2 2.2 3.3 3.3 3.3 3.3 3.3 4.7 4.7 4.7 4.7 4.7 4.7 4.7 6.8 6.8 6.8 6.8 6.8 6.8 10 10 10 10 10 10 10 10 10 10 10 15 A A A B A A A A A B B B C C B B B C C B B C C C B B B C C C D C C D D D E C C D D D D D D D E E C PART NUMBER MAX. DCL AT +25 °C (μA) 35 VDC AT +85 °C; 23 VDC AT +125 °C TR3A224(1)035(2)6000 0.5 TR3A334(1)035(2)6000 0.5 TR3A474(1)035(2)4000 0.5 TR3B474(1)035(2)4000 0.5 TR3A684(1)035(2)6000 0.5 TR3A684(1)035(2)4000 0.5 TR3A105(1)035(2)6000 0.5 TR3A105(1)035(2)4000 0.5 TR3A105(1)035(2)3000 0.5 TR3B105(1)035(2)2000 0.5 TR3B155(1)035(2)3000 0.5 TR3B155(1)035(2)2000 0.5 TR3C155(1)035(2)2500 0.5 TR3C155(1)035(2)0900 0.5 TR3B225(1)035(2)2500 0.8 TR3B225(1)035(2)2000 0.8 TR3B225(1)035(2)1500 0.8 TR3C225(1)035(2)1500 0.8 TR3C225(1)035(2)0900 0.8 TR3B335(1)035(2)1500 1.2 TR3B335(1)035(2)1000 1.2 TR3C335(1)035(2)0800 1.2 TR3C335(1)035(2)0700 1.2 TR3C335(1)035(2)0600 1.2 TR3B475(1)035(2)1500 1.6 TR3B475(1)035(2)1000 1.6 TR3B475(1)035(2)0700 1.6 TR3C475(1)035(2)0700 1.6 TR3C475(1)035(2)0600 1.6 TR3C475(1)035(2)0500 1.6 TR3D475(1)035(2)0700 1.6 TR3C685(1)035(2)0900 2.4 TR3C685(1)035(2)0475 2.4 TR3D685(1)035(2)0500 2.4 TR3D685(1)035(2)0400 2.4 TR3D685(1)035(2)0300 2.4 TR3E685(1)035(2)0300 2.4 TR3C106(1)035(2)1200 3.5 TR3C106(1)035(2)0450 3.5 TR3D106(1)035(2)0400 3.5 TR3D106(1)035(2)0300 3.5 TR3D106(1)035(2)0260 3.5 TR3D106(1)035(2)0250 3.5 TR3D106(1)035(2)0200 3.5 TR3D106(1)035(3)0135 3.5 TR3D106(1)035(3)0125 3.5 TR3E106(1)035(2)0250 3.5 TR3E106(1)035(2)0200 3.5 TR3C156(1)035(2)0600 5.3 MAX. DF AT +25 °C 120 Hz (%) MAX. ESR AT +25 °C 100 kHz (Ω) MAX. RIPPLE 100 kHz IRMS (A) 4 4 4 6 4 4 4 4 4 4 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 4 6 6 6 6 6 6 6 6 6 6 6 6 6.000 6.000 4.000 4.000 6.000 4.000 6.000 4.000 3.000 2.000 3.000 2.000 2.500 0.900 2.500 2.000 1.500 1.500 0.900 1.500 1.000 0.800 0.700 0.600 1.500 1.000 0.700 0.700 0.600 0.500 0.700 0.900 0.475 0.500 0.400 0.300 0.300 1.200 0.450 0.400 0.300 0.260 0.250 0.200 0.135 0.125 0.250 0.200 0.600 0.11 0.11 0.14 0.15 0.11 0.14 0.11 0.14 0.16 0.21 0.17 0.21 0.21 0.35 0.18 0.21 0.24 0.27 0.35 0.24 0.29 0.37 0.40 0.43 0.24 0.29 0.35 0.40 0.43 0.47 0.46 0.35 0.48 0.55 0.61 0.71 0.74 0.30 0.49 0.61 0.71 0.76 0.77 0.87 1.05 1.10 0.81 0.91 0.43 Note • Part number definitions: (1) Capacitance tolerance codes: K, M (2) Terminations and packaging codes: C, D, E, F, V, U, T, W (3) Lead (Pb)-free terminations and packaging codes: C, D, V, U Revision: 28-Feb-2023 Document Number: 40080 16 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Upgrade for High Reliability With T83 TR3 www.vishay.com Vishay Sprague STANDARD RATINGS CAPACITANCE (μF) CASE CODE 15 15 15 15 15 15 15 15 15 15 15 22 22 22 22 22 22 22 22 22 33 33 33 33 47 47 C D D D D D D E E E E D D D D D E E E E D D E E E E 0.15 0.22 0.33 0.47 0.47 1.0 1.0 1.0 1.5 1.5 2.2 2.2 2.2 3.3 3.3 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 A A A B C B B C B C B C D C D C C C D D D D E E PART NUMBER MAX. DCL AT +25 °C (μA) 35 VDC AT +85 °C; 23 VDC AT +125 °C TR3C156(1)035(2)0400 5.3 TR3D156(1)035(2)0350 5.3 TR3D156(1)035(2)0300 5.3 TR3D156(1)035(2)0260 5.3 TR3D156(1)035(2)0225 5.3 TR3D156(1)035(2)0200 5.3 TR3D156(1)035(2)0150 5.3 TR3E156(1)035(2)0300 5.3 TR3E156(1)035(2)0225 5.3 TR3E156(1)035(2)0200 5.3 TR3E156(1)035(2)0150 5.3 TR3D226(1)035(2)0400 7.7 TR3D226(1)035(2)0300 7.7 TR3D226(1)035(2)0275 7.7 TR3D226(1)035(2)0250 7.7 TR3D226(1)035(2)0200 7.7 TR3E226(1)035(2)0300 7.7 TR3E226(1)035(2)0275 7.7 TR3E226(1)035(2)0260 7.7 TR3E226(1)035(2)0200 7.7 TR3D336M035(2)0400 11.6 TR3D336M035(3)0250 11.6 TR3E336M035(2)0400 11.6 TR3E336M035(3)0250 11.6 TR3E476(1)035(2)0400 20.0 TR3E476(1)035(3)0200 20.0 50 VDC AT +85 °C; 33 VDC AT +125 °C TR3A154(1)050(2)10R0 0.5 TR3A224(1)050(2)10R0 0.5 TR3A334(1)050(2)7000 0.5 TR3B474(1)050(2)6000 0.5 TR3C474(1)050(2)2300 0.5 TR3B105(1)050(2)4000 0.5 TR3B105(1)050(2)2000 0.5 TR3C105(1)050(2)1600 0.5 TR3B155(1)050(2)2000 0.8 TR3C155(1)050(2)1500 0.8 TR3B225(1)050(2)2000 1.1 TR3C225(1)050(2)1500 1.1 TR3D225(1)050(2)0800 1.1 TR3C335(1)050(2)1500 1.7 TR3D335(1)050(2)0800 1.7 TR3C475(1)050(2)1000 2.4 TR3C475(1)050(2)0700 2.4 TR3C475(1)050(2)0500 2.4 TR3D475(1)050(2)0700 2.4 TR3D475(1)050(2)0600 2.4 TR3D475(1)050(2)0500 2.4 TR3D475(1)050(2)0300 2.4 TR3E475(1)050(2)0600 2.4 TR3E475(1)050(2)0300 2.4 MAX. DF AT +25 °C 120 Hz (%) MAX. ESR AT +25 °C 100 kHz (Ω) MAX. RIPPLE 100 kHz IRMS (A) 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 10 10 0.400 0.350 0.300 0.260 0.225 0.200 0.150 0.300 0.225 0.200 0.150 0.400 0.300 0.275 0.250 0.200 0.300 0.275 0.260 0.200 0.400 0.250 0.400 0.250 0.400 0.200 0.52 0.65 0.71 0.76 0.82 0.87 1.00 0.74 0.86 0.91 1.05 0.61 0.71 0.74 0.77 0.87 0.74 0.77 0.80 0.91 0.61 0.77 0.64 0.81 0.64 0.91 4 4 4 4 4 4 4 4 6 6 6 6 6 6 6 6 6 6 6 6 6 6 4 4 10.000 10.000 7.000 6.000 2.300 4.000 2.000 1.600 2.000 1.500 2.000 1.500 0.800 1.500 0.800 1.000 0.700 0.500 0.700 0.600 0.500 0.300 0.600 0.300 0.09 0.09 0.10 0.12 0.22 0.15 0.21 0.26 0.21 0.27 0.21 0.27 0.43 0.27 0.43 0.33 0.40 0.47 0.46 0.50 0.55 0.71 0.52 0.74 Note • Part number definitions: (1) Capacitance tolerance codes: K, M (2) Terminations and packaging codes: C, D, E, F, V, U, T, W (3) Lead (Pb)-free terminations and packaging codes: C, D, V, U Revision: 28-Feb-2023 Document Number: 40080 17 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000