Upgrade for High Reliability With T83
TR3
www.vishay.com
Vishay Sprague
Solid Tantalum Surface Mount Chip Capacitors
TANTAMOUNT™, Molded Case, Low ESR
FEATURES
LINKS TO ADDITIONAL RESOURCES
3D 3D
3D Models
Calculators
Related
Documents
Did You
Know?
Technical
Notes
• Low ESR
• Surge current tested: cases A and B - selected
Available
ratings; cases C, D, E, and W - all ratings
• Qualified to EIA-717
Available
• Molded case available in seven case codes
• High ripple current carrying capability
• Terminations: 100 % matte tin standard,
tin / lead available
Available
• Compatible with “high volume” automatic pick
and place equipment
• Compliant terminations
• Meets EIA-535-BAAC mechanical and performance
requirements
• Moisture sensitivity level 1
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Note
* This datasheet provides information about parts that are
RoHS-compliant and / or parts that are non RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information / tables in this datasheet for details
PERFORMANCE / ELECTRICAL
CHARACTERISTICS
www.vishay.com/doc?40192
Operating Temperature: -55 °C to +125 °C
(above 85 °C, voltage derating is required)
Capacitance Range: 0.47 μF to 1000 μF
Capacitance Tolerance: ± 10 %, ± 20 %
Voltage Rating: 4 VDC to 75 VDC
APPLICATIONS
Note
• For recommended voltage derating guidelines see “Typical
Performance Characteristics”
•
•
•
•
•
Industrial
Telecom infrastructure
Consumer
Computer
General purpose
ORDERING INFORMATION
TR3
TYPE
D
CASE CODE
107
CAPACITANCE
K
CAPACITANCE
TOLERANCE
010
DC VOLTAGE
RATING AT +85 °C
C
TERMINATION AND
PACKAGING
0100
ESR
See Ratings
and Case
Codes table
This is expressed
in picofarads.
The first two
digits are the
significant figures.
The third is the
number of zeros
to follow.
K = ± 10 %
M = ± 20 %
This is expressed
in V. To complete
the three-digit
block, zeros precede
the voltage rating.
A decimal point is
indicated by an “R”
(6R3 = 6.3 V).
Matte tin
C = 7" (178 mm) reel
D = 13" (330 mm) reel
V = 7" (178 mm) reel,
dry pack
U = 13" (330 mm) reel,
dry pack
Maximum 100 kHz
ESR in mΩ.
See note below.
Tin / lead
E = 7" (178 mm) reel
F = 13" (330 mm) reel
T = 7" (178 mm) reel,
dry pack
W = 13" (330 mm) reel,
dry pack
Notes
• We reserve the right to supply higher voltage ratings and tighter capacitance tolerance capacitors in the same case size.
Voltage substitutions will be marked with the higher voltage rating.
Low ESR solid tantalum chip capacitors allow delta ESR of 1.25 times the datasheet limit after mounting
• Dry pack as specified in J-STD-033
Revision: 28-Feb-2023
Document Number: 40080
1
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Upgrade for High Reliability With T83
TR3
www.vishay.com
Vishay Sprague
DIMENSIONS in inches [millimeters]
L
TW
W
TH
(MIN.)
H
Glue Pad
P
Glue Pad
CASE CODE
EIA SIZE
L
W
H
P
TW
TH (MIN.)
A
3216-18
0.126 ± 0.008
[3.2 ± 0.20]
0.063 ± 0.008
[1.6 ± 0.20]
0.063 ± 0.008
[1.6 ± 0.20]
0.031 ± 0.012
[0.80 ± 0.30]
0.047 ± 0.004
[1.2 ± 0.10]
0.028
[0.70]
B
3528-21
0.138 ± 0.008
[3.5 ± 0.20]
0.110 ± 0.008
[2.8 ± 0.20]
0.075 ± 0.008
[1.9 ± 0.20]
0.031 ± 0.012
[0.80 ± 0.30]
0.087 ± 0.004
[2.2 ± 0.10]
0.028
[0.70]
C
6032-28
0.236 ± 0.012
[6.0 ± 0.30]
0.126 ± 0.012
[3.2 ± 0.30]
0.098 ± 0.012
[2.5 ± 0.30]
0.051 ± 0.012
[1.3 ± 0.30]
0.087 ± 0.004
[2.2 ± 0.10]
0.039
[1.0]
D
7343-31
0.287 ± 0.012
[7.3 ± 0.30]
0.170 ± 0.012
[4.3 ± 0.30]
0.110 ± 0.012
[2.8 ± 0.30]
0.051 ± 0.012
[1.3 ± 0.30]
0.094 ± 0.004
[2.4 ± 0.10]
0.039
[1.0]
E
7343-43
0.287 ± 0.012
[7.3 ± 0.30]
0.169 ± 0.012
[4.3 ± 0.30]
0.157 ± 0.012
[4.0 ± 0.30]
0.051 ± 0.012
[1.3 ± 0.30]
0.094 ± 0.004
[2.4 ± 0.10]
0.039
[1.0]
W
7361-38
0.287 ± 0.012
[7.3 ± 0.30]
0.236 ± 0.012
[6.0 ± 0.30]
0.138 ± 0.012
[3.5 ± 0.30]
0.047 ± 0.008
[1.2 ± 0.20]
0.122 ± 0.004
[3.1 ± 0.10]
0.069
[1.75]
Note
• Glue pad (non-conductive, part of molded case) is dedicated for glue attachment (as user option)
RATINGS AND CASE CODES
μF
4V
6.3 V
10 V
16 V
20 V
25 V
35 V
0.15
50 V
63 V
75 V
A (10.0)
0.22
A (6.00)
A (10.0)
0.33
A (6.00)
A (7.00)
B (6.00),
C (2.30)
0.47
A (7.00)
A (4.00),
B (4.00)
0.68
A (6.00)
A (6.00, 4.00)
A (4.00)
A (6.00, 4.00, B (4.00, 2.00),
3.00),
C (1.60)
B (2.00)
1.0
A (6.20)
A (5.50, 3.00)
D (3.00,
1.50)
1.5
A (3.00)
A (4.00, 3.00), B (3.00, 2.00),
B (1.80)
C (2.50, 0.90)
B (2.00),
C (1.50)
B (2.00),
C (2.00),
D (2.00,
1.00)
2.2
B (2.50, 2.00,
A (4.00),
A (6.80, 6.00, A (4.00, 3.50, A (4.00, 3.00) B (1.70, 1.50,
1.50),
1.80)
1.80)
1.20, 0.90) C (1.50, 0.90)
B (2.00),
C (1.50),
D (0.80)
D (1.50)
A (3.50, 3.00), B (1.50, 1.00),
B (2.00, 1.50, C (0.80, 0.70,
0.75)
0.60)
C (1.50),
D (0.80)
D (1.00,
0.80)
D (1.20,
1.00, 0.80)
C (1.00, 0.70,
0.50),
D (0.70, 0.60,
0.50, 0.30),
E (0.60, 0.30)
D (0.70,
0.50)
E (1.50)
3.3
A (4.00, 3.50),
B (2.50)
A (2.10)
A (4.00),
B (1.30)
A (3.50, 3.00), B (1.50, 1.00,
B (1.50, 1.00,
0.70),
A (3.00, 1.50, A (3.00, 2.50,
A (3.50, 1.80),
1.40, 1.00), 2.00, 1.50), B (1.00, 0.75) 0.90, 0.70), C (0.70, 0.60,
C (0.60,
0.50),
B (1.40) B (1.50, 0.80)
0.525)
D (0.70)
4.7
6.8
A (1.80)
A (3.00, 1.80),A (3.00, 1.50),
B (1.30) B (1.20, 0.60)
A (3.20, 3.00, B (2.00, 1.50, C (0.90, 0.475), D (0.70, 0.60,
1.20, 0.70, D (0.50, 0.40,
0.50, 0.30),
2.60),
0.50, 0.40),
0.30),
E (0.55, 0.50)
B (1.00, 0.60)
C (0.60, 0.50)
E (0.30)
Note
• ESR limits in Ω are shown in parenthesis
Revision: 28-Feb-2023
Document Number: 40080
2
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Upgrade for High Reliability With T83
TR3
www.vishay.com
Vishay Sprague
RATINGS AND CASE CODES
μF
10
15
22
33
47
68
100
150
220
4V
6.3 V
10 V
16 V
20 V
25 V
B (1.30, 1.10,
A (2.00, 1.80, A (1.70), B (1.00, 0.50),
0.90, 0.45),
A (2.00, 1.50), 1.00, 0.90), B (0.80, 0.50), C (0.70, 0.50,
C (0.60, 0.50,
B (1.50) B (1.00, 0.80, C (0.60, 0.50, 0.475, 0.45,
0.45, 0.30),
0.40)
0.45)
0.75)
D (0.40, 0.30)
35 V
50 V
C (1.20, 0.45),
D (0.70, 0.55,
D (0.40, 0.30,
0.45),
0.26, 0.25,
E (0.70, 0.55,
0.20, 0.135,
0.50, 0.40,
0.125),
0.30)
E (0.25, 0.20)
63 V
75 V
E (0.60)
B (1.00, 0.80,
C (0.60, 0.40),
0.60),
D (0.35, 0.30,
C (0.90,
A (2.00, 1.00),
0.26, 0.225, E (0.40, 0.30,
B (0.80, 0.50),B (1.00, 0.50),
0.425),
A (1.50) A (2.00, 1.00) B (0.60, 0.45,
0.20, 0.150), 0.25, 0.20)
C (0.40)
C (0.40)
D (0.35,
0.70), C (0.70)
E (0.30, 0.225,
0.275, 0.25,
0.20, 0.150)
0.20)
B (0.80, 0.70, C (1.00, 0.90,
A (1.50, 1.00,
D (0.40, 0.30,
B (1.00, 0.70,
0.60, 0.40), 0.425, 0.40,
A (3.00, 2.00, 0.90, 0.80),
0.275, 0.250,
0.60, 0.40),
0.30, 0.275,
C (0.40,
1.00, 0.90), B (1.00, 0.70,
0.20),
C (0.375,
A (1.50)
0.250),
0.375),
0.50, 0.40),
B (0.60),
E (0.30, 0.275,
0.350),
D (0.30, D (0.30, 0.20),
C (0.40,
C (0.50)
0.260, 0.20)
D (0.25)
0.225, 0.20) E (0.30, 0.20)
0.345, 0.30)
B (0.140, B (0.70, 0.50,
A (2.00, 0.80, 0.65, 0.60,
C (0.35, 0.30, D (0.40, 0.30,
0.35),
0.50, 0.425,
A (1.50),
0.60),
0.225, 0.20), D (0.40, 0.25),
0.20),
C (0.30,
0.30),
B (0.50) B (0.45, 0.35,
D (0.40, 0.25, E (0.30, 0.20, E (0.40, 0.25)
0.225),
C (0.375,
0.60, 0.50)
0.175)
0.20)
D (0.25,
0.30)
0.225, 0.15)
B (0.65, 0.60,
D (0.35, 0.25,
0.50, 0.35), C (0.50, 0.35, D (0.20,
0.20, 0.15,
A (0.80),
0.175, 0.15,
0.30),
C (0.35, 0.30,
0.125, 0.10),
E
A (0.80, 0.50), B (0.55, 0.50,
0.10),
D (0.20, 0.15,
0.20),
E (0.30, 0.20, (0.40, 0.20) (1)
B (0.50)
0.35, 0.25),
E (0.15,
D (0.22, 0.20, 0.12, 0.10,
0.15, 0.125,
C (0.30, 0.25)
0.125)
0.14, 0.135, 0.080, 0.070)
0.10)
0.10)
B (1.50, 0.90,
B (0.65, 0.55,
0.75, 0.60),
D (0.20,
0.50, 0.35,
C (0.30,
0.175, 0.15,
0.25),
E (0.25,
0.275, 0.225 D (0.15, 0.10,
B (0.50),
0.115),
C (0.275,
0.070)
0.125)
0.20),
C (0.275)
E (0.20, 0.15,
0.25, 0.20),
D (0.20, 0.15,
0.125, 0.12)
D (0.20,
0.10, 0.07),
0.175)
E (0.15)
B (1.40),
D (0.20, 0.15,
B (1.50, 0.50, C (0.20, 0.15,
0.10, 0.085,
D (0.15,
0.10),
0.40, 0.25),
0.08),
0.125, 0.10,
A (1.00),
W (0.20, 0.15,
C (0.30, 0.25, D (0.15, 0.10,
E (0.20, 0.15,
0.075),
B (0.45),
0.10)
0.15, 0.125, 0.08, 0.07,
0.10),
E (0.15,
C (0.225)
0.065, 0.05),
0.10),
0.125, 0.10) W (0.20, 0.10,
D (0.15, 0.14) E (0.125,
0.08, 0.06)
0.15, 0.10)
D (0.40, 0.15,
0.125, 0.10,
C (0.30, 0.20),
C (0.50), 0.085, 0.075,
B (0.90, 0.50, D (0.15,
0.060),
D (0.15, 0.10,
W (0.20, 0.15,
0.125,
0.40),
0.075, 0.07, E (0.40, 0.15,
0.10, 0.08)
0.075, 0.07,
C (0.25),
0.10, 0.075,
0.05),
0.05),
D (0.15)
0.060),
E (0.10, 0.08)
E (0.10)
W (0.075,
0.060)
D (0.15,
B (1.10, 0.70, C (0.30, 0.25,
0.125, 0.10,
0.225),
0.50, 0.45),
0.05),
E (0.15,
C (0.20), D (0.15, 0.10,
E (0.15, 0.10, 0.125, 0.10)
0.05),
D (0.05, 0.15,
0.070, 0.060,
E (0.15, 0.10)
0.10)
0.050)
Notes
• ESR limits in Ω are shown in parenthesis
(1) 125 °C life test post test limits per AEC-Q200
Revision: 28-Feb-2023
Document Number: 40080
3
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Upgrade for High Reliability With T83
TR3
www.vishay.com
Vishay Sprague
RATINGS AND CASE CODES
μF
4V
6.3 V
10 V
D (0.15,
0.125, 0.10,
D (0.15,
0.06, 0.05,
0.125, 0.10),
D
(0.10,
0.45,
0.45,
0.35),
330
E (0.10, 0.06),
0.035, 0.15) E (0.15, 0.10,
W (0.10, 0.06,
0.05),
0.04)
W (0.10, 0.06,
0.04)
D (0.20, 0.15,
D (0.125, 0.125, 0.10), E (0.20, 0.15,
0.10, 0.06,
E (0.10,
470 0.045, 0.035) 0.065, 0.06, 0.10, 0.075),
W (0.10, 0.06,
E (0.10,
0.05),
0.05)
0.045, 0.035) W (0.10, 0.06,
0.05)
D (0.10, 0.06),
680 E (0.10, 0.04) E (0.10)
E (0.20, 0.15,
1000
E (0.10)
0.10),
W (0.05)
Note
• ESR limits in Ω are shown in parenthesis
16 V
20 V
25 V
35 V
50 V
63 V
75 V
MARKING
Indicates
lead (Pb)-free
Capacitance code, pF
Date code
designation
V 104L
Voltage
code
Polarity band (+)
A Case
“A” CASE VOLTAGE CODE
VOLTS
CODE
4.0
G
6.3
J
10
A
16
C
20
D
25
E
35
V
50
T
75
S
Voltage
Capacitance, μF
Polarity
band (+)
Indicates
lead (Pb)-free
22
10L
XX
2
Vishay marking
Date code
B, C, D, E, W Cases
Marking
Capacitor marking includes an anode (+) polarity band, capacitance in microfarads and the voltage rating. “A” case capacitors use a letter
code for the voltage and EIA capacitance code.
The Vishay identification marking is included if space permits. Vishay marking (“circled 2”) may show additives in the form of short lines,
depicting actual manufacturing facility. For A case capacitors discontinuation in polarity bar maybe used as actual manufacturing facility
designation. Capacitors rated at 6.3 V are marked 6 V.
A manufacturing date code is marked on all capacitors, for details see FAQ: www.vishay.com/doc?40110.
Capacitors may bear different marking scheme if parts are substituted with high performance Vishay Automotive Grade TP3 family or low
DCL TX3 family products. Marking examples are shown below.
Call the factory for further explanation.
ADDITIONAL MARKING EXAMPLES
TP3 MARKING
Capacitance
code, pF
Indicates
high performance (1)
Date code
designation
Capacitance
μF
Indicates
high performance (1)
Voltage
V 104Z
Voltage
Polarity band (+)
code
A Case
Polarity
band (+)
Date code
22
P10
XX
2
Vishay marking
B, C, D, E Cases
Note
Capital letter indicates lead (Pb)-free
(1)
Revision: 28-Feb-2023
Document Number: 40080
4
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Upgrade for High Reliability With T83
TR3
www.vishay.com
Vishay Sprague
ADDITIONAL MARKING EXAMPLES
TX3 MARKING
Indicates low DCL
Capacitance, µF product series (1) Rated voltage, V
22X16
Polarity
band (+)
YY
2 digits date code
2
Vishay marking
B, C Cases
Note
(1) Capital letter indicates lead (Pb)-free
STANDARD RATINGS
CAPACITANCE
(μF)
CASE
CODE
15
22
33
33
47
47
47
68
68
100
100
100
150
150
150
150
150
220
220
220
220
220
220
220
220
330
330
330
330
A
A
A
B
A
A
B
B
C
A
B
C
B
B
B
C
D
B
B
B
B
C
D
D
D
D
D
D
D
PART NUMBER
MAX. DCL
AT +25 °C
(μA)
4 VDC AT +85 °C; 2.7 VDC AT +125 °C
TR3A156(1)004(2)1500
0.6
TR3A226(1)004(2)1500
0.9
TR3A336(1)004(2)1500
1.3
TR3B336(1)004(2)0500
1.3
TR3A476(1)004(2)0800
1.9
TR3A476(1)004(2)0500
1.9
TR3B476(1)004(2)0500
1.9
TR3B686(1)004(2)0500
2.7
TR3C686(1)004(2)0275
2.7
TR3A107M004(2)1000
10.0
TR3B107(1)004(2)0450
4.0
TR3C107(1)004(2)0225
4.0
TR3B157(1)004(2)0900
6.0
TR3B157(1)004(2)0500
6.0
TR3B157(1)004(2)0400
6.0
TR3C157(1)004(2)0250
6.0
TR3D157(1)004(2)0150
6.0
TR3B227M004(2)1100
8.8
TR3B227M004(2)0700
8.8
TR3B227M004(2)0500
8.8
TR3B227M004(2)0450
8.8
TR3C227(1)004(2)0200
8.8
TR3D227(1)004(3)0050
8.8
TR3D227(1)004(2)0150
8.8
TR3D227(1)004(2)0100
8.8
TR3D337(1)004(2)0100
13.2
TR3D337(1)004(3)0045
13.2
TR3D337(1)004(3)0035
13.2
TR3D337(1)004(2)0150
13.2
MAX. DF
AT +25 °C
120 Hz
(%)
MAX. ESR
AT +25 °C
100 kHz
(Ω)
MAX. RIPPLE
100 kHz
IRMS
(A)
6
6
6
6
14
14
6
6
6
30
8
6
14
14
14
12
8
18
18
18
18
8
8
8
8
8
8
8
8
1.500
1.500
1.500
0.500
0.800
0.500
0.500
0.500
0.275
1.000
0.450
0.225
0.900
0.500
0.400
0.250
0.150
1.100
0.700
0.500
0.450
0.200
0.050
0.150
0.100
0.100
0.045
0.035
0.150
0.22
0.22
0.22
0.41
0.31
0.39
0.41
0.41
0.63
0.27
0.43
0.70
0.31
0.41
0.46
0.66
1.00
0.28
0.35
0.41
0.43
0.74
1.73
1.00
1.22
1.22
1.83
2.07
1.00
Note
• Part number definitions:
(1) Capacitance tolerance codes: K, M
(2) Terminations and packaging codes: C, D, E, F, V, U, T, W
(3) Lead (Pb)-free terminations and packaging codes: C, D, V, U
Revision: 28-Feb-2023
Document Number: 40080
5
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Upgrade for High Reliability With T83
TR3
www.vishay.com
Vishay Sprague
STANDARD RATINGS
CAPACITANCE
(μF)
CASE
CODE
PART NUMBER
470
470
470
470
470
470
470
470
680
680
680
680
1000
D
D
D
D
D
E
E
E
D
D
E
E
E
TR3D477(1)004(2)0125
TR3D477(1)004(2)0100
TR3D477(1)004(2)0060
TR3D477(1)004(3)0045
TR3D477(1)004(3)0035
TR3E477(1)004(2)0100
TR3E477(1)004(3)0045
TR3E477(1)004(3)0035
TR3D687M004(2)0100
TR3D687M004(3)0060
TR3E687(1)004(2)0100
TR3E687(1)004(3)0040
TR3E108M004(2)0100
3.3
6.8
10
10
10
15
15
22
22
22
22
22
22
33
33
33
33
33
33
33
47
47
47
47
47
47
47
68
68
68
A
A
A
A
B
A
A
A
A
A
A
B
C
A
A
A
B
B
B
B
A
B
B
B
B
C
C
B
B
B
TR3A335(1)6R3(2)2100
TR3A685(1)6R3(2)1800
TR3A106(1)6R3(2)2000
TR3A106(1)6R3(2)1500
TR3B106(1)6R3(2)1500
TR3A156(1)6R3(2)2000
TR3A156(1)6R3(2)1000
TR3A226(1)6R3(2)3000
TR3A226(1)6R3(2)2000
TR3A226(1)6R3(2)1000
TR3A226(1)6R3(2)0900
TR3B226(1)6R3(2)0600
TR3C226(1)6R3(2)0500
TR3A336(1)6R3(2)2000
TR3A336(1)6R3(2)0800
TR3A336(1)6R3(2)0600
TR3B336(1)6R3(2)0450
TR3B336(1)6R3(2)0350
TR3B336(1)6R3(2)0600
TR3B336(1)6R3(2)0500
TR3A476(1)6R3(2)0800
TR3B476(1)6R3(2)0550
TR3B476(1)6R3(2)0500
TR3B476(1)6R3(2)0350
TR3B476(1)6R3(2)0250
TR3C476(1)6R3(2)0300
TR3C476(1)6R3(2)0250
TR3B686(1)6R3(2)0650
TR3B686(1)6R3(2)0550
TR3B686(1)6R3(2)0500
MAX. DCL
AT +25 °C
(μA)
MAX. DF
AT +25 °C
120 Hz
(%)
MAX. ESR
AT +25 °C
100 kHz
(Ω)
MAX. RIPPLE
100 kHz
IRMS
(A)
10
10
10
10
10
10
10
10
25
25
12
12
20
0.125
0.100
0.060
0.045
0.035
0.100
0.045
0.035
0.100
0.060
0.100
0.040
0.100
1.10
1.22
1.58
1.83
2.07
1.28
1.91
2.17
1.22
1.58
1.28
1.37
1.28
6
6
6
6
6
6
6
6
6
6
6
6
6
14
14
14
6
6
6
6
12
6
6
6
6
6
6
6
6
6
2.100
1.800
2.000
1.500
1.500
2.000
1.000
3.000
2.000
1.000
0.900
0.600
0.500
2.000
0.800
0.600
0.450
0.350
0.600
0.500
0.800
0.550
0.500
0.350
0.250
0.300
0.250
0.650
0.550
0.500
0.19
0.20
0.19
0.22
0.24
0.19
0.27
0.16
0.19
0.27
0.29
0.38
0.47
0.19
0.31
0.35
0.43
0.49
0.38
0.41
0.31
0.39
0.41
0.49
0.58
0.61
0.66
0.36
0.39
0.41
4 VDC AT +85 °C; 2.7 VDC AT +125 °C
18.8
18.8
18.8
18.8
18.8
18.8
18.8
18.8
27.2
27.2
27.2
27.2
40.0
6.3 VDC AT +85 °C; 4 VDC AT +125 °C
0.5
0.5
0.6
0.6
0.6
0.9
0.9
1.4
1.4
1.4
1.4
1.4
1.3
2.0
2.0
2.0
2.0
2.0
2.0
2.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
4.3
4.3
4.3
Note
• Part number definitions:
(1) Capacitance tolerance codes: K, M
(2) Terminations and packaging codes: C, D, E, F, V, U, T, W
(3) Lead (Pb)-free terminations and packaging codes: C, D, V, U
Revision: 28-Feb-2023
Document Number: 40080
6
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Upgrade for High Reliability With T83
TR3
www.vishay.com
Vishay Sprague
STANDARD RATINGS
CAPACITANCE
(μF)
CASE
CODE
68
68
68
68
68
68
68
100
100
100
100
100
100
100
100
100
100
100
150
150
150
150
150
150
150
150
220
220
220
220
220
220
220
220
330
330
330
330
330
330
330
330
330
330
330
330
330
470
470
B
B
C
C
C
D
D
B
B
B
B
C
C
C
C
C
D
D
C
C
D
D
D
D
D
E
C
C
C
D
D
D
E
E
D
D
D
D
D
D
D
E
E
E
W
W
W
D
D
PART NUMBER
MAX. DCL
AT +25 °C
(μA)
6.3 VDC AT +85 °C; 4 VDC AT +125 °C
TR3B686(1)6R3(2)0350
4.3
TR3B686(1)6R3(2)0250
4.3
TR3C686(1)6R3(2)0275
4.3
TR3C686(1)6R3(2)0250
4.3
TR3C686(1)6R3(2)0200
4.3
TR3D686(1)6R3(2)0200
4.3
TR3D686(1)6R3(2)0175
4.3
TR3B107(1)6R3(2)1500
6.3
TR3B107(1)6R3(2)0500
6.3
TR3B107(1)6R3(2)0400
6.3
TR3B107(1)6R3(2)0250
6.3
TR3C107(1)6R3(2)0300
6.3
TR3C107(1)6R3(2)0250
6.3
TR3C107(1)6R3(2)0150
6.3
TR3C107(1)6R3(2)0125
6.3
TR3C107(1)6R3(2)0100
6.3
TR3D107(1)6R3(2)0150
6.3
TR3D107(1)6R3(2)0140
6.3
TR3C157(1)6R3(2)0300
9.4
TR3C157(1)6R3(2)0200
9.4
TR3D157(1)6R3(2)0150
9.4
TR3D157(1)6R3(2)0125
9.4
TR3D157(1)6R3(2)0075
9.4
TR3D157(1)6R3(2)0070
9.4
TR3D157(1)6R3(3)0050
9.4
TR3E157(1)6R3(2)0100
9.4
TR3C227(1)6R3(2)0300
13.9
TR3C227(1)6R3(2)0250
13.9
TR3C227(1)6R3(2)0225
13.9
TR3D227(1)6R3(2)0150
13.9
TR3D227(1)6R3(2)0100
13.9
TR3D227(1)6R3(3)0050
13.9
TR3E227(1)6R3(2)0150
13.9
TR3E227(1)6R3(2)0100
13.9
TR3D337(1)6R3(2)0150
20.8
TR3D337(1)6R3(2)0125
20.8
TR3D337(1)6R3(2)0100
20.8
TR3D337(1)6R3(2)0060
20.8
TR3D337(1)6R3(3)0050
20.8
TR3D337(1)6R3(3)0045
20.8
TR3D337(1)6R3(3)0035
20.8
TR3E337(1)6R3(3)0150
20.8
TR3E337(1)6R3(2)0100
20.8
TR3E337(1)6R3(2)0050
20.8
TR3W337(1)6R3(3)0100
20.8
TR3W337(1)6R3(3)0060
20.8
TR3W337(1)6R3(3)0040
20.8
TR3D477(1)6R3(2)0200
29.6
TR3D477(1)6R3(2)0150
29.6
MAX. DF
AT +25 °C
120 Hz
(%)
MAX. ESR
AT +25 °C
100 kHz
(Ω)
MAX. RIPPLE
100 kHz
IRMS
(A)
6
6
6
6
6
6
4
15
15
15
15
6
6
6
6
6
6
6
8
8
8
8
8
8
8
8
14
14
14
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
14
14
0.350
0.250
0.275
0.250
0.200
0.200
0.175
1.500
0.500
0.400
0.250
0.300
0.250
0.150
0.125
0.100
0.150
0.140
0.300
0.200
0.150
0.125
0.075
0.070
0.050
0.100
0.300
0.250
0.225
0.150
0.100
0.050
0.150
0.100
0.150
0.125
0.100
0.060
0.050
0.045
0.035
0.150
0.100
0.050
0.100
0.060
0.040
0.200
0.150
0.49
0.58
0.63
0.66
0.74
0.87
0.93
0.24
0.41
0.46
0.58
0.61
0.66
0.86
0.94
1.05
1.00
1.04
0.61
0.74
1.00
1.10
1.41
1.46
1.73
1.28
0.61
0.66
0.70
1.00
1.22
1.73
1.05
1.28
1.00
1.10
1.22
1.58
1.73
1.83
2.07
1.05
1.28
1.82
1.58
2.04
2.50
0.87
1.00
Note
• Part number definitions:
(1) Capacitance tolerance codes: K, M
(2) Terminations and packaging codes: C, D, E, F, V, U, T, W
(3) Lead (Pb)-free terminations and packaging codes: C, D, V, U
Revision: 28-Feb-2023
Document Number: 40080
7
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Upgrade for High Reliability With T83
TR3
www.vishay.com
Vishay Sprague
STANDARD RATINGS
CAPACITANCE
(μF)
CASE
CODE
470
470
470
470
470
470
470
470
470
680
1000
1000
1000
1000
D
D
E
E
E
E
W
W
W
E
E
E
E
W
2.2
2.2
2.2
4.7
4.7
4.7
4.7
4.7
6.8
6.8
6.8
10
10
10
10
10
10
10
15
15
15
15
15
15
22
22
22
22
22
22
22
22
A
A
A
A
A
A
A
B
A
A
B
A
A
A
A
B
B
B
A
A
B
B
B
C
A
A
A
A
B
B
B
B
PART NUMBER
MAX. DCL
AT +25 °C
(μA)
6.3 VDC AT +85 °C; 4 VDC AT +125 °C
TR3D477(1)6R3(2)0125
29.6
TR3D477(1)6R3(3)0100
29.6
TR3E477(1)6R3(2)0100
29.6
TR3E477(1)6R3(3)0065
29.6
TR3E477(1)6R3(3)0060
29.6
TR3E477(1)6R3(3)0050
29.6
TR3W477(1)6R3(3)0100
29.6
TR3W477(1)6R3(3)0060
29.6
TR3W477(1)6R3(3)0050
29.6
TR3E687(1)6R3(2)0100
42.8
TR3E108M6R3(2)0200
63.0
TR3E108M6R3(2)0150
63.0
TR3E108M6R3(3)0100
63.0
TR3W108(1)6R3(3)0050
60.0
10 VDC AT +85 °C; 7 VDC AT +125 °C
TR3A225(1)010(2)6800
0.5
TR3A225(1)010(2)6000
0.5
TR3A225(1)010(2)1800
0.5
TR3A475(1)010(2)3000
0.5
TR3A475(1)010(2)1500
0.5
TR3A475(1)010(2)1400
0.5
TR3A475(1)010(2)1000
0.5
TR3B475(1)010(2)1400
0.5
TR3A685(1)010(2)3000
0.7
TR3A685(1)010(2)1800
0.7
TR3B685(1)010(2)1300
0.7
TR3A106(1)010(2)2000
1.0
TR3A106(1)010(2)1800
1.0
TR3A106(1)010(2)1000
1.0
TR3A106(1)010(2)0900
1.0
TR3B106(1)010(2)1000
1.0
TR3B106(1)010(2)0800
1.0
TR3B106(1)010(2)0750
1.0
TR3A156(1)010(2)2000
1.5
TR3A156(1)010(2)1000
1.5
TR3B156(1)010(2)0600
1.5
TR3B156(1)010(2)0450
1.5
TR3B156(1)010(2)0700
1.5
TR3C156(1)010(2)0700
1.5
TR3A226(1)010(2)1500
2.2
TR3A226(1)010(2)1000
2.2
TR3A226(1)010(2)0900
2.2
TR3A226(1)010(2)0800
2.2
TR3B226(1)010(2)1000
2.2
TR3B226(1)010(2)0700
2.2
TR3B226(1)010(2)0500
2.2
TR3B226(1)010(2)0400
2.2
MAX. DF
AT +25 °C
120 Hz
(%)
MAX. ESR
AT +25 °C
100 kHz
(Ω)
MAX. RIPPLE
100 kHz
IRMS
(A)
14
14
10
10
10
10
20
20
20
20
30
30
30
16
0.125
0.100
0.100
0.065
0.060
0.050
0.100
0.060
0.050
0.100
0.200
0.150
0.100
0.050
1.10
1.22
1.28
1.59
1.66
1.82
1.58
2.04
2.24
1.28
0.91
1.05
1.28
2.24
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
8
8
8
8
6
6
6
6
6.800
6.000
1.800
3.000
1.500
1.400
1.000
1.400
3.000
1.800
1.300
2.000
1.800
1.000
0.900
1.000
0.800
0.750
2.000
1.000
0.600
0.450
0.700
0.700
1.500
1.000
0.900
0.800
1.000
0.700
0.500
0.400
0.11
0.11
0.20
0.16
0.22
0.23
0.27
0.25
0.16
0.20
0.26
0.19
0.20
0.27
0.29
0.29
0.33
0.34
0.19
0.27
0.38
0.43
0.35
0.40
0.22
0.27
0.29
0.31
0.29
0.35
0.41
0.46
Note
• Part number definitions:
(1) Capacitance tolerance codes: K, M
(2) Terminations and packaging codes: C, D, E, F, V, U, T, W
(3) Lead (Pb)-free terminations and packaging codes: C, D, V, U
Revision: 28-Feb-2023
Document Number: 40080
8
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Upgrade for High Reliability With T83
TR3
www.vishay.com
Vishay Sprague
STANDARD RATINGS
MAX. DF
AT +25 °C
120 Hz
(%)
MAX. ESR
AT +25 °C
100 kHz
(Ω)
MAX. RIPPLE
100 kHz
IRMS
(A)
2.2
6
0.400
0.52
2.2
6
0.345
0.56
TR3C226(1)010(2)0300
2.2
6
0.300
0.61
B
TR3B336(1)010(2)1400
3.3
6
1.400
0.25
33
B
TR3B336(1)010(2)0650
3.3
6
0.650
0.36
33
B
TR3B336(1)010(2)0600
3.3
6
0.600
0.38
CAPACITANCE
(μF)
CASE
CODE
PART NUMBER
22
C
TR3C226(1)010(2)0400
22
C
TR3C226(1)010(2)0345
22
C
33
MAX. DCL
AT +25 °C
(μA)
10 VDC AT +85 °C; 7 VDC AT +125 °C
33
B
TR3B336(1)010(2)0500
3.3
6
0.500
0.41
33
B
TR3B336(1)010(2)0425
3.3
6
0.425
0.45
33
B
TR3B336(1)010(2)0300
3.3
6
0.300
0.53
33
C
TR3C336(1)010(2)0375
3.3
6
0.375
0.54
33
C
TR3C336(1)010(2)0300
3.3
6
0.300
0.61
47
B
TR3B476(1)010(2)0650
4.7
6
0.650
0.36
47
B
TR3B476(1)010(2)0600
4.7
6
0.600
0.38
47
B
TR3B476(1)010(2)0500
4.7
6
0.500
0.41
47
B
TR3B476(1)010(2)0350
4.7
6
0.350
0.49
47
C
TR3C476(1)010(2)0350
4.7
6
0.350
0.56
47
C
TR3C476(1)010(2)0300
4.7
6
0.300
0.61
47
C
TR3C476(1)010(2)0200
4.7
6
0.200
0.74
47
D
TR3D476(1)010(2)0220
4.7
6
0.220
0.83
47
D
TR3D476(1)010(2)0200
4.7
6
0.200
0.87
47
D
TR3D476(1)010(2)0140
4.7
6
0.140
1.04
47
D
TR3D476(1)010(2)0135
4.7
6
0.135
1.05
47
D
TR3D476(1)010(2)0100
4.7
6
0.100
1.22
68
B
TR3B686(1)010(2)1500
6.8
14
1.500
0.24
68
B
TR3B686(1)010(2)0900
6.8
14
0.900
0.31
68
B
TR3B686(1)010(2)0750
6.8
14
0.750
0.34
68
B
TR3B686(1)010(2)0600
6.8
14
0.600
0.38
68
C
TR3C686(1)010(2)0300
6.8
6
0.300
0.61
68
C
TR3C686(1)010(2)0275
6.8
6
0.275
0.63
68
C
TR3C686(1)010(2)0225
6.8
6
0.225
0.70
68
C
TR3C686(1)010(2)0200
6.8
6
0.200
0.74
68
D
TR3D686(1)010(2)0200
6.8
6
0.200
0.87
68
D
TR3D686(1)010(2)0150
6.8
6
0.150
1.00
68
D
TR3D686(1)010(2)0100
6.8
6
0.100
1.22
68
D
TR3D686(1)010(3)0070
6.8
6
0.070
1.46
68
E
TR3E686(1)010(2)0150
6.8
4
0.150
1.05
100
B
TR3B107M010(2)1400
10.0
25
1.400
0.25
100
C
TR3C107(1)010(2)0200
10.0
8
0.200
0.74
100
C
TR3C107(1)010(2)0150
10.0
8
0.150
0.86
100
C
TR3C107(1)010(2)0100
10.0
8
0.100
1.05
100
D
TR3D107(1)010(2)0150
10.0
6
0.150
1.00
100
D
TR3D107(1)010(2)0100
10.0
6
0.100
1.22
100
D
TR3D107(1)010(2)0080
10.0
6
0.080
1.37
Note
• Part number definitions:
(1) Capacitance tolerance codes: K, M
(2) Terminations and packaging codes: C, D, E, F, V, U, T, W
(3) Lead (Pb)-free terminations and packaging codes: C, D, V, U
Revision: 28-Feb-2023
Document Number: 40080
9
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Upgrade for High Reliability With T83
TR3
www.vishay.com
Vishay Sprague
STANDARD RATINGS
MAX. DF
AT +25 °C
120 Hz
(%)
MAX. ESR
AT +25 °C
100 kHz
(Ω)
MAX. RIPPLE
100 kHz
IRMS
(A)
10.0
6
0.070
1.52
TR3D107(1)010(3)0065
10.0
6
0.065
1.46
TR3D107(1)010(3)0050
10.0
6
0.050
1.73
CAPACITANCE
(μF)
CASE
CODE
PART NUMBER
100
D
TR3D107(1)010(3)0070
100
D
100
D
MAX. DCL
AT +25 °C
(μA)
10 VDC AT +85 °C; 7 VDC AT +125 °C
100
E
TR3E107(1)010(2)0125
10.0
6
0.125
1.15
100
E
TR3E107(1)010(2)0150
10.0
6
0.150
1.05
100
E
TR3E107(1)010(2)0100
10.0
6
0.100
1.28
150
C
TR3C157(1)010(2)0500
15.0
20
0.500
0.47
150
D
TR3D157(1)010(2)0150
15.0
8
0.150
1.00
150
D
TR3D157(1)010(2)0100
15.0
8
0.100
1.22
150
D
TR3D157(1)010(2)0075
15.0
8
0.075
1.41
150
D
TR3D157(1)010(3)0070
15.0
8
0.070
1.46
150
D
TR3D157(1)010(3)0050
15.0
8
0.050
1.73
150
E
TR3E157(1)010(2)0100
15.0
8
0.100
1.28
150
E
TR3E157(1)010(2)0080
15.0
8
0.080
1.44
220
D
TR3D227(1)010(2)0150
22.0
8
0.150
1.00
220
D
TR3D227(1)010(2)0125
22.0
8
0.125
1.10
220
D
TR3D227(1)010(2)0100
22.0
8
0.100
1.22
220
D
TR3D227(1)010(3)0050
22.0
8
0.050
1.73
220
E
TR3E227(1)010(2)0150
22.0
8
0.150
1.05
220
E
TR3E227(1)010(2)0100
22.0
8
0.100
1.28
220
E
TR3E227(1)010(3)0070
22.0
8
0.070
1.54
220
E
TR3E227(1)010(3)0060
22.0
8
0.060
1.66
220
E
TR3E227(1)010(3)0050
22.0
8
0.050
1.82
330
D
TR3D337(1)010(2)0150
33.0
15
0.150
1.00
330
D
TR3D337(1)010(2)0125
33.0
15
0.125
1.10
330
D
TR3D337(1)010(2)0100
33.0
15
0.100
1.22
330
E
TR3E337(1)010(2)0100
33.0
10
0.100
1.28
330
E
TR3E337(1)010(3)0060
33.0
10
0.060
1.66
330
W
TR3W337(1)010(3)0100
33.0
10
0.100
1.58
330
W
TR3W337(1)010(3)0060
33.0
10
0.060
2.04
330
W
TR3W337(1)010(3)0040
33.0
10
0.040
2.50
470
E
TR3E477(1)010(2)0200
47.0
15
0.200
0.91
470
E
TR3E477(1)010(2)0150
47.0
15
0.150
1.05
470
E
TR3E477(1)010(2)0100
47.0
15
0.100
1.28
470
E
TR3E477(1)010(3)0075
47.0
15
0.075
1.48
470
W
TR3W477(1)010(3)0100
47.0
20
0.100
1.58
470
W
TR3W477(1)010(3)0060
47.0
20
0.060
2.04
470
W
TR3W477(1)010(3)0050
47.0
20
0.050
2.24
Note
• Part number definitions:
(1) Capacitance tolerance codes: K, M
(2) Terminations and packaging codes: C, D, E, F, V, U, T, W
(3) Lead (Pb)-free terminations and packaging codes: C, D, V, U
Revision: 28-Feb-2023
Document Number: 40080
10
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000