Upgrade for High Reliability With T83
TR3
www.vishay.com
Vishay Sprague
Solid Tantalum Surface Mount Chip Capacitors
TANTAMOUNT™, Molded Case, Low ESR
FEATURES
LINKS TO ADDITIONAL RESOURCES
3D 3D
3D Models
Calculators
Related
Documents
Did You
Know?
Technical
Notes
• Low ESR
• Surge current tested: cases A and B - selected
Available
ratings; cases C, D, E, and W - all ratings
• Qualified to EIA-717
Available
• Molded case available in seven case codes
• High ripple current carrying capability
• Terminations: 100 % matte tin standard,
tin / lead available
Available
• Compatible with “high volume” automatic pick
and place equipment
• Compliant terminations
• Meets EIA-535-BAAC mechanical and performance
requirements
• Moisture sensitivity level 1
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Note
* This datasheet provides information about parts that are
RoHS-compliant and / or parts that are non RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information / tables in this datasheet for details
PERFORMANCE / ELECTRICAL
CHARACTERISTICS
www.vishay.com/doc?40192
Operating Temperature: -55 °C to +125 °C
(above 85 °C, voltage derating is required)
Capacitance Range: 0.47 μF to 1000 μF
Capacitance Tolerance: ± 10 %, ± 20 %
Voltage Rating: 4 VDC to 75 VDC
APPLICATIONS
Note
• For recommended voltage derating guidelines see “Typical
Performance Characteristics”
•
•
•
•
•
Industrial
Telecom infrastructure
Consumer
Computer
General purpose
ORDERING INFORMATION
TR3
TYPE
D
CASE CODE
107
CAPACITANCE
K
CAPACITANCE
TOLERANCE
010
DC VOLTAGE
RATING AT +85 °C
C
TERMINATION AND
PACKAGING
0100
ESR
See Ratings
and Case
Codes table
This is expressed
in picofarads.
The first two
digits are the
significant figures.
The third is the
number of zeros
to follow.
K = ± 10 %
M = ± 20 %
This is expressed
in V. To complete
the three-digit
block, zeros precede
the voltage rating.
A decimal point is
indicated by an “R”
(6R3 = 6.3 V).
Matte tin
C = 7" (178 mm) reel
D = 13" (330 mm) reel
V = 7" (178 mm) reel,
dry pack
U = 13" (330 mm) reel,
dry pack
Maximum 100 kHz
ESR in mΩ.
See note below.
Tin / lead
E = 7" (178 mm) reel
F = 13" (330 mm) reel
T = 7" (178 mm) reel,
dry pack
W = 13" (330 mm) reel,
dry pack
Notes
• We reserve the right to supply higher voltage ratings and tighter capacitance tolerance capacitors in the same case size.
Voltage substitutions will be marked with the higher voltage rating.
Low ESR solid tantalum chip capacitors allow delta ESR of 1.25 times the datasheet limit after mounting
• Dry pack as specified in J-STD-033
Revision: 28-Feb-2023
Document Number: 40080
1
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Upgrade for High Reliability With T83
TR3
www.vishay.com
Vishay Sprague
DIMENSIONS in inches [millimeters]
L
TW
W
TH
(MIN.)
H
Glue Pad
P
Glue Pad
CASE CODE
EIA SIZE
L
W
H
P
TW
TH (MIN.)
A
3216-18
0.126 ± 0.008
[3.2 ± 0.20]
0.063 ± 0.008
[1.6 ± 0.20]
0.063 ± 0.008
[1.6 ± 0.20]
0.031 ± 0.012
[0.80 ± 0.30]
0.047 ± 0.004
[1.2 ± 0.10]
0.028
[0.70]
B
3528-21
0.138 ± 0.008
[3.5 ± 0.20]
0.110 ± 0.008
[2.8 ± 0.20]
0.075 ± 0.008
[1.9 ± 0.20]
0.031 ± 0.012
[0.80 ± 0.30]
0.087 ± 0.004
[2.2 ± 0.10]
0.028
[0.70]
C
6032-28
0.236 ± 0.012
[6.0 ± 0.30]
0.126 ± 0.012
[3.2 ± 0.30]
0.098 ± 0.012
[2.5 ± 0.30]
0.051 ± 0.012
[1.3 ± 0.30]
0.087 ± 0.004
[2.2 ± 0.10]
0.039
[1.0]
D
7343-31
0.287 ± 0.012
[7.3 ± 0.30]
0.170 ± 0.012
[4.3 ± 0.30]
0.110 ± 0.012
[2.8 ± 0.30]
0.051 ± 0.012
[1.3 ± 0.30]
0.094 ± 0.004
[2.4 ± 0.10]
0.039
[1.0]
E
7343-43
0.287 ± 0.012
[7.3 ± 0.30]
0.169 ± 0.012
[4.3 ± 0.30]
0.157 ± 0.012
[4.0 ± 0.30]
0.051 ± 0.012
[1.3 ± 0.30]
0.094 ± 0.004
[2.4 ± 0.10]
0.039
[1.0]
W
7361-38
0.287 ± 0.012
[7.3 ± 0.30]
0.236 ± 0.012
[6.0 ± 0.30]
0.138 ± 0.012
[3.5 ± 0.30]
0.047 ± 0.008
[1.2 ± 0.20]
0.122 ± 0.004
[3.1 ± 0.10]
0.069
[1.75]
Note
• Glue pad (non-conductive, part of molded case) is dedicated for glue attachment (as user option)
RATINGS AND CASE CODES
μF
4V
6.3 V
10 V
16 V
20 V
25 V
35 V
0.15
50 V
63 V
75 V
A (10.0)
0.22
A (6.00)
A (10.0)
0.33
A (6.00)
A (7.00)
B (6.00),
C (2.30)
0.47
A (7.00)
A (4.00),
B (4.00)
0.68
A (6.00)
A (6.00, 4.00)
A (4.00)
A (6.00, 4.00, B (4.00, 2.00),
3.00),
C (1.60)
B (2.00)
1.0
A (6.20)
A (5.50, 3.00)
D (3.00,
1.50)
1.5
A (3.00)
A (4.00, 3.00), B (3.00, 2.00),
B (1.80)
C (2.50, 0.90)
B (2.00),
C (1.50)
B (2.00),
C (2.00),
D (2.00,
1.00)
2.2
B (2.50, 2.00,
A (4.00),
A (6.80, 6.00, A (4.00, 3.50, A (4.00, 3.00) B (1.70, 1.50,
1.50),
1.80)
1.80)
1.20, 0.90) C (1.50, 0.90)
B (2.00),
C (1.50),
D (0.80)
D (1.50)
A (3.50, 3.00), B (1.50, 1.00),
B (2.00, 1.50, C (0.80, 0.70,
0.75)
0.60)
C (1.50),
D (0.80)
D (1.00,
0.80)
D (1.20,
1.00, 0.80)
C (1.00, 0.70,
0.50),
D (0.70, 0.60,
0.50, 0.30),
E (0.60, 0.30)
D (0.70,
0.50)
E (1.50)
3.3
A (4.00, 3.50),
B (2.50)
A (2.10)
A (4.00),
B (1.30)
A (3.50, 3.00), B (1.50, 1.00,
B (1.50, 1.00,
0.70),
A (3.00, 1.50, A (3.00, 2.50,
A (3.50, 1.80),
1.40, 1.00), 2.00, 1.50), B (1.00, 0.75) 0.90, 0.70), C (0.70, 0.60,
C (0.60,
0.50),
B (1.40) B (1.50, 0.80)
0.525)
D (0.70)
4.7
6.8
A (1.80)
A (3.00, 1.80),A (3.00, 1.50),
B (1.30) B (1.20, 0.60)
A (3.20, 3.00, B (2.00, 1.50, C (0.90, 0.475), D (0.70, 0.60,
1.20, 0.70, D (0.50, 0.40,
0.50, 0.30),
2.60),
0.50, 0.40),
0.30),
E (0.55, 0.50)
B (1.00, 0.60)
C (0.60, 0.50)
E (0.30)
Note
• ESR limits in Ω are shown in parenthesis
Revision: 28-Feb-2023
Document Number: 40080
2
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Upgrade for High Reliability With T83
TR3
www.vishay.com
Vishay Sprague
RATINGS AND CASE CODES
μF
10
15
22
33
47
68
100
150
220
4V
6.3 V
10 V
16 V
20 V
25 V
B (1.30, 1.10,
A (2.00, 1.80, A (1.70), B (1.00, 0.50),
0.90, 0.45),
A (2.00, 1.50), 1.00, 0.90), B (0.80, 0.50), C (0.70, 0.50,
C (0.60, 0.50,
B (1.50) B (1.00, 0.80, C (0.60, 0.50, 0.475, 0.45,
0.45, 0.30),
0.40)
0.45)
0.75)
D (0.40, 0.30)
35 V
50 V
C (1.20, 0.45),
D (0.70, 0.55,
D (0.40, 0.30,
0.45),
0.26, 0.25,
E (0.70, 0.55,
0.20, 0.135,
0.50, 0.40,
0.125),
0.30)
E (0.25, 0.20)
63 V
75 V
E (0.60)
B (1.00, 0.80,
C (0.60, 0.40),
0.60),
D (0.35, 0.30,
C (0.90,
A (2.00, 1.00),
0.26, 0.225, E (0.40, 0.30,
B (0.80, 0.50),B (1.00, 0.50),
0.425),
A (1.50) A (2.00, 1.00) B (0.60, 0.45,
0.20, 0.150), 0.25, 0.20)
C (0.40)
C (0.40)
D (0.35,
0.70), C (0.70)
E (0.30, 0.225,
0.275, 0.25,
0.20, 0.150)
0.20)
B (0.80, 0.70, C (1.00, 0.90,
A (1.50, 1.00,
D (0.40, 0.30,
B (1.00, 0.70,
0.60, 0.40), 0.425, 0.40,
A (3.00, 2.00, 0.90, 0.80),
0.275, 0.250,
0.60, 0.40),
0.30, 0.275,
C (0.40,
1.00, 0.90), B (1.00, 0.70,
0.20),
C (0.375,
A (1.50)
0.250),
0.375),
0.50, 0.40),
B (0.60),
E (0.30, 0.275,
0.350),
D (0.30, D (0.30, 0.20),
C (0.40,
C (0.50)
0.260, 0.20)
D (0.25)
0.225, 0.20) E (0.30, 0.20)
0.345, 0.30)
B (0.140, B (0.70, 0.50,
A (2.00, 0.80, 0.65, 0.60,
C (0.35, 0.30, D (0.40, 0.30,
0.35),
0.50, 0.425,
A (1.50),
0.60),
0.225, 0.20), D (0.40, 0.25),
0.20),
C (0.30,
0.30),
B (0.50) B (0.45, 0.35,
D (0.40, 0.25, E (0.30, 0.20, E (0.40, 0.25)
0.225),
C (0.375,
0.60, 0.50)
0.175)
0.20)
D (0.25,
0.30)
0.225, 0.15)
B (0.65, 0.60,
D (0.35, 0.25,
0.50, 0.35), C (0.50, 0.35, D (0.20,
0.20, 0.15,
A (0.80),
0.175, 0.15,
0.30),
C (0.35, 0.30,
0.125, 0.10),
E
A (0.80, 0.50), B (0.55, 0.50,
0.10),
D (0.20, 0.15,
0.20),
E (0.30, 0.20, (0.40, 0.20) (1)
B (0.50)
0.35, 0.25),
E (0.15,
D (0.22, 0.20, 0.12, 0.10,
0.15, 0.125,
C (0.30, 0.25)
0.125)
0.14, 0.135, 0.080, 0.070)
0.10)
0.10)
B (1.50, 0.90,
B (0.65, 0.55,
0.75, 0.60),
D (0.20,
0.50, 0.35,
C (0.30,
0.175, 0.15,
0.25),
E (0.25,
0.275, 0.225 D (0.15, 0.10,
B (0.50),
0.115),
C (0.275,
0.070)
0.125)
0.20),
C (0.275)
E (0.20, 0.15,
0.25, 0.20),
D (0.20, 0.15,
0.125, 0.12)
D (0.20,
0.10, 0.07),
0.175)
E (0.15)
B (1.40),
D (0.20, 0.15,
B (1.50, 0.50, C (0.20, 0.15,
0.10, 0.085,
D (0.15,
0.10),
0.40, 0.25),
0.08),
0.125, 0.10,
A (1.00),
W (0.20, 0.15,
C (0.30, 0.25, D (0.15, 0.10,
E (0.20, 0.15,
0.075),
B (0.45),
0.10)
0.15, 0.125, 0.08, 0.07,
0.10),
E (0.15,
C (0.225)
0.065, 0.05),
0.10),
0.125, 0.10) W (0.20, 0.10,
D (0.15, 0.14) E (0.125,
0.08, 0.06)
0.15, 0.10)
D (0.40, 0.15,
0.125, 0.10,
C (0.30, 0.20),
C (0.50), 0.085, 0.075,
B (0.90, 0.50, D (0.15,
0.060),
D (0.15, 0.10,
W (0.20, 0.15,
0.125,
0.40),
0.075, 0.07, E (0.40, 0.15,
0.10, 0.08)
0.075, 0.07,
C (0.25),
0.10, 0.075,
0.05),
0.05),
D (0.15)
0.060),
E (0.10, 0.08)
E (0.10)
W (0.075,
0.060)
D (0.15,
B (1.10, 0.70, C (0.30, 0.25,
0.125, 0.10,
0.225),
0.50, 0.45),
0.05),
E (0.15,
C (0.20), D (0.15, 0.10,
E (0.15, 0.10, 0.125, 0.10)
0.05),
D (0.05, 0.15,
0.070, 0.060,
E (0.15, 0.10)
0.10)
0.050)
Notes
• ESR limits in Ω are shown in parenthesis
(1) 125 °C life test post test limits per AEC-Q200
Revision: 28-Feb-2023
Document Number: 40080
3
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Upgrade for High Reliability With T83
TR3
www.vishay.com
Vishay Sprague
RATINGS AND CASE CODES
μF
4V
6.3 V
10 V
D (0.15,
0.125, 0.10,
D (0.15,
0.06, 0.05,
0.125, 0.10),
D
(0.10,
0.45,
0.45,
0.35),
330
E (0.10, 0.06),
0.035, 0.15) E (0.15, 0.10,
W (0.10, 0.06,
0.05),
0.04)
W (0.10, 0.06,
0.04)
D (0.20, 0.15,
D (0.125, 0.125, 0.10), E (0.20, 0.15,
0.10, 0.06,
E (0.10,
470 0.045, 0.035) 0.065, 0.06, 0.10, 0.075),
W (0.10, 0.06,
E (0.10,
0.05),
0.05)
0.045, 0.035) W (0.10, 0.06,
0.05)
D (0.10, 0.06),
680 E (0.10, 0.04) E (0.10)
E (0.20, 0.15,
1000
E (0.10)
0.10),
W (0.05)
Note
• ESR limits in Ω are shown in parenthesis
16 V
20 V
25 V
35 V
50 V
63 V
75 V
MARKING
Indicates
lead (Pb)-free
Capacitance code, pF
Date code
designation
V 104L
Voltage
code
Polarity band (+)
A Case
“A” CASE VOLTAGE CODE
VOLTS
CODE
4.0
G
6.3
J
10
A
16
C
20
D
25
E
35
V
50
T
75
S
Voltage
Capacitance, μF
Polarity
band (+)
Date code
Indicates
lead (Pb)-free
22
10L
XX
2
Vishay marking
B, C, D, E, W Cases
Marking
Capacitor marking includes an anode (+) polarity band, capacitance in microfarads and the voltage rating. “A” case capacitors use a letter
code for the voltage and EIA capacitance code.
The Vishay identification marking is included if space permits. Vishay marking (“circled 2”) may show additives in the form of short lines,
depicting actual manufacturing facility. For A case capacitors discontinuation in polarity bar maybe used as actual manufacturing facility
designation. Capacitors rated at 6.3 V are marked 6 V.
A manufacturing date code is marked on all capacitors, for details see FAQ: www.vishay.com/doc?40110.
Capacitors may bear different marking scheme if parts are substituted with high performance Vishay Automotive Grade TP3 family or low
DCL TX3 family products. Marking examples are shown below.
Call the factory for further explanation.
ADDITIONAL MARKING EXAMPLES
TP3 MARKING
Capacitance
code, pF
Note
Capital letter indicates lead (Pb)-free
(1)
Revision: 28-Feb-2023
Document Number: 40080
4
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000