End of Life May-2023 - Alternative Device: TSMP98000
TSMP58000
www.vishay.com
Vishay Semiconductors
IR Sensor Module for Remote Control Systems
FEATURES
• Photo detector and preamplifier in one package
• AC coupled response from 20 kHz to 60 kHz, all
data formats
• Improved shielding
disturbance
against
electrical
field
• TTL and CMOS compatibility
• Output active low
• Supply voltage 2.5 V to 5.5 V, typically the device
works in the range between 2.0 V and 5.5 V
19026
• Carrier out signal for code learning functions
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
LINKS TO ADDITIONAL RESOURCES
3D 3D
Product Page
3D Models
Holders
Bends and Cuts
Calculators
Marking
Packages
MECHANICAL DATA
Pinning:
1 = carrier OUT, 2 = GND, 3 = VS
DESCRIPTION
ORDERING CODE
The TSMP58000 is a miniaturized sensor for receiving the
modulated signal of infrared remote control systems. A PIN
diode and preamplifier are assembled on a lead frame, the
epoxy package is designed as an IR filter. The modulated
output signal, carrier out, can be used for code learning
applications.
TSMP58000 - 1500 pieces in bags
BLOCK DIAGRAM
3 VS
This component has not been qualified according to
automotive specifications.
1 Carrier out
TIA
Amp
Signal shaping
2 GND
19746
APPLICATION CIRCUIT
V
Circuit
S
Transmitter TSMPxxxx
with
C1 =
TSALxxxx
4.7 µF
OUT
GND
R1 = 100 Ω
R2 =
4.7 kΩ
+ VS
µC
VO
GND
R1 + C1 recommended to suppress power supply
disturbances.
R2 recommended to get faster slopes and a correct
high level of the output pulses.
Rev. 1.7, 11-Oct-2022
1
Document Number: 82485
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
End of Life May-2023 - Alternative Device: TSMP98000
TSMP58000
www.vishay.com
Vishay Semiconductors
PARTS TABLE
Carrier frequency
20 kHz to 60 kHz
TSMP58000
Package
Minicast
Pinning
1 = carrier OUT, 2 = GND, 3 = VS
Dimensions (mm)
5.0 W x 6.95 H x 4.8 D
Mounting
Leaded
Application
Code learning
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
SYMBOL
VALUE
UNIT
Supply voltage (pin 3)
TEST CONDITION
VS
-0.3 to +6
V
Output voltage (pin 1)
VO
-0.3 to (VS + 0.3)
V
Output current (pin 1)
IO
5
mA
Junction temperature
Storage temperature range
Operating temperature range
t ≤ 10 s, 1 mm from case
Soldering temperature
Tj
100
°C
Tstg
-25 to +85
°C
Tamb
-25 to +85
°C
Tsd
260
°C
Note
• Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress rating only
and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this specification
is not implied. Exposure to absolute maximum rating conditions for extended periods may affect the device reliability
ELECTRICAL AND OPTICAL CHARACTERISTICS CARRIER OUT
(Tamb = 25 °C, unless otherwise specified, VS = 3 V)
PARAMETER
Supply current (pin 3)
TEST CONDITION
SYMBOL
MIN.
TYP.
MAX.
UNIT
Ev = 0
ISD
0.55
0.7
0.9
mA
VS
2.5
-
5.5
V
d
-
1.8
-
m
Supply voltage
Ev = 0, test signal see Fig. 1,
IR diode TSAL6200, IF = 50 mA
Transmission distance
IOSL = 0.5 mA, test signal see Fig. 1
VOSL
-
-
250
mV
Minimum irradiance
Output voltage low (pin 1)
VS = 3 V, (20 kHz to 60 kHz)
Ee min.
-
12
25
mW/m2
Maximum irradiance
Test signal see Fig. 1, (20 kHz to 60 kHz)
Ee max.
50
80
-
W/m2
Angle of half transmission distance
ϕ1/2
-
± 45
-
deg
fC = 20 kHz to 60 kHz,
Ee = 25 mW/m2 to 50 W/m2,
test signal see Fig. 1, BER ≤ 2%
N
carrier
pulses
Directivity
Output accuracy
input burst
input burst
input burst
length
length
length
- 1 cycle
+ 1 cycle
counts
TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
Carrier cycle
(26.3 μs in case of 38 kHz)
Optical burst
(input signal)
Delay time td
Output voltage
Fig. 1 - Testsignal
Rev. 1.7, 11-Oct-2022
2
Document Number: 82485
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
End of Life May-2023 - Alternative Device: TSMP98000
TSMP58000
www.vishay.com
Vishay Semiconductors
Axis Title
10000
0.9
0.8
0.7
1000
0.6
1st line
2nd line
2nd line
S(λ)rel. - Relative Spectral Sensitivity
1.0
0.5
0.4
100
0.3
0.2
0.1
0
750
850
950
1050
10
1150
λ - Wavelength (nm)
21425
Fig. 2 - Relative Spectral Sensitivity vs. Wavelength
0°
10°
20°
30°
40°
1.0
0.9
50°
0.8
60°
70°
0.7
80°
0.6
19258
0.4
0.2
0
drel - Relative Transmission Distance
Fig. 3 - Horizontal Directivity
0°
10°
20°
30°
40°
1.0
0.9
50°
0.8
60°
70°
0.7
80°
0.6
19259
0.4
0.2
0
d rel - Relative Transmission Distance
Fig. 4 - Vertical Directivity
Rev. 1.7, 11-Oct-2022
3
Document Number: 82485
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
End of Life May-2023 - Alternative Device: TSMP98000
TSMP58000
www.vishay.com
Vishay Semiconductors
PACKAGE DIMENSIONS in millimeters
5
4.8
(4)
2.8
(5.55)
6.95 ± 0.3
8.25 ± 0.3
R2
0.9
1.1
30.5 ± 0.5
(1.54)
0.85 max.
0.7 max.
2.54 nom.
2.54 nom.
0.5 max.
1.2 ± 0.2
Marking area
technical drawings
according to DIN
specifications
Not indicated to lerances ± 0.2
Drawing-No.: 6.550-5263.01-4
Issue: 12; 16.04.10
19009
Rev. 1.7, 11-Oct-2022
R2
4
Document Number: 82485
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jan-2022
1
Document Number: 91000