End of Life May-2023 - Alternative Device: TSMP95000
TSMP77000
www.vishay.com
Vishay Semiconductors
IR Sensor Module for Remote Control Systems
FEATURES
• Photo detector and preamplifier in one package
• AC coupled response from 20 kHz to 60 kHz, all
data formats
• Improved shielding against electrical field
disturbance
• TTL and CMOS compatibility
• Output active low
• Supply voltage 2.5 V to 5.5 V, typically the
device works in the range between 2.0 V and
5.5 V
• Carrier out signal for code learning functions
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
20953
LINKS TO ADDITIONAL RESOURCES
MECHANICAL DATA
3D 3D
Product Page
3D Models
Pinning:
Calculators
1, 4 = GND, 2 = VS, 3 = carrier OUT
Marking
DESCRIPTION
ORDERING CODE
The TSMP77000 is a two lens miniaturized sensor for
receiving various kinds of modulated IR signals. Two PIN
diodes and a preamplifier are assembled on a lead frame,
the epoxy package is designed as an IR filter. The
modulated output signal, carrier out, can be used for code
learning applications.
Taping:
TSMP77000TT - top view taped, 2200 pcs/reel
TSMP77000TR - side view taped, 2300 pcs/reel
BLOCK DIAGRAM
This component has not been qualified according to
automotive specifications.
2 VS
3 Carrier out
TIA
Amp
Signal shaping
1, 4 GND
19746-3
APPLICATION CIRCUIT
19750-2
V
Circuit
S
Transmitter TSMPxxxx
with
C1 =
TSALxxxx
4.7 µF
OUT
GND
R1 = 100 Ω
R2 =
4.7 kΩ
+ VS
µC
VO
GND
R1 + C1 recommended to suppress power supply disturbances.
R2 recommended to get faster slopes and a correct high level of the
output pulses.
Rev. 2.4, 12-Oct-2022
1
Document Number: 82478
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
End of Life May-2023 - Alternative Device: TSMP95000
TSMP77000
www.vishay.com
Vishay Semiconductors
PARTS TABLE
Carrier frequency
20 kHz to 60 kHz
TSMP77000
Package
Heimdall
Pinning
1, 4 = GND, 2 = VS, 3 = carrier OUT
Dimensions (mm)
6.8 W x 3.0 H x 3.2 D
Mounting
SMD
Application
Code learning
• Extended temperature range: www.vishay.com/doc?82738
• Narrow optical filter: www.vishay.com/doc?81590
• Wide optical flter: www.vishay.com/doc?82726
Special options
ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
SYMBOL
VALUE
UNIT
Supply voltage (pin 2)
TEST CONDITION
VS
-0.3 to +6
V
Output voltage (pin 3)
VO
-0.3 to (VS + 0.3)
V
Output current (pin 3)
IO
5
mA
Junction temperature
Tj
100
°C
Storage temperature range
Tstg
-25 to +85
°C
Operating temperature range
Tamb
-25 to +85
°C
Note
• Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress rating only
and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this specification
is not implied. Exposure to absolute maximum rating conditions for extended periods may affect the device reliability
ELECTRICAL AND OPTICAL CHARACTERISTICS CARRIER OUT
(Tamb = 25 °C, unless otherwise specified, VS = 3 V)
PARAMETER
Supply current (pin 2)
TEST CONDITION
SYMBOL
MIN.
TYP.
MAX.
UNIT
Ev = 0
ISD
0.55
0.7
0.9
mA
VS
2.5
-
5.5
V
d
-
1.8
-
m
Supply voltage
Ev = 0, test signal see Fig. 1,
IR diode TSAL6200, IF = 50 mA
Transmission distance
IOSL = 0.5 mA, test signal see Fig. 1
VOSL
-
-
250
mV
Minimum irradiance
Output voltage low (pin 3)
VS = 3 V, (20 kHz to 60 kHz)
Ee min.
-
12
25
mW/m2
Maximum irradiance
Test signal see Fig. 1,
(20 kHz to 60 kHz)
Ee max.
50
80
-
W/m2
Angle of half transmission distance
ϕ1/2
-
± 50
-
°
fC = 20 kHz to 60 kHz,
Ee = 25 mW/m2 to 50 W/m2,
test signal see Fig. 1, BER ≤ 2%
N
carrier
pulses
Directivity
Output accuracy
Input burst
Input burst
Input burst
length
length
length
- 1 cycle
+ 1 cycle
counts
TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
Carrier cycle
(26.3 μs in case of 38 kHz)
Optical burst
(input signal)
Delay time td
Output voltage
Fig. 1 - Testsignal
Rev. 2.4, 12-Oct-2022
2
Document Number: 82478
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
End of Life May-2023 - Alternative Device: TSMP95000
TSMP77000
www.vishay.com
Vishay Semiconductors
S(λ)rel - Relative Spectral Sensitivity
1.0
0.8
0.6
0.4
0.2
0
700
800
900
1000
1100
λ - Wavelength (nm)
22102
Fig. 2 - Relative Spectral Sensitivity vs. Wavelength
Axis0°
Title 10°
20°
30°
2nd line
Horizontal
0.9
50°
0.8
2nd line
2nd line
40°
1.0
60°
70°
0.7
80°
0.6
0.4
0.2
0
0.2
0.4
0.6
drel. - Relative Transmission Distance
21427
Fig. 3 - Horizontal Directivity
Axis0°
Title 10°
20°
30°
2nd line
Vertical
0.9
50°
0.8
2nd line
2nd line
40°
1.0
60°
70°
0.7
80°
0.6
21428
0.4
0.2
0
0.2
0.4
0.6
drel. - Relative Transmission Distance
Fig. 4 - Vertical Directivity
Rev. 2.4, 12-Oct-2022
3
Document Number: 82478
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
End of Life May-2023 - Alternative Device: TSMP95000
TSMP77000
www.vishay.com
Vishay Semiconductors
PACKAGE DIMENSIONS in millimeters
6.8
6.6 ± 0.1
3.2
(3.4)
Mold residue
Mold residue
2.5
(1.8)
1.2 ± 0.2
3
0.8
2.2
(0.635)
(1)
1.27
(3 x)
0.5 ± 0.1
(4 x)
technical drawings
according to DIN
specifications
3 x 1.27 = 3.81
Marking area
2.2
Not indicated tolerances ± 0.15
(1.65)
Tool separation line
(2.2)
Proposed pad layout
from component side
(for reference only)
3 x 1.27 = 3.81
1.27
Pick and place area
1.8
(R1.3)
Drawing-No.: 6.550-5297.01-4
Issue: 4; 13.09.11
0.8
22608
ASSEMBLY INSTRUCTIONS
Reflow Soldering
Manual Soldering
• Reflow soldering must be done within 72 h while stored
under a max. temperature of 30 °C, 60 % RH after
opening the dry pack envelope
• Use a soldering iron of 25 W or less. Adjust the
temperature of the soldering iron below 300 °C
• Set the furnace temperatures for pre-heating and heating
in accordance with the reflow temperature profile as
shown in the diagram. Exercise extreme care to keep the
maximum temperature below 260 °C. The temperature
shown in the profile means the temperature at the device
surface. Since there is a temperature difference between
the component and the circuit board, it should be verified
that the temperature of the device is accurately being
measured
• Handle products only after the temperature has cooled off
• Finish soldering within 3 s
• Handling after reflow should be done only after the work
surface has been cooled off
Rev. 2.4, 12-Oct-2022
4
Document Number: 82478
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
End of Life May-2023 - Alternative Device: TSMP95000
TSMP77000
www.vishay.com
Vishay Semiconductors
VISHAY LEAD (Pb)-FREE REFLOW SOLDER PROFILE
Axis Title
10000
300
255 °C
240 °C
250
245 °C
217 °C
200
1000
max. 20 s
1st line
2nd line
2nd line
Temperature (°C)
max. 260 °C
150
max. 120 s
max. 100 s
100
100
Max. ramp up 3 °C/s
50
Max. ramp down 6 °C/s
Max. 2 cycles allowed
0
0
50
100
150
200
250
10
300
Time (s)
19800
0.3
3.6
TAPING VERSION TSMP..TR DIMENSIONS in millimeters
16
7.5
1.75
1.34 ref.
Ø 1.5
4
Direction of feed
8
2
Ø 1.5 min.
technical drawings
according to DIN
specifications
Drawing-No.: 9.700-5337.01-4
Issue: 2; 06.10.15
Rev. 2.4, 12-Oct-2022
5
Document Number: 82478
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
End of Life May-2023 - Alternative Device: TSMP95000
TSMP77000
www.vishay.com
Vishay Semiconductors
3.65
0.3
TAPING VERSION TSMP..TT DIMENSIONS in millimeters
16
1.75
7.5
Ø 1.5
4
8
Direction of feed
2
Ø 1.5
technical drawings
according to DIN
specifications
Drawing-No.: 9.700-5338.01-4
Issue: 4; 12.06.13
Rev. 2.4, 12-Oct-2022
6
Document Number: 82478
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
End of Life May-2023 - Alternative Device: TSMP95000
TSMP77000
www.vishay.com
Vishay Semiconductors
REEL DIMENSIONS in millimeters
16734
LEADER AND TRAILER DIMENSIONS in millimeters
Trailer
no devices
Leader
devices
no devices
End
Start
min. 200
min. 400
96 11818
COVER TAPE PEEL STRENGTH
According to DIN EN 60286-3
0.1 N to 1.3 N
300 mm/min. ± 10 mm/min.
165° to 180° peel angle
Rev. 2.4, 12-Oct-2022
7
Document Number: 82478
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
End of Life May-2023 - Alternative Device: TSMP95000
TSMP77000
www.vishay.com
Vishay Semiconductors
OUTER PACKAGING
The sealed reel is packed into a pizza box.
CARTON BOX DIMENSIONS in millimeters
Length
Thickness
Width
22127
Pizza box (SMD and heimdall)
(taping in reels)
THICKNESS
WIDTH
LENGTH
50
340
340
LABEL
Standard bar code labels for finished goods
The standard bar code labels are product labels and used for identification of goods. The finished goods are packed in final
packing area. The standard packing units are labeled with standard bar code labels before transported as finished goods to
warehouses. The labels are on each packing unit and contain Vishay Semiconductor GmbH specific data.
VISHAY SEMICONDUCTOR GmbH STANDARD BAR CODE PRODUCT LABEL (finished goods)
PLAIN WRITTING
Item-description
Item-number
Selection-code
ABBREVIATION
LENGTH
-
18
INO
8
SEL
3
BATCH
10
Data-code
COD
3 (YWW)
Plant-code
PTC
2
Quantity
QTY
8
Accepted by
ACC
-
Packed by
PCK
-
MIXED CODE
-
xxxxxxx+
Company logo
TYPE
LENGTH
LOT-/serial-number
Mixed code indicator
Origin
LONG BAR CODE TOP
Item-number
N
8
Plant-code
N
2
Sequence-number
X
3
Quantity
N
8
Total length
-
21
SHORT BAR CODE BOTTOM
TYPE
LENGTH
Selection-code
X
3
Data-code
N
3
Batch-number
X
10
Filter
-
1
Total length
-
17
Rev. 2.4, 12-Oct-2022
8
Document Number: 82478
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
End of Life May-2023 - Alternative Device: TSMP95000
TSMP77000
www.vishay.com
Vishay Semiconductors
DRY PACKING
ESD PRECAUTION
The reel is packed in an anti-humidity bag to protect the
devices from absorbing moisture during transportation and
storage.
Proper storage and handling procedures should be followed
to prevent ESD damage to the devices especially when they
are removed from the antistatic shielding bag. Electrostatic
sensitive devices warning labels are on the packaging.
Aluminum bag
VISHAY SEMICONDUCTORS STANDARD
BAR CODE LABELS
Label
The Vishay Semiconductors standard bar code labels are
printed at final packing areas. The labels are on each
packing unit and contain Vishay Semiconductors specific
data.
Reel
15973
FINAL PACKING
The sealed reel is packed into a cardboard box.
RECOMMENDED METHOD OF STORAGE
Dry box storage is recommended as soon as the aluminum
bag has been opened to prevent moisture absorption. The
following conditions should be observed, if dry boxes are
not available:
22178
• Storage temperature 10 °C to 30 °C
• Storage humidity ≤ 60 % RH max.
After more than 72 h under these conditions moisture
content will be too high for reflow soldering.
In case of moisture absorption, the devices will recover to
the former condition by drying under the following condition:
192 h at 40 °C + 5 °C / - 0 °C and < 5 % RH (dry air /
nitrogen) or
96 h at 60 °C + 5 °C and < 5 % RH for all device containers
or
24 h at 125 °C + 5 °C not suitable for reel or tubes.
An EIA JEDEC® standard J-STD-020 level 4 label is included
on all dry bags.
CAUTION
This bag contains
MOISTURE-SENSITIVE DEVICES
LEVEL
4
1. Shelf life in sealed bag: 12 months at < 40 °C and < 90 % relative
humidity (RH)
2. After this bag is opened, devices that will be subjected to soldering
reflow or equivalent processing (peak package body temp. 260 °C)
must be
2a. Mounted within 72 hours at factory condition of < 30 °C/60 % RH or
2b. Stored at < 5 % RH
3. Devices require baking befor mounting if:
Humidity Indicator Card is > 10 % when read at 23 °C ± 5 °C or
2a. or 2b. are not met.
4. If baking is required, devices may be baked for:
192 hours at 40 °C + 5 °C/- 0 °C and < 5 % RH (dry air/nitrogen) or
96 hours at 60 °C ± 5 °C and < 5 % RH for all device containers or
24 hours at 125 °C ± 5 °C not suitable for reels or tubes
Bag Seal Date:
(If blank, see barcode label)
Note: Level and body temperature defined by EIA JEDEC Standard J-STD-020
22522
EIA JEDEC standard J-STD-020 level 4 label
is included on all dry bags
Rev. 2.4, 12-Oct-2022
9
Document Number: 82478
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jan-2022
1
Document Number: 91000