TSOP393..TR1, TSOP395..TR1
www.vishay.com
Vishay Semiconductors
IR Receiver Modules for Remote Control Systems
FEATURES
• Very low supply current
• Photo detector and preamplifier in one package
4
• Internal filter for PCM frequency
3
• Supply voltage: 2.5 V to 5.5 V
2
1
• Improved immunity against ambient light
• Two lenses for high sensitivity
• Insensitive to supply voltage ripple and noise
• Ultra low 2.6 mm profile
• Winged for mounting within PCB cutout
22964
• Compatible with reflow soldering
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
LINKS TO ADDITIONAL RESOURCES
MECHANICAL DATA
3D 3D
Product Page
3D Models
Pinning:
Calculators
Marking
1, 4 = GND, 2 = VS, 3 = OUT
DESCRIPTION
ORDERING CODE
The TSOP39...TR1 series are miniaturized receiver modules
for infrared remote control systems. Two PIN diodes and a
preamplifier are assembled on a leadframe, the epoxy
package contains an IR filter. The demodulated output
signal can be directly connected to digital circuitry for
decoding.
Taping:
TSOP39...TR1 - top view taped, 2000 pcs/reel
BLOCK DIAGRAM
2
The TSOP393..TR1 series devices are optimized to
suppress almost all spurious pulses from energy saving
lamps like CFLs. These AGC3 devices may also suppress
some data signals if continuously transmitted.
30 k Ω
VS
3
Input
The TSOP395..TR1 series contains a very robust AGC5.
This series should only be used for critically noisy
environments.
Band
pass
AGC
OUT
Demodulator
1, 4
PIN
These components have not been qualified according to
automotive specifications.
GND
Control circuit
20445-1
APPLICATION CIRCUIT
17170-11
R1
IR receiver
VS
Circuit
Transmitter
with
TSALxxxx
+ VS
C1
μC
OUT
GND
VO
GND
R1 and C1 recommended to reduce supply ripple for VS < 2.8 V
Rev. 1.6, 14-Apr-2021
1
Document Number: 82774
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TSOP393..TR1, TSOP395..TR1
www.vishay.com
Vishay Semiconductors
PARTS TABLE
NOISY ENVIRONMENTS
AND SHORT BURSTS (AGC3)
VERY NOISY ENVIRONMENTS
AND SHORT BURSTS (AGC5)
30 kHz
TSOP39330TR1
TSOP39530TR1
33 kHz
TSOP39333TR1
TSOP39533TR1
36 kHz
TSOP39336TR1 (1)
TSOP39536TR1
38 kHz
TSOP39338TR1 (2)(3)(4)(5)
TSOP39538TR1
40 kHz
TSOP39340TR1
TSOP39540TR1
56 kHz
TSOP39356TR1
AGC
Carrier
frequency
TSOP39556TR1
Package
TVCastSMD
Pinning
1, 4 = GND, 2 = VS, 3 = OUT
Dimensions (mm)
6.8 W x 2.6 H x 5.3 D
Mounting
SMD
Application
Remote control
(1)
Best choice for
MCIR
(2)
Mitsubishi
(3)
RECS-80 Code
(4)
r-map
(5)
XMP-1, XMP-2
ABSOLUTE MAXIMUM RATINGS
PARAMETER
Supply voltage
Supply current
Output voltage
Output current
Junction temperature
Storage temperature range
Operating temperature range
Power consumption
TEST CONDITION
SYMBOL
VALUE
UNIT
Tamb ≤ 85 °C
VS
IS
VO
IO
Tj
Tstg
Tamb
Ptot
-0.3 to +6
3
-0.3 to (VS + 0.3)
5
100
-25 to +85
-25 to +85
10
V
mA
V
mA
°C
°C
°C
mW
Note
• Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress rating only
and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this specification
is not implied. Exposure to absolute maximum rating conditions for extended periods may affect the device reliability
ELECTRICAL AND OPTICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
PARAMETER
TEST CONDITION
Supply voltage
Supply current
Transmission distance
Output voltage low
Minimum irradiance
Maximum irradiance
Directivity
Rev. 1.6, 14-Apr-2021
Ev = 0, VS = 3.3 V
Ev = 40 klx, sunlight
Ev = 0, test signal see Fig. 1,
IR diode TSAL6200, IF = 50 mA
IOSL = 0.5 mA, Ee = 0.7 mW/m2, test signal see Fig. 1
Pulse width tolerance:
tpi - 5/fo < tpo < tpi + 6/fo, test signal see Fig. 1
tpi - 5/fo < tpo < tpi + 6/fo, test signal see Fig. 1
Angle of half transmission distance
2
SYMBOL
MIN.
TYP.
MAX.
UNIT
VS
ISD
ISH
2.5
0.27
-
0.35
0.45
5.5
0.45
-
V
mA
mA
d
-
30
-
m
VOSL
-
-
100
mV
Ee min.
-
0.08
0.12
mW/m2
Ee max.
ϕ1/2
30
-
± 50
-
W/m2
°
Document Number: 82774
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TSOP393..TR1, TSOP395..TR1
www.vishay.com
Vishay Semiconductors
TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified)
Optical Test Signal
(IR diode TSAL6200, IF = 0.4 A, N = 6 pulses, f = f0, t = 10 ms)
0.8
t
tpi *)
T
*) tpi ≥ 6/f0 is recommended for optimal function
Output Signal
VO
1)
2)
VOH
VOL
td
14337
3/f0 < td < 9/f0
tpi - 4/f0 < tpo < tpi + 6/f0
1)
tpo
ton
ton, toff - Output Pulse Width (ms)
Ee
0.7
0.6
0.5
toff
0.4
0.3
0.2
0
0.1
20744
t
2)
Ee min./Ee - Relative Responsivity
tpo - Output Pulse Width (ms)
100
1000
10 000
1.2
0.35
0.30
Output pulse width
0.20
0.15
Input burst length
0.10
0.05
λ = 950 nm,
optical test signal, Fig. 1
1.0
0.8
0.6
0.4
f = f0 ± 5 %
Δf(3 dB) = f0/10
0.2
0.0
0
0.1
1
10
100
1000
10 000
0.7
Ee - Irradiance (mW/m²)
20760
0.9
1.1
1.3
f/f0 - Relative Frequency
16925
Fig. 2 - Pulse Length and Sensitivity in Dark Ambient
Fig. 5 - Frequency Dependence of Responsivity
Ee min. - Threshold Irradiance (mW/m²)
Optical Test Signal
600 µs
t
600 µs
t = 60 ms
VO
10
Fig. 4 - Output Pulse Diagram
0.40
Ee
1
Ee - Irradiance (mW/m²)
Fig. 1 - Output Active Low
0.25
λ = 950 nm,
optical test signal, fig. 3
0.1
94 8134
Output Signal, (see Fig. 4)
VOH
4.0
Correlation with ambient light sources:
3.5 10 W/m² = 1.4 klx (std. illum. A, T = 2855 K)
10 W/m² = 8.2 klx (daylight, T = 5900 K)
3.0
2.5
2.0
1.5
1.0
0.5
0
0.01
VOL
t on
t off
t
20745
Fig. 3 - Output Function
Rev. 1.6, 14-Apr-2021
Wavelength of ambient
illumination: λ = 950 nm
0.1
1
10
100
Ee - Ambient DC Irradiance (W/m²)
Fig. 6 - Sensitivity in Bright Ambient
3
Document Number: 82774
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TSOP393..TR1, TSOP395..TR1
www.vishay.com
Vishay Semiconductors
1.0
2.5
f = f0
f = 30 kHz
f = 10 kHz
f = 100 Hz
2.0
1.5
1.0
0.5
0
1
10
100
1000
10000
0.9
0.8
0.7
1000
0.6
1st line
2nd line
2nd line
S(λ)rel. - Relative Spectral Sensitivity
Ee min. - Threshold Irradiance (mW/m2)
Axis Title
3.0
0.5
0.4
100
0.3
0.2
0.1
0
750
ΔVS RMS - AC Voltage on DC Supply Voltage (mV)
850
1050
10
1150
λ - Wavelength (nm)
21425
Fig. 7 - Sensitivity vs. Supply Voltage Disturbances
950
Fig. 10 - Relative Spectral Sensitivity vs. Wavelength
0°
10°
20°
1.0
30°
Max. Envelope Duty Cycle
0.9
f = 38 kHz, Ee = 2 mW/m²
0.8
0.7
40°
0.6
1.0
0.5
0.9
50°
0.8
60°
0.4
0.3
TSOP393..
0.2
70°
0.7
80°
0.1
TSOP395..
0
0
20
40
60
80
100
0.6
120
0.4
0.2
0
drel - Relative Transmission Distance
Burst Length (number of cycles/burst)
Fig. 8 - Max. Envelope Duty Cycle vs. Burst Length
Fig. 11 - Horizontal Directivity
Ee min. - Threshold Irradiance (mW/m2)
0°
10°
20°
0.20
30°
0.18
0.16
0.14
40°
1.0
0.12
0.10
0.9
50°
0.08
0.8
60°
0.06
70°
0.7
0.04
80°
0.02
0
-30
-10
10
30
50
70
0.6
90
0.4
0.2
0
Tamb - Ambient Temperature (°C)
drel - Relative Transmission Distance
Fig. 9 - Sensitivity vs. Ambient Temperature
Fig. 12 - Vertical Directivity
Rev. 1.6, 14-Apr-2021
4
Document Number: 82774
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TSOP393..TR1, TSOP395..TR1
www.vishay.com
Vishay Semiconductors
Ee min. - Sensitivity (mW/m2)
0.20
0.18
0.16
0.14
0.12
0.10
0.08
0.06
0.04
0.02
0.00
1
2
3
4
5
VS - Supply Voltage (V)
Fig. 13 - Sensitivity vs. Supply Voltage
Rev. 1.6, 14-Apr-2021
5
Document Number: 82774
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TSOP393..TR1, TSOP395..TR1
www.vishay.com
Vishay Semiconductors
SUITABLE DATA FORMAT
Axis Title
This series is designed to suppress spurious output pulses
due to noise or disturbance signals. The devices can
distinguish data signals from noise due to differences in
frequency, burst length, and envelope duty cycle. The data
signal should be close to the device’s band-pass center
frequency (e.g. 38 kHz) and fulfill the conditions in the table
below
10000
7
6
When a data signal is applied to the product in the presence
of a disturbance, the sensitivity of the receiver is
automatically reduced by the AGC to insure that no spurious
pulses are present at the receiver’s output.
1000
1st line
2nd line
2nd line
IR Signal Amplitude
5
4
3
100
2
1
Some examples which are suppressed are:
10
0
• DC light (e.g. from tungsten bulbs sunlight)
0
• Continuous signals at any frequency
5
10
15
20
Time (ms)
16920
• Strongly or weakly modulated pattern from fluorescent
lamps with electronic ballasts (see Fig. 14 or Fig. 15)
Fig. 14 - IR Disturbance from Fluorescent Lamp
With Low Modulation
Axis Title
10000
40
1000
0
1st line
2nd line
2nd line
IR Signal Amplitude
20
-20
100
-40
10
-60
0
5
10
15
20
Time (ms)
16921
Fig. 15 - IR Disturbance from Fluorescent Lamp
With High Modulation
TSOP393..TR1
TSOP395..TR1
Minimum burst length
6 cycles/burst
6 cycles/burst
After each burst of length
a minimum gap time is required of
6 to 35 cycles
≥ 10 cycles
6 to 24 cycles
≥ 10 cycles
35 cycles
24 cycles
> 4 x burst length
> 25 ms
2000
2000
MCIR code
Preferred
Yes
XMP-1, XMP-2 code
Preferred
Yes
Mild and complex disturbance
patterns are suppressed (example:
signal patterns of Fig. 14 and Fig. 15)
Critical disturbance
patterns are suppressed,
e.g. highly dimmed LCDs
For bursts greater than
a minimum gap time in the data stream is needed of
Maximum number of continuous short bursts/second
Suppression of interference from fluorescent lamps
Note
• For data formats with long bursts please see the datasheet for TSOP392..TR1, TSOP394..TR1
Rev. 1.6, 14-Apr-2021
6
Document Number: 82774
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TSOP393..TR1, TSOP395..TR1
www.vishay.com
Vishay Semiconductors
PACKAGE DIMENSIONS in millimeters
Less
Mo
ive
sensit
angle
6.8
re s
e
ang nsitiv
e
le
2.6
5.9
R1.5
(1.6)
R1.5
R1.5
(0.6)
4
7 ± 0.3
5.3
0.7
Marking area
GND
VS
OUT
GND
Area not plane
0.9
1.15
0.6 max.
1.27 nom.
0.4 ± 0.1
1.27 nom.
Proposed hole layout
from component side
(for reference only)
3 x 1.27 = 3.81
Technical drawings
according to DIN
specification.
(7.1)
(5.3)
(2.6)
(6.1)
(4.9)
(2.54)
(1.27)
0.5
Not indicated tolerances ± 0.2
Drawing-No.: MM-200-220.01-4
Issue 1: 11.04.17
(0.8)
(0.25)
(0.7) (4 x)
(1.27)
(3.05)
Rev. 1.6, 14-Apr-2021
°)
(45
(0.635)
(0.7) (4 x)
7
Document Number: 82774
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TSOP393..TR1, TSOP395..TR1
www.vishay.com
Vishay Semiconductors
VISHAY LEAD (Pb)-FREE REFLOW SOLDER PROFILE
Axis Title
300
10000
max. 260 °C
255 °C
240 °C
2nd line
Temperature (°C)
250
245 °C
217 °C
1000
200
max. 20 s
150
max. 120 s
max. 100 s
100
100
Max. ramp up 3 °C/s
50
Max. ramp down 6 °C/s
Max. 2 cycles allowed
10
0
0
50
100
150
200
250
300
Time (s)
19800
TAPING VERSION TSOP..TR1 DIMENSIONS in millimeters
(7.35)
(1.7)
(5.58)
(2.85)
A-A (2:1)
(16)
(7.5)
(1.75)
B-B (2:1)
(7.05)
B
B
(0.3)
A
(2)
(Ø 1.5)
Direction of feed
(4)
(12)
A
(Ø 1.5)
Technical drawings
according to DIN
specification.
Drawing-No.: MM-200-229.01-4_Z
Issue A: 24.04.17
Rev. 1.6, 14-Apr-2021
8
Document Number: 82774
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TSOP393..TR1, TSOP395..TR1
www.vishay.com
Vishay Semiconductors
REEL DIMENSIONS in millimeters
Packing quantity - 2000 pieces per reel
16734
LEADER AND TRAILER DIMENSIONS in millimeters
Trailer
no devices
Leader
devices
no devices
End
Start
min. 200
min. 400
96 11818
Rev. 1.6, 14-Apr-2021
9
Document Number: 82774
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TSOP393..TR1, TSOP395..TR1
www.vishay.com
Vishay Semiconductors
OUTER PACKAGING
The sealed reel is packed into a pizza box.
CARTON BOX DIMENSIONS in millimeters
Length
Thickness
22127
Width
Pizza box
(Belobog, Panhead, Heimdall, TVCast SMD, and Minimold DF1P)
(taping in reels)
THICKNESS
WIDTH
LENGTH
50
340
340
COVER TAPE PEEL STRENGTH
LABEL
According to DIN EN 60286-3
Standard bar code labels for finished goods
0.1 N to 1.3 N
The standard bar code labels are product labels and used
for identification of goods. The finished goods are packed in
final packing area. The standard packing units are labeled
with standard bar code labels before transported as finished
goods to warehouses. The labels are on each packing unit
and contain Vishay Semiconductor GmbH specific data.
300 ± 10 mm/min.
165° to 180° peel angle
VISHAY SEMICONDUCTOR GmbH STANDARD BAR CODE PRODUCT LABEL (finished goods)
PLAIN WRITING
ABBREVIATION
LENGTH
Item-description
-
18
INO
8
Item-number
Selection-code
SEL
3
BATCH
10
Data-code
COD
3 (YWW)
Plant-code
PTC
2
Quantity
QTY
8
Accepted by
ACC
-
Packed by
PCK
-
MIXED CODE
-
xxxxxxx+
Company logo
TYPE
LENGTH
LOT-/serial-number
Mixed code indicator
Origin
LONG BAR CODE TOP
Item-number
N
8
Plant-code
N
2
Sequence-number
X
3
Quantity
N
8
Total length
-
21
SHORT BAR CODE BOTTOM
TYPE
LENGTH
Selection-code
X
3
Data-code
N
3
Batch-number
X
10
Filter
-
1
Total length
-
17
Rev. 1.6, 14-Apr-2021
10
Document Number: 82774
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TSOP393..TR1, TSOP395..TR1
www.vishay.com
Vishay Semiconductors
DRY PACKING
ESD PRECAUTION
The reel is packed in an anti-humidity bag to protect the
devices from absorbing moisture during transportation and
storage.
Proper storage and handling procedures should be followed
to prevent ESD damage to the devices especially when they
are removed from the antistatic shielding bag. Electrostatic
sensitive devices warning labels are on the packaging.
Aluminum bag
VISHAY SEMICONDUCTORS STANDARD
BAR CODE LABELS
Label
The Vishay Semiconductors standard bar code labels are
printed at final packing areas. The labels are on each
packing unit and contain Vishay Semiconductors specific
data.
Reel
15973
FINAL PACKING
The sealed reel is packed into a cardboard box.
RECOMMENDED METHOD OF STORAGE
22178
Dry box storage is recommended as soon as the aluminum
bag has been opened to prevent moisture absorption. The
following conditions should be observed, if dry boxes are
not available:
• Storage temperature 10 °C to 30 °C
• Storage humidity ≤ 60 % RH max.
After more than 72 h under these conditions moisture
content will be too high for reflow soldering.
In case of moisture absorption, the devices will recover to
the former condition by drying under the following condition:
192 h at 40 °C + 5 °C / - 0 °C and < 5 % RH (dry air /
nitrogen) or
96 h at 60 °C + 5 °C and < 5 % RH for all device containers
or
24 h at 125 °C + 5 °C not suitable for reel or tubes.
An EIA JEDEC® standard J-STD-020 level 4 label is included
on all dry bags.
CAUTION
This bag contains
MOISTURE-SENSITIVE DEVICES
LEVEL
4
1. Shelf life in sealed bag: 12 months at < 40 °C and < 90 % relative
humidity (RH)
2. After this bag is opened, devices that will be subjected to soldering
reflow or equivalent processing (peak package body temp. 260 °C)
must be
2a. Mounted within 72 hours at factory condition of < 30 °C/60 % RH or
2b. Stored at < 5 % RH
3. Devices require baking befor mounting if:
Humidity Indicator Card is > 10 % when read at 23 °C ± 5 °C or
2a. or 2b. are not met.
4. If baking is required, devices may be baked for:
192 hours at 40 °C + 5 °C/- 0 °C and < 5 % RH (dry air/nitrogen) or
96 hours at 60 °C ± 5 °C and < 5 % RH for all device containers or
24 hours at 125 °C ± 5 °C not suitable for reels or tubes
Bag Seal Date:
(If blank, see barcode label)
Note: Level and body temperature defined by EIA JEDEC Standard J-STD-020
22522
EIA JEDEC standard J-STD-020 level 4 label is included
on all dry bags
Rev. 1.6, 14-Apr-2021
11
Document Number: 82774
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 09-Jul-2021
1
Document Number: 91000
工商网监
湘ICP备2023018690号
