U3B-M3/9AT

U3B, U3C, U3D www.vishay.com Vishay General Semiconductor Surface Mount Ultrafast Plastic Rectifier FEATURES • Oxide planar chip junction • Ultrafast recovery time • Low forward voltage, low power losses • High forward surge capability • Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 SMC (DO-214AB) TYPICAL APPLICATIONS For us in high frequency rectification and freewheeling application in switching mode converters and inverters for consumer, computer, automotive and telecommunication. PRIMARY CHARACTERISTICS IF(AV) 3.0 A VRRM 100 V, 150 V, 200 V IFSM 100 A MECHANICAL DATA trr 20 ns VF at IF = 3.0 A 0.74 V TJ max. 150 °C Package SMC (DO-214AB) Circuit configuration Single Case: SMC (DO-214AB) Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS-compliant, commercial grade Base P/N-M3 - halogen-free, RoHS-compliant, and commercial grade Terminals: matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 E3 and M3 suffix meets JESD 201 class 2 whisker test Polarity: color band denotes cathode end MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL Device marking code Maximum repetitive peak reverse voltage Maximum average forward rectified current (fig. 1) VRRM U3B U3C U3D U3B U3C U3D 100 150 200 UNIT V TM = 134 °C IF(AV) (1) 2.0 TM = 125 °C IF(AV) (2) 3.0 IFSM 100 A TJ, TSTG -55 to +150 °C Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load Operating junction and storage temperature range A Notes (1) Free air, mounted on recommended copper pad area (2) Units mounted on PCB with 0.47" x 0.47" (12 mm x 12 mm) copper pad areas Revision: 09-Aug-2018 Document Number: 89066 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 U3B, U3C, U3D www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS Instantaneous forward voltage IF = 3.0 A Reverse current Rated VR VF (1) TA = 100 °C TA = 25 °C Storage charge IF = 3.0 A, dI/dt = 50 A/μs, VR = 30 V, Irr = 0.1 IRM Typical junction capacitance 4.0 V, 1 MHz MAX. 0.85 0.90 0.74 0.83 - 10 500 - 20 25 30 TA = 100 °C 35 50 TA = 25 °C 9 15 22 35 25 - TA = 25 °C IF = 3.0 A, dI/dt = 50 A/μs, VR = 30 V, Irr = 0.1 IRM TYP. 250 IR (2) TA = 100 °C IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A Reverse recovery time SYMBOL TA = 25 °C trr TA = 25 °C Qrr TA = 100 °C CJ UNIT V μA ns nC pF Notes (1) Pulse test: 300 µs pulse width, 1 % duty cycle (2) Pulse test: Pulse width  40 ms THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL U3C 92 RJM (1) 10 RJA Typical thermal resistance U3B (1) U3D UNIT °C/W Note (1) Free air, mounted on recommended copper pad area. Thermal resistance R JA - junction to ambient, RJM - junction to mount ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE U3D-E3/57T 0.239 57T 850 7" diameter plastic tape and reel U3D-E3/9AT 0.239 9AT 3500 13" diameter plastic tape and reel U3D-M3/57T 0.239 57T 850 7" diameter plastic tape and reel U3D-M3/9AT 0.239 9AT 3500 13" diameter plastic tape and reel RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 3.0 D = 0.5 2.0 1.0 D = 0.8 D = 0.3 2.5 Average Power Loss (W) Average Forward Rectified Current (A) 3.0 D = 0.2 2.0 D = 1.0 D = 0.1 1.5 T 1.0 0.5 D = tp/T tp 0 0 80 90 100 110 120 130 140 150 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 TM - Mount Temperature (°C) Average Forward Current (A) Fig. 1 - Maximum Forward Current Derating Curve Fig. 2 - Forward Power Loss Characteristics Revision: 09-Aug-2018 Document Number: 89066 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 U3B, U3C, U3D www.vishay.com Vishay General Semiconductor 100 TA = 150 °C 10 TA = 125 °C 1 TA = 100 °C TA = 25 °C 0.1 10 0.01 0.1 0.3 0.5 0.7 0.9 1.1 0.1 1.3 1 10 100 Instantaneous Forward Voltage (V) Reverse Voltage (V) Fig. 3 - Typical Instantaneous Forward Characteristics Fig. 5 - Typical Junction Capacitance 100 Transient Thermal Impedance (°C/W) 10 000 Instantaneous Reverse Leakage Current (μA) TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p Junction Capactiance (pF) Instantaneous Forward Current (A) 100 TA = 150 °C TA = 125 °C 1000 TA = 100 °C 100 10 TA = 25 °C 1 0.1 10 20 30 40 50 60 70 80 90 Junction to Ambient 10 1 0.1 0.001 100 0.01 0.1 1 10 100 Percent of Rated Peak Reverse Voltage (%) t - Pulse Duration (s) Fig. 4 - Typical Reverse Leakage Characteristics Fig. 6 - Typical Transient Thermal Impedance PACKAGE OUTLINE DIMENSIONS in inches (millimeters) SMC (DO-214AB) Cathode Band Mounting Pad Layout 0.185 (4.69) MAX. 0.246 (6.22) 0.220 (5.59) 0.126 (3.20) 0.114 (2.90) 0.126 (3.20) MIN. 0.280 (7.11) 0.260 (6.60) 0.060 (1.52) MIN. 0.012 (0.305) 0.006 (0.152) 0.320 (8.13) REF. 0.103 (2.62) 0.079 (2.06) 0.060 (1.52) 0.030 (0.76) 0.008 (0.2) 0 (0) 0.320 (8.13) 0.305 (7.75) Revision: 09-Aug-2018 Document Number: 89066 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2019 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2019 1 Document Number: 91000 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: U3B-E3/57T U3B-E3/9AT U3C-E3/57T U3C-E3/9AT U3D-E3/57T U3D-E3/9AT