UH2BHE3_A/I

End of Life - October 2021 - Alternative Device: VS-2EGH02HM3_A UH2B, UH2C www.vishay.com Vishay General Semiconductor Surface-Mount Ultrafast Rectifier FEATURES • Low profile package • Ideal for automated placement • Oxide planar chip junction • Ultrafast recovery times for high frequency • Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C • AEC-Q101 qualified available - Automotive ordering code: base P/NHE3 SMB (DO-214AA) Cathode Anode • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 LINKS TO ADDITIONAL RESOURCES TYPICAL APPLICATIONS 3D 3D For use in secondary rectification and freewheeling for ultrafast switching speeds of AC/AC and DC/DC converters in high temperature conditions for both consumer and automotive applications. 3D Models PRIMARY CHARACTERISTICS IF(AV) 2.0 A VRRM 100 V, 150 V IFSM 50 A trr 25 ns VF at IF = 2.0 A 0.69 V TJ max. 175 °C Package SMB (DO-214AA) Circuit configuration Single MECHANICAL DATA Case: SMB (DO-214AA) Molding compound meets UL 94 V-0 flammability rating Base P/NHE3_X - RoHS-compliant, AEC-Q101 qualified (“_X” denotes revision code e.g. A, B,.....) Terminals: matte tin plated leads, solderable J-STD-002 and JESD 22-B102 HE3 suffix meets JESD 201 class 2 whisker test per Polarity: color band denotes cathode end MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL Device marking code UH2B UH2C HB HC UNIT Maximum repetitive peak reverse voltage VRRM Maximum average forward rectified current (fig. 1) (1) IF(AV) 2.0 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 50 A TJ, TSTG -55 to +175 °C Operating junction and storage temperature range 100 150 V Note (1) Free air, mounted on recommended copper pad area Revision: 05-May-2021 Document Number: 89108 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 End of Life - October 2021 - Alternative Device: VS-2EGH02HM3_A UH2B, UH2C www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS SYMBOL IF = 1.0 A Instantaneous forward voltage TA = 25 °C IF = 2.0 A VF (1) IF = 1.0 A TA = 125 °C IF = 2.0 A TA = 25 °C Reverse current Rated VR Maximum reverse recovery time IF = 0.5 A, IR = 1.0 A, lrr = 0.25 A Typical reverse recovery time IF = 1.0 A, dI/dt = 50 A/μs, VR = 30 V, lrr = 0.1 IRM TA = 125 °C IF = 2.0 A, dI/dt = 200 A/μs, VR = 200 V - 0.87 1.05 0.62 - 0.69 0.90 - 2.0 10 50 15 25 20 35 UNIT V μA trr S 0.3 - TA = 125 °C IRM 5.0 6.0 A Qrr 55 - nC CJ 42 - pF Typical stored charge Typical junction capacitance MAX. 0.79 TA = 25 °C Typical softness factor (tb/ta) Typical reverse recovery current IR (2) TYP. 4.0 V, 1 MHz ns Notes (1) Pulse test: 300 μs pulse width, 1 % duty cycle (2) Pulse test: Pulse width ≤ 40 ms THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL Typical thermal resistance UH2B UH2C RθJA (1) 105 RθJM (1) 15 UNIT °C/W Note (1) Free air, mounted on recommended copper pad area. Thermal resistance R θJA - junction to ambient, RθJM - junction to mount ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE UH2CHE3_A/H (1) 0.100 H 750 7" diameter plastic tape and reel UH2CHE3_A/I (1) 0.100 I 3200 13" diameter plastic tape and reel Note AEC-Q101 qualified (1) Revision: 05-May-2021 Document Number: 89108 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 End of Life - October 2021 - Alternative Device: VS-2EGH02HM3_A UH2B, UH2C www.vishay.com Vishay General Semiconductor RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) Axis Title Resistive or Inductive Load 2.0 1.6 1.2 0.8 TM Measured at Mount of Terminal 0.4 TJ = 175 °C 100 TJ = 150 °C TJ = 125 °C 10 1000 TJ = 100 °C 1st line 1st line 2nd line 2nd line 2nd line Instantaneous Reverse Current (µA) Average Forward Rectified Current (A) 10000 1000 2.4 1 TJ = 25 °C 0.1 100 0.01 TJ = -40 °C 10 0.001 0 95 105 115 125 135 145 165 155 175 10 20 30 40 50 60 70 90 100 TM - Mount Temperature (°C) Percent of Rated Peak Reverse Voltage (%) Fig. 1 - Maximum Forward Current Derating Curve Fig. 4 - Typical Reverse Characteristics 2.0 100 1.8 D = 0.5 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p D = 0.8 Junction Capacitance (pF) D = 0.3 Average Power Loss (W) 80 1.6 D = 0.2 1.4 D = 0.1 D = 1.0 1.2 1.0 0.8 T 0.6 0.4 0.2 D = tp/T tp 1.6 2.0 0 10 0 0.4 0.8 1.2 2.4 0.1 1 10 100 Average Forward Current (A) Reverse Voltage (V) Fig. 2 - Forward Power Loss Characteristics Fig. 5 - Typical Junction Capacitance Axis Title TJ = 175 °C TJ = 150 °C 10 1000 TJ = 125 °C 1 TJ = 100 °C 100 0.1 TJ = 25 °C TJ = -40 °C 0.01 10 0.2 0.4 0.6 0.8 1.0 1.2 1.4 Instantaneous Forward Voltage (V) Fig. 3 - Typical Instantaneous Forward Characteristics Transient Thermal Impedance (°C/W) 2nd line Instantaneous Forward Current (A) 1000 10000 100 Junction to Ambient 100 10 1 0.001 0.01 0.1 1 10 100 t - Pulse Duration (s) Fig. 6 - Typical Transient Thermal Impedance Revision: 05-May-2021 Document Number: 89108 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 End of Life - October 2021 - Alternative Device: VS-2EGH02HM3_A UH2B, UH2C www.vishay.com Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) SMB (DO-214AA) Cathode Band Mounting Pad Layout 0.085 (2.159) MAX. 0.155 (3.94) 0.130 (3.30) 0.086 (2.20) 0.077 (1.95) 0.086 (2.18) MIN. 0.180 (4.57) 0.160 (4.06) 0.060 (1.52) MIN. 0.012 (0.305) 0.006 (0.152) 0.220 (5.59) REF. 0.096 (2.44) 0.084 (2.13) 0.060 (1.52) 0.030 (0.76) 0.008 (0.2) 0 (0) 0.220 (5.59) 0.205 (5.21) Revision: 05-May-2021 Document Number: 89108 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: UH2BHE3_A/H UH2BHE3_A/I UH2CHE3_A/H UH2CHE3_A/I