UHF5JT-E3/4W

UH5JT, UHF5JT www.vishay.com Vishay General Semiconductor High Voltage Ultrafast Rectifier FEATURES • Oxide planar chip junction • Ultrafast recovery time TO-220AC ITO-220AC • Soft recovery characteristics • Low switching losses, high efficiency • High forward surge capability • Solder bath temperature 275 °C maximum, 10 s per JESD 22-B106 2 2 1 1 UH5JT UHF5JT PIN 1 PIN 2 PIN 1 CASE • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 TYPICAL APPLICATIONS PIN 2 For use in high voltage continuous mode power factor correctors (CCM PFC), switching mode power supplies, freewheeling diodes and secondary DC/DC rectification application. PRIMARY CHARACTERISTICS MECHANICAL DATA IF(AV) 5A VRRM 600 V IFSM 60 A trr 25 ns VF at IF = 5.0 A 1.39 V TJ max. 175 °C Case: TO-220AC, ITO-220AC Molding compound meets UL 94V-0 flammability rating Base P/N - RoHS-compliant, commercial grade Terminals: Matte tin plated leads, solderable J-STD-002 and JESD22-B102 E3 suffix meets JESD 201 class 1A whisker test per Polarity: As marked Mounting Torque: 10 in-lbs maximum MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL UH5JT UHF5JT UNIT Maximum repetitive peak reverse voltage VRRM 600 V Maximum average forward rectified current (Fig. 1) IF(AV) 5 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 60 A Isolation voltage (ITO-220AC only) from terminal to heatsink t = 1 min VAC 1500 V TJ, TSTG - 55 to + 175 °C Operating junction and storage temperature range Revision: 07-Dec-12 Document Number: 88999 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 UH5JT, UHF5JT www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS IF = 2.5 A TA = 25 °C IF = 5.0 A Instantaneous forward voltage (1) VF IF = 2.5 A TA = 125 °C IF = 5.0 A Reverse current (2) TA = 25 °C VR = 600 V TA = 125 °C IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A Maximum reverse recovery time IF = 1.0 A, dI/dt = 50 A/μs, VR = 30 V, Irr = 0.1 IRM Typical softness factor (tp/ta) Typical reverse recovery current Typical stored charge Typical forward recovery time SYMBOL IR TYP. MAX. 1.71 - 2.3 3.0 1.13 - 1.39 1.8 - 5.0 - 100 - 25 - 40 UNIT V μA ns trr S 0.55 - - IF = 5 A, dI/dt = 200 A/μs, VR = 400 V, TJ = 125 °C IRM 5.8 7.0 A Qrr 140 - nC IF = 5 A, dI/dt = 40 A/μs, VF = 1.1 x VF max., tfr 160 - ns SYMBOL UH5JT UHF5JT UNIT RJC 3.0 6.6 °C/W Notes (1) Pulse test: 300 μs pulse width, 1 % duty cycle (2) Pulse test: Pulse width,  40 ms THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Typical thermal resistance from junction to case ORDERING INFORMATION (Example) PACKAGE UNIT WEIGHT (g) PACKAGE CODE BASE QUANTITY DELIVERY MODE TO-220AC PREFERRED P/N UH5JT-E3/4W 1.83 4W 50/tube Tube ITO-220AC UHF5JT-E3/4W 1.70 4W 50/tube Tube RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 6 9 D = 0.3 5 UH5JT UHF5JT 4 D = 0.5 D = 0.8 8 Average Power Loss (W) Average Forward Current (A) Resistive or Inductive Load 3 2 D = 0.2 7 D = 0.1 6 D = 1.0 5 4 T 3 2 1 1 0 D = tp/T tp 4 5 0 0 25 50 75 100 125 150 175 0 1 2 3 6 Case Temperature (°C) Average Forward Current (A) Fig. 1 - Maximum Forward Current Derating Curve Fig. 2 - Forward Power Loss Characteristics Revision: 07-Dec-12 Document Number: 88999 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 UH5JT, UHF5JT www.vishay.com Vishay General Semiconductor 100 10 TA = 150 °C 1 TA = 25 °C 0.1 0.01 0 0.3 0.6 0.9 1.2 1.5 1.8 2.1 2.4 2.7 10 1 0.1 3.0 1 10 100 Instantaneous Forward Voltage (V) Reverse Voltage (V) Fig. 3 - Typical Instantaneous Forward Characteristics Fig. 5 - Typical Junction Capacitance 10 Transient Thermal Impedance (°C/W) 1000 Instantaneous Reverse Current (µA) TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p TA = 175 °C Junction Capacitance (pF) Instantaneous Forward Current (A) 100 TA = 175 °C 100 TA = 150 °C 10 1 TA = 25 °C 0.1 1 0.01 0.01 10 20 30 40 50 60 70 80 90 Junction to Case 100 0.1 1 10 100 Percent of Rated Peak Reverse Voltage (%) t - Pulse Duration (s) Fig. 4 - Typical Reverse Leakage Characteristics Fig. 6 - Typical Transient Thermal Impedance PACKAGE OUTLINE DIMENSIONS in inches (millimeters) TO-220AC ITO-220AC 0.404 (10.26) 0.384 (9.75) 0.415 (10.54) MAX. 0.370 (9.40) 0.360 (9.14) 0.154 (3.91) DIA. 0.148 (3.74) DIA. 0.185 (4.70) 0.175 (4.44) 0.055 (1.39) 0.045 (1.14) 0.113 (2.87) 0.103 (2.62) 0.635 (16.13) 0.625 (15.87) 1 PIN 0.350 (8.89) 0.330 (8.38) 0.160 (4.06) 0.140 (3.56) 0.037 (0.94) 0.027 (0.68) 0.205 (5.20) 0.195 (4.95) Revision: 07-Dec-12 0.560 (14.22) 0.530 (13.46) PIN 1 0.025 (0.64) 0.015 (0.38) 0.135 (3.43) DIA. 0.122 (3.08) DIA. 7° REF. 0.350 (8.89) 0.330 (8.38) 2 0.191 (4.85) 0.171 (4.35) CASE 0.022 (0.56) 0.014 (0.36) 0.671 (17.04) 0.651 (16.54) PIN 1 0.560 (14.22) 0.530 (13.46) 7° REF. 0.140 (3.56) DIA. 0.125 (3.17) DIA. 0.600 (15.24) 0.580 (14.73) 0.110 (2.79) 0.100 (2.54) PIN 2 0.105 (2.67) 0.095 (2.41) 0.603 (15.32) 0.573 (14.55) 1.148 (29.16) 1.118 (28.40) 2 0.057 (1.45) 0.045 (1.14) 0.076 (1.93) REF. 45° REF. 0.145 (3.68) 0.135 (3.43) 0.190 (4.83) 0.170 (4.32) 0.110 (2.79) 0.100 (2.54) 0.076 (1.93) REF. 0.057 (1.45) 0.045 (1.14) 7° REF. 0.110 (2.79) 0.100 (2.54) 0.035 (0.89) 0.025 (0.64) 0.205 (5.21) 0.195 (4.95) 0.028 (0.71) 0.020 (0.51) Document Number: 88999 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000