V10PW12HM3/I

V10PW12 www.vishay.com Vishay General Semiconductor High Current Density Surface-Mount TMBS® (Trench MOS Barrier Schottky) Rectifier Ultra Low VF = 0.51 V at IF = 5 A FEATURES eSMP® Series • Very low profile - typical height of 1.3 mm Available • Trench MOS Schottky technology K • Ideal for automated placement • Low forward voltage drop, low power losses • High efficiency operation 1 • Meets MSL level 1, per LF maximum peak of 260 °C 2 • AEC-Q101 qualified available - Automotive ordering code: base P/NHM3 SlimDPAK (TO-252AE) PIN 1 PIN 2 J-STD-020, K • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 HEATSINK LINKS TO ADDITIONAL RESOURCES TYPICAL APPLICATIONS For use in low voltage high frequency DC/DC converters, freewheeling diodes, and polarity protection applications. 3D 3D 3D Models MECHANICAL DATA PRIMARY CHARACTERISTICS IF(AV) 10 A VRRM 120 V IFSM 180 A VF at IF = 10 A (TJ = 125 °C) 0.61 V TJ max. 150 °C Package SlimDPAK (TO-252AE) Circuit configuration Single Case: SlimDPAK (TO-252AE) Molding compound meets UL 94 V-0 flammability rating Base P/N-M3 - halogen-free, RoHS-compliant Base P/NHM3 - halogen-free, RoHS-compliant, and AEC-Q101 qualified Terminals: matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 M3 and HM3 suffix meets JESD 201 class 2 whisker test MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL Device marking code Maximum repetitive peak reverse voltage V10PW12 UNIT V10PW12 VRRM 120 V IF(AV) (1) 10 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 180 A Operating junction temperature range TJ (2) -40 to +150 °C Storage temperature range TSTG -55 to +150 °C Maximum average forward rectified current (Fig. 1) Notes (1) With infinite heatsink (2) The heat generated must be less than the thermal conductivity from junction to ambient: dP /dT < 1/R D J θJA Revision: 04-Mar-2021 Document Number: 98187 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V10PW12 www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TJ = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS IF = 5.0 A IF = 10 A Instantaneous forward voltage IF = 5.0 A IF = 10 A VR = 90 V Reverse current VR = 120 V Typical junction capacitance SYMBOL TJ = 25 °C VF (1) TJ = 125 °C TYP. MAX. 0.57 - 0.73 0.78 0.51 - 0.61 0.68 TJ = 25 °C 0.006 - TJ = 125 °C 5 - - 0.4 10 30 1110 - TJ = 25 °C IR (2) TJ = 125 °C 4.0 V, 1 MHz CJ UNIT V mA pF Notes (1) Pulse test: 300 μs pulse width, 1 % duty cycle (2) Pulse test: pulse width ≤ 5 ms THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL V10PW12 RθJA (1)(2) 65 RθJM (3) 2.5 Typical thermal resistance UNIT °C/W Notes (1) The heat generated must be less than thermal conductivity from junction-to-ambient: dP /dT < 1/R D J θJA (2) Free air, mounted on recommended copper pad area; thermal resistance R θJA - junction to ambient (3) Mounted on infinite heat sink; thermal resistance R θJM - junction-to-mount ORDERING INFORMATION (Example) PREFERRED P/N BASE QUANTITY DELIVERY MODE V10PW12-M3/I UNIT WEIGHT (g) PREFERRED PACKAGE CODE 0.20 I 4500 13" diameter plastic tape and reel V10PW12HM3/I (1) 0.20 I 4500 13" diameter plastic tape and reel Note AEC-Q101 qualified (1) Revision: 04-Mar-2021 Document Number: 98187 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V10PW12 www.vishay.com Vishay General Semiconductor TM measured at cathode terminal mount typical values 8 1000 1st line 2nd line 2nd line Average Forward Rectified Current (A) RthJM = 2.5 °C/W 10 6 RthJA = 65 °C/W 100 4 2 0 25 50 75 100 125 10000 10 1 0.1 TJ = 25 °C 0.01 0.001 100 TJ = -40 °C 10 10 150 20 30 40 50 60 70 80 90 100 Mount Temperature (°C) Percent of Rated Peak Reverse Voltage (%) Fig. 1 - Maximum Forward Current Derating Curve Fig. 4 - Typical Reverse Leakage Characteristics Axis Title Axis Title 8.0 10000 D = 0.8 7.0 10000 10 000 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p D = 0.3 1000 D = 0.2 5.0 4.0 D = 1.0 D = 0.1 3.0 100 T 2.0 1000 1000 100 100 1st line 2ndline line 2nd 6.0 2nd line Junction Capacitance (pF) D = 0.5 1st line 2nd line 2nd line Average Power Loss (W) 1000 TJ = 150 °C TJ = 125 °C TJ = 100 °C 0.0001 10 0 Axis Title 100 1st line 2nd line 10000 Instantaneous Reverse Current (mA) Axis Title 12 1st line 2nd line RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 1.0 D = tp/T tp 10 0 0 1 2 3 4 5 6 7 8 10 0.1 9 10 11 12 1 10 10 1000 Average Forward Current (A) Reverse Voltage (V) Fig. 2 - Forward Power Loss Characteristics Fig. 5 - Typical Junction Capacitance Axis Title Axis Title 10000 1000 10 TJ = 125 °C TJ = 100 °C 1 100 TJ = 25 °C TJ = -40 °C 10 0.1 0 0.2 0.4 0.6 0.8 1.0 1.2 10000 Junction to ambient 10 1000 1 100 1st line 2nd line TJ = 150 °C 100 2nd line Transient Thermal Impedance (°C/W) 100 2nd line Instantaneous Forward Current (A) 100 0.1 0.01 10 0.1 1 10 100 Instantaneous Forward Voltage (V) t - Pulse Duration (s) Fig. 3 - Typical Instantaneous Forward Characteristics Fig. 6 - Typical Transient Thermal Impedance Revision: 04-Mar-2021 Document Number: 98187 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V10PW12 www.vishay.com Vishay General Semiconductor Axis Title 10000 80 Epoxy printed circuit board FR4 copper thickness = 70 µm 60 1000 50 1st line 2nd line 2nd line Thermal Resistance (°C/W) 70 40 30 100 20 S (cm2) 10 10 0 0 1 2 3 4 5 6 7 8 9 10 Copper Pad Areas (cm2) Fig. 7 - Typical Resistance Junction to Ambient vs. Copper Pad Areas PACKAGE OUTLINE DIMENSIONS in inches (millimeters) SlimDPAK (TO-252AE) 0.055 (1.40) 0.047 (1.20) 0.249 (6.32) 0.239 (6.08) 0.016 (0.41) 0.010 (0.25) 0.028 (0.70) 0.012 (0.30) 0.265 (6.72) 0.255 (6.48) 0.370 (9.40) 0.339 (8.60) 0.008 0.000 0.055 0.039 0.090 NOM. (2.29) (0.20) (0.00) (1.40) (1.00) 0.180 NOM. (4.57) Mounting Pad Layout 0.240 MIN. (6.10) 0.224 (5.70) 0.209 (5.30) 0.205 NOM. (5.20) 0.235 MIN. (5.97) 0.386 REF. (9.80) 0.075 MIN. (1.90) 0.035 (0.90) 0.028 (0.70) 0.090 NOM. (2.29) 0.055 MIN. (1.40) Revision: 04-Mar-2021 Document Number: 98187 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2023 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2023 1 Document Number: 91000