V15P8
www.vishay.com
Vishay General Semiconductor
High Current Density Surface Mount
TMBS® (Trench MOS Barrier Schottky) Rectifier
Ultra Low VF = 0.36 V at IF = 5 A
FEATURES
eSMP® Series
• Very low profile - typical height of 1.1 mm
Available
• Ideal for automated placement
K
• Trench MOS Schottky technology
• Low forward voltage drop, low power losses
1
• High efficiency operation
2
• Meets MSL level 1, per
LF maximum peak of 260 °C
SMPC (TO-277A)
K
Anode 1
Cathode
Anode 2
J-STD-020,
• AEC-Q101 qualified available
- Automotive ordering code; base P/NHM3
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
TYPICAL APPLICATIONS
ADDITIONAL RESOURCES
For use in low voltage high frequency inverters,
freewheeling, DC/DC converters, and polarity protection
applications.
3D 3D
3D Models
MECHANICAL DATA
PRIMARY CHARACTERISTICS
IF(AV)
15 A
VRRM
80 V
IFSM
220 A
VF at IF = 15 A (TA = 125 °C)
0.55 V
TJ max.
150 °C
Package
SMPC (TO-277A)
Circuit configuration
Single
Case: SMPC (TO-277A)
Molding compound meets UL 94 V-0 flammability rating
Base P/N-M3 - halogen-free, RoHS-compliant, and
commercial grade
Base P/NHM3_X - halogen-free, RoHS-compliant, and
AEC-Q101 qualified
(“_X” denotes revision code e.g. A, B,.....)
Terminals: matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
M3 suffix meets JESD 201 class 2 whisker test, HM3 suffix
meets JESD 201 class 2 whisker test
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
Device marking code
Maximum repetitive peak reverse voltage
Maximum average forward rectified current (fig. 1)
Peak forward surge current 10 ms single half sine-wave
superimposed on rated load
Voltage rate of change (rated VR)
Operating junction and storage temperature range
V15P8
UNIT
V158
VRRM
80
IF (1)
15
IF (2)
4.6
IFSM
220
A
dV/dt
10 000
V/μs
TJ, TSTG
-40 to +150
°C
V
A
Notes
(1) Mounted on 30 mm x 30 mm pad areas aluminum PCB
(2) Free air, mounted on recommended copper pad area
Revision: 18-Dec-2019
Document Number: 87717
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
V15P8
www.vishay.com
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
TEST CONDITIONS
SYMBOL
IF = 5.0 A
IF = 7.5 A
TA = 25 °C
IF = 15 A
Instantaneous forward voltage
VF (1)
IF = 5.0 A
TA = 125 °C
IF = 7.5 A
IF = 15 A
TA = 25 °C
VR = 80 V
Reverse current
TA = 125 °C
IR (2)
TYP.
MAX.
0.45
-
0.49
-
0.58
0.66
0.36
-
0.42
-
0.55
0.63
-
1.2
20
50
UNIT
V
mA
Notes
(1) Pulse test: 300 μs pulse width, 1 % duty cycle
(2) Pulse test: pulse width 5 ms
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
Typical thermal resistance
SYMBOL
V15P8
RJA (1)(2)
75
RJM (3)
4
UNIT
°C/W
Notes
(1) The heat generated must be less than the thermal conductivity from junction to ambient: dP /dT < 1/R
D
J
JA
(2) Free air mounted on recommended copper pad area; thermal resistance R
JA - junction to ambient
(3) Mounted on 30 mm x 30 mm aluminum PCB; thermal resistance R
JM - junction to mount
ORDERING INFORMATION (Example)
PREFERRED P/N
V15P8-M3/86A
V15P8-M3/87A
V15P8HM3_A/H
(1)
V15P8HM3_A/I (1)
UNIT WEIGHT (g)
PREFERRED PACKAGE CODE
BASE QUANTITY
DELIVERY MODE
0.10
86A
1500
7" diameter plastic tape and reel
0.10
87A
6500
13" diameter plastic tape and reel
0.10
H
1500
7" diameter plastic tape and reel
0.10
I
6500
13" diameter plastic tape and reel
Note
(1) AEC-Q101 qualified
Revision: 18-Dec-2019
Document Number: 87717
2
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
V15P8
www.vishay.com
Vishay General Semiconductor
RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted)
Axis Title
Axis Title
100
14
12
1000
10
8
TA = 25 ƱC RthJA = 75 °C/W
6
100
4
2
TM measured at cathode
terminal mount typical values
0
0
25
50
75
125
TJ = 125 °C
10
TJ = 100 °C
1000
1
0.1
TJ = 25 °C
100
0.01
TJ = -40 °C
0.001
0.0001
10
100
10000
TJ = 150 °C
1st line
2nd line
TM = 115 ƱC RthJM = 4 °C/W
2nd line
Instantaneous Reverse Current (mA)
16
1st line
2nd line
2nd line
Average Forward Rectified Current (A)
10000
150
10
20
40
60
Percent of Rated Peak Reverse Voltage (%)
Fig. 1 - Forward Current Derating Curve
Fig. 4 - Typical Reverse Leakage Characteristics
Axis Title
Axis Title
10 000
10000
10000
D = 0.8
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
1000
D = 0.2
D = 1.0
5.0
D = 0.1
3.0
100
T
2.0
1.0
D = tp/T
4
6
8
10
12
14
100
100
10
10
2
1000
tp
0
0
1000
1st line
2nd line
D = 0.3
2nd line
Junction Capacitance (pF)
D = 0.5
7.0
1st line
2nd line
2nd line
Average Power Loss (W)
8.0
4.0
16
18
10
0.1
1
100
Reverse Voltage (V)
Fig. 2 - Forward Power Loss Characteristics
Fig. 5 - Typical Junction Capacitance
Axis Title
Axis Title
100
1000
TJ = 150 °C
TJ = 125 °C
1
TJ = 100 °C
100
TJ = 25 °C
TJ = -40 °C
0.1
10
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
10000
Junction to Ambient
1000
1st line
2nd line
10
2nd line
Transient Thermal Impedance (°C/W)
10000
2nd line
Instantaneous Forward Current (A)
10
Average Forward Current (A)
0
100
Mount Temperature (°C)
9.0
6.0
80
10
100
1
0.01
10
0.1
1
10
100
Instantaneous Forward Voltage (V)
t - Pulse Duration (s)
Fig. 3 - Typical Instantaneous Forward Characteristics
Fig. 6 - Typical Transient Thermal Impedance
Revision: 18-Dec-2019
Document Number: 87717
3
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
V15P8
www.vishay.com
Vishay General Semiconductor
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
SMPC (TO-277A)
0.187 (4.75)
0.175 (4.45)
0.016 (0.40)
0.006 (0.15)
K
0.262 (6.65)
0.250 (6.35)
0.242 (6.15)
0.238 (6.05)
2
1
0.047 (1.20)
0.039 (1.00)
0.171 (4.35)
0.167 (4.25)
0.146 (3.70)
0.134 (3.40)
Mounting Pad Layout
0.087 (2.20)
0.075 (1.90)
0.189 (4.80)
MIN.
0.189 (4.80)
0.173 (4.40)
0.186 (4.72)
MIN.
0.268
(6.80)
0.155 (3.94)
NOM.
0.030 (0.75) NOM.
0.049 (1.24)
0.037 (0.94)
0.050 (1.27)
MIN.
0.084 (2.13) NOM.
0.053 (1.35)
0.041 (1.05)
0.041
(1.04)
0.055 (1.40)
MIN.
Conform to JEDEC® TO-277A
Revision: 18-Dec-2019
Document Number: 87717
4
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2021 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 09-Jul-2021
1
Document Number: 91000