V20100R-E3/4W

New Product V20100R & VF20100R Vishay General Semiconductor Dual High-Voltage Trench MOS Barrier Schottky Rectifier Ultra Low VF = 0.54 V at IF = 5 A FEATURES TMBS ® TO-220AB • Trench MOS Schottky technology ITO-220AB • Low forward voltage drop, low power losses • High efficiency operation • Solder dip 260 °C, 40 s 2 3 1 1 V20100R 2 3 • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC VF20100R PIN 1 PIN 2 PIN 1 PIN 3 CASE PIN 3 PIN 2 TYPICAL APPLICATIONS For use in high frequency inverters, switching power supplies, freewheeling diodes, OR-ing diode, dc-to-dc converters and reverse battery protection. PRIMARY CHARACTERISTICS MECHANICAL DATA IF(AV) 2 x 10 A VRRM 100 V IFSM 120 A VF at IF = 10 A 0.65 V TJ max. 150 °C Case: TO-220AB and ITO-220AB Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix for commercial grade, meets JESD 201 class 1A whisker test Polarity: As marked Mounting Torque: 10 in-lbs maximum MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL V20100R VF20100R UNIT VRRM 100 V IF(AV) 20 10 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load per diode IFSM 120 A Isolation voltage (ITO-220AB only) from terminal to heatsink t = 1 min VAC 1500 V TJ, TSTG - 40 to + 150 °C Maximum repetitive peak reverse voltage Maximum average forward rectified current (Fig. 1) Operating junction and storage temperature range Document Number: 89062 Revision: 21-Nov-07 per device per diode www.vishay.com 1 New Product V20100R & VF20100R Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS IR = 1.0 mA Breakdown voltage Instantaneous forward voltage per diode (1) SYMBOL TYP. VBR TA = 25 °C MAX. UNIT 100 (minimum) - V 0.62 0.81 0.90 IF = 5 A IF = 10 A TA = 25 °C IF = 5 A IF = 10 A TA = 125 °C 0.54 0.65 0.72 VR = 70 V TA = 25 °C TA = 125 °C 4 4 - μA mA VR = 100 V TA = 25 °C TA = 125 °C 5.6 150 15 μA mA V VF Reverse current per diode (2) IR Notes: (1) Pulse test: 300 μs pulse width, 1 % duty cycle (2) Pulse test: 10 ms pulse width THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL V20100R VF20100R UNIT RTJC 2.8 5.0 °C/W Typical thermal resistance per diode ORDERING INFORMATION (Example) PACKAGE PREFERRED P/N UNIT WEIGHT (g) PACKAGE CODE BASE QUANTITY DELIVERY MODE TO-220AB V20100R-E3/4W 1.88 4W 50/tube Tube ITO-220AB VF20100R-E3/4W 1.75 4W 50/tube Tube RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 10 Resistive or Inductive Load V20100R 20 Average Power Loss (W) Average Forward Rectified Current (A) 25 VF20100R 15 10 5 D = 0.8 D = 0.5 8 D = 0.3 6 D = 0.2 D = 1.0 D = 0.1 4 T 2 Mounted on specific Heatsink D = tp/T tp 8 10 0 0 0 25 50 75 100 125 150 175 0 2 4 6 12 Case Temperature (°C) Average Forward Current (A) Figure 1. Maximum Forward Current Derating Curve Figure 2. Forward Power Loss Characteristics Per Diode www.vishay.com 2 Document Number: 89062 Revision: 21-Nov-07 New Product V20100R & VF20100R Vishay General Semiconductor 10 Transient Thermal Impedance (°C/W) Instantaneous Forward Current (A) 100 TA = 150 °C TA = 125 °C 10 TA = 100 °C 1 TA = 25 °C 0.2 0.4 0.6 0.8 1.0 1.2 1.4 V20100R 1 0.01 0.1 0 Junction to Case 1.6 0.1 1 10 100 Instantaneous Forward Voltage (V) t - Pulse Duration (s) Figure 3. Typical Instantaneous Forward Characteristics Per Diode Figure 6. Typical Transient Thermal Impedance Per Diode 10 Transient Thermal Impedance (°C/W) Instantaneous Reverse Current (mA) 100 TA = 150 °C 10 TA = 125 °C 1 TA = 100 °C 0.1 0.01 TA = 25 °C 0.001 10 20 30 40 50 60 70 80 90 100 Junction to Case 1 VF20100R 0.1 0.01 0.1 1 10 100 Percent of Rated Peak Reverse Voltage (%) t - Pulse Duration (s) Figure 4. Typical Reverse Characteristics Per Diode Figure 7. Typical Transient Thermal Impedance Per Diode Junction Capacitance (pF) 10000 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p 1000 100 10 0.1 1 10 100 Reverse Voltage (V) Figure 5. Typical Junction Capacitance Per Diode Document Number: 89062 Revision: 21-Nov-07 www.vishay.com 3 New Product V20100R & VF20100R Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) TO-220AB 0.415 (10.54) MAX. 0.370 (9.40) 0.360 (9.14) 0.185 (4.70) 0.175 (4.44) 0.154 (3.91) 0.148 (3.74) 0.055 (1.39) 0.045 (1.14) 0.113 (2.87) 0.103 (2.62) 0.145 (3.68) 0.135 (3.43) 1 PIN 2 0.635 (16.13) 0.625 (15.87) 3 0.160 (4.06) 0.140 (3.56) 0.603 (15.32) 0.573 (14.55) 0.350 (8.89) 0.330 (8.38) 1.148 (29.16) 1.118 (28.40) 0.110 (2.79) 0.100 (2.54) 0.057 (1.45) 0.045 (1.14) 0.560 (14.22) 0.530 (13.46) 0.105 (2.67) 0.095 (2.41) 0.035 (0.90) 0.028 (0.70) 0.104 (2.65) 0.096 (2.45) 0.022 (0.56) 0.014 (0.36) 0.205 (5.20) 0.195 (4.95) ITO-220AB 0.190 (4.83) 0.170 (4.32) 0.404 (10.26) 0.384 (9.75) 0.110 (2.79) 0.100 (2.54) 0.076 (1.93) REF. 0.076 (1.93) REF. 45° REF. 7° REF. 0.140 (3.56) DIA. 0.125 (3.17) DIA. 0.600 (15.24) 0.580 (14.73) 0.671 (17.04) 0.651 (16.54) PIN 1 2 0.135 (3.43) DIA. 0.122 (3.08) DIA. 7° REF. 0.350 (8.89) 0.330 (8.38) 3 7° REF. 0.560 (14.22) 0.530 (13.46) 0.057 (1.45) 0.045 (1.14) 0.025 (0.64) 0.015 (0.38) 0.105 (2.67) 0.095 (2.41) www.vishay.com 4 0.191 (4.85) 0.171 (4.35) 0.057 (1.45) 0.045 (1.14) 0.035 (0.89) 0.025 (0.64) 0.110 (2.79) 0.100 (2.54) 0.028 (0.71) 0.020 (0.51) 0.205 (5.21) 0.195 (4.95) Document Number: 89062 Revision: 21-Nov-07 Legal Disclaimer Notice Vishay Notice Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. Document Number: 91000 Revision: 08-Apr-05 www.vishay.com 1