V20150SHM3/4W

V20150S, VI20150S www.vishay.com Vishay General Semiconductor High-Voltage Trench MOS Barrier Schottky Rectifier Ultra Low VF = 0.55 V at IF = 5 A FEATURES TMBS ® TO-220AB • Trench MOS Schottky technology TO-262AA • Low forward voltage drop, low power losses K • High efficiency operation • Solder bath temperature 275 °C max. 10 s, per JESD 22-B106 2 3 1 1 V20150S 2 3 • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 TYPICAL APPLICATIONS VI20150S PIN 1 PIN 2 PIN 1 PIN 2 PIN 3 CASE PIN 3 K For use in high frequency DC/DC converters, switching power supplies, freewheeling diodes, OR-ing diode, and reserve battery protection. MECHANICAL DATA PRIMARY CHARACTERISTICS IF(AV) 20 A VRRM 150 V IFSM 160 A VF at IF = 20 A 0.75 V TJ max. 150 °C Package TO-220AB, TO-262AA Diode variations Single Case: TO-220AB and TO-262AA Molding compound meets UL 94 V-0 flammability rating Base P/N-M3 - halogen-free, RoHS-compliant, and commercial grade Terminals: matte tin plated leads, solderable J-STD-002 and JESD 22-B102 M3 suffix meets JESD 201 class 1A whisker test per Polarity: as marked Mounting Torque: 10 in-lbs maximum MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL V20150S VI20150S UNIT Maximum repetitive peak reverse voltage VRRM 150 V Maximum average forward rectified current (fig. 1) IF(AV) 20 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 160 A dV/dt 10 000 V/μs TJ, TSTG -55 to +150 °C Voltage rate of change (rated VR) Operating junction and storage temperature range Revision: 09-Nov-17 Document Number: 89247 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V20150S, VI20150S www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS SYMBOL IF = 5 A IF = 10 A Instantaneous forward voltage TA = 25 °C IF = 20 A VF (1) IF = 5 A TA = 125 °C IF = 10 A Reverse current VR = 150 V MAX. 0.69 - 0.84 - 1.15 1.43 0.55 - UNIT V 0.64 - 0.75 0.82 TA = 25 °C 2 - μA TA = 125 °C 2.5 - mA - 250 μA 5 25 mA IF = 20 A VR = 100 V TYP. TA = 25 °C IR (2) TA = 125 °C Notes (1) Pulse test: 300 μs pulse width, 1 % duty cycle (2) Pulse test: Pulse width  40 ms THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL Typical thermal resistance V20150S RJC VI20150S 2.0 UNIT °C/W ORDERING INFORMATION (Example) PACKAGE PREFERRED P/N UNIT WEIGHT (g) PACKAGE CODE BASE QUANTITY DELIVERY MODE TO-220AB V20150S-M3/4W 1.88 4W 50/tube Tube TO-262AA VI20150S-M3/4W 1.45 4W 50/tube Tube Revision: 09-Nov-17 Document Number: 89247 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V20150S, VI20150S www.vishay.com Vishay General Semiconductor RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 100 Resistive or Inductive Load Instantaneous Reverse Current (mA) Average Forward Rectified Current (A) 25 20 15 10 5 Mounted on Specific Heatsink 0 25 50 75 100 125 150 1 TA = 125 °C TA = 100 °C 0.1 0.01 TA = 25 °C 0.001 175 10 20 30 40 50 60 70 80 90 Case Temperature (°C) Percent of Rated Peak Reverse Voltage (%) Fig. 1 - Maximum Forward Current Derating Curve Fig. 4 - Typical Reverse Characteristics 20 100 10 Transient Thermal Impedance (°C/W) D = 0.8 D = 0.5 18 Average Power Loss (W) TA = 150 °C 0.0001 0 D = 0.3 16 D = 0.2 14 12 D = 1.0 D = 0.1 10 8 T 6 4 2 D = tp/T tp 0 2 4 6 8 10 12 14 16 18 20 Junction to Case 1 0.01 0 22 24 0.1 1 10 100 Average Forward Current (A) t - Pulse Duration (s) Fig. 2 - Forward Power Dissipation Characteristics Fig. 5 - Typical Transient Thermal Impedance 100 10 000 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p TA = 150 °C Junction Capacitance (pF) Instantaneous Forward Current (A) 10 10 TA = 125 °C TA = 100 °C 1 TA = 25 °C 0.1 1000 100 100 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 0.1 1 10 Instantaneous Forward Voltage (V) Reverse Voltage (V) Fig. 3 - Typical Instantaneous Forward Characteristics Fig. 6 - Typical Junction Capacitance 100 Revision: 09-Nov-17 Document Number: 89247 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V20150S, VI20150S www.vishay.com Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) TO-220AB 0.415 (10.54) 0.380 (9.65) 0.185 (4.70) 0.175 (4.44) 0.161 (4.08) 0.139 (3.53) 0.055 (1.39) 0.045 (1.14) 0.113 (2.87) 0.103 (2.62) 1 PIN 2 0.635 (16.13) 0.625 (15.87) 3 0.160 (4.06) 0.140 (3.56) 0.603 (15.32) 0.573 (14.55) 0.350 (8.89) 0.330 (8.38) 1.148 (29.16) 1.118 (28.40) 0.110 (2.79) 0.100 (2.54) 0.057 (1.45) 0.045 (1.14) 0.560 (14.22) 0.530 (13.46) 0.035 (0.90) 0.028 (0.70) 0.104 (2.65) 0.096 (2.45) 0.022 (0.56) 0.014 (0.36) 0.205 (5.20) 0.195 (4.95) TO-262AA 0.411 (10.45) 0.380 (9.65) 0.950 (24.13) 0.920 (23.37) 1 PIN 2 3 0.185 (4.70) 0.175 (4.44) 0.055 (1.40) 0.047 (1.19) 0.055 (1.40) 0.045 (1.14) 0.350 (8.89) 0.330 (8.38) 0.510 (12.95) 0.470 (11.94) 0.160 (4.06) 0.140 (3.56) 0.110 (2.79) 0.100 (2.54) 0.057 (1.45) 0.045 (1.14) 0.104 (2.65) 0.096 (2.45) 0.401 (10.19) 0.381 (9.68) 0.560 (14.22) 0.530 (13.46) 0.035 (0.90) 0.028 (0.70) 0.205 (5.20) 0.195 (4.95) 0.022 (0.56) 0.014 (0.35) Revision: 09-Nov-17 Document Number: 89247 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000