V20K202-M3/H

V20K202 www.vishay.com Vishay General Semiconductor High Current Density Surface-Mount (TMBS®) Trench MOS Barrier Schottky Rectifier Ultra Low VF = 0.57 V at IF = 5 A FEATURES 1 2 • Trench MOS Schottky technology 3 • Low forward voltage drop, low power losses 4 8 • High efficiency operation • Meets MSL level 1, per LF maximum peak of 260 °C 7 6 5 J-STD-020, • AEC-Q101 qualified available - Automotive ordering code: base P/NHM3 FlatPAK 5 x 6 1, 2, 3, 4 Available 5, 6, 7, 8 LINKS TO ADDITIONAL RESOURCES 3D 3D • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 TYPICAL APPLICATIONS For use in low voltage high frequency DC/DC converters, freewheeling diodes, and polarity protection applications. 3D Models MECHANICAL DATA PRIMARY CHARACTERISTICS IF(AV) 20 A VRRM 200 V IFSM 220 A VF at IF = 20 A (TJ = 125 °C) 0.72 V TJ max. 165 °C Package FlatPAK 5 x 6 Circuit configuration Single Case: FlatPAK 5 x 6 Molding compound meets UL 94 V-0 flammability rating Base P/N-M3 - halogen-free, RoHS-compliant Base P/NHM3_X - halogen-free, RoHS-compliant, and AEC-Q101 qualified (“_X” denotes revision code e.g. A, B,.....) Terminals: matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 M3 and HM3 suffix meets JESD 201 class 2 whisker test MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL Device marking code Maximum repetitive peak reverse voltage Maximum DC forward current V20K202 UNIT V2022 VRRM 200 IF(AV) (1) 20 IF(AV) (2) 3.2 Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 220 Operating junction temperature range TJ (3) -40 to +165 Storage temperature range TSTG -55 to +165 V A °C Notes (1) With infinite heatsink (2) Free air, mounted on recommended pad area (3) The heat generated must be less than the thermal conductivity from junction-to-ambient: dP /dT < 1/R D J θJA Revision: 20-Apr-2023 Document Number: 87154 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V20K202 www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TJ = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS SYMBOL IF = 5 A IF = 10 A TJ = 25 °C IF = 20 A Instantaneous forward voltage VF (1) IF = 5 A IF = 10 A TJ = 125 °C Reverse current VR = 200 V Typical junction capacitance MAX. 0.73 - 0.79 - 0.88 1.02 0.57 - 0.64 - 0.72 0.77 TJ = 25 °C 0.0006 - TJ = 125 °C 1.5 - - 0.1 IF = 20 A VR = 160 V TYP. TJ = 25 °C IR (2) TJ = 125 °C UNIT V mA 3 12 800 - pF SYMBOL TYP. MAX. UNIT RθJA (1)(2) 75 - RθJM (3) 2.5 3.5 4.0 V, 1 MHz CJ Notes (1) Pulse test: 300 μs pulse width, 1 % duty cycle (2) Pulse test: pulse width ≤ 5 ms THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Thermal resistance °C/W Notes (1) The heat generated must be less than thermal conductivity from junction to ambient: dP /dT < 1/R D J θJA (2) Free air, mounted on recommended copper pad area; thermal resistance R θJA - junction-to-ambient (3) Mounted on infinite heatsink; thermal resistance R θJM - junction-to-mount ORDERING INFORMATION (Example) PREFERRED P/N V20K202-M3/H UNIT WEIGHT (g) PREFERRED PACKAGE CODE 0.10 H BASE QUANTITY DELIVERY MODE 1500 7" diameter plastic tape and reel 13" diameter plastic tape and reel V20K202-M3/I 0.10 I 6000 V20K202HM3_A/H (1) 0.10 H 1500 7" diameter plastic tape and reel V20K202HM3_A/I (1) 0.10 I 6000 13" diameter plastic tape and reel Note AEC-Q101 qualified (1) Revision: 20-Apr-2023 Document Number: 87154 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V20K202 www.vishay.com Vishay General Semiconductor RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) Axis Title Axis Title 10000 1000 15 10 100 RthJA = 75 °C/W 5 10 0 0 10 1 1000 0.1 100 TJ = 25 °C 0.0001 TJ = -40 °C 10 0.00001 10 Mount Temperature (°C) 20 30 40 50 D = 0.8 90 100 10000 10 000 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p D = 0.2 8.0 D = 0.1 100 6.0 T 4.0 1000 1000 100 100 1st line 2nd line 1000 1st line 2nd line D = 1.0 2nd line Junction Capacitance (pF) D = 0.3 12.0 10.0 80 Axis Title 10000 D = 0.5 14.0 70 Fig. 4 - Typical Reverse Leakage Characteristics Axis Title 16.0 60 Percent of Rated Peak Reverse Voltage (%) Fig. 1 - Maximum Forward Current Derating Curve 2nd line Average Power Loss (W) TJ = 150 °C TJ = 100 °C 0.001 15 30 45 60 75 90 105 120 135 150 165 18.0 TJ = 165 °C TJ = 125 °C 0.01 1st line TM measured at cathode terminal mount typical values 2nd line Instantaneous Reverse Current (mA) RthJM = 2.5 °C/W 20 10000 100 1st line 2nd line 2nd line Average Forward Rectified Current (A) 25 2.0 D = tp/T tp 10 0 0 2 4 6 10 8 10 12 14 16 18 20 22 24 0.1 1 10 10 1000 Average Forward Current (A) Reverse Voltage (V) Fig. 2 - Forward Power Loss Characteristics Fig. 5 - Typical Junction Capacitance Axis Title Axis Title 10000 TJ = 150 °C 1000 10 TJ = 125 °C TJ = 100 °C 100 1 TJ = 25 °C TJ = -40 °C 10 0.1 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 10000 Junction to ambient 1000 1st line 2nd line TJ = 165 °C 100 2nd line Transient Thermal Impedance (°C/W) 100 2nd line Instantaneous Forward Current (A) 100 10 100 1 0.01 10 0.1 1 10 100 Instantaneous Forward Voltage (V) t - Pulse Duration (s) Fig. 3 - Typical Instantaneous Forward Characteristics Fig. 6 - Typical Transient Thermal Impedance Revision: 20-Apr-2023 Document Number: 87154 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V20K202 www.vishay.com Vishay General Semiconductor DIMENSIONS in inches (millimeters) 4 x L2 FlatPAK 5 x 6 F2 7 8 M E2 6 (d1) F2 F1 F1 3 4 TOP VIEW 2 1 0.219 (5.550) D2 BOTTOM VIEW 0.050 (1.270) 0.030 (0.750) PCB FOOTPRINT Θ A c 8x 4 x L1 2 (8 x a) 1 3 0.039 (1.000) 4 (K) (2 x d2) 0.022 (0.560) 5 0.082 (2.080) 0.259 (6.590) E E1 8xb 6xe 5 (E3) 2 x b1 6 0.191 (4.840) 7 8 0.180 (4.560) 0.030 (0.750) 0.055 (1.400) D D1 SIDE VIEW DIM. INCHES MILLIMETERS MIN. NOM. MAX. MIN. NOM. MAX. 0.035 0.039 0.043 0.89 0.99 1.09 (a) - 0.006 - - 0.15 - b 0.013 0.017 0.020 0.32 0.43 0.52 b1 0.013 0.017 0.020 0.32 0.43 0.52 c 0.008 - 0.014 0.20 - 0.35 D 0.197 0.203 0.209 5.00 5.15 5.30 D1 0.189 0.193 0.197 4.80 4.90 5.00 D2 0.154 0.161 0.169 3.90 4.10 4.30 (d1) - 0.016 - - 0.40 - A (d2) - 0.005 - - 0.125 - E 0.238 0.244 0.250 6.05 6.20 6.35 E1 0.228 0.232 0.236 5.80 5.90 6.00 E2 0.157 0.165 0.173 4.00 4.20 4.40 (E3) - 0.144 - - 3.65 - e 0.050 BSC 1.27 BSC (K) 0.039 - - 1.00 - - L1 0.019 - 0.043 0.48 - 1.10 L2 0.012 - 0.031 0.30 - 0.80 M 0.128 0.138 0.148 3.25 3.50 3.75 Θ 0° - 10° 0° - 10° Notes • Dimensioning and tolerancing per ASME Y14.5-2009 • Dimensions D1 and E1 do not include mold flash or gate burrs • Dimension (XX) means reference only Revision: 20-Apr-2023 Document Number: 87154 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2023 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2023 1 Document Number: 91000