V40DM120C-M3/I

V40DM120C www.vishay.com Vishay General Semiconductor Dual High-Voltage TMBS® (Trench MOS Barrier Schottky) Rectifier Ultra Low VF = 0.46 V at IF = 5 A FEATURES eSMP® Series SMPD (TO-263AC) • Trench MOS Schottky technology Available • Very low profile - typical height of 1.7 mm • Ideal for automated placement K • Low forward voltage drop, low power losses • High efficiency operation 1 • Meets MSL level 1, per LF maximum peak of 260 °C 2 Top View Bottom View V40DM120C J-STD-020, • AEC-Q101 qualified available: - Automotive ordering code: base P/NHM3 • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 Anode 1 K Anode 2 Cathode LINKS TO ADDITIONAL RESOURCES 3D 3D 3D Models PRIMARY CHARACTERISTICS TYPICAL APPLICATIONS For use in high frequency DC/DC converters, switching power supplies, freewheeling diodes, OR-ing diode, and reverse battery protection in commercial, inductrial, and automotive application. MECHANICAL DATA IF(AV) 2 x 20 A VRRM 120 V IFSM 250 A VF at IF = 20 A (TA = 125 °C) 0.64 V TJ max. 175 °C Package SMPD (TO-263AC) Circuit configuration Common cathode Case: SMPD (TO-263AC) Molding compound meets UL 94 V-0 flammability rating Base P/N-M3 - halogen-free, RoHS-compliant Base P/NHM3 - halogen-free, RoHS-compliant, and AEC-Q101 qualified Terminals: matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 M3 and HM3 suffix meets JESD 201 class 2 whisker test Polarity: as marked MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER Maximum repetitive peak reverse voltage Maximum average forward rectified current (fig. 1) SYMBOL V40DM120C UNIT VRRM 120 V 40 per device per diode Peak forward surge current 10 ms single half sine-wave superimposed on rated load per diode Voltage rate of change (rated VR) Operating junction and storage temperature range IF(AV) A 20 IFSM 250 A dV/dt 10 000 V/μs TJ, TSTG -40 to +175 °C Revision: 27-Mar-2020 Document Number: 89991 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V40DM120C www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS SYMBOL TYP. IF = 5 A IF = 10 A TA = 25 °C IF = 20 A Instantaneous forward voltage per diode VF (1) IF = 5 A IF = 10 A TA = 125 °C IF = 20 A VR = 90 V Reverse current per diode VR = 120 V TA = 25 °C TA = 125 °C TA = 25 °C IR (2) TA = 125 °C MAX. 0.54 - 0.64 - 0.79 0.89 0.46 - UNIT V 0.55 - 0.64 0.72 9 - μA 4.3 - mA - 500 μA 7 32 mA Notes (1) Pulse test: 300 μs pulse width, 1 % duty cycle (2) Pulse test: Pulse width ≤ 5 ms THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL per diode per device Typical thermal resistance per device V40DM120C 2.0 RθJC RθJA UNIT 1.1 (1)(2) °C/W 45 Notes (1) The heat generated must be less than the thermal conductivity from junction-to-ambient: dP /dT < 1/R D J θJA (2) Free air, without heatsink ORDERING INFORMATION (Example) PACKAGE SMPD (TO-263AC) SMPD (TO-263AC) PREFERRED P/N V40DM120C-M3/I V40DM120CHM3/I (1) UNIT WEIGHT (g) PACKAGE CODE BASE QUANTITY DELIVERY MODE 0.55 I 2000/reel 13" diameter plastic tape and reel 0.55 I 2000/reel 13" diameter plastic tape and reel Note (1) AEC-Q101 qualified Revision: 27-Mar-2020 Document Number: 89991 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V40DM120C www.vishay.com Vishay General Semiconductor 45 Instantaneous Reverse Current (mA) Average Forward Rectified Current (A) RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) RthJC = 0.8 °C/W 40 35 30 25 20 15 RthJA = 45 °C/W 10 5 0 0 25 50 75 100 125 150 100 TA = 175 °C TA = 150 °C 10 TA = 125 °C TA = 100 °C 1 0.1 0.01 TA = 25 °C 0.001 10 175 20 30 40 50 60 70 100 Case Temperature (°C) Percent of Rated Peak Reverse Voltage (%) Fig. 4 - Typical Reverse Characteristics Per Diode 10 000 16.0 D = 0.5 14.0 D = 0.3 D = 1.0 12.0 D = 0.2 10.0 D = 0.1 8.0 6.0 T 4.0 2.0 D = tp/T Junction Capacitance (pF) D = 0.8 Average Power Loss (W) 90 Fig. 1 - Forward Current Derating Curve 18.0 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p 1000 tp 100 0.0 0 2 4 6 8 0.1 10 12 14 16 18 20 22 24 1 10 100 Average Forward Current (A) Reverse Voltage (V) Fig. 2 - Forward Power Loss Characteristics Per Diode Fig. 5 - Typical Junction Capacitance Per Diode Transient Thermal Impedance (°C/W) 100 Instantaneous Forward Current (A) 80 TA = 175 °C TA = 150 °C 10 TA = 125 °C 1 TA = 100 °C TA = 25 °C 0.1 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 Instantaneous Forward Voltage (V) Fig. 3 - Typical Instantaneous Forward Characteristics Per Diode 100 Junction to Ambient 10 1 0.1 0.01 0.1 1 10 100 t - Pulse Duration (s) Fig. 6 - Typical Transient Thermal Impedance Per Device Revision: 27-Mar-2020 Document Number: 89991 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V40DM120C www.vishay.com Vishay General Semiconductor Thermal Resistance (°C/W) 50 Epoxy printed circuit board FR4 copper thickness = 70 µm 45 40 35 30 25 S(cm 2) 20 1 2 3 4 5 6 7 Copper Pad Areas 8 9 (cm 2 ) Fig. 7 - Thermal Resistance Junction-to-Ambient vs. Copper Pad Areas PACKAGE OUTLINE DIMENSIONS in inches (millimeters) SMPD (TO-263AC)    5()            WR   WR             120     Mounting Pad Layout 0,1       5()   120   5() 0,1     Revision: 27-Mar-2020 Document Number: 89991 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2023 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2023 1 Document Number: 91000