V8PL6-M3/87A

V8PL6-M3 www.vishay.com Vishay General Semiconductor High Current Density Surface Mount TMBS® (Trench MOS Barrier Schottky) Rectifier Ultra Low VF = 0.34 V at IF = 4 A FEATURES eSMP® Series • Very low profile - typical height of 1.1 mm • Ideal for automated placement K • Trench MOS Schottky technology • Low forward voltage drop, low power losses 1 • High efficiency operation 2 • Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C SMPC (TO-277A) K Anode 1 Cathode Anode 2 • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 TYPICAL APPLICATIONS ADDITIONAL RESOURCES For use in low voltage high frequency inverters, freewheeling, DC/DC converters, and polarity protection applications. 3D 3D 3D Models MECHANICAL DATA PRIMARY CHARACTERISTICS IF(AV) 8.0 A VRRM 60 V IFSM 140 A VF at IF = 8.0 A (TA = 125 °C) 0.42 V TJ max. 150 °C Package SMPC (TO-277A) Circuit configuration Single Case: SMPC (TO-277A) Molding compound meets UL 94 V-0 flammability rating Base P/N-M3 - halogen-free, RoHS-compliant, and commercial grade Terminals: matte tin plated leads, solderable J-STD-002 and JESD 22-B102 M3 suffix meets JESD 201 class 2 whisker test per MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL Device marking code Maximum repetitive peak reverse voltage Maximum average forward rectified current (fig. 1) Peak forward surge current 10 ms single half sine-wave superimposed on rated load Voltage rate of change (rated VR) Operating junction and storage temperature range V8PL6-M3 UNIT 8L6 VRRM 60 IF (1) 8.0 IF (2) 4.3 IFSM 140 A dV/dt 10 000 V/μs TJ, TSTG -40 to +150 °C V A Notes (1) Mounted on 30 mm x 30 mm pad areas aluminum PCB (2) Free air, mounted on recommended copper pad area Revision: 30-Oct-2019 Document Number: 87725 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V8PL6-M3 www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS IF = 4.0 A TA = 25 °C IF = 8.0 A Instantaneous forward voltage VF (1) IF = 4.0 A TA = 125 °C IF = 8.0 A TA = 25 °C VR = 60 V Reverse current SYMBOL TA = 125 °C IR (2) TYP. MAX. 0.43 - 0.50 0.58 0.34 - 0.42 0.52 - 2.4 21 55 UNIT V mA Notes (1) Pulse test: 300 μs pulse width, 1 % duty cycle (2) Pulse test: Pulse width  5 ms THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Typical thermal resistance SYMBOL V8PL6-M3 RJA (1) (2) 75 RJM (3) 4 UNIT °C/W Notes (1) Free air, mounted on recommended copper pad area; thermal resistance R JA - junction-to-ambient (2) The heat generated must be less than the thermal conductivity from junction-to-ambient: dP /dT < 1/R D J JA (3) Mounted on 30 mm x 30 mm Al PCB; thermal resistance R JM - junction-to-mount ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE V8PL6-M3/86A 0.10 86A 1500 7" diameter plastic tape and reel V8PL6-M3/87A 0.10 87A 6500 13" diameter plastic tape and reel 9 5 TM = 132 oC, Rth JM = 4 oC/W 8 D = 0.8 Average Power Loss (W) Average Forward Rectified Current (A) RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 7 6 5 TA = 25 oC, RthJA = 75 oC/W 4 3 2 D = 0.5 4 D = 0.3 D = 1.0 D = 0.2 3 D = 0.1 2 T 1 1 D = tp/T tp 0 0 0 25 50 75 100 125 150 Mount Temperature (°C) Fig. 1 - Maximum Forward Current Derating Curve 0 1 2 3 4 5 6 7 8 9 Average Forward Current (A) Fig. 2 - Forward Power Loss Characteristics Revision: 30-Oct-2019 Document Number: 87725 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V8PL6-M3 Vishay General Semiconductor 10 000 TA = 150 °C Junction Capacitance (pF) Instantaneous Forward Current (A) www.vishay.com 10 TA = 125 °C TA = 100 °C 1 TA = 25 °C TJ = 25°C f = 1.0 MHz Vsig = 50 mVp-p 1000 TA = -40 °C 0.1 100 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 0.1 1 Instantaneous Forward Voltage (V) Reverse Voltage (V) TA = 150 °C TA = 125 °C TA = 100 °C 1 0.1 TA = 25 °C TA = -40 °C 0.001 10 20 30 40 50 60 70 80 90 100 Percent of Rated Peak Reverse Voltage (%) Fig. 4 - Typical Reverse Leakage Characteristics Transient Thermal Impedance (°C/W) Instantaneous Reverse Current (mA) 100 0.01 100 Fig. 5 - Typical Junction Capacitance Fig. 3 - Typical Instantaneous Forward Characteristics 10 10 100 Junction to Ambient 10 1 0.01 0.1 1 10 100 t - Pulse Duration (s) Fig. 6 - Typical Transient Thermal Impedance Revision: 30-Oct-2019 Document Number: 87725 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V8PL6-M3 www.vishay.com Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) SMPC (TO-277A) 0.187 (4.75) 0.175 (4.45) 0.016 (0.40) 0.006 (0.15) K 0.262 (6.65) 0.250 (6.35) 0.242 (6.15) 0.238 (6.05) 2 1 0.047 (1.20) 0.039 (1.00) 0.171 (4.35) 0.167 (4.25) 0.146 (3.70) 0.134 (3.40) Mounting Pad Layout 0.087 (2.20) 0.075 (1.90) 0.189 (4.80) MIN. 0.189 (4.80) 0.173 (4.40) 0.186 (4.72) MIN. 0.268 (6.80) 0.155 (3.94) NOM. 0.030 (0.75) NOM. 0.049 (1.24) 0.037 (0.94) 0.050 (1.27) MIN. 0.084 (2.13) NOM. 0.053 (1.35) 0.041 (1.05) 0.041 (1.04) 0.055 (1.40) MIN. Conform to JEDEC® TO-277A Revision: 30-Oct-2019 Document Number: 87725 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000