VB20M120C-E3/8W

VB20M120C www.vishay.com Vishay General Semiconductor Dual High-Voltage Trench MOS Barrier Schottky Rectifier Ultra Low VF = 0.55 V at IF = 5 A FEATURES TMBS ® • Trench MOS Schottky technology D2PAK (TO-263AB) • Low forward voltage drop, low power losses K • High efficiency operation • Meets MSL level 1, per LF maximum peak of 245 °C 2 1 PIN 2 Available • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 VB20M120C PIN 1 J-STD-020, K TYPICAL APPLICATIONS HEATSINK DESIGN SUPPORT TOOLS For use in solar cell junction box as a bypass diode for protection, using DC forward current without reverse bias. click logo to get started MECHANICAL DATA Models Case: D2PAK (TO-263AB) Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS-compliant, commercial grade Base P/N-M3 - halogen-free, RoHS-compliant, and commercial grade Available PRIMARY CHARACTERISTICS IF(AV) 2 x 10 A VRRM 120 V IFSM 120 A VF at IF = 10 A 0.64 V TJ max. 150 °C Package D2PAK (TO-263AB) Circuit configuration Common cathode Terminals: matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 E3 and M3 suffix meets JESD 201 class 2 whisker test Polarity: as marked MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER Maximum repetitive peak reverse voltage Maximum average forward rectified current (fig. 1) per device per diode Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load per diode SYMBOL VB20M120C UNIT VRRM 120 V 20 IF(AV) 10 IFSM Voltage rate of change (rated VR) Operating junction and storage temperature range A 120 dV/dt 10 000 V/μs TJ, TSTG -40 to +150 °C ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS IF = 5 A Instantaneous forward voltage per diode IF = 10 A IF = 5 A IF = 10 A VR = 90 V Reverse current per diode VR = 120 V SYMBOL TA = 25 °C VF (1) TA = 125 °C TA = 25 °C TA = 125 °C TA = 25 °C TA = 125 °C IR (2) TYP. MAX. UNIT 0.65 - 0.82 0.91 0.55 - 0.64 0.72 3 - μA 1.5 - mA - 700 μA 4 25 mA V Notes (1) Pulse test: 300 μs pulse width, 1 % duty cycle (2) Pulse test: Pulse width  20 ms Revision: 19-Jun-2018 Document Number: 89466 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VB20M120C www.vishay.com Vishay General Semiconductor THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL VB20M120C UNIT RJC 2.8 °C/W Typical thermal resistance per diode ORDERING INFORMATION (Example) PACKAGE PREFERRED P/N TO-263AB VB20M120C-E3/4W UNIT WEIGHT (g) PACKAGE CODE BASE QUANTITY DELIVERY MODE 1.37 4W 50/tube Tube TO-263AB VB20M120C-E3/8W 1.37 8W 800/reel Tape and reel TO-263AB VB20M120C-M3/I 1.37 I 800/reel Tape and reel 100 25 Instantaneous Forward Current (A) Average Forward Rectified Current (A) RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) Resistive or Inductive Load 20 15 10 5 Mounted on Specific Heatsink 0 0 25 75 50 100 125 150 TA = 150 °C 10 TA = 125 °C TA = 100 °C 1 TA = 25 °C 0.1 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 175 Case Temperature (°C) Instantaneous Forward Voltage (V) 9.0 8.0 Average Power Loss (W) D = 0.8 D = 0.5 D = 0.3 D = 0.2 7.0 D = 0.1 6.0 D = 1.0 5.0 4.0 T 3.0 2.0 1.0 D = tp/T tp 0.0 0 1 2 3 4 5 6 7 8 9 10 11 12 Average Forward Current (A) Fig. 2 - Forward Power Loss Characteristics Per Diode Fig. 3 - Typical Instantaneous Forward Characteristics Per Diode Instantaneous Reverse Current (mA) Fig. 1 - Maximum Forward Current Derating Curve 100 10 TA = 150 °C TA = 125 °C 1 TA = 100 °C 0.1 0.01 TA = 25 °C 0.001 0.0001 20 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) Fig. 4 - Typical Reverse Characteristics Per Diode Revision: 19-Jun-2018 Document Number: 89466 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VB20M120C www.vishay.com Vishay General Semiconductor TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p 1000 100 10 0.1 1 10 10 Transient Thermal Impedance (°C/W) Junction Capacitance (pF) 10 000 Junction to Case 1 0.01 100 Reverse Voltage (V) 0.1 1 10 100 t - Pulse Duration (s) Fig. 5 - Typical Junction Capacitance Per Diode Fig. 6 - Typical Transient Thermal Impedance Per Diode PACKAGE OUTLINE DIMENSIONS in inches (millimeters) D2PAK (TO-263AB) 0.411 (10.45) 0.380 (9.65) 0.190 (4.83) 0.160 (4.06) 0.245 (6.22) MIN K 0.360 (9.14) 0.320 (8.13) 1 K 2 0.624 (15.85) 0.591(15.00) 0.055 (1.40) 0.045 (1.14) 0.42 MIN. (10.66) 0.33 (8.38) MIN. 0.055 (1.40) 0.047 (1.19) 0-0.01 (0-0.254) 0.037 (0.940) 0.027 (0.686) 0.110 (2.79) 0.090 (2.29) 0.021 (0.53) 0.014 (0.36) 0.105 (2.67) 0.095 (2.41) 0.140 (3.56) 0.110 (2.79) 0.205 (5.20) 0.195 (4.95) Mounting Pad Layout 0.670 (17.02) 0.591 (15.00) 0.15 (3.81) MIN. 0.08 MIN. (2.032) 0.105 (2.67) 0.095 (2.41) Revision: 19-Jun-2018 Document Number: 89466 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2023 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2023 1 Document Number: 91000