VBUS052CD-FAH-GS08

VBUS052CD-FAH www.vishay.com Vishay Semiconductors 2-Line BUS-Port ESD Protection - Flow Through Design FEATURES NC NC GND 6 5 4 • Compact LLP1713-7L package • Low package height < 0.6 mm • 2-line ESD protection 7 • Low leakage current IR < 0.1 μA 1 D+ 21325 2 D- 3 • Low load capacitance CD = 0.8 pF GND • Ideal for high speed data line like - HDMI, DisplayPort, eSATA - USB, 1394/firewire 21323 • ESD immunity acc. IEC 61000-4-2 ± 15 kV contact discharge ± 15 kV air discharge MARKING (example only) YXX • Soldering can be checked by standard vision inspection; no X-ray necessary 20719 • e4 - precious metal (e.g. Ag, Au, NiPd, NiPdAu) (no Sn) Dot = pin 1 marking Y = type code (see table below) XX = date code • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912     ADDITIONAL RESOURCES 3D 3D 3D Models ORDERING INFORMATION DEVICE NAME VBUS052CD-FAH ORDERING CODE TAPED UNITS PER REEL (8 mm TAPE ON 7" REEL) MINIMUM ORDER QUANTITY VBUS052CD-FAH-GS08 3000 15 000 PACKAGE DATA DEVICE NAME PACKAGE NAME VBUS052CD-FAH LLP1713-7L TYPE MOLDING COMPOUND WEIGHT FLAMMABILITY RATING CODE G 3.7 mg UL 94 V-0 MOISTURE SENSITIVITY LEVEL SOLDERING CONDITIONS MSL level 1 (according J-STD-020) Peak temperature max. 260 °C ABSOLUTE MAXIMUM RATINGS VBUS052CD-FAH PARAMETER TEST CONDITIONS SYMBOL VALUE Peak pulse current Acc. IEC 61000-4-5; tP = 8/20 μs; single shot IPPM 3.5 A Peak pulse power Acc. IEC 61000-4-5; tP = 8/20 μs; single shot PPP 63 W Contact discharge acc. IEC 61000-4-2; 10 pulses VESD ± 15 kV Air discharge acc. IEC 61000-4-2; 10 pulses VESD ± 15 kV TJ -40 to +125 °C TSTG -55 to +150 °C ESD immunity Operating temperature Storage temperature Rev. 1.7, 14-Oct-2019 Junction temperature UNIT Document Number: 81881 1 For technical questions, contact: ESDprotection@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VBUS052CD-FAH www.vishay.com Vishay Semiconductors ELECTRICAL CHARACTERISTICS VBUS052CD-FAH (pin 1 or 2 to pin 3, 4 or 7) (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITIONS/REMARKS SYMBOL MIN. TYP. MAX. UNIT Number of line which can be protected Nchannel - - 2 lines Max. reverse working voltage VRWM - - 5 V Reverse voltage at IR = 0.1 μA VR 5 - - V Reverse current at VRWM = 5 V IR - < 0.01 0.1 μA at IR = 1 mA VBR 6.9 7.9 8.7 V at IPP = 1 A VC - 10 12 V at IPP = IPPM = 3.5 A VC - 15 18 V at IF = 1 A VF - 1.9 2.4 V at IPP = IPPM = 3.5 A VF - 4 5 V at VR = 0 V; f = 1 MHz CD - 0.8 1 pF Protection paths Reverse stand-off voltage Reverse breakdown voltage Reverse clamping voltage Forward clamping voltage Capacitance APPLICATION NOTE The VBUS052CD-FAH is a two-line ESD protection device with the characteristic of a Z-diode with a high ESD immunity and a very low capacitance which makes it usable for high frequency applications like USB2.0 or HDMI. With the VBUS052CD-FAH two high speed data lines can be protected against transient voltage signals like ESD (electro static discharge). Connected to the data line (pin 1 and pin 2) and to ground (pin 3) negative transients will be clamped close below the ground level while positive transients will be clamped close above the 5 V working range. The clamping behavior of the VBUS052CD-FAH is bidirectional but asymmetrical (BiAs) and so it offers the best protection for applications running up to 5 V. Pin configuration: • Pin 3, 4 and 7 are internally shorted and have to be connected to ground • Pin 1 and 2 are the inputs for the data lines D+ and D• Pin 5 and 6 are not connected internally NC GND 6 5 4 USB/HDMI interface D+ 7 1 21325 D+ 2 D- Dmatched pair NC 6 3 5 GND 4 7 1 D+ 2 3 D - GND I/O port connector 21327 FLOW THROUGH DESIGN Modern digital transmission lines can be clocked up to 480 Mbit/s (USB2.0) or 1.65 Gbit/s (HDMI). At such high data rates the transmission lines like cables or the line traces on the PCBs have to be very homogeneous regarding their surge impedance. This requires well defined trace dimensions as trace width and distance which have to be calculated depending on the requested surge impedance (e.g. 50 ) and the PCB material and layer dimensions. Any device connected to the data lines - like ESD protection devices - have to be connected with minimal changes in these trace dimensions and distances. With the package in the so called “Flow Through Design” this is possible. The lines are running straight along the PCB while the VBUS052CD-FAH is placed on top without any vias or loops. Rev. 1.7, 14-Oct-2019 Document Number: 81881 2 For technical questions, contact: ESDprotection@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VBUS052CD-FAH www.vishay.com Vishay Semiconductors TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 100 120 % Rise time = 0.7 ns to 1 ns Discharge Current IESD 100 % 10 80 % 1 IF (mA) 60 % 53 % 0.1 40 % Pin 3 to pin 1 or 2 27 % 0.01 20 % 0.001 0.5 0% -10 0 10 20 30 40 50 60 70 80 90 100 0.6 0.7 0.8 Fig. 1 - ESD Discharge Current Wave Form acc. IEC 61000-4-2 (330 /150 pF) 0.9 1 1.1 VF (V) 21478 Time (ns) 20557 Fig. 4 - Typical Forward Current IF vs. Forward Voltage VF 9 8 µs to 100 % 100 % 8 7 80 % VR (V) 6 IPPM 60 % 20 µs to 50 % 40 % Pin 1 or 2 to pin 3 5 4 3 2 20 % 1 0% 0 10 20 30 0 0.01 40 Time (µs) 20548 Fig. 2 - 8/20 μs Peak Pulse Current Wave Form acc. IEC 61000-4-5 1.0 1 10 100 1000 10 000 IR (µA) Fig. 5 - Typical Reverse Voltage VR vs. Reverse Current IR 18 f = 1 MHz 0.9 Measured acc. IEC 61000-4-5 (8/20µs - wave form) 16 Pin 2 at 0 V 0.8 14 0.7 0.6 0.5 Pin 1 or 2 to pin 3 12 Pin 2 at 3 V VC (V) CD (pF) 0.1 21479 Pin 2 at 5 V 0.4 10 VC 8 6 0.3 0.2 4 0.1 2 Pin 3 to pin 1 or 2 0 0 0 21480 1 2 3 4 VR at Pin 1 (V) Fig. 3 - Typical Capacitance CD vs. Reverse Voltage VR Rev. 1.7, 14-Oct-2019 0 5 21481 1 2 3 4 5 IPP (A) Fig. 6 - Typical Peak Clamping Voltage VC vs. Peak Pulse Current IPP Document Number: 81881 3 For technical questions, contact: ESDprotection@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VBUS052CD-FAH www.vishay.com Vishay Semiconductors 120 Acc. IEC 61000-4-2 + 8 kV contact discharge 100 80 VC-ESD (V) 60 40 20 0 - 20 - 40 - 10 0 10 20 30 40 50 60 70 80 90 21528 t (ns) Fig. 7 - Typical Clamping Performance at + 8 kV Contact Discharge (acc. IEC 61000-4-2) 20 0 - 20 VC-ESD (V) - 40 - 60 Acc. IEC 61000-4-2 - 8 kV contact discharge - 80 - 100 - 120 - 140 - 160 - 180 - 10 0 10 20 30 40 50 60 70 80 90 t (ns) 21529 Fig. 8 - Typical Clamping Performance at - 8 kV Contact Discharge (acc. IEC 61000-4-2) 200 Positive discharge 150 100 Acc. IEC 61000-4-2 contact discharge VC-ESD (V) 50 0 - 50 VC-ESD - 100 - 150 - 200 Negative discharge - 250 - 300 0 21530 5 10 15 20 VESD (kV) Fig. 9 - Typical Peak Clamping Voltage at ESD Contact Discharge (acc. IEC 61000-4-2) Rev. 1.7, 14-Oct-2019 Document Number: 81881 4 For technical questions, contact: ESDprotection@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VBUS052CD-FAH www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters (inches): LLP1713-7L 0.5 [0.020] Bsc 0.28 [0.011] 0.4 [0.016] 0.19 [0.007] 0.25 [0.010] 0.22 [0.009] 1 [0.039] Ref. 0.05 [0.002] 0 [0.000] 1.4 [0.055] 0.6 [0.024] 1.75 [0.069] 1.65 [0.065] 0.5 [0.020] 0.152 [0.006] Ref. 1.3 [0.051] PIN 1 marking 1 [0.039] 0.25 [0.010] 0.4 [0.016] 0.15 [0.006] 0.37 [0.015] 1.651 [0.065] 0.5 [0.020] 0.22 [0.009] foot print recommendation: solder resist mask solder pad Document no.:S8-V-3906.04-008 (4) Created - Date: 15. April 2008 Rev. 3 - Date: 10.Okt.2019 21329 Rev. 1.7, 14-Oct-2019 Document Number: 81881 5 For technical questions, contact: ESDprotection@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VBUS052CD-FAH www.vishay.com Vishay Semiconductors Pin 1 - location LLP1713 Top view Rev. 1.7, 14-Oct-2019 Pad layout - view from top seen at bottom side Document Number: 81881 6 For technical questions, contact: ESDprotection@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2023 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2023 1 Document Number: 91000