VDRH14V320BKE

VDRH Series www.vishay.com Vishay BCcomponents VDR Metal Oxide Varistors High Surge FEATURES • Low β high purity zinc oxide disc • Halogen free insulating epoxy coating • Straight or kinked leads • Higher current surge/size ratio capability up to 10 kA for H20 types • Certified for operation up to 85 °C according to UL 1449 edition 4, VDE/IEC 61051-1/2 • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 LINKS TO ADDITIONAL RESOURCES APPLICATION 3D 3D 3D Models • Overvoltage and transient voltage protection Design Tools Models DESCRIPTION QUICK REFERENCE DATA PARAMETER Maximum continuous voltage in operating temperature range: RMS DC Maximum non-repetitive transient current INRP (8 x 20 μs) Maximum energy (10/1000 μs) Detailed specification Storage temperature Operating temperature VALUE UNIT 11 to 680 14 to 895 V V 250 to 10 000 A 0.7 to 620 J Based on IEC 61051-1 IEC 61051-2 IEC 61051-2-2 -40 to +150 -40 to +125 °C °C ORDERING INFORMATION The varistors are available in a number of packaging options: • Bulk • On tape on reel • On tape in ammopack (fanfold) The basic ordering code for each option is given in tables titled Varistors on Tape on Reel, Varistors on Tape in Ammopack, and Varistors in Bulk. To complete the catalog number and to determine the required operating parameters, see Electrical Data and Ordering Information table. Note • Special lead-configuration as inside or outside crimped leads on request AGENCY APPROVALS • cUL certificate • ULus certificate • VDE/IEC certificate Note • Agency approval documents, please see: www.vishay.com/ppg?29082&documents Revision: 18-Oct-2021 The varistors consist of a disc of low-ß ceramic material with two solid copper leads (H20 types only) or copper clad steel wire. The wires have a matte tin plating. They are coated with UL 94 V-0 approved ocher colored halogen-free epoxy, which provides electrical, mechanical and climatic protection. The encapsulation is resistant to all cleaning solvents in accordance with IEC 60068-2-45. MOUNTING The varistors are suitable for hand-mounting (bulk) or automatic pick and place mounting (tape on reel or fanfold). The parts can be soldered by hand or wave soldering. Pin-in-paste reflow soldering is not recommended. Bending of the leads for different angle placement is not recommended. Typical Soldering 235 °C, duration: 5 s (Pb-bearing) 245 °C, duration: 5 s (lead (Pb)-free) Resistance to Soldering Heat 260 °C, duration: 10 s max. MARKING The varistors are marked with the following information: • Maximum continuous RMS voltage with - E suffix • Series numbers - 582 for VDRH05 - 583 for VDRH07 - 584 for VDRH10 - 585 for VDRH14 - 586 for VDRH20 • Manufacture logo • Date of manufacture (YYWW) • Safety marks on VDRH10-14-20 types INFLAMMABILITY The varistors are passive non-flammable. The encapsulation is made of flame resistant epoxy in accordance with UL 94 V-0. Document Number: 29082 1 For technical questions, contact: nlr@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VDRH Series www.vishay.com Vishay BCcomponents ELECTRICAL DATA AND ORDERING INFORMATION MAXIMUM MAXIMUM NOMINAL NON-REP. MAXIMUM TYPICAL VOLTAGE MAXIMUM (3) DISCHARGE VOLTAGE T (4) ENERGY TRANSIENT CONTINUOUS AT (7) CAPACITANCE (max.) CURRENT AT 1 mA VOLTAGE AT 1 kHz STATED (10 x 1000 μs) CURRENT (5) IN CURRENT INRP (8 x 20 μs) RMS (2) (V) 11 14 17 20 25 30 35 40 50 DC (V) 14 18 22 26 31 38 45 56 65 Revision: 18-Oct-2021 (V) 18 22 27 33 39 47 56 68 82 E SAP MATERIAL AND ORDERING NUMBER (1) xy (6) V (V) I (A) (J) (A) (kA) (pF) (mm) 40 1.0 0.7 250 0.10 1600 3.4 36 2.5 1.5 500 0.15 3600 3.4 0.5 ± 0.3 VDRH07D011xyE 36 5.0 2.6 1000 0.50 8000 3.8 0.7 ± 0.3 VDRH10G011xyE (mm) 0.5 ± 0.3 VDRH05B011xyE 36 10.0 5.2 2000 1.00 20 000 3.8 0.7 ± 0.3 VDRH14M011xyE 48 1.0 0.8 250 0.10 1300 3.4 0.7 ± 0.3 VDRH05B014xyE 43 2.5 1.7 500 0.15 2800 3.4 0.7 ± 0.3 VDRH07D014xyE 43 5.0 3.2 1000 0.50 6000 3.8 0.9 ± 0.3 VDRH10G014xyE 43 10.0 6.3 2000 1.00 15 000 3.8 0.9 ± 0.3 VDRH14M014xyE 43 20.0 16.0 3000 2.00 30 000 4.2 1.1 ± 0.3 VDRH20R014ByE 60 1.0 1.1 250 0.10 1050 3.7 0.8 ± 0.3 VDRH05B017xyE 53 2.5 2.1 500 0.15 2000 3.7 0.8 ± 0.3 VDRH07D017xyE 53 5.0 3.9 1000 0.50 4000 4.1 1.0 ± 0.3 VDRH10G017xyE 1.0 ± 0.3 VDRH14M017xyE 53 10.0 7.8 2000 1.00 10 000 4.1 53 20.0 19.0 3000 2.00 20 000 4.5 1.2 ± 0.3 VDRH20R017ByE 73 1.0 1.3 250 0.10 900 3.9 1.0 ± 0.3 VDRH05B020xyE 65 2.5 2.8 500 0.15 1500 3.9 1.0 ± 0.3 VDRH07D020xyE 65 5.0 4.8 1000 0.50 3000 4.3 1.2 ± 0.3 VDRH10G020xyE 65 10.0 9.5 2000 1.00 7500 4.3 1.2 ± 0.3 VDRH14M020xyE 65 20.0 24.0 3000 2.00 15 000 4.7 1.4 ± 0.3 VDRH20R020ByE 1.2 ± 0.3 VDRH05B025xyE 86 1.0 1.5 250 0.10 500 4.2 77 2.5 3.0 500 0.15 1350 4.2 1.2 ± 0.3 VDRH07D025xyE 77 5.0 5.6 1000 0.50 2600 4.6 1.4 ± 0.3 VDRH10G025xyE 77 10.0 11.0 2000 1.00 6500 4.6 1.4 ± 0.3 VDRH14M025xyE 77 20.0 28.0 3000 2.00 13 000 5.0 1.6 ± 0.3 VDRH20R025ByE 104 1.0 1.8 250 0.10 700 4.4 1.4 ± 0.5 VDRH05B030xyE 93 2.5 3.8 500 0.15 1600 4.4 1.4 ± 0.5 VDRH07D030xyE 93 5.0 6.8 1000 0.50 2700 4.8 1.6 ± 0.5 VDRH10G030xyE 93 10.0 14.0 2000 1.00 6000 4.8 1.6 ± 0.5 VDRH14M030xyE 93 20.0 34.0 3000 2.00 12 000 5.2 1.8 ± 0.5 VDRH20R030ByE 1.7 ± 0.5 VDRH05B035xyE 123 1.0 2.2 250 0.10 560 4.8 110 2.5 4.4 500 0.15 1300 4.8 1.7 ± 0.5 VDRH07D035xyE 110 5.0 8.1 1000 0.50 2200 5.2 1.9 ± 0.5 VDRH10G035xyE 110 10.0 16.0 2000 1.00 4800 5.2 1.9 ± 0.5 VDRH14M035xyE 110 20.0 41.0 3000 2.00 9600 5.6 2.1 ± 0.5 VDRH20R035ByE 150 1.0 2.6 250 0.10 460 5.1 2.1 ± 0.5 VDRH05B040xyE 135 2.5 5.4 500 0.15 1000 5.1 2.1 ± 0.5 VDRH07D040xyE 135 5.0 9.8 1000 0.50 1800 5.5 2.3 ± 0.5 VDRH10G040xyE 135 10.0 20.0 2000 1.00 3800 5.5 2.3 ± 0.5 VDRH14M040xyE 135 20.0 49.0 3000 2.00 7600 5.9 2.5 ± 0.5 VDRH20R040ByE 145 3.5 800 0.10 370 3.5 0.6 ± 0.3 VDRH05E050xyE 0.6 ± 0.3 VDRH07K050xyE 5.0 135 10.0 7.0 1750 1.00 900 3.5 135 25.0 14.0 3500 1.50 1500 3.9 0.8 ± 0.3 VDRH10S050xyE 135 50.0 28.0 6000 3.00 3100 3.9 0.8 ± 0.3 VDRH14V050xyE Document Number: 29082 2 For technical questions, contact: nlr@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VDRH Series www.vishay.com Vishay BCcomponents ELECTRICAL DATA AND ORDERING INFORMATION MAXIMUM MAXIMUM NOMINAL NON-REP. MAXIMUM TYPICAL VOLTAGE MAXIMUM DISCHARGE VOLTAGE (3) T ENERGY (4) TRANSIENT CONTINUOUS AT (7) CAPACITANCE (max.) CURRENT AT 1 mA (5) VOLTAGE AT 1 kHz STATED (10 x 1000 μs) CURRENT IN CURRENT INRP (8 x 20 μs) RMS (2) (V) 60 75 95 DC (V) 85 100 125 (V) 100 120 150 V (V) I (A) (J) 175 150 180 170 205 150 175 195 180 200 225 250 220 240 275 300 Revision: 18-Oct-2021 (mm) (mm) 4.5 800 0.10 290 3.7 0.7 ± 0.3 VDRH05E060xyE 9.0 1750 1.00 700 3.7 0.7 ± 0.3 VDRH07K060xyE 165 25.0 18.0 3500 1.50 1200 4.1 0.9 ± 0.3 VDRH10S060xyE 0.9 ± 0.3 VDRH14V060xyE 165 50.0 36.0 6000 3.00 2300 4.1 165 100.0 72.0 10 000 5.00 4600 4.5 1.1 ± 0.3 VDRH20X060ByE 210 5.0 5.5 800 0.10 240 4.0 0.9 ± 0.3 VDRH05E075xyE 200 10.0 11.0 1750 1.00 530 4.0 0.9 ± 0.3 VDRH07K075xyE 200 25.0 22.0 3500 1.50 1000 4.4 1.1 ± 0.3 VDRH10S075xyE 200 50.0 44.0 6000 3.00 1900 4.4 1.1 ± 0.3 VDRH14V075xyE 200 100.0 88.0 10 000 5.00 3800 4.8 1.3 ± 0.3 VDRH20X075ByE 260 5.0 6.5 800 0.10 180 4.2 1.1 ± 0.3 VDRH05E095xyE 250 10.0 13.0 1750 1.00 450 4.2 1.1 ± 0.3 VDRH07K095xyE 250 25.0 25.0 3500 1.50 800 4.6 1.3 ± 0.3 VDRH10S095xyE 250 50.0 53.0 6000 3.00 1500 4.6 1.3 ± 0.3 VDRH14V095xyE 250 100.0 106.0 10 000 5.00 3000 5.0 1.5 ± 0.3 VDRH20X095ByE 5.0 8.0 800 0.10 150 3.6 0.9 ± 0.3 VDRH05E115xyE 300 10.0 16.0 1750 1.00 390 3.6 0.9 ± 0.3 VDRH07K115xyE 300 25.0 32.0 3500 1.50 680 4.0 1.1 ± 0.3 VDRH10S115xyE 300 50.0 65.0 6000 3.00 1320 4.0 1.1 ± 0.3 VDRH14V115xyE 300 100.0 130.0 10 000 5.00 2640 4.4 1.3 ± 0.3 VDRH20X115ByE 5.0 8.5 800 0.10 130 3.8 1.0 ± 0.3 VDRH05E130xyE 340 10.0 17.5 1750 1.00 320 3.8 1.0 ± 0.3 VDRH07K130xyE 340 25.0 35.0 3500 1.50 580 4.3 1.2 ± 0.3 VDRH10S130xyE 340 50.0 70.0 6000 3.00 1050 4.3 1.2 ± 0.3 VDRH14V130xyE 340 100.0 140.0 10 000 5.00 2100 4.8 1.4 ± 0.3 VDRH20X130ByE 5.0 9.0 800 0.10 120 3.9 1.0 ± 0.3 VDRH05E140xyE 360 10.0 19.0 1750 1.00 290 3.9 1.0 ± 0.3 VDRH07K140xyE 360 25.0 39.0 3500 1.50 540 4.3 1.2 ± 0.3 VDRH10S140xyE 360 50.0 78.0 6000 3.00 950 4.3 1.2 ± 0.3 VDRH14V140xyE 360 100.0 155.0 10 000 5.00 1900 4.8 1.5 ± 0.3 VDRH20X140ByE 415 5.0 10.5 800 0.10 110 4.1 1.1 ± 0.3 VDRH05E150xyE 395 10.0 21.0 1750 1.00 270 4.1 1.1 ± 0.3 VDRH07K150xyE 395 25.0 42.0 3500 1.50 490 4.3 1.3 ± 0.3 VDRH10S150xyE 395 50.0 84.0 6000 3.00 850 4.3 1.3 ± 0.3 VDRH14V150xyE 395 100.0 168.0 10 000 5.00 1700 4.8 1.5 ± 0.3 VDRH20X150ByE 475 5.0 11.0 800 0.10 90 4.1 1.3 ± 0.3 VDRH05E175xyE 455 10.0 24.0 1750 1.00 230 4.1 1.3 ± 0.3 VDRH07K175xyE 455 25.0 49.0 3500 1.50 430 4.5 1.5 ± 0.3 VDRH10S175xyE 455 50.0 99.0 6000 3.00 750 4.5 1.5 ± 0.3 VDRH14V175xyE 455 100.0 190.0 10 000 5.00 1500 4.9 1.7 ± 0.3 VDRH20X175ByE 525 5.0 12.0 800 0.10 80 4.3 1.4 ± 0.8 VDRH05E195xyE 505 10.0 26.0 1750 1.00 210 4.3 1.4 ± 0.8 VDRH07K195xyE 380 140 (pF) 5.0 355 130 (kA) SAP MATERIAL AND ORDERING NUMBER (1) xy (6) 165 10.0 320 115 (A) E 505 25.0 52.0 3500 1.50 380 4.8 1.6 ± 0.8 VDRH10S195xyE 505 50.0 105.0 6000 3.00 690 4.8 1.6 ± 0.8 VDRH14V195xyE 505 100.0 210.0 10 000 5.00 1350 5.1 1.9 ± 0.8 VDRH20X195ByE Document Number: 29082 3 For technical questions, contact: nlr@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VDRH Series www.vishay.com Vishay BCcomponents ELECTRICAL DATA AND ORDERING INFORMATION MAXIMUM MAXIMUM NOMINAL NON-REP. MAXIMUM TYPICAL VOLTAGE MAXIMUM DISCHARGE VOLTAGE (3) T ENERGY (4) TRANSIENT CONTINUOUS AT (7) CAPACITANCE (max.) CURRENT AT 1 mA (5) VOLTAGE AT 1 kHz STATED (10 x 1000 μs) CURRENT IN CURRENT INRP (8 x 20 μs) RMS (2) (V) 210 230 250 275 300 320 350 385 DC (V) 275 300 320 350 385 420 460 505 (V) 330 360 390 430 470 510 560 620 Revision: 18-Oct-2021 V (V) I (A) (J) 575 (A) (kA) (pF) (mm) E SAP MATERIAL AND ORDERING NUMBER (1) xy (6) (mm) 5.0 13.0 800 0.10 75 4.4 1.6 ± 0.8 VDRH05E210xyE 550 10.0 28.0 1750 1.00 190 4.4 1.6 ± 0.8 VDRH07K210xyE 550 25.0 58.0 3500 1.50 350 4.8 1.8 ± 0.8 VDRH10S210xyE 1.8 ± 0.8 VDRH14V210xyE 550 50.0 115.0 6000 3.00 610 4.8 550 100.0 228.0 10 000 5.00 1250 5.3 2.0 ± 0.8 VDRH20X210ByE 620 5.0 16.0 800 0.10 70 4.6 1.7 ± 0.8 VDRH05E230xyE 595 10.0 32.0 1750 1.00 170 4.6 1.7 ± 0.8 VDRH07K230xyE 595 25.0 65.0 3500 1.50 320 5.1 1.9 ± 0.8 VDRH10S230xyE 595 50.0 130.0 6000 3.00 540 5.1 1.9 ± 0.8 VDRH14V230xyE 595 100.0 255.0 10 000 5.00 1100 5.4 2.2 ± 0.8 VDRH20X230ByE 675 5.0 17.0 800 0.10 60 4.8 1.9 ± 0.8 VDRH05E250xyE 650 10.0 35.0 1750 1.00 160 4.8 1.9 ± 0.8 VDRH07K250xyE 650 25.0 70.0 3500 1.50 300 5.1 2.1 ± 0.8 VDRH10S250xyE 650 50.0 140.0 6000 3.00 480 5.1 2.1 ± 0.8 VDRH14V250xyE 650 100.0 275.0 10 000 5.00 960 5.5 2.3 ± 0.8 VDRH20X250ByE 745 5.0 20.0 800 0.10 55 4.9 2.0 ± 0.8 VDRH05E275xyE 710 10.0 40.0 1750 1.00 140 4.9 2.0 ± 0.8 VDRH07K275xyE 710 25.0 80.0 3500 1.50 270 5.3 2.2 ± 0.8 VDRH10S275xyE 710 50.0 155.0 6000 3.00 440 5.3 2.2 ± 0.8VDRH14V275xyE (8) 710 100.0 303.0 10 000 5.00 900 5.8 2.5 ± 0.8 810 VDRH20X275ByE (8) 5.0 21.0 800 0.10 50 5.1 2.2 ± 0.8 VDRH05E300xyE 775 10.0 42.0 1750 1.00 130 5.1 2.2 ± 0.8 VDRH07K300xyE 775 25.0 85.0 3500 3.00 240 5.5 2.4 ± 0.8 VDRH10S300xyE 775 50.0 175.0 6000 3.00 400 5.5 2.4 ± 0.8VDRH14V300xyE (8) 775 100.0 350.0 10 000 5.00 810 5.9 2.7 ± 0.8 880 VDRH20X300ByE (8) 5.0 22.0 800 0.10 45 5.5 2.4 ± 0.8 VDRH05E320xyE 842 10.0 45.0 1750 1.00 120 5.5 2.4 ± 0.8 VDRH07K320xyE 842 25.0 92.0 3500 3.00 220 6.0 2.6 ± 0.8 VDRH10S320xyE 842 50.0 190.0 6000 3.00 370 6.0 2.6 ± 0.8VDRH14V320xyE (8) 842 100.0 382.0 10 000 5.00 750 6.3 2.9 ± 0.8 940 VDRH20X320ByE (8) 5.0 25.0 800 0.10 42 5.8 2.7 ± 0.8 VDRH05E350xyE 920 10.0 51.0 1750 1.00 110 5.8 2.7 ± 0.8 VDRH07K350xyE 920 25.0 102.0 3500 3.00 200 6.1 2.9 ± 0.8 VDRH10S350xyE 920 50.0 205.0 6000 3.00 320 6.1 2.9 ± 0.8 VDRH14V350xyE 920 100.0 410.0 10 000 5.00 650 6.5 3.2 ± 0.8 VDRH20X350ByE 1050 5.0 27.0 800 0.10 40 6.0 3.0 ± 0.8 VDRH05E385xyE 1025 10.0 54.0 1750 1.00 95 6.0 3.0 ± 0.8 VDRH07K385xyE 1025 25.0 107.0 3500 3.00 180 6.5 3.2 ± 0.8 VDRH10S385xyE 1025 50.0 215.0 6000 3.00 280 6.5 3.2 ± 0.8 VDRH14V385xyE 1025 100.0 420.0 10 000 5.00 570 6.8 3.5 ± 0.8 VDRH20X385ByE Document Number: 29082 4 For technical questions, contact: nlr@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VDRH Series www.vishay.com Vishay BCcomponents ELECTRICAL DATA AND ORDERING INFORMATION MAXIMUM MAXIMUM NOMINAL NON-REP. MAXIMUM TYPICAL VOLTAGE MAXIMUM DISCHARGE VOLTAGE (3) T ENERGY (4) TRANSIENT CONTINUOUS AT (7) CAPACITANCE (max.) CURRENT AT 1 mA (5) VOLTAGE AT 1 kHz STATED (10 x 1000 μs) CURRENT IN CURRENT INRP (8 x 20 μs) RMS (2) (V) 420 460 485 510 550 625 680 DC (V) 560 615 640 670 745 825 895 (V) 680 750 780 820 910 1000 1100 V (V) I (A) (J) (A) (kA) (pF) (mm) E SAP MATERIAL AND ORDERING NUMBER (1) xy (6) (mm) 1150 5.0 28.0 800 0.10 35 6.3 1120 10.0 56.0 1750 1.00 85 6.3 3.2 ± 0.8 VDRH05E420xyE 3.2 ± 0.8 VDRH07K420xyE 1120 25.0 112.0 3500 3.00 165 6.7 3.4 ± 0.8 VDRH10S420xyE 3.4 ± 0.8 VDRH14V420xyE 1120 50.0 225.0 6000 3.00 250 6.7 1120 100.0 430.0 10 000 5.00 510 7.1 3.7 ± 0.8 VDRH20X420ByE 1290 5.0 29.0 800 0.10 30 6.6 3.6 ± 0.8 VDRH05E460xyE 1240 10.0 58.0 1750 1.00 75 6.6 3.6 ± 0.8 VDRH07K460xyE 1240 25.0 115.0 3500 3.00 150 7.0 3.8 ± 0.8 VDRH10S460xyE 1240 50.0 230.0 6000 3.00 225 7.0 3.8 ± 0.8 VDRH14V460xyE 1240 100.0 440.0 10 000 5.00 450 7.5 4.1 ± 0.8 VDRH20X460ByE 1290 10.0 59.0 1750 1.00 65 6.8 3.7 ± 0.8 VDRH07K485xyE 1290 25.0 116.0 3500 3.00 145 7.3 3.9 ± 0.8 VDRH10S485xyE 1290 50.0 233.0 6000 3.00 220 7.3 3.9 ± 0.8 VDRH14V485xyE 1290 100.0 450.0 10 000 5.00 400 7.6 4.2 ± 0.8 VDRH20X485ByE 1355 10.0 60.0 1750 1.00 62 7.0 3.9 ± 0.8 VDRH07K510xyE 1355 25.0 118.0 3500 3.00 135 7.5 4.1 ± 0.8 VDRH10S510xyE 1355 50.0 235.0 6000 3.00 220 7.5 4.1 ± 0.8 VDRH14V510xyE 1355 100.0 460.0 10 000 5.00 400 7.9 4.4 ± 0.8 VDRH20X510ByE 1500 25.0 127.0 3500 3.00 120 7.9 4.5 ± 0.8 VDRH10S550xyE 1500 50.0 255.0 6000 3.00 180 7.9 4.5 ± 0.8 VDRH14V550xyE 1500 100.0 510.0 10 000 5.00 320 8.3 4.9 ± 0.8 VDRH20X550ByE 1650 25.0 140.0 3500 1.50 105 8.4 5.0 ± 0.8 VDRH10S625ByE 1650 50.0 283.0 6000 3.00 165 8.4 5.0 ± 0.8 VDRH14V625ByE 1650 100.0 566.0 10 000 5.00 280 8.8 5.3 ± 0.8 VDRH20X625ByE 1815 25.0 155.0 3500 1.50 80 9.8 5.4 ± 0.8 VDRH10S680ByE 1815 50.0 310.0 6000 3.00 150 9.8 5.4 ± 0.8 VDRH14V680ByE 1815 100.0 620.0 10 000 3.00 250 10.2 5.8 ± 0.8 VDRH20X680ByE Notes (1) The products are certified according to cULus (E332800) for operation up to 85 °C or 105 °C, and VDE/IEC (40013495) for operation up to 85 °C. See Agency Approval section for certificate download (2) The sinusoidal voltage is assumed as the normal operating condition. If a non-sinusoidal voltage is present, type selection should be based on multiplying the peak voltage by a factor of 0.707 (3) The voltage measured at 1 mA meets the requirements of IEC 61051. The tolerance on the voltage at 1 mA is ± 10 % (4) High energy surges are generally of longer duration. The maximum energy for one pulse of 10 x 1000 μs is given as a reference for longer duration pulses. This pulse can be characterized by peak current (Ip) and pulse width t2 (virtual time of half Ip value, following “IEC 60060-2, section 6“). If Vp is the clamping voltage corresponding to Ip, the energy absorbed in the varistor is determined by the formula: E = K x V p x I p x t 2 where K is dependent on the value of t2 (see Peak Current as a Function of Pulse Width drawing) (5) A current wave of 8 x 20 μs is used as a standard for pulse current and clamping voltage ratings. The maximum non-repetitive transient current is given for one pulse applied during the life of the component (6) For composition of the SAP part number: Replace “x” by B for bulk type Replace “y” by S for straight leads T for tape and reel K for kinked leads (bulk only) A for tape and ammopack L for kinked leads with H0 = 16 mm (tape and reel/ammo) M for kinked leads with H0 = 18.25 mm (tape and reel/ammo) (7) All varistors are UL 1449 edition 4 recognized as SPD type 5 (component level) for operating temperatures up to 85 °C. The varistors may be used in other SPD types as 2, 3, or 4 depending on the indicated IN nominal discharge current ratings. The final acceptance of the component is dependent upon its installation and use in complete equipment submitted to underwriters laboratories Inc. (8) These varistors are UL 1449 edition 4 recognized as SPD type 5 (component level) for operating temperatures up to 105 °C Revision: 18-Oct-2021 Document Number: 29082 5 For technical questions, contact: nlr@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VDRH Series www.vishay.com Vishay BCcomponents ELECTRICAL CHARACTERISTICS ELECTRICAL DATA PARAMETER Maximum continuous voltage: RMS DC Maximum non-repetitive transient current (INRP) (8 x 20 μs) VDRH05 VDRH07 VDRH10 VDRH14 VDRH20 Thermal resistance: VDRH05 VDRH07 VDRH10 VDRH14 VDRH20 Maximum dissipation: VDRH05 VDRH07 VDRH10 VDRH14 VDRH20 Temperature coefficient of voltage at 1 mA maximum Voltage proof between interconnected leads and case Storage temperature Operating temperature DERATING CURVE VALUE UNIT 11 to 680 14 to 895 V V 250 or 800 500 or 1750 1000 or 3500 2000 or 6000 3000 or 10 000 A A A A A ≈ 80 ≈ 70 ≈ 60 ≈ 50 ≈ 40 K/W K/W K/W K/W K/W 100 250 400 600 1000 ± 0.05 2 500 -40 to +150 -40 to +125 mW mW mW mW mW %/K V °C °C PEAK CURRENT AS A FUNCTION OF PULSE WIDTH Maximum Voltage Maximum Dissipation Maximum Energy Maximum Transient Current Ip (%) t2 (µs) K 100 90 20 50 100 1000 1 1.2 1.3 1.4 100 % 50 10 0 0 - 40 125 Tamb (°C) 150 t (µs) t1 t2 COMPONENT DIMENSIONS (BULK TYPE) in millimeters AND CATALOG NUMBERS D MAX. A MAX. A0 MAX. V ≤ 320 V V > 320 V V ≤ 300 V V > 300 V V ≤ 320 V V > 320 V L MIN. T (1) MAX. E (1) d F CATALOG NUMBER 7.0 9.0 11.0 24.0 6.5 0.7 to 3.6 0.6 ± 0.05 5 ± 1.0 VDRH05 9.0 11.0 13.0 24.0 6.5 0.7 to 3.6 0.6 ± 0.05 5 ± 1.0 VDRH07 12.0 12.5 16.0 16.5 22.5 23.0 14.5 15.0 16.5 17.0 17.0 8.0 0.9 to 4.5 0.8 ± 0.05 7.5 ± 1.0 VDRH10 19.0 21.0 21.5 16.0 8.0 0.9 to 4.5 0.8 ± 0.05 7.5 ± 1.0 VDRH14 25.5 27.5 28.0 24.0 10.0 1.1 to 5.8 1.0 ± 0.05 10 ± 1.0 VDRH20 Note (1) T max. and E values per size and voltage level can be found back in the Electrical Data and Ordering Information table Revision: 18-Oct-2021 Document Number: 29082 6 For technical questions, contact: nlr@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VDRH Series www.vishay.com Vishay BCcomponents VARISTORS IN BULK VDRH05.... Ø 5 mm 11 V to 460 V VDRH07.... Ø 7 mm 11 V to 510 V VDRH10.... Ø 10 mm 11 V to 680 V VDRH14.... Ø 14 mm 11 V to 680 V VDRH20.... Ø 20 mm 11 V to 680 V Straight leads; see outline of components with straight leads drawing BSE BSE BSE BSE BSE Kinked leads; see outline of components with kinked leads drawing BKE BKE BKE BKE BKE 11 V to 95 V 250 250 250 100 50 130 V to 385 V 250 250 250 100 50 420 V to 460 V 250 250 200 100 50 485 V to max. V - 250 150 100 50 TYPE Packaging quantities DIMENSIONS in millimeters: see Component Dimensions and Electrical Data table OUTLINE of Component with Straight Leads D OUTLINE of Component with Kinked Leads D T T A A0 d L F L F Revision: 18-Oct-2021 E d Document Number: 29082 7 For technical questions, contact: nlr@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VDRH Series www.vishay.com Vishay BCcomponents VARISTORS ON TAPE IN AMMOPACK VDRH05.... Ø 5 mm 11 V to 460 V VDRH07.... Ø 7 mm 11 V to 510 V VDRH10.... Ø 10 mm 11 V to 680 V VDRH14.... Ø 14 mm 11 V to 680 V H = 18 mm - - ASE ASE H = 20 mm ASE ASE - - H0 = 18.25 mm AME AME AME AME H0 = 16 mm ALE ALE ALE ALE 14 V to 210 V 1500 (1) 1500 (1) 500 500 230 V to 510 V 1000 1000 500 500 550 V to max. V - - 400 400 TYPE Straight leads See drawing: taped version with straight leads Kinked leads See drawing: taped version with kinked leads Packaging quantities Note (1) Except for 35 V and 40 V = 1000 pieces DIMENSIONS OF AMMOPACK in millimeters 340 max. 52 or 55 max. 250 max. Revision: 18-Oct-2021 Document Number: 29082 8 For technical questions, contact: nlr@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VDRH Series www.vishay.com Vishay BCcomponents VARISTORS ON TAPE AND REEL VDRH05.... Ø 5 mm 11 V to 460 V TYPE VDRH07.... Ø 7 mm 11 V to 510 V VDRH10.... Ø 10 mm 11 V to 680 V VDRH14.... Ø 14 mm 11 V to 680 V Straight leads H = 18 mm - - TSE TSE H = 20 mm TSE TSE - - H0 = 18.25 mm TME TME TME TME H0 = 16 mm TLE TLE TLE TLE See drawing: taped version with straight leads Kinked leads See drawing: taped version with kinked leads Packaging quantities 14 V to 250 V 1500 1500 1000 750 275 V to 300 V 1500 1500 750 750 320 V to 350 V 1000 1000 500 500 385 V to max. V 1000 1000 500 500 PACKAGING TAPED VERSION WITH STRAIGHT LEADS (only for VDRH05 and VDRH07) P D T Δp Δp Δh Δh A d W2 F L H W0 W1 W P0 P1 D0 T1 t TAPED VERSION WITH STRAIGHT LEADS (only for VDRH10 and VDRH14) P T Δp D Δp Δh Δh A d W2 H W0 W1 W F P1 P0 D0 T1 Revision: 18-Oct-2021 t Document Number: 29082 9 For technical questions, contact: nlr@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VDRH Series www.vishay.com Vishay BCcomponents TAPED VERSION WITH KINKED LEADS (only for VDRH05 and VDRH07) TAPED VERSION WITH KINKED LEADS (only for VDRH10 and VDRH14) P P D Δp Δp Δh T T Δp D Δp Δh Δh A A d d W2 F Δh W2 H0 L W0 W1 W H 0 P0 P1 W0 W1 W F D0 T1 P1 P0 D0 T1 t t TAPING DATA (based on IEC 60286-2) SYMBOL A max. A0 max. D max. PARAMETER Max. mounting height Max. mounting height Max. body diameter V ≤ 300 V DIMENSIONS/TOLERANCE VDRH05 VDRH07 9.0 11.0 V > 320 V V ≤ 320 V V > 320 V VDRH14 14.5 V > 300 V V ≤ 320 V VDRH10 19.0 15.0 11.0 13.0 7.0 9.0 16.5 21.0 17.0 21.5 12.0 16.0 12.5 16.5 d Lead wire diameter 0.6 ± 0.05 0.8 ± 0.05 F Lead to lead distance (1) 5.0 + 0.8/- 0.2 7.5 ± 0.8 H Distance component to tape center (2) 20.0 + 2.0/- 0.0 18.0 + 2.0/- 0.0 H0 Lead wire clinch height P Pitch of components on tape T Total thickness 16.0 or 18.25 ± 0.5 12.7 ± 1.0 25.4 ± 1.0 See Electrical Data table Notes (1) Guaranteed between component and tape (2) For VDRH14V510xSE and VDRH14V550xSE: H = 20 mm ± 1 mm Revision: 18-Oct-2021 Document Number: 29082 10 For technical questions, contact: nlr@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VDRH Series www.vishay.com Vishay BCcomponents V/I CHARACTERISTICS 11 VRMS to 40 VRMS; VDRH05 Max. leakage current Max. clamping voltage VOLTAGE (V) 1000 040 035 030 025 020 017 014 011 100 10 0.00001 0.0001 0.001 0.01 0.1 1 10 100 1000 CURRENT (A) 50 VRMS to 195 VRMS; VDRH05 Max. leakage current Max. clamping voltage VOLTAGE (V) 1000 195 175 150 140 130 115 095 075 060 050 100 10 0.00001 0.0001 0.001 0.01 0.1 1 10 100 1000 CURRENT (A) Revision: 18-Oct-2021 Document Number: 29082 11 For technical questions, contact: nlr@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VDRH Series www.vishay.com Vishay BCcomponents 210 VRMS to 460 VRMS; VDRH05 Max. leakage current Max. clamping voltage 460 420 385 350 320 300 275 250 230 210 VOLTAGE (V) 1000 100 0.00001 0.0001 0.001 0.01 0.1 1 10 100 1000 CURRENT (A) 11 VRMS to 40 VRMS; VDRH07 Max. leakage current Max. clamping voltage VOLTAGE (V) 1000 040 035 030 025 020 017 014 011 100 10 0.00001 0.0001 0.001 0.01 0.1 1 10 100 1000 CURRENT (A) Revision: 18-Oct-2021 Document Number: 29082 12 For technical questions, contact: nlr@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VDRH Series www.vishay.com Vishay BCcomponents 50 VRMS to 210 VRMS; VDRH07 Max. leakage current Max. clamping voltage 210 195 175 150 140 130 115 095 075 060 050 VOLTAGE (V) 1000 100 10 0.00001 0.0001 0.001 0.01 0.1 1 10 100 1000 CURRENT (A) 230 VRMS to 510 VRMS; VDRH07 Max. leakage current Max. clamping voltage 510 485 460 420 385 350 320 300 275 250 230 VOLTAGE (V) 1000 100 0.00001 0.0001 0.001 0.01 0.1 1 10 100 1000 CURRENT (A) Revision: 18-Oct-2021 Document Number: 29082 13 For technical questions, contact: nlr@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VDRH Series www.vishay.com Vishay BCcomponents 11 VRMS to 40 VRMS; VDRH10 Max. leakage current Max. clamping voltage VOLTAGE (V) 1000 040 035 030 025 020 017 014 011 100 10 0.00001 0.0001 0.001 0.01 0.1 1 10 100 1000 CURRENT (A) 50 VRMS to 210 VRMS; VDRH10 Max. leakage current Max. clamping voltage 210 195 175 150 140 130 115 095 075 060 050 VOLTAGE (V) 1000 100 10 0.00001 0.0001 0.001 0.01 0.1 1 10 100 1000 10 000 CURRENT (A) Revision: 18-Oct-2021 Document Number: 29082 14 For technical questions, contact: nlr@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VDRH Series www.vishay.com Vishay BCcomponents 230 VRMS to 680 VRMS; VDRH10 Max. leakage current Max. clamping voltage 680 625 550 510 485 460 420 385 350 320 300 275 250 230 VOLTAGE (V) 1000 100 0.00001 0.0001 0.001 0.01 0.1 1 10 100 1000 10000 CURRENT (A) 11 VRMS to 40 VRMS; VDRH14 Max. leakage current Max. clamping voltage VOLTAGE (V) 1000 040 035 030 025 020 017 014 011 100 10 0.00001 0.0001 0.001 0.01 0.1 1 10 100 1000 CURRENT (A) Revision: 18-Oct-2021 Document Number: 29082 15 For technical questions, contact: nlr@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VDRH Series www.vishay.com Vishay BCcomponents 50 VRMS to 210 VRMS; VDRH14 Max. leakage current Max. clamping voltage 210 195 175 150 140 130 115 095 075 060 050 VOLTAGE (V) 1000 100 10 0.00001 0.0001 0.001 0.01 0.1 1 10 100 1000 10 000 CURRENT (A) 230 VRMS to 680 VRMS; VDRH14 Max. leakage current Max. clamping voltage 680 625 550 510 485 460 420 385 350 320 300 275 250 230 VOLTAGE (V) 1000 100 0.00001 0.0001 0.001 0.01 0.1 1 10 100 1000 10 000 CURRENT (A) Revision: 18-Oct-2021 Document Number: 29082 16 For technical questions, contact: nlr@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VDRH Series www.vishay.com Vishay BCcomponents 14 VRMS to 40 VRMS; VDRH20 Max. leakage current Max. clamping voltage VOLTAGE (V) 1000 040 035 030 025 020 017 014 100 10 0.00001 0.0001 0.001 0.01 0.1 1 10 100 1000 CURRENT (A) 60 VRMS to 210 VRMS; VDRH20 Max. leakage current Max. clamping voltage 210 195 175 150 140 130 115 095 075 060 VOLTAGE (V) 1000 100 10 0.00001 0.0001 0.001 0.01 0.1 1 10 100 1000 10 000 CURRENT (A) Revision: 18-Oct-2021 Document Number: 29082 17 For technical questions, contact: nlr@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VDRH Series www.vishay.com Vishay BCcomponents 230 VRMS to 680 VRMS; VDRH20 Max. leakage current Max. clamping voltage 680 625 550 510 485 460 420 385 350 320 300 275 250 230 VOLTAGE (V) 1000 100 0.00001 0.0001 0.001 0.01 0.1 1 10 100 1000 10 000 CURRENT (A) MAXIMUM APPLICABLE TRANSIENT CURRENT AS A FUNCTION OF PULSE DURATION 11 VRMS to 40 VRMS; VDRH05 Ipulse max. [A] 1000 1 pulse 2 100 10 10² 10³ 104 105 106 10 1 0.1 10 100 1000 10000 tpulse _∏_ [μs] Revision: 18-Oct-2021 Document Number: 29082 18 For technical questions, contact: nlr@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VDRH Series www.vishay.com Vishay BCcomponents 50 VRMS to 460 VRMS; VDRH05 Ipulse max. [A] 1000 1 pulse 2 10 10² 100 10³ 104 105 106 10 1 0.1 10 100 1000 10000 1000 10000 tpulse _∏_ [μs] 11 VRMS to 40 VRMS; VDRH07 Ipulse max. [A] 1000 1 pulse 2 100 10 10² 10³ 104 105 106 10 1 0.1 10 100 tpulse _∏_ [μs] Revision: 18-Oct-2021 Document Number: 29082 19 For technical questions, contact: nlr@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VDRH Series www.vishay.com Vishay BCcomponents 50 VRMS to 510 VRMS; VDRH07 Ipulse max. [A] 10000 1 pulse 2 10 10² 10³ 104 105 106 1000 100 10 1 10 100 1000 10000 1000 10000 tpulse _∏_ [μs] 11 VRMS to 40 VRMS; VDRH10 Ipulse max. [A] 1 pulse 2 1000 10 10² 10³ 104 105 106 100 10 1 0.1 10 100 tpulse _∏_ [μs] Revision: 18-Oct-2021 Document Number: 29082 20 For technical questions, contact: nlr@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VDRH Series www.vishay.com Vishay BCcomponents 50 VRMS to 300 VRMS; VDRH10 Ipulse max. [A] 10000 1 pulse 2 1000 10 10² 10³ 104 105 106 100 10 1 10 100 1000 10000 1000 10000 tpulse _∏_ [μs] 320 VRMS to 680 VRMS; VDRH10 Ipulse max. [A] 10000 1 pulse 2 1000 10 10² 10³ 104 105 106 100 10 1 10 100 tpulse _∏_ [μs] Revision: 18-Oct-2021 Document Number: 29082 21 For technical questions, contact: nlr@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VDRH Series www.vishay.com Vishay BCcomponents 11 VRMS to 40 VRMS; VDRH14 Ipulse max. [A] 10000 1 pulse 2 1000 10 10² 10³ 104 105 106 100 10 1 10 100 1000 10000 1000 10000 tpulse _∏_ [μs] 50 VRMS to 300 VRMS; VDRH14 Ipulse max. [A] 10000 1 pulse 2 10 1000 10² 10³ 104 105 106 100 10 1 10 100 tpulse _∏_ [μs] Revision: 18-Oct-2021 Document Number: 29082 22 For technical questions, contact: nlr@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VDRH Series www.vishay.com Vishay BCcomponents 320 VRMS to 680 VRMS; VDRH14 Ipulse max. [A] 10000 1 pulse 2 10 1000 10² 10³ 104 105 106 100 10 1 10 100 1000 10000 1000 10000 tpulse _∏_ [μs] 14 VRMS to 40 VRMS; VDRH20 Ipulse max. [A] 10000 1 pulse 2 10 10² 10³ 1000 104 105 100 106 10 1 10 100 tpulse _∏_ [μs] Revision: 18-Oct-2021 Document Number: 29082 23 For technical questions, contact: nlr@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VDRH Series www.vishay.com Vishay BCcomponents 60 VRMS to 300 VRMS; VDRH20 Ipulse max. [A] 1 pulse 2 10000 10 10² 1000 10³ 104 105 106 100 10 1 10 100 1000 10000 1000 10000 tpulse _∏_ [μs] 320 VRMS to 680 VRMS; VDRH20 Ipulse max. [A] 1 pulse 2 10000 10 1000 10² 10³ 104 105 106 100 10 1 10 100 tpulse _∏_ [μs] Revision: 18-Oct-2021 Document Number: 29082 24 For technical questions, contact: nlr@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000