VEMD10940F

VEMD10940F www.vishay.com Vishay Semiconductors Silicon PIN Photodiode FEATURES • Package type: Surface mount • Package form: Side view • Dimensions (L x W x H in mm): 3 x 2 x 1 • High radiant sensitivity • Daylight blocking filter matched with 830 nm to 950 nm IR emitters • Fast response times • Angle of half sensitivity:  = ± 75° • Package matched with IR emitter VSMB10940 and VSMG10850 • Floor life: 168 h, MSL 3, according to J-STD-020 DESCRIPTION • Lead (Pb)-free reflow soldering VEMD10940F is a high speed and high sensitive PIN photodiode in a miniature side looking, surface mount package (SMD) with daylight blocking filter. Filter is matched with IR emitters operating at wavelength of 830 nm to 950 nm. The photo sensitive area of the chip is 0.23 mm2. • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS • High speed photo detector • Infrared remote control • Infrared data transmission • Photo interrupters • IR touch panels PRODUCT SUMMARY COMPONENT Ira (μA)  (deg) 0.5 (nm) VEMD10940F 3 ± 75 780 to 1050 Note • Test conditions see table “Basic Characteristics” ORDERING INFORMATION ORDERING CODE PACKAGING REMARKS PACKAGE FORM VEMD10940F Tape and reel MOQ: 3000 pcs, 3000 pcs/reel Side view Note • MOQ: minimum order quantity ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION Reverse voltage Power dissipation Tamb 25 °C Junction temperature Operating temperature range Storage temperature range Soldering temperature Thermal resistance junction/ambient Rev. 1.1, 27-Mar-13 SYMBOL VALUE VR 60 UNIT V PV 104 mW Tj 100 °C Tamb - 40 to + 100 °C Tstg - 40 to + 100 °C Acc. reflow solder profile fig. 7 Tsd 260 °C Acc. J-STD-051 RthJA 450 K/W Document Number: 84171 1 For technical questions, contact: detectortechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VEMD10940F www.vishay.com Vishay Semiconductors BASIC CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL IF = 50 mA VF IR = 100 μA, E = 0 V(BR) VR = 10 V, E = 0 Iro Forward voltage Breakdown voltage Reverse dark current TYP. MAX. UNIT 1 V 32 V 1 10 nA VR = 0 V, f = 1 MHz, E = 0 CD 4 VR = 5 V, f = 1 MHz, E = 0 CD 1.3 pF Ee = 1 mW/cm2,  = 950 nm Vo 350 mV mV/K Diode capacitance Open circuit voltage MIN. pF Temperature coefficient of Vo Ee = 1 mW/cm2,  = 950 nm TKVo - 2.6 Short circuit current Ee = 1 mW/cm2,  = 950 nm Ik 3 μA Temperature coefficient of Ik Ee = 1 mW/cm2,  = 950 nm TKIk 0.1 %/K Ee = 1 mW/cm2,  = 950 nm, VR = 5 V Ira Reverse light current 2 3  Angle of half sensitivity 4 μA ± 75 deg Wavelength of peak sensitivity p 920 nm Range of spectral bandwidth 0.5 780 to 1050 nm Rise time VR = 10 V, RL = 1 k,  = 820 nm tr 100 ns Fall time VR = 10 V, RL = 1 k,  = 820 nm tf 100 ns BASIC CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 100 Ira - Reverse Light Current (µA) Iro - Reverse Dark Current (nA) 1000 100 10 VR = 10 V 1 20 94 8427 40 60 1 0.1 1 10 Ee - Irradiance (mW/cm2) Tamb - Ambient Temperature (°C) Fig. 1 - Reverse Dark Current vs. Ambient Temperature Fig. 3 - Reverse Light Current vs. Irradiance 8 1.4 CD - Diode Capacitance (pF) Ira, rel - Relative Reverse Light Current 10 0.1 0.01 100 80 VR = 5 V λ = 950 nm VR = 5 V λ = 950 nm 1.2 1.0 0.8 6 E=0 f = 1 MHz 4 2 0 0.6 0 94 8416 20 40 60 80 100 Tamb - Ambient Temperature (°C) Fig. 2 - Relative Reverse Light Current vs. Ambient Temperature Rev. 1.1, 27-Mar-13 0.1 94 8430 1 10 100 VR- Reverse Voltage (V) Fig. 4 - Diode Capacitance vs. Reverse Voltage Document Number: 84171 2 For technical questions, contact: detectortechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VEMD10940F www.vishay.com Vishay Semiconductors 0° 20° 80 70 60 50 40 30 20 10 700 800 900 1000 vertical horizontal 40° 1.0 0.9 50° 0.8 60° 70° 0.7 1100 ϕ - Angular Displacement 90 0 600 10° 30° Ie, rel - Relative Radiant Sensitivity S (λ)rel - Relative Spectral Sensitivity 100 80° 0.6 0.4 0.2 0 λ - Wavelength (nm) Fig. 5 - Relative Spectral Sensitivity vs. Wavelength REFLOW SOLDER PROFILE Fig. 6 - Relative Radiant Sensitivity vs. Angular Displacement DRYPACK Devices are packed in moisture barrier bags (MBB) to prevent the products from moisture absorption during transportation and storage. Each bag contains a desiccant. FLOOR LIFE Floor life (time between soldering and removing from MBB) must not exceed the time indicated on MBB label: Floor life: 168 h Conditions: Tamb < 30 °C, RH < 60 % Moisture sensitivity level 3, acc. to J-STD-020. DRYING Fig. 7 - Lead (Pb)-free Reflow Solder Profile acc. J-STD-020D Rev. 1.1, 27-Mar-13 In case of moisture absorption devices should be baked before soldering. Conditions see J-STD-020 or label. Devices taped on reel dry using recommended conditions 192 h at 40 °C (+ 5 °C), RH < 5 %. Document Number: 84171 3 For technical questions, contact: detectortechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VEMD10940F www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters: VEMD10940F Recommended Solder Pad Footprint 22701 Rev. 1.1, 27-Mar-13 Document Number: 84171 4 For technical questions, contact: detectortechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VEMD10940F www.vishay.com Vishay Semiconductors TAPING AND REEL DIMENSIONS in millimeters: VEMD10940F 22667 22668 Rev. 1.1, 27-Mar-13 Document Number: 84171 5 For technical questions, contact: detectortechsupport@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000