VT5200-E3, VFT5200-E3, VBT5200-E3, VIT5200-E3
www.vishay.com
Vishay General Semiconductor
Trench MOS Barrier Schottky Rectifier
Ultra Low VF = 0.58 V at IF = 2.5 A
FEATURES
TMBS
TO-220AC
®
• Trench MOS Schottky technology
ITO-220AC
• Low forward voltage drop, low power losses
• High efficiency operation
• Meets MSL level 1, per J-STD-020, LF maximum
peak of 245 °C (for TO-263AB package)
2
2
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
1
1
VT5200
• Solder dip 275 °C max. 10 s, per JESD 22-B106
(for TO-220AC, ITO-220AC and TO-262AA package)
VFT5200
PIN 1
PIN 1
CASE
PIN 2
TYPICAL APPLICATIONS
PIN 2
TO-263AB
For use in high frequency converters, switching power
supplies, freewheeling diodes, OR-ing diode, DC/DC
converters and reverse battery protection.
TO-262AA
K
K
MECHANICAL DATA
Case: TO-220AC, ITO-220AC, TO-263AB and TO-262AA
Molding compound meets UL 94 V-0 flammability rating
Base P/N-E3 - RoHS compliant, commercial grade
A
A
NC
K
NC
VBT5200
NC
K
A
Terminals: Matte tin plated leads, solderable
J-STD-002 and JESD 22-B102
E3 suffix meets JESD 201 class 1A whisker test
VIT5200
K
NC
HEATSINK
HEATSINK
A
Polarity: As marked
Mounting Torque: 10 in-lbs max.
PRIMARY CHARACTERISTICS
IF(AV)
5.0 A
VRRM
200 V
IFSM
80 A
VF at IF = 5.0 A
0.65 V
TJ max.
150 °C
Package
TO-220AC, ITO-220AC,
TO-263AB, TO-262AA
Diode variation
Single
per
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
VT5200
VFT5200
VBT5200
VIT5200
UNIT
Max. repetitive peak reverse voltage
VRRM
200
V
Max. average forward rectified current (fig. 1)
IF(AV)
5.0
A
Peak forward surge current 8.3 ms single half sine-wave
superimposed on rated load
IFSM
80
A
Non-repetitive avalanche energy at TJ = 25 °C, L = 60 mH
EAS
30
mJ
Peak repetitive reverse current
at tp = 2 μs, 1 kHz, TJ = 38 °C ± 2 °C
IRRM
0.5
A
Voltage rate of change (rated VR)
dV/dt
10 000
V/μs
VAC
1500
V
TJ, TSTG
-40 to +150
°C
Isolation voltage (ITO-220AC only)
from terminal to heatsink t = 1 min
Operating junction and storage temperature range
Revision: 27-Feb-18
Document Number: 89176
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VT5200-E3, VFT5200-E3, VBT5200-E3, VIT5200-E3
www.vishay.com
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
TEST CONDITIONS
IR = 1.0 mA
Breakdown voltage
IF = 2.5 A
Instantaneous forward voltage
IF = 5.0 A
IF = 2.5 A
IF = 5.0 A
VR = 180 V
Reverse current
VR = 200 V
SYMBOL
TYP.
MAX.
UNIT
VBR
200 (min.)
-
V
0.81
-
1.10
1.60
0.58
-
0.65
0.73
TA = 25 °C
1.7
-
μA
TA = 125 °C
1.8
-
mA
TA = 25 °C
TA = 25 °C
VF (1)
TA = 125 °C
TA = 25 °C
IR (2)
TA = 125 °C
V
-
150
μA
2.5
10
mA
Notes
(1) Pulse test: 300 μs pulse width, 1 % duty cycle
(2) Pulse test: Pulse width 40 ms
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
Typical thermal resistance
SYMBOL
VT5200
VFT5200
VBT5200
VIT5200
UNIT
RJC
3.5
7.0
3.5
3.5
°C/W
ORDERING INFORMATION (Example)
PACKAGE
UNIT WEIGHT (g)
PACKAGE CODE
BASE QUANTITY
DELIVERY MODE
TO-220AC
VT5200-E3/4W
PREFERRED P/N
1.82
4W
50/tube
Tube
ITO-220AC
VFT5200-E3/4W
1.65
4W
50/tube
Tube
TO-263AB
VBT5200-E3/4W
1.36
4W
50/tube
Tube
TO-263AB
VBT5200-E3/8W
1.36
8W
800/reel
Tape and reel
TO-262AA
VIT5200-E3/4W
1.44
4W
50/tube
Tube
Revision: 27-Feb-18
Document Number: 89176
2
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VT5200-E3, VFT5200-E3, VBT5200-E3, VIT5200-E3
www.vishay.com
Vishay General Semiconductor
RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted)
10
Instantaneous Reverse Current (mA)
Average Forward Rectified Current (A)
6
V(B,I)T5200
Resistive or Inductive Load
5
4
VFT5200
3
2
1
Mounted on Specific Heatsink
0
25
50
75
100
125
TA = 100 °C
0.1
0.01
0.001
TA = 25 °C
150
20
30
50
40
60
70
80
90
Case Temperature (°C)
Percent of Rated Peak Reverse Voltage (%)
Fig. 1 - Maximum Forward Current Derating Curve
Fig. 4 - Typical Reverse Characteristics
4.8
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
D = 0.5
4.0
Junction Capacitance (pF)
D = 0.3
3.6
D = 0.2
3.2
2.8
2.4
D = 1.0
D = 0.1
2.0
T
1.6
1.2
0.8
0.4
D = tp/T
tp
4
5
100
1000
D = 0.8
4.4
Average Power Disspation (W)
TA = 125 °C
1
0.0001
0
100
10
0
1
0
2
3
0.1
6
1
10
100
Average Forward Current (A)
Reverse Voltage (V)
Fig. 2 - Forward Power Dissipation Characteristics
Fig. 5 - Typical Junction Capacitance
100
10
TA = 150 °C
TA = 125 °C
10
TA = 100 °C
1
TA = 25 °C
0.1
0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
Junction to Case
Transient Thermal Impedance (°C/W)
Instantaneous Forward Current (A)
TA = 150 °C
1.6
VFT5200
V(B,I)T5200
1
0.01
0.1
1
10
100
Instantaneous Forward Voltage (V)
t - Pulse Duration (s)
Fig. 3 - Typical Instantaneous Forward Characteristics
Fig. 6 - Typical Transient Thermal Impedance
Revision: 27-Feb-18
Document Number: 89176
3
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VT5200-E3, VFT5200-E3, VBT5200-E3, VIT5200-E3
www.vishay.com
Vishay General Semiconductor
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
TO-220AC
0.415 (10.54)
0.380 (9.65)
0.161 (4.08)
DIA.
0.139 (3.53)
0.113 (2.87)
0.103 (2.62)
0.635 (16.13)
0.625 (15.87)
1
PIN
0.185 (4.70)
0.175 (4.44)
0.055 (1.39)
0.045 (1.14)
2
0.160 (4.06)
0.140 (3.56)
0.057 (1.45)
0.045 (1.14)
0.350 (8.89)
0.330 (8.38)
1.148 (29.16)
1.118 (28.40)
0.603 (15.32)
0.573 (14.55)
0.110 (2.79)
0.100 (2.54)
0.560 (14.22)
0.530 (13.46)
0.037 (0.94)
0.027 (0.68)
0.022 (0.56)
0.014 (0.36)
0.205 (5.20)
0.195 (4.95)
Revision: 27-Feb-18
Document Number: 89176
4
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VT5200-E3, VFT5200-E3, VBT5200-E3, VIT5200-E3
www.vishay.com
Vishay General Semiconductor
TO-262AA
0.411 (10.45)
0.380 (9.65)
0.950 (24.13)
0.920 (23.37)
1
PIN
2 3
0.185 (4.70)
0.175 (4.44)
0.055 (1.40)
0.047 (1.19)
0.055 (1.40)
0.045 (1.14)
0.401 (10.19)
0.381 (9.68)
0.350 (8.89)
0.330 (8.38)
0.510 (12.95)
0.470 (11.94)
0.160 (4.06)
0.140 (3.56)
0.110 (2.79)
0.100 (2.54)
0.057 (1.45)
0.045 (1.14)
0.104 (2.65)
0.096 (2.45)
0.560 (14.22)
0.530 (13.46)
0.035 (0.90)
0.028 (0.70)
0.205 (5.20)
0.195 (4.95)
D2PAK (TO-263AB)
0.411 (10.45)
0.380 (9.65)
0.190 (4.83)
0.160 (4.06)
0.245 (6.22)
MIN.
0.022 (0.56)
0.014 (0.35)
Mounting Pad Layout
0.42 (10.66) MIN.
0.055 (1.40)
0.045 (1.14)
K
0.33 (8.38) MIN.
0.360 (9.14)
0.320 (8.13)
NC
K
A
0.624 (15.85)
0.591 (15.00)
0 to 0.01 (0 to 0.254)
0.110 (2.79)
0.090 (2.29)
0.021 (0.53)
0.014 (0.36)
0.037 (0.940)
0.027 (0.686)
0.105 (2.67)
0.095 (2.41)
0.055 (1.40)
0.047 (1.19)
0.205 (5.20)
0.195 (4.95)
0.140 (3.56)
0.110 (2.79)
0.670 (17.02)
0.591 (15.00)
0.15 (3.81) MIN.
0.08 (2.032) MIN.
0.105 (2.67)
0.095 (2.41)
Revision: 27-Feb-18
Document Number: 89176
5
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product
with the properties described in the product specification is suitable for use in a particular application. Parameters provided in
datasheets and / or specifications may vary in different applications and performance may vary over time. All operating
parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited
to the warranty expressed therein.
Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and
for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of
any of the products, services or opinions of the corporation, organization or individual associated with the third-party website.
Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website
or for that of subsequent links.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
Revision: 01-Jan-2022
1
Document Number: 91000