VJ0603Y123JXAAP

VJ Commercial Series www.vishay.com Vishay Vitramon Surface Mount Multilayer Ceramic Chip Capacitors for Commercial Applications FEATURES • C0G (NP0) and X7R dielectrics offered • C0G (NP0) is an ultra-stable dielectric offering a very low Temperature Coefficient of Capacitance (TCC) • C0G (NP0) offers low dissipation • Excellent aging characteristics • Ideal for decoupling and filtering (X7R) • Ideal for surge suppression and high voltage Available applications • Wide range of case sizes, voltage ratings and capacitance values • Wet build process • Reliable Noble Metal Electrode (NME) system • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS • • • • Timing and tuning circuits Sensor and scanner applications Decoupling and filtering Surge suppression ELECTRICAL SPECIFICATIONS C0G (NP0) DIELECTRIC X7R DIELECTRIC GENERAL SPECIFICATION GENERAL SPECIFICATION Note Electrical characteristics at +25 °C unless otherwise specified Note Electrical characteristics at +25 °C unless otherwise specified Operating Temperature: -55 °C to +150 °C (above +125 °C changed characteristics) Operating Temperature: -55 °C to +150 °C (above +125 °C changed characteristics) Capacitance Range: 1 pF to 56 nF Capacitance Range: 120 pF to 6.8 μF Voltage Range: 25 VDC to 1000 VDC Voltage Range: 16 VDC to 1000 VDC Temperature Coefficient of Capacitance (TCC): 0 ppm/°C ± 30 ppm/°C from -55 °C to +125 °C Temperature Coefficient of Capacitance (TCC): ± 15 % from -55 °C to +125 °C, with 0 VDC applied Dissipation Factor (DF): 0.1 % maximum at 1.0 VRMS and 1 MHz for values ≤ 1000 pF 0.1 % maximum at 1.0 VRMS and 1 kHz for values > 1000 pF Dissipation Factor (DF): 16 V / 25 V ratings: 3.5 % maximum at 1.0 VRMS and 1 kHz > 25 V ratings: 2.5 % maximum at 1.0 VRMS and 1 kHz Insulating Resistance: at +25 °C 100 000 MΩ min. or 1000 ΩF whichever is less at +125 °C 10 000 MΩ min. or 100 ΩF whichever is less Aging Rate: 0 % maximum per decade Dielectric Strength Test: performed per method 103 of EIA 198-2-E. Applied test voltages 250 % of rated voltage ≤ 200 VDC-rated: 500 VDC-rated: 200 % of rated voltage 630 VDC,1000 VDC-rated: 150 % of rated voltage Insulating Resistance: at +25 °C 100 000 MΩ min. or 1000 ΩF whichever is less at +125 °C 10 000 MΩ min. or 100 ΩF whichever is less Aging Rate: 1 % maximum per decade Dielectric Strength Test: performed per method 103 of EIA 198-2-E. Applied test voltages ≤ 250 VDC-rated: 250 % of rated voltage 500 VDC-rated: min. 150 % of rated voltage 630 VDC, 1000 VDC-rated: min. 120 % of rated voltage Document Number: 45199 1 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Revision: 02-Aug-2023 VJ Commercial Series www.vishay.com Vishay Vitramon QUICK REFERENCE DATA DIELECTRIC CAPACITANCE CASE MAXIMUM VOLTAGE (V) MINIMUM MAXIMUM 0402 100 1.0 pF 220 pF 0603 250 1.0 pF 1.0 nF 0805 500 1.0 pF 4.7 nF 1206 630 1.0 pF 10 nF 1210 630 56 pF 12 nF 1808 1000 27 pF 10 nF 1812 1000 27 pF 22 nF 1825 500 100 pF 39 nF 2220 1000 270 pF 47 nF 2225 1000 270 pF 56 nF 0402 100 120 pF 47 nF 0603 200 330 pF 150 nF 0805 250 330 pF 470 nF 1206 630 330 pF 1.0 μF 1210 630 390 pF 1.0 μF 1808 1000 470 pF 270 nF 1812 1000 1.0 nF 1.0 μF 1825 1000 10 nF 2.7 μF 2220 500 15 nF 2.2 μF 2225 1000 33 nF 4.7 μF 3640 500 27 nF 6.8 μF C0G (NP0) X7R Note • Detail ratings see “Selection Chart” Document Number: 45199 2 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Revision: 02-Aug-2023 VJ Commercial Series www.vishay.com Vishay Vitramon ORDERING INFORMATION VJ0805 (1) Y 102 K X A A CASE CODE DIELECTRIC CAPACITANCE NOMINAL CODE CAPACITANCE TOLERANCE TERMINATION DC VOLTAGE RATING (2) MARKING 0402 0603 0805 1206 1210 1808 1812 1825 2220 2225 3640 A = C0G (NP0) Y = X7R Expressed in picofarads (pF). The first two digits are significant, the third is a multiplier. Examples: 1R8 = 1.8 pF 102 = 1000 pF B = ± 0.10 pF C = ± 0.25 pF D = ± 0.5 pF F=±1% G=±2% J=±5% K = ± 10 % M = ± 20 % Note C0G (NP0): B, C, D < 10 pF F, G, J, K ≥ 10 pF X7R: J, K, M X = Ni barrier 100 % tin plated matte finish F, E = AgPd (4) B = polymer 100 % tin plated matte finish (5) A= J = 16 V unmarked X = 25 V M = marked A = 50 V Note B = 100 V Marking C = 200 V is only P = 250 V E = 500 V available for 0805 and L = 630 V G = 1000 V 1206 with termination code “X” / “B” ### (3)(6) T PACKAGING PROCESS CODE C = 7" reel / paper tape T = 7" reel / plastic tape P = 11 1/4" / 13" reel / paper tape R = 11 1/4" / 13" reel / plastic tape O = 7" reel / flamed paper tape I = 11 1/4" / 13"reel / flamed paper tape Note “I” and “O” are used for “F”, “E” termination size 0402 / 0603 / 0805 Notes (1) (2) (3) (4) (5) (6) Case size designator may be replaced by four digit drawing number used to control non-standard products and / or special requirements DC voltage rating should not be exceeded in application. Other application factors may affect the MLCC performance. Consult for questions: mlcc@vishay.com Process code may be added with up to three digits, used to control non-standard products and / or special requirements Termination code “E” is for conductive epoxy assembly Polymer termination for size 0603 and larger. Packaging only in plastic tape “T” / “R” Variable plastic / paper tape, see ratings in “Selection Charts” ENVIRONMENTAL STATUS TERMINATION CODE TERMINATION DESCRIPTION RoHS COMPLIANT VISHAY GREEN X Ni barrier 100 % tin plated matte finish Yes Yes E AgPd Yes Yes B Polymer layer, 100 % tin plated matte finish Yes No F AgPd Yes No Document Number: 45199 3 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Revision: 02-Aug-2023 VJ Commercial Series www.vishay.com Vishay Vitramon DIMENSIONS in inches (millimeters) W L T MAX. P CASE CODE STYLE TERMINATION (P) LENGTH (L) WIDTH (W) MAXIMUM THICKNESS (T) MINIMUM MAXIMUM 0402 VJ0402 0.040 + 0.004 / - 0.002 (1.00 + 0.10 / - 0.05) 0.020 + 0.004 / - 0.002 (0.50 + 0.10 / - 0.05) 0.024 (0.60) 0.004 (0.10) 0.016 (0.41) 0603 VJ0603 0.063 ± 0.006 (1.60 ± 0.15) 0.031 ± 0.006 (0.80 ± 0.15) 0.038 (0.97) 0.012 (0.30) 0.022 (0.55) 0805 VJ0805 0.079 ± 0.008 (2.00 ± 0.20) 0.049 ± 0.008 (1.25 ± 0.20) 0.057 (1.45) 0.010 (0.25) 0.030 (0.76) 1206 VJ1206 0.126 ± 0.010 (3.20 ± 0.25) 0.063 ± 0.010 (1.60 ± 0.25) 0.067 (1.70) 0.010 (0.25) 0.030 (0.76) 1210 VJ1210 0.126 ± 0.010 (3.20 ± 0.25) 0.098 ± 0.010 (2.50 ± 0.25) 0.067 (1.70) 0.010 (0.25) 0.030 (0.76) 1808 VJ1808 0.180 ± 0.012 (4.57 ± 0.30) 0.080 ± 0.010 (2.03 ± 0.25) 0.086 (2.18) 0.010 (0.25) 0.035 (0.90) 1812 VJ1812 0.177 ± 0.012 (4.50 ± 0.30) 0.126 ± 0.008 (3.20 ± 0.20) 0.086 (2.18) 0.010 (0.25) 0.035 (0.90) 1825 VJ1825 0.177 ± 0.012 (4.50 ± 0.30) 0.252 ± 0.010 (6.40 ± 0.25) 0.086 (2.18) 0.010 (0.25) 0.035 (0.90) 2220 VJ2220 0.220 ± 0.010 (5.59 ± 0.25) 0.200 ± 0.010 (5.08 ± 0.25) 0.086 (2.18) 0.010 (0.25) 0.037 (0.95) 2225 VJ2225 0.220 ± 0.010 (5.59 ± 0.25) 0.250 ± 0.010 (6.35 ± 0.25) 0.086 (2.18) 0.010 (0.25) 0.037 (0.95) 3640 VJ3640 0.360 ± 0.015 (9.14 ± 0.38) 0.400 ± 0.015 (10.20 ± 0.38) 0.086 (2.18) 0.010 (0.25) 0.039 (1.00) Note • Polymer (B-termination) have increased dimensions: length 0.006"(0.15 mm) Document Number: 45199 4 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Revision: 02-Aug-2023 VJ Commercial Series www.vishay.com Vishay Vitramon SELECTION CHART DIELECTRIC C0G (NP0) STYLE VJ0402 VJ0603 VJ0805 VJ1206 (1) CASE CODE 0402 0603 0805 1206 VOLTAGE (VDC) 25 50 100 50 100 200 250 50 100 200 500 50 100 200 500 630 VOLTAGE CODE X A B A B C P A B C E A B C E L CAP. CODE CAP. 1R0 1.0 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• 1R2 1.2 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• 1R5 1.5 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• 1R8 1.8 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• 2R2 2.2 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• 2R7 2.7 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• 3R3 3.3 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• 3R9 3.9 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• 4R7 4.7 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• 5R6 5.6 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• 6R8 6.8 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• 8R2 8.2 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• 100 10 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• 120 12 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• 150 15 pF 180 18 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• 220 22 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• 270 27 pF 330 33 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• 390 39 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• 470 47 pF 560 56 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• 680 68 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• 820 82 pF 101 100 pF •• •• •• •• •• •• •• •• •• •• • • • • • •• •• •• •• • • • • • 121 120 pF •• •• •• •• •• •• •• •• •• •• •• •• •• • • • • • 151 150 pF •• •• 181 180 pF •• •• •• •• • •• •• •• •• • • • • • •• •• • •• •• •• • • • • • • 221 220 pF •• •• •• •• • •• •• •• • • • • • • 271 270 pF 331 330 pF •• •• •• •• •• • • • • • • •• •• •• •• •• • • • • • • 391 390 pF •• •• •• • • • • • • • 471 470 pF 561 560 pF •• •• •• • • • • • • •• •• •• • • • • • • 681 680 pF •• •• •• • • • • • • 821 820 pF 102 1.0 nF •• •• •• • • • • • • •• • • • • 122 1.2 nF •• • • • • 152 1.5 nF 182 1.8 nF • • • • • • • • 222 2.2 nF • • • • 272 2.7 nF 332 3.3 nF • • • • • • • 392 3.9 nF • • • 472 4.7 nF 562 5.6 nF • • • • 682 6.8 nF • • 822 8.2 nF 103 10 nF • • 123 12 nF 153 15 nF 183 18 nF 223 22 nF 273 27 nF 333 33 nF 393 39 nF 473 47 nF 563 56 nF Notes RoHS-compliant •• Paper tape • Plastic tape (1) See soldering recommendations within this data book, or visit www.vishay.com/doc?45034 50 A • • • • • • • • • • • • • • • • • • • • • • • • • VJ1210 (1) 1210 100 200 500 630 B C E L • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • Document Number: 45199 5 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Revision: 02-Aug-2023 VJ Commercial Series www.vishay.com Vishay Vitramon SELECTION CHART DIELECTRIC C0G (NP0) VJ1812 (1) STYLE VJ1808 (1) CASE CODE 1808 1812 50 100 200 500 1000 50 100 200 500 VOLTAGE (VDC) VOLTAGE CODE A B C E G A B C E CAP. CODE CAP. 1R0 1.0 pF 1R2 1.2 pF 1R5 1.5 pF 1R8 1.8 pF 2R2 2.2 pF 2R7 2.7 pF 3R3 3.3 pF 3R9 3.9 pF 4R7 4.7 pF 5R6 5.6 pF 6R8 6.8 pF 8R2 8.2 pF 100 10 pF 120 12 pF 150 15 pF 180 18 pF 220 22 pF • • 270 27 pF 330 33 pF • • • • • • • • 390 39 pF • • • • • • 470 47 pF 560 56 pF • • • • • • • • • • • • 680 68 pF • • • • • • 820 82 pF 101 100 pF • • • • • • • • • • • • • 121 120 pF • • • • • • • 151 150 pF 181 180 pF • • • • • • • • • • • • • • • • 221 220 pF • • • • • • • • • 271 270 pF 331 330 pF • • • • • • • • • • • • • • • • • • 391 390 pF • • • • • • • • • 471 470 pF 561 560 pF • • • • • • • • • • • • • • • • • • 681 680 pF • • • • • • • • • 821 820 pF 102 1.0 nF • • • • • • • • • • • • • • • • • 122 1.2 nF • • • • • • • • 152 1.5 nF 182 1.8 nF • • • • • • • • • • • • • • • 222 2.2 nF • • • • • • • 272 2.7 nF 332 3.3 nF • • • • • • • • • • • • • • 392 3.9 nF • • • • • • • 472 4.7 nF 562 5.6 nF • • • • • • • • • • • • • • 682 6.8 nF • • • • • • 822 8.2 nF • • • • • 103 10 nF 123 12 nF • • • • • 153 15 nF • 183 18 nF 223 22 nF • 273 27 nF 333 33 nF 393 39 nF 473 47 nF 563 56 nF Notes RoHS-compliant • Plastic tape (1) See soldering recommendations within this data book, or visit www.vishay.com/doc?45034 1000 G 50 A VJ1825 (1) 1825 100 200 B C 500 E • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • Document Number: 45199 6 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Revision: 02-Aug-2023 VJ Commercial Series www.vishay.com Vishay Vitramon SELECTION CHART DIELECTRIC C0G (NP0) STYLE VJ2220 (1) CASE CODE 2220 50 100 200 500 630 1000 50 VOLTAGE (VDC) VOLTAGE CODE A B C E L G A CAP. CODE CAP. 1R0 1.0 pF 1R2 1.2 pF 1R5 1.5 pF 1R8 1.8 pF 2R2 2.2 pF 2R7 2.7 pF 3R3 3.3 pF 3R9 3.9 pF 4R7 4.7 pF 5R6 5.6 pF 6R8 6.8 pF 8R2 8.2 pF 100 10 pF 120 12 pF 150 15 pF 180 18 pF 220 22 pF 270 27 pF 330 33 pF 390 39 pF 470 47 pF 560 56 pF 680 68 pF 820 82 pF 101 100 pF 121 120 pF 151 150 pF 181 180 pF 221 220 pF • • • • • • 271 270 pF 331 330 pF • • • • • • • • • • • • 391 390 pF • • • • • • 471 470 pF 561 560 pF • • • • • • • • • • • • 681 680 pF • • • • • • 821 820 pF 102 1.0 nF • • • • • • • • • • • • • 122 1.2 nF • • • • • • • 152 1.5 nF 182 1.8 nF • • • • • • • • • • • • • • 222 2.2 nF • • • • • • • 272 2.7 nF 332 3.3 nF • • • • • • • • • • • • • • 392 3.9 nF • • • • • • • 472 4.7 nF 562 5.6 nF • • • • • • • • • • 682 6.8 nF • • • • 822 8.2 nF • • • • 103 10 nF 123 12 nF • • • • • • • • 153 15 nF • • • 183 18 nF 223 22 nF • • • • • • 273 27 nF • • • 333 33 nF 393 39 nF • • • • 473 47 nF • 563 56 nF Notes RoHS-compliant • Plastic tape (1) See soldering recommendations within this data book, or visit www.vishay.com/doc?45034 100 B • • • • • • • • • • • • • • • • • • • • VJ2225 (1) 2225 200 C • • • • • • • • • • • • • • • • • • • • 500 E • • • • • • • • • • • • • • • • • • 1000 G • • • • • • • • • • • • • • • Document Number: 45199 7 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Revision: 02-Aug-2023 VJ Commercial Series www.vishay.com Vishay Vitramon SELECTION CHART DIELECTRIC STYLE VJ0402 CASE CODE 0402 VOLTAGE (VDC) 16 25 50 100 VOLTAGE CODE J X A B CAP. CODE CAP. 121 120 pF •• •• •• •• 151 150 pF •• •• •• •• 181 180 pF •• •• •• •• 221 220 pF •• •• •• •• 271 270 pF •• •• •• •• 331 330 pF •• •• •• •• 391 390 pF •• •• •• •• 471 470 pF •• •• •• •• 561 560 pF •• •• •• •• 681 680 pF •• •• •• •• 821 820 pF •• •• •• •• 102 1.0 nF •• •• •• •• 122 1.2 nF •• •• •• •• 152 1.5 nF •• •• •• •• 182 1.8 nF •• •• •• •• 222 2.2 nF •• •• •• •• 272 2.7 nF •• •• •• •• 332 3.3 nF •• •• •• •• 392 3.9 nF •• •• •• •• 472 4.7 nF •• •• •• •• 562 5.6 nF •• •• •• 682 6.8 nF •• •• •• 822 8.2 nF •• •• •• 103 10 nF •• •• •• 123 12 nF •• •• 153 15 nF •• •• 183 18 nF •• •• 223 22 nF •• 273 27 nF •• 333 33 nF •• 393 39 nF •• 473 47 nF •• 563 56 nF 683 68 nF 823 82 nF 104 100 nF 124 120 nF 154 150 nF 184 180 nF 224 220 nF 274 270 nF 334 330 nF 394 390 nF 474 470 nF 564 560 nF 684 680 nF 824 820 nF 105 1.0 μF 125 1.2 μF 155 1.5 μF 185 1.8 μF 225 2.2 μF 275 2.7 μF 335 3.3 μF 395 3.9 μF 475 4.7 μF 565 5.6 μF 685 6.8 μF Notes RoHS-compliant •• Paper tape • Plastic tape ••• Variable plastic / paper tape 16 J 25 X •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• X7R VJ0603 0603 50 100 A B •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• 200 C •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• 16 J •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• • • • • • • • • • • 25 X •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• • • • • • • • • VJ0805 0805 50 100 A B •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• • • • • • •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• • • • • • • • 200 C •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• • • • • 250 P •• •• •• •• •• •• •• •• •• •• •• •• • • • • • Document Number: 45199 8 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Revision: 02-Aug-2023 VJ Commercial Series www.vishay.com Vishay Vitramon SELECTION CHART DIELECTRIC X7R STYLE VJ1206 (1) CASE CODE 1206 16 25 50 100 200 250 500 630 16 25 VOLTAGE (VDC) VOLTAGE CODE J X A B C P E L J X CAP. CODE CAP. 121 120 pF 151 150 pF 181 180 pF 221 220 pF 271 270 pF •• •• 331 330 pF •• •• 391 390 pF 471 470 pF •• •• •• •• •• •• •• •• •• •• •• •• 561 560 pF •• •• •• •• •• •• 681 680 pF 821 820 pF •• •• •• •• •• •• •• •• •• •• •• •• •• 102 1.0 nF •• •• •• •• •• •• •• 122 1.2 nF 152 1.5 nF •• •• •• •• •• •• •• •• •• •• •• •• •• •• 182 1.8 nF •• •• •• •• •• •• •• 222 2.2 nF 272 2.7 nF •• •• •• •• •• •• •• •• •• •• •• •• •• •• 332 3.3 nF •• •• •• •• •• •• •• 392 3.9 nF 472 4.7 nF •• •• •• •• •• •• •• •• •• •• •• •• • • 562 5.6 nF •• •• •• •• •• • • 682 6.8 nF 822 8.2 nF •• •• •• •• •• • • •• •• •• •• •• • • • • • 103 10 nF •• •• •• •• •• • • • • • 123 12 nF 153 15 nF •• •• •• •• •• • • • • • •• •• •• •• •• • • • • • 183 18 nF •• •• •• •• •• • • • 223 22 nF 273 27 nF •• •• •• •• •• • • • •• •• •• •• •• • • • 333 33 nF •• •• •• •• • • • • 393 39 nF 473 47 nF •• •• •• •• • • • • •• •• •• •• • • • • 563 56 nF •• •• •• •• • • • • 683 68 nF 823 82 nF •• •• • • • • • • • • • • • • • • 104 100 nF • • • • • • 124 120 nF 154 150 nF • • • • • • • • • • • • 184 180 nF • • • • • • 224 220 nF 274 270 nF • • • • • • • • • • • 334 330 nF • • • • • 394 390 nF 474 470 nF • • • • • • • • • 564 560 nF • • • • 684 680 nF 824 820 nF • • • • • • • • 105 1.0 μF 125 1.2 μF 155 1.5 μF 185 1.8 μF 225 2.2 μF 275 2.7 μF 335 3.3 μF 395 3.9 μF 475 4.7 μF 565 5.6 μF 685 6.8 μF Notes RoHS-compliant •• Paper tape • Plastic tape (1) See soldering recommendations within this data book, or visit www.vishay.com/doc?45034 50 A • • • • • • • • • • • • • • • • • • • • • • • • • VJ1210 (1) 1210 100 200 B C • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 250 P • • • • • • • 500 E 630 L • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • Document Number: 45199 9 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Revision: 02-Aug-2023 VJ Commercial Series www.vishay.com Vishay Vitramon SELECTION CHART DIELECTRIC X7R STYLE VJ1808 (1) VJ1812 (1) CASE CODE 1808 1812 VOLTAGE (VDC) 50 100 200 500 1000 25 50 100 200 250 500 630 1000 VOLTAGE CODE A B C E G X A B C P E L G CAP. CODE CAP. 121 120 pF 151 150 pF 181 180 pF 221 220 pF 271 270 pF 331 330 pF 391 390 pF • 471 470 pF • 561 560 pF • 681 680 pF 821 820 pF • • • • • • 102 1.0 nF • • • • • 122 1.2 nF 152 1.5 nF • • • • • • • • • • 182 1.8 nF • • • • • 222 2.2 nF 272 2.7 nF • • • • • • • • • • 332 3.3 nF • • • • • 392 3.9 nF 472 4.7 nF • • • • • • • • • • • • 562 5.6 nF • • • • • • 682 6.8 nF 822 8.2 nF • • • • • • • • • • • • • • • 103 10 nF • • • • • • • • 123 12 nF 153 15 nF • • • • • • • • • • • • • • • • 183 18 nF • • • • • • • • • • • 223 22 nF 273 27 nF • • • • • • • • • • • • • • • • • • • • 333 33 nF • • • • • • • • • 393 39 nF 473 47 nF • • • • • • • • • • • • • • • • • • 563 56 nF • • • • • • • • • 683 68 nF 823 82 nF • • • • • • • • • • • • • • • • • • 104 100 nF • • • • • • • 124 120 nF • 154 150 nF • • • • • • • • • • • • • 184 180 nF • • • • • • 224 220 nF • 274 270 nF • • • • • • • • • • • 334 330 nF • • • • 394 390 nF 474 470 nF • • • • • • • 564 560 nF • • • 684 680 nF 824 820 nF • • • • • 105 1.0 μF 125 1.2 μF 155 1.5 μF 185 1.8 μF 225 2.2 μF 275 2.7 μF 335 3.3 μF 395 3.9 μF 475 4.7 μF 565 5.6 μF 685 6.8 μF Notes RoHS-compliant • Plastic tape (1) See soldering recommendations within this data book, or visit www.vishay.com/doc?45034 25 X 50 A • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • VJ1825 (1) 1825 100 200 250 500 B C P E • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 1000 G • • • • • • • • • • Document Number: 45199 10 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Revision: 02-Aug-2023 VJ Commercial Series www.vishay.com Vishay Vitramon SELECTION CHART DIELECTRIC X7R STYLE VJ2220 (1) VJ2225 (1) CASE CODE 2220 2225 VOLTAGE (VDC) 50 100 200 500 25 50 100 200 500 VOLTAGE CODE A B C E X A B C E CAP. CODE CAP. 121 120 pF 151 150 pF 181 180 pF 221 220 pF 271 270 pF 331 330 pF 391 390 pF 471 470 pF 561 560 pF 681 680 pF 821 820 pF 102 1.0 nF 122 1.2 nF 152 1.5 nF 182 1.8 nF 222 2.2 nF 272 2.7 nF 332 3.3 nF 392 3.9 nF 472 4.7 nF 562 5.6 nF 682 6.8 nF 822 8.2 nF 103 10 nF 123 12 nF • 153 15 nF 183 18 nF • • 223 22 nF • 273 27 nF 333 33 nF • • • • • • • • • • • • 393 39 nF • • • • • • 473 47 nF 563 56 nF • • • • • • • • • • • • 683 68 nF • • • • • • 823 82 nF 104 100 nF • • • • • • • • • • • • • • 124 120 nF • • • • • • • 154 150 nF 184 180 nF • • • • • • • • • • • • • • • 224 220 nF • • • • • • • • 274 270 nF 334 330 nF • • • • • • • • • • • • • • • 394 390 nF • • • • • • • 474 470 nF 564 560 nF • • • • • • • • • • • • • • 684 680 nF • • • • • • • 824 820 nF 105 1.0 μF • • • • • • • • • • • • • 125 1.2 μF 155 1.5 μF • • • • • • • • 185 1.8 μF • • • 225 2.2 μF 275 2.7 μF • • • 335 3.3 μF • 395 3.9 μF 475 4.7 μF • 565 5.6 μF 685 6.8 μF Notes RoHS-compliant • Plastic tape (1) See soldering recommendations within this data book, or visit www.vishay.com/doc?45034 1000 G 25 X VJ3640 (1) 3640 50 100 200 A B C • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 500 E • • • • • • • • • • • • • • • • • • Document Number: 45199 11 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Revision: 02-Aug-2023 VJ Commercial Series www.vishay.com Vishay Vitramon C0G (NP0) DIELECTRIC - TYPICAL PARAMETERS Temperature Coefficient of Capacitance Insulation Resistance vs. Temperature 10000 10 000 10000 2.0 0 -0.5 100 -1.0 1000 1000 100 100 1st line 2nd line 1000 0.5 2nd line Insulation Resistance (ΩF) 1.0 1st line 2nd line 2nd line Capacitance Change (%) 1.5 -1.5 -75 -50 -25 0 10 10 10 -2.0 10 25 50 75 100 125 150 175 25 Aging Rate 0.2 1000 0 100 -0.1 -0.2 100 1000 10 10 000 10000 0.1 1000 1st line 2nd line 0.1 2nd line Capacitance Change (%) 10000 1st line 2nd line 2nd line Capacitance Change (%) 150 Voltage Coefficient of Capacitance 0.2 10 100 Temperature (°C) Temperature (°C) 1 50 0 100 -0.1 10 -0.2 0 Hours 10 20 30 40 50 60 70 80 90 100 Applied DC Voltage (VDC) Change of Capacitance with Frequency 10000 1 1000 1st line 2nd line 2nd line Capacitance Change (%) 2 0 100 -1 -2 1 10 100 10 1000 Frequency (kHz) Document Number: 45199 12 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Revision: 02-Aug-2023 VJ Commercial Series www.vishay.com Vishay Vitramon X7R DIELECTRIC - TYPICAL PARAMETERS Temperature Coefficient of Capacitance Insulation Resistance vs. Temperature 10000 10 000 10000 15 -5 -10 100 -15 -20 1000 1000 100 100 1st line 2nd line 1000 0 2nd line Insulation Resistance (ΩF) 5 1st line 2nd line 2nd line Capacitance Change (%) 10 -25 -75 -50 -25 0 10 10 10 -30 10 25 50 75 100 125 150 175 25 100 Temperature (°C) Temperature (°C) Aging Rate Dissipation Factor vs. Temperature 6.0 150 10000 1 10000 5.5 1000 3.5 3.0 2.5 2.0 100 1.5 1.0 0 1000 -1 1st line 2nd line 4.0 2nd line Capacitance Change (%) 4.5 1st line 2nd line 2nd line Dissipation Factor (%) 5.0 -2 100 -3 0.5 -75 -50 -25 0 1 25 50 75 100 125 150 175 10 100 1000 Hours Temperature (°C) Voltage Coefficient of Capacitance Rated Voltage vs. Temperature 10000 5 10000 200 1000 100 100 50 -5 1000 1st line 2nd line 150 2nd line Capacitance Change (%) 0 1st line 2nd line 2nd line Rated Voltage (%) 10 10 000 -4 10 0 -10 100 V rated 25 V rated -15 50 V rated 100 -20 -25 10 0 -75 -50 -25 0 25 50 75 100 125 150 175 Temperature (°C) 10 -30 0 10 20 30 40 50 60 70 80 90 100 Applied DC Voltage (VDC) Document Number: 45199 13 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Revision: 02-Aug-2023 VJ Commercial Series www.vishay.com Vishay Vitramon X7R DIELECTRIC - TYPICAL PARAMETERS Dissipation Factor vs. Voltage Dissipation Factor vs. Voltage 0.020 0.020 10000 0.012 100 V 100 0.008 1000 1st line 2nd line 2nd line Dissipation Factor 0.016 1000 1st line 2nd line 2nd line Dissipation Factor 0.016 10000 0.012 100 0.008 500 V / 630 V 50 V 200 V 10 0.004 0 10 20 30 40 50 60 70 80 90 100 0 Applied DC Voltage (VDC) 200 300 400 500 600 700 (1)(2)(3) 7" REEL QUANTITIES TAPE SIZE 100 Applied DC Voltage (VDC) STANDARD PACKAGING QUANTITIES CASE CODE 10 0.004 PAPER TAPE PACKAGING CODE “C” / “O” 11 1/4" AND 13" REEL QUANTITIES PLASTIC TAPE PACKAGING CODE “T” PAPER TAPE PACKAGING CODE “P” / “I” PLASTIC TAPE PACKAGING CODE “R” 0402 8 mm 5000 n/a 10 000 n/a 0603 (4)(5)(6) 8 mm 4000 4000 10 000 10 000 0805 (4)(5) 8 mm 3000 3000 10 000 10 000 1206 (4)(5) 8 mm 3000 2500 / 3000 10 000 9000 / 10 000 1210 (4) 8 mm n/a 2000 / 2500 / 3000 n/a 9000 / 10 000 1808 12 mm n/a 2000 n/a 10 000 1812 12 mm n/a 1000 n/a 4000 1825 12 mm n/a 1000 n/a 4000 2220 12 mm n/a 1000 n/a n/a 2225 12 mm n/a 500 n/a n/a 3640 16 mm n/a 500 n/a n/a Notes (1) Vishay Vitramon uses embossed plastic carrier tape (2) REFERENCE: EIA standard RS 481 - “Taping of Surface Mount Components for Automatic Placement” (3) n/a = not available (4) Packaging “C” / “P” / “O” / “I” and “T” / “R” or lower quantities can depend from product thickness (5) Polymer termination, code “B”, only available in plastic tape “T” / “R” (6) Variable packaging codes, see ratings in “Selection Charts” STORAGE AND HANDLING CONDITIONS (1) Store the components at 5 °C to 40 °C ambient temperature and ≤ 70 % relative humidity conditions. (2) The product is recommended to be used within a time-frame of 2 years after shipment. Check solderability in case extended shelf life beyond the expiry date is needed. Precautions: a. Do not store products in an environment containing corrosive elements, especially where chloride gas, sulfide gas, acid, alkali, salt or the like are present. This may cause corrosion or oxidization of the terminations, which can easily lead to poor soldering. b. Store products on the shelf and avoid exposure to moisture or dust. c. Do not expose products to excessive shock, vibration, direct sunlight and so on. Document Number: 45199 14 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Revision: 02-Aug-2023 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2023 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2023 1 Document Number: 91000