VJ0805V123MXJCW1BC

VJ....W1BC Basic Commodity Series www.vishay.com Vishay Surface Mount Multilayer Ceramic Chip Capacitors for Commodity Applications FEATURES • • • • • • • Available from 0402 to 1210 body sizes Ultra stable C0G (NP0) dielectric High capacitance in X5R, X7R Ni-barrier with 100 % tin terminations Dry sheet technology process Base Metal Electrode system (BME) Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS • • • • Consumer electronics Telecommunications Data processing Mobile applications ELECTRICAL SPECIFICATIONS Operating Temperature: C0G (NP0): -55 °C to +125 °C X5R: -55 °C to +85 °C X7R: -55 °C to +125 °C Capacitance Range: C0G (NP0): 0.5 pF to 39 nF X5R: 47 nF to 220 μF X7R: 100 pF to 47 μF Test Conditions for Capacitance and DF Measurement: measured at conditions of 30 % to 70 % related humidity. C0G (NP0): Apply 1.0 VRMS ± 0.2 VRMS, 1.0 MHz ± 10 % for caps ≤ 1000 pF, at +25 °C ambient temperature Apply 1.0 VRMS ± 0.2 VRMS, 1.0 kHz ± 10 % for caps > 1000 pF, at +25 °C ambient temperature X5R / X7R: Caps ≤ 10 μF apply 1.0 VRMS ± 0.2 VRMS, 1.0 kHz ± 10 %, at +25 °C ambient temperature (1) Caps > 10 μF apply 0.5 VRMS ± 0.2 VRMS, 120 Hz ± 20 %, at +25 °C ambient temperature Voltage Range: C0G (NP0): 10 VDC to 100 VDC X5R: 6.3 VDC to 50 VDC X7R: 10 VDC to 100 VDC Note (1) Test conditions: 0.5 V RMS ± 0.2 VRMS, 1 kHz ± 10 % X7R: 0603: ≥ 2.2 μF / 10 V 0805: 10 μF (6.3 V and 10 V) X5R: 0402: ≥ 4.7 μF / 6.3 V and ≥ 2.2 μF / 10 V 0603: 10 μF (6.3 V and 10 V) Temperature Coefficient of Capacitance (TCC): C0G (NP0): 0 ppm/°C ± 30 ppm/°C from -55 °C to +125 °C X5R: ± 15 % from -55 °C to +85 °C without voltage applied X7R: ± 15 % from -55 °C to +125 °C without voltage applied Insulation Resistance (IR) at UR: ≥ 10 GΩ or R x C ≥ 500 Ω x F whichever is less Test Conditions for Capacitance Tolerance: preconditioning for X5R, X7R MLCC: perform a heat treatment at +150 °C ± 10 °C for 1 h, then leave in ambient condition for 24 h ± 2 h before measurement Revision: 14-Aug-2023 Aging Rate: C0G (NP0): 0 % per decade X5R: 6.3 VDC / 10 VDC: 3 % maximum per decade 16 VDC / 25 VDC: 2 % maximum per decade X7R: ≤ 10 VDC: 1.5 % maximum per decade ≥ 16 VDC: 1 % maximum per decade Dielectric Strength Test: this is the maximum voltage the capacitors are tested 1 s to 5 s period and the charge / discharge current does not exceed 50 mA. ≤ 100 VDC: 250 % of rated voltage Document Number: 28548 1 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ....W1BC Basic Commodity Series www.vishay.com Vishay Dissipation Factor (DF): C0G (NP0): Cap. < 30 pF: Q ≥ 400 + 20C Cap. ≥ 30 pF: Q ≥ 1000 X5R, X7R: RATED VOLTAGE D.F. ≤ ≥ 100 V 2.5 % ≥ 50 V 25 V 16 V 10 V 6.3 V 4V 2.5 % EXCEPTION OF D.F. ≤ 3% 1206 ≥ 0.47 μF 5% 0603 ≥ 0.068 μF; 0805 > 0.1 μF; 1206 > 1 μF 3% 0603 ≥ 0.047 μF; 0805 ≥ 0.18 μF; 1206 ≥ 0.47 μF 5% 1210 ≥ 4.7 μF 10 % 0402 ≥ 0.1 μF; 0603 ≥ 1 μF; 0805 ≥ 1 μF; 1206 ≥ 2.2 μF; 1210 ≥ 10 μF 5% 0805 ≥ 1 μF; 1210 ≥ 10 μF 7% 0603 ≥ 0.33 μF; 1206 ≥ 4.7 μF 10 % 0402 ≥ 0.10 μF; 0603 ≥ 0.47 μF; 0805 ≥ 2.2 μF; 1206 ≥ 6.8 μF; 1210 ≥ 22 μF 5% 0402 ≥ 0.033 μF; 0603 ≥ 0.15 μF; 0805 ≥ 0.68 μF; 1206 ≥ 2.2 μF; 1210 ≥ 4.7 μF 10 % 0402 ≥ 0.22 μF; 0603 ≥ 0.68 μF; 0805 ≥ 2.2 μF; 1206 ≥ 4.7 μF; 1210 ≥ 22 μF 10 % 0402 ≥ 0.33 μF; 0402/X7R ≥ 0.22 μF 0603 ≥ 0.33 μF; 0805 ≥ 2.2 μF; 1206 ≥ 2.2 μF; 1210 ≥ 22 μF 3.5 % 3.5 % 5% 10 % 15 % 0402 ≥ 1 μF 15 % 0402 ≥ 1 μF; 0603 ≥ 10 μF; 0805 ≥ 4.7 μF; 1206 ≥ 47 μF; 1210 ≥ 100 μF 20 % 0402 ≥ 2.2 μF - - 15 % QUICK REFERENCE DATA DIELECTRIC C0G (NP0) X5R X7R CAPACITANCE CASE MAXIMUM VOLTAGE (V) MINIMUM MAXIMUM 0402 100 0.5 pF 1.0 nF 0603 100 0.5 pF 3.3 nF 0805 100 0.5 pF 12 nF 1206 100 1.5 pF 39 nF 0402 50 47 nF 10 μF 0603 50 220 nF 22 μF 0805 50 1.5 μF 47 μF 1206 50 1.5 μF 100 μF 1210 50 1.5 μF 220 μF 0402 50 100 pF 1.0 μF 0603 100 100 pF 2.2 μF 0805 100 100 pF 10 μF 1206 100 150 pF 22 μF 1210 100 1.0 nF 47 μF Note • Detail ratings see “Selection Chart” Revision: 14-Aug-2023 Document Number: 28548 2 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ....W1BC Basic Commodity Series www.vishay.com Vishay ORDERING INFORMATION VJ0402 Y 101 J X Q C W1BC SIZE CODE DIELECTRIC CAPACITANCE TOLERANCE TERMINATION VOLTAGE (1) PACKAGING PROCESS CODE FOR BASIC COMMODITY 0402 0603 0805 1206 1210 A = C0G (NP0) G = X5R Y = X7R Two significant digits followed by the number of zeros: 1R0 = 1.0 pF 101 = 100 pF 102 = 1000 pF 152 = 1500 pF 103 = 10 000 pF 104 = 100 000 pF C0G (NP0) (2) Cap. < 10 pF: B = ± 0.10 pF C = ± 0.25 pF D = ± 0.50 pF X = Ni barrier 100 % matte tin S=4V Y = 6.3 V Q = 10 V J = 16 V X = 25 V A = 50 V B = 100 V C = 7" reel / paper tape P = 13" reel / paper tape T = 7" reel / plastic tape R = 13" reel / plastic tape Cap. ≥ 10 pF: F=±1% G=±2% J=±5% K = ± 10 % X5R / X7R (2)(3) J=±5% K = ± 10 % M = ± 20 % Notes • Detail rating see “Selection Chart” (1) DC voltage rating should not be exceeded in application. Other application factors may affect the MLCC performance. Consult for questions: mlcc@vishay.com (2) Not all values, see “Selection Chart” (3) No 5 % tolerance for X5R Revision: 14-Aug-2023 Document Number: 28548 3 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ....W1BC Basic Commodity Series www.vishay.com Vishay DIMENSIONS in inches (millimeters) W T MB MB L SIZE CODE 0402 (1005) 0603 (1608) 0805 (2012) 1206 (3216) 1210 (3225) THICKNESS SYMBOL SOLDERING METHOD (1) L W T N R 0.040 ± 0.002 (1.00 ± 0.05) 0.020 ± 0.002 (0.50 ± 0.05) 0.020 ± 0.002 (0.50 ± 0.05) E R 0.040 ± 0.008 (1.00 ± 0.20) 0.020 ± 0.008 (0.50 ± 0.20) 0.020 ± 0.008 (0.50 ± 0.20) S R/W 0.063 ± 0.004 (1.60 ± 0.10) 0.030 ± 0.004 (0.80 ± 0.10) 0.030 ± 0.0028 (0.80 ± 0.07) X R/W 0.063 + 0.006 / - 0.004 (1.60 + 0.15 / - 0.10) 0.030 + 0.006 / - 0.004 (0.80 + 0.15 / - 0.10) 0.030 + 0.006 / - 0.004 (0.80 + 0.15 / - 0.10) X' R/W 0.063 ± 0.008 (1.60 ± 0.20) 0.030 ± 0.008 (0.80 ± 0.20) 0.030 ± 0.008 (0.80 ± 0.20) A R/W B R/W D R T R/W I R B R/W C R D R J R G R P R C R D R G R K R M R MB 0.010 + 0.002 / - 0.004 (0.25 + 0.05 / - 0.10) 0.016 ± 0.006 (0.40 ± 0.15) 0.024 ± 0.004 (0.60 ± 0.10) 0.080 ± 0.006 (2.00 ± 0.15) 0.050 ± 0.004 (1.25 ± 0.10) 0.030 ± 0.004 (0.80 ± 0.10) 0.049 ± 0.004 (1.25 ± 0.10) 0.080 ± 0.008 (2.00 ± 0.20) 0.050 ± 0.008 (1.25 ± 0.20) 0.020 ± 0.008 (0.50 ± 0.20) 0.033 ± 0.004 (0.85 ± 0.10) 0.049 ± 0.008 (1.25 ± 0.20) 0.030 ± 0.004 (0.80 ± 0.10) 0.126 ± 0.006 (3.20 ± 0.15) 0.063 ± 0.006 (1.60 ± 0.15) 0.037 ± 0.004 (0.95 ± 0.10) 0.049 ± 0.004 (1.25 ± 0.10) 0.045 ± 0.006 (1.15 ± 0.15) 0.126 ± 0.008 (3.20 ± 0.20) 0.063 ± 0.008 (1.60 ± 0.20) 0.063 ± 0.008 (1.60 ± 0.20) 0.126 + 0.012 / - 0.004 (3.20 + 0.30 / - 0.10) 0.063 + 0.012 / - 0.004 (1.60 + 0.30 / - 0.10) 0.063 + 0.012 / - 0.004 (1.60 + 0.30 / - 0.10) 0.126 ± 0.012 (3.20 ± 0.30) 0.098 ± 0.008 (2.50 ± 0.20) 0.037 ± 0.004 (0.95 ± 0.10) 0.049 ± 0.004 (1.25 ± 0.10) 0.063 ± 0.008 (1.60 ± 0.20) 0.126 ± 0.016 (3.20 ± 0.40) 0.098 ± 0.012 (2.50 ± 0.30) 0.024 ± 0.008 (0.60 ± 0.20) 0.030 ± 0.010 (0.75 ± 0.25) 0.078 ± 0.008 (2.00 ± 0.20) 0.098 ± 0.012 (2.50 ± 0.30) Note (1) “R” = Reflow soldering process; “W” = Wave soldering process Revision: 14-Aug-2023 Document Number: 28548 4 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ....W1BC Basic Commodity Series www.vishay.com Vishay SELECTION CHART DIELECTRIC C0G (NP0) STYLE SIZE CODE VJ0402 VJ0603 VJ0805 0402 0603 0805 VJ1206 1206 VOLTAGE (VDC) 10 16 25 50 100 10 16 25 50 100 10 16 25 50 100 10 16 25 50 100 VOLTAGE CODE Q J X A B Q J X A B Q J X A B Q J X A B CAP. CODE CAP. 0R5 0.5 pF N N N N N S S S S S A A A A A 1R0 1.0 pF N N N N N S S S S S A A A A A 1R2 1.2 pF N N N N N S S S S S A A A A A 1R5 1.5 pF N N N N N S S S S S A A A A A B B B B B 1R8 1.8 pF N N N N N S S S S S A A A A A B B B B B 2R2 2.2 pF N N N N N S S S S S A A A A A B B B B B 2R7 2.7 pF N N N N N S S S S S A A A A A B B B B B 3R3 3.3 pF N N N N N S S S S S A A A A A B B B B B 3R9 3.9 pF N N N N N S S S S S A A A A A B B B B B 4R7 4.7 pF N N N N N S S S S S A A A A A B B B B B 5R6 5.6 pF N N N N N S S S S S A A A A A B B B B B 6R8 6.8 pF N N N N N S S S S S A A A A A B B B B B 8R2 8.2 pF N N N N N S S S S S A A A A A B B B B B 100 10 pF N N N N N S S S S S A A A A A B B B B B 120 12 pF N N N N N S S S S S A A A A A B B B B B 150 15 pF N N N N N S S S S S A A A A A B B B B B 180 18 pF N N N N N S S S S S A A A A A B B B B B 220 22 pF N N N N N S S S S S A A A A A B B B B B 270 27 pF N N N N N S S S S S A A A A A B B B B B 330 33 pF N N N N N S S S S S A A A A A B B B B B 390 39 pF N N N N N S S S S S A A A A A B B B B B 470 47 pF N N N N N S S S S S A A A A A B B B B B 560 56 pF N N N N N S S S S S A A A A A B B B B B 680 68 pF N N N N N S S S S S A A A A A B B B B B 820 82 pF N N N N N S S S S S A A A A A B B B B B 101 100 pF N N N N N S S S S S A A A A A B B B B B 121 120 pF N N N N N S S S S S A A A A A B B B B B 151 150 pF N N N N N S S S S S A A A A A B B B B B 181 180 pF N N N N N S S S S S A A A A A B B B B B 221 220 pF N N N N N S S S S S A A A A A B B B B B 271 270 pF N N N N S S S S S A A A A A B B B B B 331 330 pF N N N N S S S S S A A A A A B B B B B 391 390 pF N N N N S S S S S B B B B B B B B B B 471 470 pF N N N N S S S S S B B B B B B B B B B 561 560 pF N N N N S S S S S B B B B B B B B B B 681 680 pF N N N N S S S S S B B B B B B B B B B Notes • Letters indicate product thickness, see packaging quantities (1) Only in 5 % (code “J”) tolerance (2) Contact mlcc@vishay.com for availability Revision: 14-Aug-2023 Document Number: 28548 5 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ....W1BC Basic Commodity Series www.vishay.com Vishay SELECTION CHART DIELECTRIC C0G (NP0) STYLE SIZE CODE VJ0402 VJ0603 VJ0805 0402 0603 0805 VJ1206 1206 VOLTAGE (VDC) 10 16 25 50 100 10 16 25 50 100 10 16 25 50 100 10 16 25 50 100 VOLTAGE CODE Q J X A B Q J X A B Q J X A B Q J X A B CAP. CODE CAP. 821 820 pF N N N N S S S S S B B B B B B B B B B 102 1.0 nF N N N N S S S S S B B B B B B B B B B 122 1.2 nF X X X X X B B B B B B B B B B 152 1.5 nF X X X X X B B B B B B B B B B 182 1.8 nF X X X X B B B B B B B B B B 222 2.2 nF X X X X B B B B B B B B B B 272 2.7 nF X X X X D D D D D B B B B B 332 3.3 nF X X X X D D D D D B B B B B 392 3.9 nF D D D D D B B B B B 472 4.7 nF D D D D D B B B B B 562 5.6 nF D D D D B B B B B 682 6.8 nF D D D D C C C C C 822 8.2 nF D D D D D D D D D 103 10 nF D D D D D D D D D T (1) (1) (1) (1) (1) (1) 123 12 nF P P P 153 15 nF T (1) T (1) P P P (1) P (1) 183 18 nF T (1) T (1) P P P (1) P (1) 223 22 nF P P P (1) P (1) 273 27 nF P P P (1) P (1) 333 33 nF P P P (1) P (1) 393 39 nF P P P (1) P (1) 473 47 nF 563 56 nF 683 68 nF 823 82 nF 104 100 nF T T T P Notes • Letters indicate product thickness, see packaging quantities (1) Only in 5 % (code “J”) tolerance (2) Contact mlcc@vishay.com for availability Revision: 14-Aug-2023 Document Number: 28548 6 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ....W1BC Basic Commodity Series www.vishay.com Vishay SELECTION CHART DIELECTRIC STYLE VJ0402 SIZE CODE 0402 6.3 V 10 V 16 V 25 V 50 V 6.3 V VOLTAGE (VDC) VOLTAGE CODE Y Q J X A Y CAP. CODE CAP. 473 47 nF N 563 56 nF N 683 68 nF N N 823 82 nF N N N 104 100 nF N N N N N 124 120 nF 154 150 nF N N 184 180 nF 224 220 nF N N N N N 274 270 nF 334 330 nF N N 394 390 nF 474 470 nF N N E E E (2)(3) 564 560 nF 684 680 nF N N 824 820 nF X 105 1.0 μF N N N N X 155 1.5 μF X E (3) X 225 2.2 μF N N (3) E (3) 335 3.3 μF X 475 4.7 μF E (1) E (1)(3) E (1)(3) 106 10 μF E (1)(3) E (1)(3) X' 226 22 μF X' (1) 476 47 μF 686 68 μF 107 100 μF Notes • Letters indicate product thickness, see packaging quantities (1) Not in 10 % (code “K”) tolerance (2) Not in 20 % (code “M”) tolerance (3) Contact mlcc@vishay.com for availability X5R VJ0603 0603 10 V 16 V 25 V Q J X 50 V A 6.3 V Y VJ0805 0805 10 V 16 V 25 V Q J X 50 V A N X X X X X X X X X X X X X X X X X X X X X' X' X' (2)(3) X X' (1) X' (1)(3) X' X' (3) X' (2)(3) X' (1)(3) X X (2) X I I I I I I I I I I I I I I I I I I I I I (3) I (1)(3) I (1)(3) I (1)(3) I (1)(3) I (1)(3) I (3) I (3) I (3) SELECTION CHART DIELECTRIC STYLE SIZE CODE VOLTAGE (VDC) VOLTAGE CODE CAP. CODE CAP. 105 1.0 μF 155 1.5 μF 225 2.2 μF 335 3.3 μF 475 4.7 μF 685 6.8 μF 106 10 μF 226 22 μF 476 47 μF 107 100 μF 227 220 μF X5R 6.3 V Y P P P P P (3) P (1)(3) 10 V Q J J P P P P P P (3) VJ1206 1206 16 V J 25 V X 50 V A J J P P P P P P (2) K K K K P K K K P P (3) P P (2)(3) P K M M K M M (3) K M 4V S 6.3 V Y M M M (1) VJ1210 1210 10 V 16 V Q J 25 V X 50 V A M M (1)(3) M (1)(3) Notes • Letters indicate product thickness, see packaging quantities (1) Not in 10 % (code “K”) tolerance (2) Not in 20 % (code “M”) tolerance (3) Contact mlcc@vishay.com for availability Revision: 14-Aug-2023 Document Number: 28548 7 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ....W1BC Basic Commodity Series www.vishay.com Vishay SELECTION CHART DIELECTRIC STYLE VJ0402 SIZE CODE 0402 VOLTAGE (VDC) 6.3 V 10 V 16 V 25 V 50 V 100 V 10 V VOLTAGE CODE Y Q J X A B Q CAP. CODE CAP. 101 100 pF N N N N S (1) 121 120 pF N N N N S (1) 151 150 pF N N N N S (1) 181 180 pF N N N N S (1) 221 220 pF N N N N S (1) 271 270 pF N N N N S (1) 331 330 pF N N N N S (1) 391 390 pF N N N N S (1) 471 470 pF N N N N S 561 560 pF N N N N S 681 680 pF N N N N S 821 820 pF N N N N S 102 1.0 nF N N N N S 122 1.2 nF N N N N S 152 1.5 nF N N N N S 182 1.8 nF N N N N S 222 2.2 nF N N N N S 272 2.7 nF N N N N S 332 3.3 nF N N N N S 392 3.9 nF N N N N S 472 4.7 nF N N N N S 562 5.6 nF N N N N S 682 6.8 nF N N N N S 822 8.2 nF N N N N S 103 10 nF N N N N S 123 12 nF N N N S 153 15 nF N N N S 183 18 nF N N N S 223 22 nF N N N N (2) S 273 27 nF N N N S 333 33 nF N N N N (1) S 393 39 nF N N N S 473 47 nF N N N N (2) S 563 56 nF N N S 683 68 nF N N S 823 82 nF N N S 104 100 nF N N N E (2) S 124 120 nF S 154 150 nF S 184 180 nF S 224 220 nF N (2)(4) S 274 270 nF X 334 330 nF X 394 390 nF X 474 470 nF N (2) X 564 560 nF X 684 680 nF X 824 820 nF X 105 1.0 μF N (1) X 155 1.5 μF 225 2.2 μF X (1) 335 3.3 μF 475 4.7 μF 685 6.8 μF 106 10 μF 156 15 μF 226 22 μF 336 33 μF 476 47 μF 686 68 μF Notes • Letters indicate product thickness, see packaging quantities (1) Not in 5 % (code “J”) tolerance (2) Only in 10 % (code “K”) tolerance (3) Only in 20 % (code “M”) tolerance (4) Contact mlcc@vishay.com for availability Revision: 14-Aug-2023 X7R VJ0603 0603 16 V 25 V 50 V J X A S (1) S (1) S (1) S (1) S (1) S (1) S (1) S (1) S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S X X X X X X X X X’ (1) S (1) S (1) S (1) S (1) S (1) S (1) S (1) S (1) S S S S S S S S S S S S S S S S S S S S S S S S S S S S S X X X X X X X X S (1) S (1) S (1) S (1) S (1) S (1) S (1) S (1) S S S S S S S S S S S S S S S S S S S S S S X X X X X X X X (1) X (2)(4) X (2) X (2) 100 V B 10 V Q VJ0805 0805 16 V 25 V 50 V J X A S (1) S (1) S (1) S (1) S (1) S (1) S (1) S (1) S S S S S S S S S S S S S S S S S B (1) B (1) B (1) B (1) B (1) B (1) B (1) B (1) B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B D D D D D D D D D D D I I B (1) B (1) B (1) B (1) B (1) B (1) B (1) B (1) B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B D D D D D D D D D D D I (1) I B (1) B (1) B (1) B (1) B (1) B (1) B (1) B (1) B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B D D D D D D D D D D D I (1) I I (1) I (1) I (1) I (1) I (3)(4) X (2) X (2) X (2) B (1) B (1) B (1) B (1) B (1) B (1) B (1) B (1) B B B B B B B B B B B B B B B B B B B B B B B B B B B B B/D D D D D 100 V B B (1) B (1) B (1) B (1) B (1) B (1) B (1) B (1) B B B B B B B B B B B B B B B B B B B B B D D D D D D D D I (2) I I I (2) I (1) I (2)(4) Document Number: 28548 8 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ....W1BC Basic Commodity Series www.vishay.com Vishay SELECTION CHART DIELECTRIC STYLE VJ1206 SIZE CODE 1206 10 V 16 V 25 V VOLTAGE (VDC) VOLTAGE CODE Q J X CAP. CODE CAP. 101 100 pF 121 120 pF B (1) B (1) 151 150 pF B (1) 181 180 pF B (1) B (1) B (1) 221 220 pF B (1) B (1) B (1) 271 270 pF B (1) B (1) B (1) 331 330 pF B (1) B (1) B (1) 391 390 pF B (1) B (1) B (1) 471 470 pF B B B 561 560 pF B B B 681 680 pF B B B 821 820 pF B B B 102 1.0 nF B B B 122 1.2 nF B B B 152 1.5 nF B B B 182 1.8 nF B B B 222 2.2 nF B B B 272 2.7 nF B B B 332 3.3 nF B B B 392 3.9 nF B B B 472 4.7 nF B B B 562 5.6 nF B B B 682 6.8 nF B B B 822 8.2 nF B B B 103 10 nF B B B 123 12 nF B B B 153 15 nF B B B 183 18 nF B B B 223 22 nF B B B 273 27 nF B B B 333 33 nF B B B 393 39 nF B B B 473 47 nF B B B 563 56 nF B B B 683 68 nF B B B 823 82 nF B B B 104 100 nF B B B 124 120 nF B B B 154 150 nF C C C 184 180 nF C C C 224 220 nF C C C 274 270 nF C C C 334 330 nF C C C 394 390 nF C C J 474 470 nF J J J 564 560 nF J J J 684 680 nF J J J 824 820 nF J J J 105 1.0 μF J J J 155 1.5 μF J J P 225 2.2 μF J J P 335 3.3 μF P P P 475 4.7 μF P P P 685 6.8 μF P (1) 106 10 μF P P (1) 156 15 μF 226 22 μF P (1)(4) P (3)(4) 336 33 μF 476 47 μF 686 68 μF 107 100 μF Notes • Letters indicate product thickness, see packaging quantities (1) Not in 5 % (code “J”) tolerance (2) Only in 10 % (code “K”) tolerance (3) Only in 20 % (code “M”) tolerance (4) Contact mlcc@vishay.com for availability Revision: 14-Aug-2023 X7R 50 V A 100 V B B (1) B (1) B (1) B (1) B (1) B (1) B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B C C C D D P P P P P P B (1) B (1) B (1) B (1) B (1) B (1) B B B B B B B B B B B B B B B B B B B B B B B B B B B D D D G G G G G G G P P P P P (1) P (1) 6.3 V Y P (1) M (2)(4) 10 V Q VJ1210 1210 16 V 25 V J X 50 V A 100 V B C C C C C C C C C C C C C C C C C C C C C C C C C C D D D G G M M M K K K M M C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C D D D D C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C D D D D C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C D D D D C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C D D D D D D D G G (1) K (1) M (1) K K K (2) K M (1) K K K (1) M (1) M (2)(4) M (1)(4) M (1)(4) M (1)(4) Document Number: 28548 9 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ....W1BC Basic Commodity Series www.vishay.com Vishay PACKAGING QUANTITIES SIZE CODE (inch / mm) PAPER TAPE PLASTIC TAPE MAX. THICKNESS (mm) THICKNESS SYMBOL 7" REEL (C) 13" REEL (P) 0.55 N 10K 50K 0.70 E 10K 0.87 S 4K 15K 0.95 X 4K 15K 1.00 X' 4K 15K 0.75 A 4K 15K 0.95 B, T 4K 15K 1.40 7" REEL (T) 13" REEL (R) D 3K 10K 1.45 I 3K 10K 0.95 B 1.05 C 3K 10K 1.30 J 3K 10K 1.35 D 3K 10K 1.80 G 2K 1.90 P 2K 1.05 C 3K 10K 1.35 D 3K 10K 1.80 G 2K 2.20 K 1K 2.80 M 1K 0402 (1002) 0603 (1608) 0805 (2012) 4K 15K 1206 (3216) 1210 (3225) Revision: 14-Aug-2023 Document Number: 28548 10 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ....W1BC Basic Commodity Series www.vishay.com Vishay TAPE AND REEL SPECIFICATION P0 E A0 P0 T P2 T E D0 F P2 W F B0 D0 W 5° B0 P1 5° P1 D1 A0 K0 Dimensions of paper tape Dimensions of plastic tape DIMENSIONS PAPER TAPE in millimeters SIZE CODE 0402 0603 0805 1206 THICKNESS N E S, X, X' A B, T B A0 0.62 ± 0.05 0.70 ± 0.10 1.02 ± 0.05 1.50 ± 0.10 1.50 ± 0.10 2.00 ± 0.10 B0 1.12 ± 0.05 1.20 ± 0.10 1.80 ± 0.05 2.30 ± 0.10 2.30 ± 0.10 3.50 ± 0.10 T 0.60 ± 0.05 0.70 ± 0.10 0.95 ± 0.05 0.75 ± 0.05 0.95 ± 0.05 0.95 ± 0.05 K0 - - - - - - W 8.00 ± 0.10 8.00 ± 0.10 8.00 ± 0.10 8.00 ± 0.10 8.00 ± 0.10 8.00 ± 0.10 4.00 ± 0.10 P0 4.00 ± 0.10 4.00 ± 0.10 4.00 ± 0.10 4.00 ± 0.10 4.00 ± 0.10 10 x P0 40.0 ± 0.10 40.0 ± 0.10 40.0 ± 0.10 40.0 ± 0.10 40.0 ± 0.10 40.0 ± 0.10 P1 2.00 ± 0.05 2.00 ± 0.05 4.00 ± 0.10 4.00 ± 0.10 4.00 ± 0.10 4.00 ± 0.10 P2 2.00 ± 0.05 2.00 ± 0.05 2.00 ± 0.05 2.00 ± 0.05 2.00 ± 0.05 2.00 ± 0.05 D0 1.55 ± 0.05 1.55 ± 0.05 1.55 ± 0.05 1.55 ± 0.05 1.55 ± 0.05 1.50 ± 0.05 D1 - - - - - - E 1.75 ± 0.05 1.75 ± 0.05 1.75 ± 0.05 1.75 ± 0.05 1.75 ± 0.05 1.75 ± 0.10 F 3.50 ± 0.05 3.50 ± 0.05 3.50 ± 0.05 3.50 ± 0.05 3.50 ± 0.05 3.50 ± 0.05 DIMENSIONS PLASTIC TAPE in millimeters SIZE CODE 0805 THICKNESS D, I C, J, D 1206 G, P C, D 1210 G, K M A0 < 1.57 < 1.85 < 1.95 < 2.97 < 2.97 < 2.97 B0 < 2.40 < 3.46 < 3.67 < 3.73 < 3.73 < 3.73 T 0.23 ± 0.05 0.23 ± 0.05 0.23 ± 0.05 0.23 ± 0.05 0.23 ± 0.05 0.23 ± 0.05 K0 < 2.50 < 2.50 < 2.50 < 2.50 < 2.50 < 3.00 W 8.00 ± 0.10 8.00 ± 0.10 8.00 ± 0.10 8.00 ± 0.10 8.00 ± 0.10 8.00 ± 0.10 4.00 ± 0.10 P0 4.00 ± 0.10 4.00 ± 0.10 4.00 ± 0.10 4.00 ± 0.10 4.00 ± 0.10 10 x P0 40.0 ± 0.10 40.0 ± 0.10 40.0 ± 0.10 40.0 ± 0.10 40.0 ± 0.10 40.0 ± 0.10 P1 4.00 ± 0.10 4.00 ± 0.10 4.00 ± 0.10 4.00 ± 0.10 4.00 ± 0.10 4.00 ± 0.10 P2 2.00 ± 0.05 2.00 ± 0.05 2.00 ± 0.05 2.00 ± 0.05 2.00 ± 0.05 2.00 ± 0.05 D0 1.50 ± 0.05 1.50 ± 0.05 1.50 ± 0.05 1.50 ± 0.05 1.50 ± 0.05 1.50 ± 0.05 D1 1.00 ± 0.10 1.00 ± 0.10 1.00 ± 0.10 1.00 ± 0.10 1.00 ± 0.10 1.00 ± 0.10 E 1.75 ± 0.10 1.75 ± 0.10 1.75 ± 0.10 1.75 ± 0.10 1.75 ± 0.10 1.75 ± 0.10 F 3.50 ± 0.05 3.50 ± 0.05 3.50 ± 0.05 3.50 ± 0.05 3.50 ± 0.05 3.50 ± 0.05 Revision: 14-Aug-2023 Document Number: 28548 11 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ....W1BC Basic Commodity Series www.vishay.com Vishay REEL SPECIFICATION REEL DIMENSIONS in millimeters SYMBOL 7" REEL 13" REEL A 13.0 ± 0.5 13.0 ± 0.5 D C A B 9.0 ± 1.0 9.0 ± 1.0 C 178.0 ± 1.0 330.0 ± 1.0 D 60.0 ± 1.0 100.0 ± 1.0 B CONSTRUCTION NO. NAME C0G (NP0) X5R / X7R 1 Ceramic material CaZrO3 based BaTiO3 based 2 Inner electrode Ni 3 Inner layer 4 Termination 5 Cu Middle layer Ni Outer layer Sn (matt) 3 4 5 1 2 STORAGE AND HANDLING CONDITIONS (1) To store products at 5 °C to 40 °C ambient temperature and 20 % to 70 % relative humidity conditions. (2) The product is recommended to be used within one year after shipment. Check solderability in case of shelf life extension is needed. Cautions: a. The corrosive gas reacts on the terminal electrodes of capacitors, and results in the poor solderability. Do not store the capacitors in the ambience of corrosive gas (e.g., hydrogen sulfide, sulfur dioxide, chlorine, ammonia gas etc.) b. In corrosive atmosphere, solderability might be degraded, and silver migration might occur to cause low reliability. c. Due to the dewing by rapid humidity change, or the photochemical change of the terminal electrode by direct sunlight, the solderability and electrical performance may deteriorate. Do not store capacitors under direct sunlight or dewing condition. To store products on the shelf and avoid exposure to moisture. Revision: 14-Aug-2023 Document Number: 28548 12 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2023 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2023 1 Document Number: 91000