VJ1206A181KLCAJ32

VJ....32 Lead-Bearing Finish MLCCs www.vishay.com Vishay Vitramon Surface Mount Multilayer Ceramic Chip Capacitors With Lead-Bearing Finish Termination FEATURES • Tin / lead termination finish - minimum 4 % lead • Available in 0402 to 1210 body size • Two dielectrics • High operating temperature, high reliability • Wet build process • Reliable Noble Metal Electrode (NME) system • AEC-Q200 qualified with PPAP available • Custom combinations to meet specific need • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS • • • • • • Low earth orbit satellites (LEO) Space Aerospace Avionic Military Tin whisker mitigation ELECTRICAL SPECIFICATIONS C0G (NP0) DIELECTRIC (1) X7R DIELECTRIC GENERAL SPECIFICATION GENERAL SPECIFICATION Note Electrical characteristics at +25 °C unless otherwise specified Note Electrical characteristics at +25 °C unless otherwise specified Operating Temperature: -55 °C to +150 °C (above +125 °C changed characteristics) Operating Temperature: -55 °C to +150 °C (above +125 °C changed characteristics) Capacitance Range: 1 pF to 15 nF Capacitance Range: 120 pF to 1 μF Voltage Range: 25 VDC to 630 VDC Voltage Range: 16 VDC to 630 VDC Temperature Coefficient of Capacitance (TCC): 0 ppm/°C ± 30 ppm/°C from -55 °C to +125 °C Temperature Coefficient of Capacitance (TCC): ± 15 % from -55 °C to +125 °C, with 0 VDC applied Dissipation Factor (DF): 0.1 % maximum at 1.0 VRMS and 1 MHz for values ≤ 1000 pF 0.1 % maximum at 1.0 VRMS and 1 kHz for values > 1000 pF Dissipation Factor (DF): 16 V, 25 V ratings: 3.5 % maximum at 1.0 VRMS and 1 kHz > 25 V ratings: 2.5 % maximum at 1.0 VRMS and 1 kHz Insulating Resistance: at +25 °C 100 000 MΩ min. or 1000 ΩF whichever is less at +125 °C 10 000 MΩ min. or 100 ΩF whichever is less Aging: 0 % maximum per decade Dielectric Strength Test: performed per method 103 of EIA 198-2-E. Applied test voltages ≤ 250 VDC-rated: 250 % of rated voltage 500 VDC-rated: 200 % of rated voltage 630 VDC-rated: 150 % of rated voltage Insulating Resistance: at +25 °C 100 000 MΩ min. or 1000 ΩF whichever is less at +125 °C 10 000 MΩ min. or 100 ΩF whichever is less Aging Rate: 1 % maximum per decade Dielectric Strength Test: performed per method 103 of EIA 198-2-E. Applied test voltages 250 % of rated voltage ≤ 250 VDC-rated: 500 VDC-rated: min. 150 % of rated voltage 630 VDC-rated: min. 120 % of rated voltage Note (1) Under qualification; contact factory for availability Revision: 01-Mar-2022 Document Number: 45256 1 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ....32 Lead-Bearing Finish MLCCs www.vishay.com Vishay Vitramon QUICK REFERENCE DATA DIELECTRIC 0402 0603 0805 1206 1210 0402 0603 0805 1206 1210 C0G (NP0) X7R CAPACITANCE MAXIMUM VOLTAGE (V) 100 200 500 630 630 100 200 200 630 630 CASE CODE MINIMUM 1.0 pF 1.0 pF 1.0 pF 1.0 pF 100 pF 120 pF 330 pF 330 pF 220 pF 390 pF MAXIMUM 220 pF 820 pF 3.9 nF 8.2 nF 12 nF 33 nF 150 nF 470 nF 1.0 μF 1.0 μF Note • Detail ratings see “Selection Chart” ORDERING INFORMATION VJ0805 Y 102 K L CASE CODE DIELECTRIC CAPACITANCE NOMINAL CODE CAPACITANCE TOLERANCE 0402 0603 0805 1206 1210 A, D = Expressed in B = ± 0.10 pF C0G (NP0) (2) picofarads (pF). C = ± 0.25 pF Y = X7R The first two D = ± 0.5 pF digits are F=±1% significant, the G=±2% third is a J=±5% multiplier. An K = ± 10 % “R” indicates a M = ± 20 % decimal point. Note Examples C0G (NP0): 4R7 = 4.7 pF B, C, D < 10 pF 102 = 1000 pF F, G, J, K ≥ 10 pF X7R: J, K, M A TERMINATION DC VOLTAGE RATING (1) L = Ni barrier with tin lead plated finish min. 4 % lead J = 16 V X = 25 V A = 50 V B = 100 V C = 200 V P = 250 V E = 500 V L = 630 V A C 32 MARKING PACKAGING PROCESS CODE A = unmarked 32 = AEC-Q200 qualified with tin / lead termination finish T = 7" reel / plastic tape C = 7" reel / paper tape J = 7" reel (low quantity) R = 11 1/4" / 13" reel / plastic tape P = 11 1/4" / 13" reel / paper tape Notes (1) DC voltage rating should not be exceeded in application. Other application factors may affect the MLCC performance. Consult for questions: mlcc@vishay.com (2) Consult Selection Chart table for correct dielectric code DIMENSIONS in inches (millimeters) W L T P CASE CODE STYLE 0402 VJ0402 0603 VJ0603 0805 VJ0805 1206 VJ1206 1210 VJ1210 Revision: 01-Mar-2022 LENGTH (L) WIDTH (W) 0.040 + 0.004 / - 0.002 (1.00 + 0.10 / - 0.05) 0.063 ± 0.006 (1.60 ± 0.15) 0.079 ± 0.008 (2.00 ± 0.20) 0.126 ± 0.010 (3.20 ± 0.25) 0.126 ± 0.010 (3.20 ± 0.25) 0.020 + 0.004 / - 0.002 (0.50 + 0.10 / - 0.05) 0.031 ± 0.006 (0.80 ± 0.15) 0.049 ± 0.008 (1.25 ± 0.20) 0.063 ± 0.010 (1.60 ± 0.25) 0.098 ± 0.010 (2.50 ± 0.25) MAXIMUM THICKNESS (T) 0.024 (0.60) 0.038 (0.97) 0.057 (1.45) 0.067 (1.70) 0.076 (1.94) TERMINATIONS PAD (P) MINIMUM MAXIMUM 0.004 0.016 (0.10) (0.41) 0.012 0.024 (0.30) (0.60) 0.010 0.028 (0.25) (0.71) 0.010 0.028 (0.25) (0.71) 0.010 0.028 (0.25) (0.71) Document Number: 45256 2 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ....32 Lead-Bearing Finish MLCCs www.vishay.com Vishay Vitramon SELECTION CHART DIELECTRIC C0G (NP0) STYLE VJ0402 VJ0603 VJ0805 0402 0603 0805 CASE CODE VOLTAGE (VDC) 25 / 50 100 50 100 200 50 100 200 500 VOLTAGE CODE X/A B A B C A B C E CAP. CODE CAP. 1R0 1.0 pF •• •• •• •• •• •• •• •• •• 1R2 1.2 pF •• •• •• •• •• •• •• •• •• 1R5 1.5 pF •• •• •• •• •• •• •• •• •• 1R8 1.8 pF •• •• •• •• •• •• •• •• •• 2R2 2.2 pF •• •• •• •• •• •• •• •• •• 2R7 2.7 pF •• •• •• •• •• •• •• •• •• 3R3 3.3 pF •• •• •• •• •• •• •• •• •• 3R9 3.9 pF •• •• •• •• •• •• •• •• •• 4R7 4.7 pF •• •• •• •• •• •• •• •• •• 5R6 5.6 pF •• •• •• •• •• •• •• •• •• 6R8 6.8 pF •• •• •• •• •• •• •• •• •• 8R2 8.2 pF •• •• •• •• •• •• •• •• •• 100 10 pF •• •• •• •• •• •• •• •• •• 120 12 pF •• •• •• •• •• •• •• •• •• 150 15 pF •• •• •• •• •• •• •• •• •• 180 18 pF •• •• •• •• •• •• •• •• •• 220 22 pF •• •• •• •• •• •• •• •• •• 270 27 pF •• •• •• •• •• •• •• •• •• 330 33 pF •• •• •• •• •• •• •• •• •• 390 39 pF •• •• •• •• •• •• •• •• •• 470 47 pF •• •• •• •• •• •• •• •• •• 560 56 pF •• •• •• •• •• •• •• •• •• 680 68 pF •• •• •• •• •• •• •• •• •• 820 82 pF •• •• •• •• •• •• •• •• •• 101 100 pF •• •• •• •• •• •• •• •• •• 121 120 pF •• •• •• •• •• •• •• •• •• 151 150 pF •• •• •• •• •• •• •• •• 181 180 pF •• •• •• • •• •• •• •• 221 220 pF •• •• •• • •• •• •• • 271 270 pF •• •• • •• •• •• • 331 330 pF •• •• •• •• •• • 391 390 pF •• •• •• •• •• • 471 470 pF •• •• •• •• • • 561 560 pF •• •• •• • 681 680 pF •• •• •• • 821 820 pF •• •• •• • Notes •• Paper tape, • Plastic tape These values use dielectric code “D”. All other NP0 (C0G) part numbers use dielectric code “A” Revision: 01-Mar-2022 Document Number: 45256 3 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ....32 Lead-Bearing Finish MLCCs www.vishay.com Vishay Vitramon SELECTION CHART DIELECTRIC C0G (NP0) STYLE VJ0402 VJ0603 VJ0805 0402 0603 0805 CASE CODE VOLTAGE (VDC) 25 / 50 100 50 100 200 50 100 200 500 VOLTAGE CODE X/A B A B C A B C E • CAP. CODE CAP. 102 1.0 nF •• •• 122 1.2 nF •• • 152 1.5 nF •• • 182 1.8 nF • • 222 2.2 nF • 272 2.7 nF • 332 3.3 nF • 392 3.9 nF • 472 4.7 nF 562 5.6 nF 682 6.8 nF 822 8.2 nF 103 10 nF 123 12 nF 153 15 nF 183 18 nF 223 22 nF 273 27 nF 333 33 nF 393 39 nF 473 47 nF 563 56 nF Note •• Paper tape, • Plastic tape Revision: 01-Mar-2022 Document Number: 45256 4 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ....32 Lead-Bearing Finish MLCCs www.vishay.com Vishay Vitramon SELECTION CHART DIELECTRIC C0G (NP0) STYLE VJ1206 CASE CODE VJ1210 1206 1210 VOLTAGE (VDC) 50 100 200 500 / 630 50 100 200 500 / 630 VOLTAGE CODE A B C E/L A B C E/L CAP. CODE CAP. 1R0 1.0 pF •• •• •• •• 1R2 1.2 pF •• •• •• •• 1R5 1.5 pF •• •• •• •• 1R8 1.8 pF •• •• •• •• 2R2 2.2 pF •• •• •• •• 2R7 2.7 pF •• •• •• •• 3R3 3.3 pF •• •• •• •• 3R9 3.9 pF •• •• •• •• 4R7 4.7 pF •• •• •• •• 5R6 5.6 pF •• •• •• •• 6R8 6.8 pF •• •• •• •• 8R2 8.2 pF •• •• •• •• 100 10 pF •• •• •• •• 120 12 pF •• •• •• •• 150 15 pF •• •• •• •• 180 18 pF •• •• •• •• 220 22 pF •• •• •• •• 270 27 pF •• •• •• •• 330 33 pF •• •• •• •• 390 39 pF •• •• •• •• 470 47 pF •• •• •• •• 560 56 pF •• •• •• •• 680 68 pF •• •• •• •• 820 82 pF •• •• •• •• 101 100 pF • • • • • • • • 121 120 pF • • • • • • • • 151 150 pF • • • • • • • • 181 180 pF • • • • • • • • 221 220 pF • • • • • • • • 271 270 pF • • • • • • • • 331 330 pF • • • • • • • • 391 390 pF • • • • • • • • 471 470 pF • • • • • • • • 561 560 pF • • • • • • • • 681 680 pF • • • • • • • • 821 820 pF • • • • • • • • Notes •• Paper tape, • Plastic tape These values use dielectric code “D”. All other NP0 (C0G) part numbers use dielectric code “A” Revision: 01-Mar-2022 Document Number: 45256 5 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ....32 Lead-Bearing Finish MLCCs www.vishay.com Vishay Vitramon SELECTION CHART DIELECTRIC C0G (NP0) STYLE VJ1206 CASE CODE VJ1210 1206 1210 VOLTAGE (VDC) 50 100 200 500 / 630 50 100 200 500 / 630 VOLTAGE CODE A B C E/L A B C E/L • CAP. CODE CAP. 102 1.0 nF • • • • • • • 122 1.2 nF • • • • • • • 152 1.5 nF • • • • • • • 182 1.8 nF • • • • • • • 222 2.2 nF • • • • • • 272 2.7 nF • • • • • • 332 3.3 nF • • • • • • 392 3.9 nF • • • • • 472 4.7 nF • • • • • 562 5.6 nF • • • • • 682 6.8 nF • • • • • 822 8.2 nF • • • • • 103 10 nF • • 123 12 nF • • 153 15 nF 183 18 nF 223 22 nF 273 27 nF 333 33 nF 393 39 nF 473 47 nF 563 56 nF Note •• Paper tape, • Plastic tape Revision: 01-Mar-2022 Document Number: 45256 6 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ....32 Lead-Bearing Finish MLCCs www.vishay.com Vishay Vitramon SELECTION CHART DIELECTRIC X7R STYLE VJ0402 VJ0603 VJ0805 0402 0603 0805 CASE CODE VOLTAGE (VDC) VOLTAGE CODE 16 25 50 100 16 25 50 100 200 16 25 50 100 200 J X A B J X A B C J X A B C CAP. CODE CAP. 121 120 pF •• •• •• •• 151 150 pF •• •• •• •• 181 180 pF •• •• •• •• 221 220 pF •• •• •• •• 271 270 pF •• •• •• •• 331 330 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •• 391 390 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •• 471 470 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •• 561 560 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •• 681 680 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •• 821 820 pF •• •• •• •• •• •• •• •• •• •• •• •• •• •• 102 1.0 nF •• •• •• •• •• •• •• •• •• •• •• •• •• •• 122 1.2 nF •• •• •• •• •• •• •• •• •• •• •• •• •• •• 152 1.5 nF •• •• •• •• •• •• •• •• •• •• •• •• •• •• 182 1.8 nF •• •• •• •• •• •• •• •• •• •• •• •• •• •• 222 2.2 nF •• •• •• •• •• •• •• •• •• •• •• •• •• •• 272 2.7 nF •• •• •• •• •• •• •• •• •• •• •• •• •• •• 332 3.3 nF •• •• •• •• •• •• •• •• •• •• •• •• •• •• 392 3.9 nF •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• •• 472 4.7 nF •• •• •• •• •• •• •• •• •• •• •• •• 562 5.6 nF •• •• •• •• •• •• •• •• •• •• •• •• 682 6.8 nF •• •• •• •• •• •• •• •• •• •• •• •• 822 8.2 nF •• •• •• •• •• •• •• •• •• •• •• •• 103 10 nF •• •• •• •• •• •• •• •• •• •• •• •• 123 12 nF •• •• •• •• •• •• •• •• •• •• • 153 15 nF •• •• •• •• •• •• •• •• •• •• • 183 18 nF •• •• •• •• •• •• •• •• •• •• • 223 22 nF •• •• •• •• •• •• •• •• •• • 273 27 nF •• •• •• •• •• •• •• •• •• • 333 33 nF •• •• •• •• •• •• •• •• •• •• 393 39 nF •• •• •• •• •• 473 47 nF •• •• •• •• •• 563 56 nF •• •• •• •• •• 683 68 nF •• •• •• • • • • • 823 82 nF •• •• •• • • • • Note •• Paper tape, • Plastic tape Revision: 01-Mar-2022 Document Number: 45256 7 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ....32 Lead-Bearing Finish MLCCs www.vishay.com Vishay Vitramon SELECTION CHART DIELECTRIC X7R STYLE VJ0402 VJ0603 VJ0805 0402 0603 0805 CASE CODE VOLTAGE (VDC) VOLTAGE CODE CAP. CODE 16 25 50 100 16 25 50 100 200 16 25 50 100 200 J X A B J X A B C J X A B C •• •• • CAP. 104 100 nF •• • • • 124 120 nF • • • • 154 150 nF • • • • 184 180 nF • • 224 220 nF • • 274 270 nF • • 334 330 nF • • 394 390 nF • 474 470 nF • 564 560 nF 684 680 nF 824 820 nF 105 1.0 μF 125 1.2 μF 155 1.5 μF 185 1.8 μF 225 2.2 μF 275 2.7 μF 335 3.3 μF 395 3.9 μF 475 4.7 μF 565 5.6 μF 685 6.8 μF Note •• Paper tape, • Plastic tape Revision: 01-Mar-2022 Document Number: 45256 8 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ....32 Lead-Bearing Finish MLCCs www.vishay.com Vishay Vitramon SELECTION CHART DIELECTRIC X7R STYLE CASE CODE VOLTAGE (VDC) VOLTAGE CODE VJ1206 VJ1210 1206 1210 16 25 50 100 200 500 / 630 16 25 50 100 200 500 / 630 J X A B C E/L J X A B C E/L CAP. CODE CAP. 121 120 pF 151 150 pF 181 180 pF 221 220 pF • 271 270 pF • 331 330 pF • 391 390 pF • • 471 470 pF • • 561 560 pF • • 681 680 pF 821 820 pF 102 1.0 nF • 122 1.2 nF • 152 1.5 nF 182 222 272 2.7 nF • • • • • • • • 332 3.3 nF • • • • • • • • 392 3.9 nF • • • • • • • • 472 4.7 nF • • • • • • • • 562 5.6 nF • • • • • • • • 682 6.8 nF • • • • • • • • 822 8.2 nF • • • • • • • • 103 10 nF • • • • • • • • • • • • 123 12 nF • • • • • • • • • • • • 153 15 nF • • • • • • • • • • • • 183 18 nF • • • • • • • • • • • • 223 22 nF • • • • • • • • • • • 273 27 nF • • • • • • • • • • • 333 33 nF • • • • • • • • • • • 393 39 nF • • • • • • • • • • • 473 47 nF • • • • • • • • • • 563 56 nF • • • • • • • • • • 683 68 nF • • • • • • • • • • 823 82 nF • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 1.8 nF • • • • • • 2.2 nF • • • • • • • • • Note • Plastic tape Revision: 01-Mar-2022 Document Number: 45256 9 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ....32 Lead-Bearing Finish MLCCs www.vishay.com Vishay Vitramon SELECTION CHART DIELECTRIC X7R STYLE CASE CODE VOLTAGE (VDC) VOLTAGE CODE CAP. CODE VJ1206 VJ1210 1206 1210 16 25 50 100 200 500 / 630 16 25 50 100 200 500 / 630 J X A B C E/L J X A B C E/L CAP. 104 100 nF • • • • • • • • • • 124 120 nF • • • • • • • • • • 154 150 nF • • • • • • • • • 184 180 nF • • • • • • • • • 224 220 nF • • • • • • • • 274 270 nF • • • • • • • • 334 330 nF • • • • • • • 394 390 nF • • • • • • • 474 470 nF • • • • • • • 564 560 nF • • • • • 684 680 nF • • • • • 824 820 nF • • • • • 105 1.0 μF • • • • • 125 1.2 μF 155 1.5 μF 185 1.8 μF 225 2.2 μF 275 2.7 μF 335 3.3 μF 395 3.9 μF 475 4.7 μF 565 5.6 μF 685 6.8 μF Note • Plastic tape Revision: 01-Mar-2022 Document Number: 45256 10 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ....32 Lead-Bearing Finish MLCCs www.vishay.com Vishay Vitramon STANDARD PACKAGING QUANTITIES (1)(2) 7" REEL QUANTITIES CASE CODE TAPE SIZE 11 1/4" AND 13" REEL QUANTITIES PAPER TAPE PLASTIC TAPE LOW QUANTITY PAPER TAPE PLASTIC TAPE PACKAGING CODE PACKAGING CODE PACKAGING CODE PACKAGING CODE PACKAGING CODE “C” “T” “J” “P” “R” 0402 8 mm 5000 n/a 1000 10 000 n/a 0603 8 mm 4000 4000 1000 10 000 10 000 0805 8 mm 3000 3000 1000 10 000 10 000 1206 (3) 8 mm 3000 2500 / 3000 1000 10 000 9000 / 10 000 1210 (3) 8 mm n/a 2000 / 2500 / 3000 1000 n/a 9000 / 10 000 Notes (1) Reference: EIA standard RS 481 - “Taping of Surface Mount Components for Automatic Placement” (2) n/a = not available (3) Packaging quantity can depend from product thickness Revision: 01-Mar-2022 Document Number: 45256 11 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ....32 Lead-Bearing Finish MLCCs www.vishay.com Vishay Vitramon 1 - GENERAL CERTIFICATES # Quality management system according to IATF 16949 Yes # Quality management system according to ISO 9001 Yes # Environmental certification according to ISO 14001 Yes # Health and safety system according to ISO 45001 Yes 2 - TECHNICAL REQUIREMENTS Unless specified in component specification, these parameters are the minimum requirements for the components. 2.1 OPERATING TEMPERATURE RANGE For standard applications TA: -55 °C to +125 °C See characteristics 2.2 For high temperature applications TA: -55 °C to +150 °C See characteristics 2.2 For ultra high temperature applications TA: -55 °C to +175 °C See characteristics 2.2 2.2 CHARACTERISTICS PARAMETER Rated voltage in temperature range -55 °C to +125 °C CERAMIC TYPE C0G (NP0) X7R SYMBOL UR C0G (NP0) 25 V to 630 V 16 V to 630 V 25 V to 100 V UDC ≤ 1/2 UR X7R 16 V to 100 V UDC ≤ 1/4 UR for VJ0603Y104*A (100 nF / 50 V) C0G (NP0) 25 V to 100 V UDC ≤ 1/4 UR X7R 16 V to 100 V UDC ≤ 1/4 UR if CR < 10 pF: αC ≤ ± 120 ppm/°C Temperature coefficient in temperature range -55 °C to +125 °C C0G (NP0) αC ≤ ± 30 ppm/°C X7R ΔC + 15 % / - 30 % Temperature coefficient in temperature range -55 °C to +150 °C C0G (NP0) αC ≤ ± 30 ppm/°C X7R ΔC + 15 % / - 30 % X7R ΔC + 15 % / - 50 % Temperature coefficient in temperature range -55 °C to +175 °C Dissipation factor in temperature range -55 °C to +175 °C TEST CONDITIONS / REMARKS UDC ≤ 1/2 UR Derating at higher temperature up to +150 °C Derating at higher temperature up to +175 °C RATINGS C0G (NP0) X7R tan δ if CR < 10 pF: αC ≤ ± 120 ppm/°C ≤ 0.0015 ≤ 0.06 2.3 STORAGE AND HANDLING CONDITIONS (1) Store the components at 5 °C to 40 °C ambient temperature and ≤ 70 % relative humidity conditions. (2) The product is recommended to be used within a time-frame of 2 years after shipment. Check solderability in case extended shelf life beyond the expiry date is needed. Precautions: a. Do not store products in an environment containing corrosive elements, especially where chloride gas, sulfide gas, acid, alkali, salt, or the like are present. This may cause corrosion or oxidization of the terminations, which can easily lead to poor soldering. b. Store products on the shelf and avoid exposure to moisture or dust. c. Do not expose products to excessive shock, vibration, direct sunlight, and so on. Revision: 01-Mar-2022 Document Number: 45256 12 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ....32 Lead-Bearing Finish MLCCs www.vishay.com Vishay Vitramon C0G (NP0) DIELECTRIC - TYPICAL PARAMETERS Temperature Dependence of Capacitance Insulation Resistance vs. Temperature 10000 10 000 10000 0.6 100 -0.2 -0.4 -50 0 50 100 1000 100 100 10 10 10 -0.6 1000 1st line 2nd line 0 2nd line Insulation Resistance (ΩF) 1000 0.2 1st line 2nd line 2nd line Capacitance Change (%) 0.4 10 150 25 Aging Rate 0.2 1000 0 100 -0.1 -0.2 100 1000 10 10 000 10000 0.1 1000 1st line 2nd line 0.1 2nd line Capacitance Change (%) 10000 1st line 2nd line 2nd line Capacitance Change (%) 150 Voltage Coefficient of Capacitance 0.2 10 100 Temperature (°C) Temperature (°C) 1 50 0 100 -0.1 10 -0.2 0 Hours 10 20 30 40 50 60 70 80 90 100 Applied DC Voltage (VDC) Change of Capacitance with Frequency 10000 1 1000 1st line 2nd line 2nd line Capacitance Change (%) 2 0 100 -1 -2 1 10 100 10 1000 Frequency (kHz) Revision: 01-Mar-2022 Document Number: 45256 13 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ....32 Lead-Bearing Finish MLCCs www.vishay.com Vishay Vitramon X7R DIELECTRIC - TYPICAL PARAMETERS Temperature Coefficient of Capacitance Minimum Insulation Resistance vs. Temperature 10000 10 000 10000 15 -5 -10 100 -15 -20 1000 1000 100 100 1st line 2nd line 1000 0 2nd line Insulation Resistance (ΩF) 5 1st line 2nd line 2nd line Capacitance Change (%) 10 -25 -75 -50 -25 0 10 10 10 -30 20 25 50 75 100 125 150 175 40 60 100 120 140 160 180 Temperature (°C) Temperature (°C) Aging Rate Dissipation Factor vs. Temperature 6.0 80 10000 1 10000 5.5 1000 3.5 3.0 2.5 2.0 100 1.5 1.0 0 1000 -1 1st line 2nd line 4.0 2nd line Capacitance Change (%) 4.5 1st line 2nd line 2nd line Dissipation Factor (%) 5.0 -2 100 -3 0.5 -75 -50 -25 0 1 25 50 75 100 125 150 175 10 100 1000 Hours Temperature (°C) Rated Voltage vs. Temperature (1) Voltage Coefficient of Capacitance 10000 5 10000 200 100 100 50 -5 1000 1st line 2nd line 1000 150 2nd line Capacitance Change (%) 0 1st line 2nd line 2nd line Rated Voltage (%) 10 10 000 -4 10 0 -10 25 V rated -15 50 V rated -25 10 0 -75 -50 -25 0 25 50 75 100 125 150 175 Temperature (°C) 100 -20 100 V rated 10 -30 0 10 20 30 40 50 60 70 80 90 100 Applied DC Voltage (VDC) Note (1) Except for VJ0603Y104*A (100 nF / 50 V), see section “2.2 Characteristics” Revision: 01-Mar-2022 Document Number: 45256 14 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ....32 Lead-Bearing Finish MLCCs www.vishay.com Vishay Vitramon X7R DIELECTRIC - TYPICAL PARAMETERS Dissipation Factor vs. Voltage Dissipation Factor vs. Voltage 0.020 0.020 10000 100 V 100 50 V 0.008 1000 1st line 2nd line 0.012 2nd line Dissipation Factor 0.016 1000 1st line 2nd line 2nd line Dissipation Factor 0.016 10000 0.012 100 0.008 500 V / 630 V 200 V 10 0.004 0 10 20 30 40 50 60 70 80 10 0.004 90 100 0 Applied DC Voltage (VDC) 100 100 Frequency (kHz) Revision: 01-Mar-2022 10 1000 500 600 700 10000 15 1000 1st line 2nd line 2nd line Dissipation Factor (%) 1st line 2nd line 2nd line Capacitance Change (%) -10 10 400 Change of Dissipation Factor with Frequency 1000 1 300 20 10000 -20 200 Applied DC Voltage (VDC) Change of Capacitance with Frequency 0 100 10 100 5 0 1 10 100 10 1000 Frequency (kHz) Document Number: 45256 15 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ....32 Lead-Bearing Finish MLCCs www.vishay.com Vishay Vitramon 3 - LOT ACCEPTANCE TESTS Process tests available in classes (on request) GROUP ACTION A Components are tested within the monitoring program of the supplier. The supplier shall submit the part numbers of the selected component to the customer during the component specification discussions. B Components (customer P/N) shall be tested quarterly. Records available only on special request by the customer. C Test with each shipment. Records are provided on a monthly basis. Customer special requirement; requirement should be determined in a specific component specification. Upon request the records can be submitted in electronic format on monthly basis. 3.1 THERMAL STRENGTH, THERMAL SHOCK SENSIBILITY Sample size 200 Handling Mounted on PCB Thermal shock 1 x 280 °C, no pre-heat, 5 s to 10 s IR - test (IRATS) U = UR, T = room temperature, verified Burn in (BIATS) Equivalent to 12 h burn-in, 2 x UR/125 °C, verification time to failure Acceptance criteria: zero defects (IRATS and BIATS). 3.2 BOARD FLEX TEST Sample size 20 pcs/lot Frequency At least three different part numbers of one component family matrix per quarter Max. deflection 8 mm (data to be reported, available on request) 3.3 SOLDERABILITY / RESISTANCE TO SOLDERING HEAT Temperature profile for reflow soldering of SMD parts IPC/JEDEC-J-STD-020C. Test is done on a regular basis for samples taken randomly out of the line. Acceptance criteria: at least 95 % new solder and no detachment or leaching of terminations. 4 - ENVIRONMENTAL REQUIREMENTS A list of the chemical substances content, which must not be used or whose use shall be limited by international law, is available on request. Revision: 01-Mar-2022 Document Number: 45256 16 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ....32 Lead-Bearing Finish MLCCs www.vishay.com Vishay Vitramon 5 - INSPECTION CRITERIA The supplier shall carry out visual examination with suitable equipment with approximately 10 x magnification and lighting appropriate to the specimen under test and the required quality level. Chipping The components shall be free of cracks or fissures. Small damages which do not deteriorate the performance of the component shall be less than 50 % of the surface of the MLCC as defined in EIA 595. Delamination or Exposed Electrodes No visible separation or delamination between layers of the capacitor and no exposed electrodes between the two terminals of the capacitor must be seen. Metallization For the metallization, no visible detachment of the metallized terminals and no exposed electrodes must be seen. Defects and gaps in the metallization on each sides of the terminal must not exceed 10 % of the total area (e.g. A, B, C, …). Leaching shall not exceed 25 %. A B C Electrode Distance The ceramic body shall be free of any conducting material between the terminals which reduces the distance of the electrodes. The minimum distance “D” is 400 μm for all package sizes, except 0402. For the component package 0402 the minimum distance is 200 μm. D Revision: 01-Mar-2022 Document Number: 45256 17 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ....32 Lead-Bearing Finish MLCCs www.vishay.com Vishay Vitramon 6 - BOARD FLEX TEST CONDITIONS 6.1 BOARD FLEX DEFINITIONS OF TEST PCB thickness = (1.6 ± 0.1) mm Copper thickness = 35 μm Material FR4 (EP-GC 02 according to DIN 40 802) LAYOUT / PAD DESIGN (Dimensions in mm) PAD SIZE CASE CODE LL LB LEL 0603 2.20 1.00 0.75 0805 3.40 1.30 1.20 1206 4.50 1.80 1.20 1210 4.50 2.80 1.30 LB Note • LL = total length; LB = width of the pad; LEL = single pad length LEL LL 6.2 SOLDERING INSTRUCTIONS THICKNESS, RECOMMENDED FOR SOLDER PASTE (Reflow soldering) CASE CODE THICKNESS in μm 0402 75 to 90 0603 150 to 200 0805 150 to 200 1206 150 to 200 1210 150 to 200 6.3 TYPICAL TEMPERATURE PROFILE FOR REFLOW SOLDERING (Boardflex test) LEAD (Pb)-FREE SOLDERING PROFILE 300 MIN. 300 s MIN. 255 °C MAX. 260 °C TEMPERATURE (°C) 250 T (SOLID) MIN. 217 °C MIN. 190 °C 200 MIN. 40 s MIN. 90 s 150 100 RAMP DOWN FROM T (SOLID) MAX. 6 K/s RAMP UP TO 150 °C MAX. 3 K/s 50 MIN. 110 s 0 0 Revision: 01-Mar-2022 50 100 150 200 250 300 350 400 TIME (s) Document Number: 45256 18 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ....32 Lead-Bearing Finish MLCCs www.vishay.com Vishay Vitramon 6.4 MOUNTING, DIMENSIONS, AND TESTING Mounting SMD under test Printed board before test 1.6 ± 0.1 + R=3 + 45 ± 2 Support Solder 90 ± 1 Testing Width 20 Material: aluminum Width = actual width of substrate + 5 mm on both sides Radius 1 to 2 10 ± 0.1 Printed board during test + + Displacement D = min. 2 mm All dimensions in mm 6.5 PERFORMANCE OF THE TEST(S) A) Electrical test according to component specification (Cap, DF, IR) B) Mounting to PCB C) Storage at room temperature (min. 10 h) D) Board flex test 6.6 DETAILS X7R PCB to be deflected continuously, speed 1 mm/s (± 0.5 mm/s) C0G PCB to be deflected in steps until cracks or other damages are visible or can be measured. Dwell time between steps: (5 ± 1) s 6.7 FAILURE CRITERIA X7R Piezoelectric sensor, no failure up to min. 2 mm C0G (NP0) ΔC/C < 1 % or < 1 pF, no failure up to min. 2 mm Both Electrical test according to component specification Revision: 01-Mar-2022 Document Number: 45256 19 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VJ....32 Lead-Bearing Finish MLCCs www.vishay.com Vishay Vitramon 7 - QUALIFICATION TESTING NO. TEST ITEM REFERENCE 1 Pre- and post stress electrical test User spec 3 High temp exposure (storage) MIL-STD-202, method 108 4 Temperature cycling JESD22, method JA-104 5 Destructive physical analysis EIA-469 6 Moisture resistance MIL-STD-202, method 106 7 Biased humidity MIL-STD-202, method 103 8 Operation life MIL-STD-202 method 108 9 External Visual MIL-STD-883 method 2009 10 Physical dimension JESD22, method JB-100 13 Mechanical shock MIL-STD-202, method 213 14 Vibration MIL-STD-202, method 204 15 Resistance to solder heat MIL-STD-202, method 210 16 ESD AEC-Q200-002 17 Solderability J-STD-002 20 Electrical characterization User spec 21 Board flex AEC-Q200-005 22 Terminal strength AEC-Q200-006 23 Beam load AEC-Q200-003 Revision: 01-Mar-2022 Document Number: 45256 20 For technical questions, contact: mlcc@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party website or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2022 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2022 1 Document Number: 91000